Energy Efficiency Resources for Undergraduate Engineering Education: Final Report

This report presents the findings of an investigation of energy efficiency resources for undergraduate engineering education, undertaken by web-based research, conversations with educators, and a university survey. The investigation draws on the results of a number of previous investigations undertaken by the research team for NFEE related to energy efficiency education and presents the following findings and recommendations, as explained in greater detail in the body of the report. The findings suggest that even though certain EE concepts and principles have been identified by lecturers as being important there is little to no coverage of a number of these concepts in some programs/courses. Similarly, many topics relating to the most important EE workforce skills and significant shortages as identified in industry research, do not rate highly in terms of both perceived importance by lecturers, or coverage within existing courses. Overall, these findings suggest that despite growing awareness of the importance of EE in both industry and academia, the current depth and breadth of EE content in courses does not reflect this. It confirms that efforts in these areas can be better supported.

Changing views of culture, learning, teaching, and knowledge : Fiji in-service primary teachers

This paper explores in-service primary teachers' views and beliefs about culture, learning, teaching and knowledge. Fifty Bachelor of Education in-service primary teachers at a university in Fiji participated in the study. The analysis reveals a mix of old and new beliefs about culture, learning teaching and knowledge. The influence of globalization of technology is a contributing factor towards changing views. To keep the indigenous epistemologies alive and valued like the Western epistemologies, more effort is needed to integrate these in formal education. This has implications for the future professional preparation of pre-service and in-service teachers.

Project-based civil engineering courses

Problem solving is an essential element of civil engineering education. It has been observed that students are best able to understand civil engineering theory when there is a practical application of it. Teaching theory alone has led to lower levels of comprehension and motivation and a correspondingly higher rate of failure and “drop-out”. This paper analyses the effectiveness of introducing practical design projects at an early stage within a civil engineering undergraduate program at Queensland University of Technology. In two of the essential basic subjects, Engineering Mechanics and Steel Structures, model projects which simulate realistic engineering exercises were introduced. Students were required to work in small groups to analyse, design and build the lightest / most efficient model bridges made of specific materials such as spaghetti, drinking straw, paddle pop sticks and balsa wood and steel columns for a given design loading/target capacity. The paper traces the success of the teaching strategy at each stage from its introduction through to the final student and staff evaluation.

Workplace Learning in Physical Education : Emerging Teachers’ Stories from the Staffroom and Beyond

Pre-service and beginning teachers have to negotiate an unfamiliar and often challenging working environment, in both teaching spaces and staff spaces. Workplace Learning in Physical Education explores the workplace of teaching as a site of professional learning. Using stories and narratives from the experiences of pre-service and beginning teachers, the book takes a closer look at how professional knowledge is developed by investigating the notions of ‘professional’ and ‘workplace learning’ by drawing on data from a five year project. The book also critically examines the literature associated with, and the rhetoric that surrounds ‘the practicum’, ‘fieldwork’ ‘school experience’ and the ‘induction year’. The book is structured around five significant dimensions of workplace learning: Social tasks of teaching and learning to teach Performance, practice and praxis Identity, subjectivities and the profession/al Space and place for, and of, learning Micropolitics As well as identifying important implications for policy, practice and research methodology in physical education and teacher education, the book also shows how research can be a powerful medium for the communication of good practice. This is an important book for all students, pre-service and beginning teachers working in physical education, for academics researching teacher workspaces, and for anybody with an interest in the wider themes of teacher education, professional practice and professional learning in the workplace.

Multi-level neural modelling : an application of object-oriented software engineering

Neu-Model, an ongoing project aimed at developing a neural simulation environment that is extremely computationally powerful and flexible, is described. It is shown that the use of good Software Engineering techniques in Neu-Model’s design and implementation is resulting in a high performance system that is powerful and flexible enough to allow rigorous exploration of brain function at a variety of conceptual levels.

Shared values : diverse perspectives – engaging engineering educators in integrating Indigenous engineering knowledge into current curricula

