Aniseikonia tests: The role of viewing mode, response bias, and size-color illusions.

PURPOSE To identify the factors responsible for the poor validity of the most common aniseikonia tests, which involve size comparisons of red-green stimuli presented haploscopically. METHODS Aniseikonia was induced by afocal size lenses placed before one eye. Observers compared the sizes of semicircles presented haploscopically via color filters. The main factor under study was viewing mode (free viewing versus short presentations under central fixation). To eliminate response bias, a three-response format allowed observers to respond if the left, the right, or neither semicircle appeared larger than the other. To control decisional (criterion) bias, measurements were taken with the lens-magnified stimulus placed on the left and on the right. To control for size-color illusions, measurements were made with color filters in both arrangements before the eyes and under binocular vision (without color filters). RESULTS Free viewing resulted in a systematic underestimation of lens-induced aniseikonia that was absent with short presentations. Significant size-color illusions and decisional biases were found that would be mistaken for aniseikonia unless appropriate action is taken. CONCLUSIONS To improve their validity, aniseikonia tests should use short presentations and include control conditions to prevent contamination from decisional/response biases. If anaglyphs are used, presence of size-color illusions must be checked for. TRANSLATIONAL RELEVANCE We identified optimal conditions for administration of aniseikonia tests and appropriate action for differential diagnosis of aniseikonia in the presence of response biases or size-color illusions. Our study has clinical implications for aniseikonia management.

Las expresiones murales: narrativas y silencios para construir el diálogo

Los sentidos y criterios pedagógicos que subyacen en las expresiones murales, en tanto territorios grabados por los lengua­jes de la memoria, tienen como horizonte de interpretación las narrativas y silencios. Desde allí el diálogo emerge como verifica­ción de la trascendentalidad intersubjetiva asumida como arista metodológica que logra ubicar la experiencia de encuentro con la imagen del muro en su vitalidad narrativa, dentro de la investigación fe­nomenológica, en la cual la epistemología es memoria, resignificación y depuración del sujeto en el lenguaje como efecto de la construcción dialógica que supera las colocaciones en el espacio y el tiempo, así como los presupuestos y prejuicios frente a la lectura y la escritura del mundo, de la vida y de la cotidianidad. Sobre estas premisas, la perspectiva situacional de la pedagogía reconoce en la pregunta una condición vivencial y dis­cursiva que testimonia el compromiso del maestro con los fenómenos de la realidad socio-histórica, de la cual el muro es expre­sión de evocación y creación de relatos y, a su vez, trayecto de interpretación en la experiencia finita de la existencia, donde la educación y el maestro encuentran ra­zones para emprender nuevas lecturas y escrituras del mundo desde una posición en resistencia con la impunidad y el crimen

Influence du vieillissement et de la scolarité sur la compréhension du discours : apport de l’imagerie optique

La compréhension du discours, et son évolution au cours du vieillissement, constitue un sujet d’une grande importance par sa complexité et sa place dans la préservation de la qualité de vie des aînés. Les objectifs de cette thèse étaient d’évaluer l’influence du vieillissement et du niveau de scolarité sur les capacités de compréhension du discours et sur l’activité cérébrale s’y rattachant. Pour ce faire, trois groupes (jeunes adultes ayant un niveau universitaire de scolarité, personnes âgées ayant un niveau universitaire de scolarité et personnes âgées ayant un niveau secondaire de scolarité) ont réalisé une tâche où ils devaient lire de courtes histoires, puis estimer la véracité d’une affirmation concernant cette histoire. Les capacités de compréhension correspondant aux traitements de trois niveaux du modèle de construction-intégration de Kintsch (la microstructure, la macrostructure et le modèle de situation) ont été évaluées. L’imagerie optique (NIRS) a permis d’estimer les variations d’oxyhémoglobine (HbO) et de déoxyhémoglobine (HbR) tout au long de la tâche. Les résultats ont démontré que les personnes âgées étaient aussi aptes que les plus jeunes pour rappeler la macrostructure (essentiel du texte), mais qu’ils avaient plus de difficulté à rappeler la microstructure (détails) et le modèle de situation (inférence et intégration) suite à la lecture de courts textes. Lors de la lecture, les participants plus âgés ont également montré une plus grande activité cérébrale dans le cortex préfrontal dorsolatéral gauche, ce qui pourrait être un mécanisme de compensation tel que décrit dans le modèle CRUNCH. Aucune différence significative n’a été observée lors de la comparaison des participants âgés ayant un niveau universitaire de scolarité et ceux ayant un niveau secondaire, tant au niveau des capacités de compréhension que de l’activité cérébrale s’y rattachant. Les deux groupes ont cependant des habitudes de vie stimulant la cognition, entre autres, de bonnes habitudes de lecture. Ainsi, ces habitudes semblent avoir une plus grande influence que l’éducation sur les performances en compréhension et sur l’activité cérébrale sous-jacente. Il se pourrait donc que l’éducation influence la cognition en promouvant des habitudes favorisant les activités cognitives, et que ce soit ces habitudes qui aient en bout ligne un réel impact sur le vieillissement cognitif.