BACKGROUND Engineering is a problem-based practically oriented discipline, whose practitioners aim to find effective solutions to engineering challenges, technically and economically. Engineering educators operate within a mandate to ensure that graduate engineers understand the practicalities and realities of good engineering practice. While this is a vital goal for the discipline, emerging influences are challenging the focus on ‘hard practicalities’ and requiring recognition of the cultural and social aspects of engineering. Expecting graduate engineers to possess communication skills essential for negotiating satisfactory outcomes in contexts of complex social beliefs about the impact of their work can be an unsettling and challenging prospect for engineering educators. This project identifies and addresses Indigenous engineering practices and principles, and their relevance to future engineering practices. PURPOSE This Office of Learning and Teaching (OLT) project proposes that what is known/discoverable about indigenous engineering knowledge and practices must be integrated into engineering curricula. This is an important aspect of ensuring that engineering as a profession responds competently to increasing demands for socially and environmentally responsible activity across all aspects of engineering activity. DESIGN/METHOD The project addresses i) means for appropriate inclusion of Indigenous students into usual teaching activities ii) assuring engineering educators have access to knowledge of Indigenous practices and skills relevant to particular engineering courses and topics iii) means for preparing all students to negotiate their way through issues of indigenous relationships with the land where engineering projects are planned. The project is undertaking wide-ranging research to collate knowledge about indigenous engineering principles and practices and develop relevant resource materials. RESULTS It is common to hear that such social issues as ‘Indigenous concerns’ are only of concern to environmental engineers. We challenge that perspective, and make the case that Indigenous knowledge is an important issue for all engineering educators in relation to effective integration of indigenous students and preparation of all engineering graduates to engage with indigenous communities. At the time of first contact, a rich and varied, technically literate, Indigenous social framework possessed knowledge of the environment that is not yet fully acknowledged in Australian society. A core outcome of the work will be development of resources relating to Indigenous engineering practices for inclusion in engineering core curricula. CONCLUSIONS A large body of technical knowledge was needed to survive and sustain human society in the complex environment that was Australia before 1788. This project is developing resource materials, and supporting documentation, about that knowledge to enable engineering educators to more easily integrate it into current curricula. The project also aims to demonstrate the importance for graduating engineers to appreciate the existence of diverse perspectives on engineering tasks and learn how to value - and employ - multiple paths to possible solutions.

Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control

Direct writing melt electrospinning is an additive manufacturing technique capable of the layer-by-layer fabrication of highly ordered 3d tissue engineering scaffolds from micron-diameter fibres. The utility of these scaffolds, however, is limited by the maximum achievable height of controlled fibre deposition, beyond which the structure becomes increasingly disordered. A source of this disorder is charge build-up on the deposited polymer producing unwanted coulombic forces. In this study we introduce a novel melt electrospinning platform with dual voltage power supplies to reduce undesirable charge effects and improve fibre deposition control. We produced and characterised several 90° cross-hatched fibre scaffolds using a range of needle/collector plate voltages. Fibre thickness was found to be sensitive only to overall potential and invariant to specific tip/collector voltage. We also produced ordered scaffolds up to 200 layers thick (fibre spacing 1 mm, diameter 40 μm) and characterised structure in terms of three distinct zones; ordered, semi-ordered and disordered. Our in vitro analysis indicates successful cell attachment and distribution throughout the scaffolds, with little evidence of cell death after seven days. This study demonstrates the importance of electrostatic control for reducing destabilising polymer charge effects and enabling the fabrication of morphologically suitable scaffolds for tissue engineering.

Bioprocess engineering of microalgae to produce a variety of consumer products

Microalgae biotechnology has recently emerged into the lime light owing to numerous consumer products that can be harnessed from microalgae. Product portfolio stretches from straightforward biomass production for food and animal feed to valuable products extracted from microalgal biomass, including triglycerides which can be converted into biodiesel. For most of these applications, the production process is moderately economically viable and the market is developing. Considering the enormous biodiversity of microalgae and recent developments in genetic and metabolic engineering, this group of organisms represents one of the most promising sources for new products and applications. With the development of detailed culture and screening techniques, microalgal biotechnology can meet the high demands of food, energy and pharmaceutical industries. This review article discusses the technology and production platforms for development and creation of different valuable consumer products from microalgal biomass.

Large-volume methacrylate monolith for plasmid purification : process engineering approach to synthesis and application

The extent of exothermicity associated with the construction of large-volume methacrylate monolithic columns has somewhat obstructed the realisation of large-scale rapid biomolecule purification especially for plasmid-based products which have proven to herald future trends in biotechnology. A novel synthesis technique via a heat expulsion mechanism was employed to prepare a 40 mL methacrylate monolith with a homogeneous radial pore structure along its thickness. Radial temperature gradient was recorded to be only 1.8 °C. Maximum radial temperature recorded at the centre of the monolith was 62.3 °C, which was only 2.3 °C higher than the actual polymerisation temperature. Pore characterisation of the monolithic polymer showed unimodal pore size distributions at different radial positions with an identical modal pore size of 400 nm. Chromatographic characterisation of the polymer after functionalisation with amino groups displayed a persistent dynamic binding capacity of 15.5 mg of plasmid DNA/mL. The maximum pressure drop recorded was only 0.12 MPa at a flow rate of 10 mL/min. The polymer demonstrated rapid separation ability by fractionating Escherichia coli DH5α-pUC19 clarified lysate in only 3 min after loading. The plasmid sample collected after the fast purification process was tested to be a homogeneous supercoiled plasmid with DNA electrophoresis and restriction analysis.