Hábito lector en niños de edad escolar de 9 a 10 años

La presente investigación que lleva como título: “Hábito lector en niños de edad escolar de 9 a 10 años”, fue realizada en la Unidad Educativa Tres de Noviembre de la ciudad de Cuenca- Ecuador en febrero del 2016, tuvo como principal objetivo el de determinar el hábito lector que poseen los niños y niñas de esta edad, además de constatar los factores asociados que repercuten en la actividad lectora. Para cumplir con este propósito, se enmarcó la realización de este estudio dentro de la investigación cuantitativa de carácter transversal, donde se procedió a trabajar con una muestra de 117 niños y niñas, a quienes se les aplicó la encuesta sobre hábitos lectores de Yubero y Larrañaga (2010). Los principales datos obtenidos en esta investigación, demostraron que la mayoría de niños y niñas participantes en este trabajo mantienen un adecuado desarrollo del hábito lector, además los encuestados manifestaron que la actividad lectora les gustaba mucho; por otra parte en lo que concierne a los factores asociados al hábito lector se llegó a establecer la influencia que tiene la familia y el contexto escolar en promover la lectura en la población estudiada.

Impacto do treinamento no trabalho : atividades operacionais da Polícia Federal

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Economia, Administração e Contabilidade, Programa de Pós-Graduação em Administração, Mestrado Profissional em Administração, 2015.

L’influence de la perte d’un parent et du deuil chez l’élève de niveau primaire sur sa réussite scolaire

La réussite scolaire au primaire est déterminante pour la réussite scolaire future de l’enfant. Certains éléments jouent un rôle important dans cette réussite comme la santé psychologique de l’élève et l’implication parentale. Ces dernières peuvent être ébranlées par certaines situations de la vie telle que le décès d’un parent. Ce mémoire porte sur une recherche qualitative effectuée auprès de trois élèves de niveau primaire régulier ayant perdu un parent au cours des deux dernières années. L’objectif de cette recherche est de connaître l’influence que peuvent avoir la perte parentale et le deuil chez l’élève sur sa réussite scolaire. Il existe peu de recherches qui ont été réalisées sur ce sujet et la plupart se sont principalement intéressées à l’influence des conséquences psychologiques du deuil sur la réussite scolaire. Dans le cadre de ce mémoire, nous avons décidé d’adopter une vision plus globale du développement de l’élève. Le projet de recherche s’intéresse non seulement à l’élève, mais aussi à ses parents et à son environnement scolaire. La recherche s’articule autour de trois concepts : le deuil, la réussite scolaire et l’implication scolaire. La méthodologie utilisée repose sur une approche qualitative exploratoire et une analyse de contenu. Les participants étaient composés de trois élèves endeuillés et non-immigrants, âgés entre 7 et 10 ans, de leurs parents survivants (deux) et de leurs enseignants titulaires (trois). Les données ont été recueillies à travers des entrevues semi-dirigées avec tous les participants, les bulletins scolaires des enfants et les plans d’intervention scolaire. Les résultats indiquent que les conséquences psychologiques du deuil peuvent avoir une influence négative sur la réussite scolaire des élèves du primaire. De plus, la perte parentale semble influer négativement sur le niveau socio-économique de la famille et sur tous les types d’implication parentale, que ce soit la supervision des leçons, la communication école-famille ou la collaboration du parent avec la communauté. Ces éléments peuvent à leur tour avoir une influence négative sur la réussite scolaire.

O impacto das Bibliotecas Escolares na promoção dos Hábitos de Leitura

Dada a importância que é atribuída à leitura, entendida como ferramenta essencial para a plena inserção dos cidadãos na sociedade, a luta pela melhoria dos níveis de leitura e literacia da população portuguesa tornou-se um desígnio nacional bastante enfatizado nas últimas décadas. Vários estudos sobre hábitos de leitura efectuados na década de 80/90, quer a nível nacional quer internacional, vieram pôr a descoberto as fragilidades de Portugal e o seu atraso em relação aos restantes países da Europa. Os portugueses não revelavam as competências necessárias para ter sucesso na sociedade da informação. O sistema educativo tem um papel chave na mudança que é urgente operar, residindo os alicerces dessa mudança na promoção da leitura e da literacia. É neste contexto que surge a criação da Rede de Bibliotecas Escolares, lançada em 1996, como medida conjunta do Ministério da Educação e da Cultura, com vista a criar condições para que os portugueses pudessem alcançar níveis de leitura mais favoráveis e mais próximos dos restantes países europeus. A promoção da leitura passa a ser uma área de intervenção prioritária das bibliotecas escolares em Portugal. Face aos baixos níveis de literacia dos alunos portugueses, revelados pelo PISA 2000, o governo dá continuidade às suas políticas de promoção da leitura e da literacia. No ano de 2007 é apresentado o Plano Nacional de Leitura (PNL), fazendo-se o apelo à mobilização de todos como condição essencial para a sua eficácia - elevar os níveis de literacia dos portugueses. É importante dar nota que o PNL e as Bibliotecas Escolares estão fortemente conectados, funcionando estas como os “alicerces” que suportam o desenvolvimento dos projectos do PNL. Os resultados desta “parceria” e de todas as iniciativas com vista à promoção da leitura e da literacia têm-se revelado bastante profícuos, e a prová-lo estão os resultados do PISA 2009. Tendo os anos de 2000 e 2009 como domínio de referência a leitura, constatou-se que nesse período de tempo houve uma clara melhoria dos níveis de literacia dos portugueses. Não obstante uma ligeira descida verificada nos resultados do ano de 2012, a OCDE sublinhou as melhorias que o país obteve desde que começou a ser avaliado. No entanto, julgamos pertinente dar nota que, para além desta evolução se ter verificado não apenas em Portugal, há países que evoluíram de forma muito mais acelerada, encontrando-se numa posição mais favorável que Portugal (25º posição), no ranking dos países da OCDE. Com o estudo que aqui apresentamos, baseado na análise de um universo de 8 bibliotecas escolares do concelho de Felgueiras, pretendemos conhecer a realidade destas bibliotecas dentro do contexto nacional. Foi nosso objetivo verificar se cumprem o seu papel na promoção dos hábitos de leitura e da literacia, de que forma o fazem, e as dificuldades concretas com que se deparam. As conclusões apontam-nos para uma realidade que não difere muito da realidade das restantes bibliotecas do país, das quais temos conhecimento. Os professores bibliotecários cumprem o seu papel na promoção dos hábitos de leitura, deparando-se com a falta de apoio de meios humanos, aspecto que se tem agravado de forma preocupante nos últimos anos. A conjuntura atual de desinvestimento nos serviços públicos, não poderia deixar de se fazer sentir. Constatamos no entanto que, apesar das adversidades, as BEs não se reduzem a meros centros de recursos e a locais de lazer para quem as queira visitar. Têm um papel ativo, tomam incitativas diversas de promoção da leitura / literacia, nos moldes definidos pelo MABE, com estímulo à leitura autónoma. Procuram articular as suas acções com os docentes e, em simultâneo, vencer a relativa indiferença e desinteresse destes pela biblioteca, motivando-os para as suas actividades e procurando levá-los a ver na BE um parceiro ativo, capaz de os apoiar na concretização dos programas curriculares e na análise de resultados escolares dos alunos como base para delinear estratégias pedagógicas comuns. Por fim, constatamos que apesar de as BEs procurarem integrar nas suas atividades a comunidade exterior à escola, a adesão, sobretudo das famílias, tem sido débil: os encarregados de educação aderem relativamente bem ao papel de público passivo, mas não assumem o papel de interlocutores ativos, como se pretende. Estas conclusões, ousamos dizer, remetem-nos para a necessidade urgente de uma reflexão séria por parte do Estado Português, em relação à Educação e às suas prioridades.