Process engineering aspects of plasmid-based biopharmaceuticals production : tackling the threatening vaccine shortages to prevent global pandemics

Infectious diseases such as SARS, influenza and bird flu have the potential to cause global pandemics; a key intervention will be vaccination. Hence, it is imperative to have in place the capacity to create vaccines against new diseases in the shortest time possible. In 2004, The Institute of Medicine asserted that the world is tottering on the verge of a colossal influenza outbreak. The institute stated that, inadequate production system for influenza vaccines is a major obstruction in the preparation towards influenza outbreaks. Because of production issues, the vaccine industry is facing financial and technological bottlenecks: In October 2004, the FDA was caught off guard by the shortage of flu vaccine, caused by a contamination in a US-based plant (Chiron Corporation), one of the only two suppliers of US flu vaccine. Due to difficulties in production and long processing times, the bulk of the world's vaccine production comes from very small number of companies compared to the number of companies producing drugs. Conventional vaccines are made of attenuated or modified forms of viruses. Relatively high and continuous doses are administered when a non-viable vaccine is used and the overall protective immunity obtained is ephemeral. The safety concerns of viral vaccines have propelled interest in creating a viable replacement that would be more effective and safer to use.

Mapping geographical knowledge and skills needed for pre-service teachers in teacher education

In Australia, for more than two decades, a ‘social science’ integrated framework was the favoured approach for delivering subjects such as history and geography. However, such interdisciplinary approaches have continued to attract criticism from various parts of the academic and public spheres and since 2009, a return to teaching the disciplines has been heralded as the ‘new’ way forward. Using discourse analysis techniques associated with Foucauldian archaeology, the purpose of this paper is to examine the Australian Curriculum: Geography document to ascertain the discourses necessary for pre-service teachers to enact effective teaching of geography in a primary setting. Then, based on pre-service teachers’ online survey responses, the paper investigates if such future teachers have the knowledge and skills to interpret, deliver and enact the new geography curriculum in primary classrooms. Finally, as teacher educators, our interest lies in preparing pre-service teachers effectively for the classroom so the findings are used to inform the content of a teacher education course for pre-service primary teachers.

Process engineering approach to large-volume methacrylate monolith synthesis for plasmid purification

The construction of large?volume methacrylate monolithic columns for preparative-scale plasmid purification is obstructed by the enormous release of exotherms, thus introducing structural heterogeneity in the monolith pore system. A remarkable radial temperature gradient develops along the monolith thickness, reaching a terminal temperature that supersedes the maximum temperature required for the preparation of a structurally homogeneous monolith. A novel heat expulsion technique is employed to overcome the heat build-up during the synthesis process. The enormous heat build-up is perceived to encompass the heat associated with initiator decomposition and the heat released from free radical-monomer and monomer-monomer interactions. The heat resulting from the initiator decomposition was expelled along with some gaseous fumes before commencing polymerisation in a gradual addition fashion. Characteristics of a 50 mL monolith synthesized using this technique showed an improved uniformity in the pore structure radially along the length on the monolith. Chromatographic characterization of this adsorbent displayed a persistent binding capacity of 14.5 mg pDNA/mL of the adsorbent. The adsorbent was able to fractionate a clarified bacteria lysate in only 3 min (after loading) into RNA, protein and pDNA respectively. The pDNA fraction obtained was analyzed to be a homogeneous supercoiled pDNA.

The Games Concept Approach (GCA) as a mandated practice : views of Singaporean teachers

This paper reports on the views of Singaporean teachers of a mandated curriculum innovation aimed at changing the nature of games pedagogy within the physical education curriculum framework in Singapore. Since its first appearance over 20 years ago, Teaching Games for Understanding (TGfU), as an approach to games pedagogy has gathered support around the world. Through a process of evolution TGfU now has many guises and one of the latest of these is the Games Concept Approach (GCA) a name given to this pedagogical approach in Singapore. As part of a major national curricular reform project the GCA was identified as the preferred method of games teaching and as a result was mandated as required professional practice within physical education teaching. To prepare teachers for the implementation phase, a training program was developed by the National Institute of Education in conjunction with the Ministry of Education and well known experts in the field from the United States. For this part of the study, 22 teachers from across Singapore were interviewed. The data were used to create three fictional narratives, a process described by Sparkes (2002a) and used more recently by Ryan (2005) in the field of literacy. The stories were framed using Foucault’s (1980/1977) notion of governmentality and Bernstein’s (1996) notion of regulative discourse. The narratives reveal tales of confusion, frustration but also of hope and enthusiasm.