L’influence de la perte d’un parent et du deuil chez l’élève de niveau primaire sur sa réussite scolaire

La réussite scolaire au primaire est déterminante pour la réussite scolaire future de l’enfant. Certains éléments jouent un rôle important dans cette réussite comme la santé psychologique de l’élève et l’implication parentale. Ces dernières peuvent être ébranlées par certaines situations de la vie telle que le décès d’un parent. Ce mémoire porte sur une recherche qualitative effectuée auprès de trois élèves de niveau primaire régulier ayant perdu un parent au cours des deux dernières années. L’objectif de cette recherche est de connaître l’influence que peuvent avoir la perte parentale et le deuil chez l’élève sur sa réussite scolaire. Il existe peu de recherches qui ont été réalisées sur ce sujet et la plupart se sont principalement intéressées à l’influence des conséquences psychologiques du deuil sur la réussite scolaire. Dans le cadre de ce mémoire, nous avons décidé d’adopter une vision plus globale du développement de l’élève. Le projet de recherche s’intéresse non seulement à l’élève, mais aussi à ses parents et à son environnement scolaire. La recherche s’articule autour de trois concepts : le deuil, la réussite scolaire et l’implication scolaire. La méthodologie utilisée repose sur une approche qualitative exploratoire et une analyse de contenu. Les participants étaient composés de trois élèves endeuillés et non-immigrants, âgés entre 7 et 10 ans, de leurs parents survivants (deux) et de leurs enseignants titulaires (trois). Les données ont été recueillies à travers des entrevues semi-dirigées avec tous les participants, les bulletins scolaires des enfants et les plans d’intervention scolaire. Les résultats indiquent que les conséquences psychologiques du deuil peuvent avoir une influence négative sur la réussite scolaire des élèves du primaire. De plus, la perte parentale semble influer négativement sur le niveau socio-économique de la famille et sur tous les types d’implication parentale, que ce soit la supervision des leçons, la communication école-famille ou la collaboration du parent avec la communauté. Ces éléments peuvent à leur tour avoir une influence négative sur la réussite scolaire.

Niveles de actividad física de niños y adolescentes durante las clases de educación física en tres colegios oficiales de Bogotá

La clase de educación física es un espacio en el cual los niños y adolescentes pueden incrementar los niveles de actividad física y alcanzar las recomendaciones emitidas por la Organización Mundial de la Salud (OMS), sin embargo, existe poca evidencia científica a nivel nacional sobre las actividades físicas que realizan los estudiantes dentro del ámbito escolar, específicamente dentro de las clases de educación física y sus relaciones con el contexto; es por esto que el objetivo de este estudio fue evaluar los niveles de actividad física de niños y adolescentes durante las clases de educación física en tres colegios oficiales de Bogotá, Colombia, por medio de la herramienta SOFIT. Estudio de diseño descriptivo y transversal realizado entre octubre de 2014 y mayo de 2015. Las observaciones se llevaron a cabo en tres colegios oficiales de la ciudad de Bogotá ubicados en las localidades de Tunjuelito y Ciudad Bolívar que aceptaron su participación en la investigación. Se obtuvo la aprobación para participar de 1361 estudiantes (682 niñas y 679 niños) de 5 a 17 años de los cuales 180 estudiantes (93 niños y 87 niñas) fueron seleccionados de manera aleatoria sistemática, siguiendo el protocolo SOFIT para observar su nivel de actividad física durante las clases de educación física. El 45,23% del tiempo de la clase de educación física los estudiantes mantuvieron un comportamiento sedentario; mientras que el 30.91% y el 23.86% del tiempo de la clase presentaron un nivel de actividad física moderada (AFM) y vigorosa (AFV) respectivamente. El nivel de actividad física moderada a vigorosa (AFMV), fue de 54,78% es decir, 35,27 minutos de la clase. Los docentes no promovieron la actividad física en un 56,47% del tiempo de la clase y se encontró que ningún docente promovió la actividad física fuera de la clase, es decir, alentando a sus estudiantes a que practicaran cualquier forma de actividad física en horas extraescolares. El contexto de la clase que más se desarrolló fue la condición física con un 35,66% del tiempo de la clase, seguido por los contextos de generalidades 24,83% y habilidades 23,84%. El contexto de la clase generalidades está asociada significativamente y de manera negativa (β=-0,32, p=0,006) con menor porcentaje de tiempo en AFM y AFV, las variables activas de SOFIT, lo que sugiere que las clases deben invertir menos tiempo en este contexto e incrementar el porcentaje de tiempo en los otros contextos como condición física y habilidades para aumentar la cantidad de minutos de AFMV en los estudiantes.

Efectos de una intervención educativa en los conocimientos y comportamientos relacionados con la fotoprotección durante la práctica de la actividad física en los estudiantes de un colegio público de Bogotá D.C., Colombia

Introducción: La incidencia del cáncer de piel melanoma y no melanoma es un problema de salud pública a nivel mundial. El incremento en la incidencia del cáncer de piel en los últimos años se debe a múltiples factores como: cambios en los estilos de vida, el envejecimiento de la población, cambios ambientales, el desconocimiento a la exposición a la radiación ultravioleta (RUV) durante la práctica de actividad física sin elementos de fotoprotección, siendo éste último reconocido como el principal factor de riesgo. Objetivo: Evaluar los efectos de una intervención educativa en los conocimientos y comportamientos relacionados con la fotoprotección durante la práctica de la actividad física en estudiantes de un colegio público de Bogotá D.C., Colombia. Métodos: Estudio de intervención, antes y después, no controlado en 281 estudiantes de los grados noveno, décimo y once de estratos 1-3 de un colegio público de Bogotá, con seguimiento a 1, 3 y 6 meses post-intervención. Se evaluaron los conocimientos y los hábitos de fotoprotección mediante un cuestionario Cancer Awareness Measure (CAM) y el modelo Transteórico de cambio comportamental de Prochaska y Di Clemente. El estudio se realizó durante el primer semestre de 2015 con 4 sesiones educativas de 60 minutos apoyadas con material audiovisual y pedagógico, acorde a la Guía para la Comunicación Educativa en el marco el control del cáncer publicada por el Instituto Nacional de Cancerología. Resultados: Del grupo de estudiantes que participaron del estudio, el 52,3% eran hombres, el promedio de edad fue de 15,46 ± 1,2 años. El tipo de piel predominante fue la trigueña con 65,8%. La intervención educativa produjo cambios significativos en los conocimientos de foto protección, finalizado el seguimiento al sexto mes. En cuanto a la prevención los estudiantes refirieron tener conocimiento de cómo examinar su piel en el momento basal (12,5% n=35), presentándose un aumento significativo de 62,6% (n=211) al sexto mes (p<0,05). Conclusión: El estudio demostró la efectividad de la intervención educativa, evidenciando cambios significativos en los conocimientos en fotoprotección y comportamientos preventivos del cáncer de piel durante la práctica de la actividad física en estudiantes de un colegio público de Bogotá D.C., Colombia.

Flexural behaviour and design of the new built-up LiteSteel beams

LiteSteel Beam (LSB) is a new cold-formed steel beam produced by OneSteel Australian Tube Mills. The new beam is effectively a channel section with two rectangular hollow flanges and a slender web, and is manufactured using a combined cold-forming and electric resistance welding process. OneSteel Australian Tube Mills is promoting the use of LSBs as flexural members in a range of applications, such as floor bearers. When LSBs are used as back to back built-up sections, they are likely to improve their moment capacity and thus extend their applications further. However, the structural behaviour of built-up beams is not well understood. Many steel design codes include guidelines for connecting two channels to form a built-up I-section including the required longitudinal spacing of connections. But these rules were found to be inadequate in some applications. Currently the safe spans of builtup beams are determined based on twice the moment capacity of a single section. Research has shown that these guidelines are conservative. Therefore large scale lateral buckling tests and advanced numerical analyses were undertaken to investigate the flexural behaviour of back to back LSBs connected by fasteners (bolts) at various longitudinal spacings under uniform moment conditions. In this research an experimental investigation was first undertaken to study the flexural behaviour of back to back LSBs including its buckling characteristics. This experimental study included tensile coupon tests, initial geometric imperfection measurements and lateral buckling tests. The initial geometric imperfection measurements taken on several back to back LSB specimens showed that the back to back bolting process is not likely to alter the imperfections, and the measured imperfections are well below the fabrication tolerance limits. Twelve large scale lateral buckling tests were conducted to investigate the behaviour of back to back built-up LSBs with various longitudinal fastener spacings under uniform moment conditions. Tests also included two single LSB specimens. Test results showed that the back to back LSBs gave higher moment capacities in comparison with single LSBs, and the fastener spacing influenced the ultimate moment capacities. As the fastener spacing was reduced the ultimate moment capacities of back to back LSBs increased. Finite element models of back to back LSBs with varying fastener spacings were then developed to conduct a detailed parametric study on the flexural behaviour of back to back built-up LSBs. Two finite element models were developed, namely experimental and ideal finite element models. The models included the complex contact behaviour between LSB web elements and intermittently fastened bolted connections along the web elements. They were validated by comparing their results with experimental results and numerical results obtained from an established buckling analysis program called THIN-WALL. These comparisons showed that the developed models could accurately predict both the elastic lateral distortional buckling moments and the non-linear ultimate moment capacities of back to back LSBs. Therefore the ideal finite element models incorporating ideal simply supported boundary conditions and uniform moment conditions were used in a detailed parametric study on the flexural behaviour of back to back LSB members. In the detailed parametric study, both elastic buckling and nonlinear analyses of back to back LSBs were conducted for 13 LSB sections with varying spans and fastener spacings. Finite element analysis results confirmed that the current design rules in AS/NZS 4600 (SA, 2005) are very conservative while the new design rules developed by Anapayan and Mahendran (2009a) for single LSB members were also found to be conservative. Thus new member capacity design rules were developed for back to back LSB members as a function of non-dimensional member slenderness. New empirical equations were also developed to aid in the calculation of elastic lateral distortional buckling moments of intermittently fastened back to back LSBs. Design guidelines were developed for the maximum fastener spacing of back to back LSBs in order to optimise the use of fasteners. A closer fastener spacing of span/6 was recommended for intermediate spans and some long spans where the influence of fastener spacing was found to be high. In the last phase of this research, a detailed investigation was conducted to investigate the potential use of different types of connections and stiffeners in improving the flexural strength of back to back LSB members. It was found that using transverse web stiffeners was the most cost-effective and simple strengthening method. It is recommended that web stiffeners are used at the supports and every third points within the span, and their thickness is in the range of 3 to 5 mm depending on the size of LSB section. The use of web stiffeners eliminated most of the lateral distortional buckling effects and hence improved the ultimate moment capacities. A suitable design equation was developed to calculate the elastic lateral buckling moments of back to back LSBs with the above recommended web stiffener configuration while the same design rules developed for unstiffened back to back LSBs were recommended to calculate the ultimate moment capacities.

Analyzing real-time video microscopy : the dynamics and geometry of vesicles and tubules in endocytosis

With the advent of live cell imaging microscopy, new types of mathematical analyses and measurements are possible. Many of the real-time movies of cellular processes are visually very compelling, but elementary analysis of changes over time of quantities such as surface area and volume often show that there is more to the data than meets the eye. This unit outlines a geometric modeling methodology and applies it to tubulation of vesicles during endocytosis. Using these principles, it has been possible to build better qualitative and quantitative understandings of the systems observed, as well as to make predictions about quantities such as ligand or solute concentration, vesicle pH, and membrane trafficked. The purpose is to outline a methodology for analyzing real-time movies that has led to a greater appreciation of the changes that are occurring during the time frame of the real-time video microscopy and how additional quantitative measurements allow for further hypotheses to be generated and tested.

Structural behaviour and design of cold-formed steel wall systems under fire conditions

In recent times, light gauge steel framed (LSF) structures, such as cold-formed steel wall systems, are increasingly used, but without a full understanding of their fire performance. Traditionally the fire resistance rating of these load-bearing LSF wall systems is based on approximate prescriptive methods developed based on limited fire tests. Very often they are limited to standard wall configurations used by the industry. Increased fire rating is provided simply by adding more plasterboards to these walls. This is not an acceptable situation as it not only inhibits innovation and structural and cost efficiencies but also casts doubt over the fire safety of these wall systems. Hence a detailed fire research study into the performance of LSF wall systems was undertaken using full scale fire tests and extensive numerical studies. A new composite wall panel developed at QUT was also considered in this study, where the insulation was used externally between the plasterboards on both sides of the steel wall frame instead of locating it in the cavity. Three full scale fire tests of LSF wall systems built using the new composite panel system were undertaken at a higher load ratio using a gas furnace designed to deliver heat in accordance with the standard time temperature curve in AS 1530.4 (SA, 2005). Fire tests included the measurements of load-deformation characteristics of LSF walls until failure as well as associated time-temperature measurements across the thickness and along the length of all the specimens. Tests of LSF walls under axial compression load have shown the improvement to their fire performance and fire resistance rating when the new composite panel was used. Hence this research recommends the use of the new composite panel system for cold-formed LSF walls. The numerical study was undertaken using a finite element program ABAQUS. The finite element analyses were conducted under both steady state and transient state conditions using the measured hot and cold flange temperature distributions from the fire tests. The elevated temperature reduction factors for mechanical properties were based on the equations proposed by Dolamune Kankanamge and Mahendran (2011). These finite element models were first validated by comparing their results with experimental test results from this study and Kolarkar (2010). The developed finite element models were able to predict the failure times within 5 minutes. The validated model was then used in a detailed numerical study into the strength of cold-formed thin-walled steel channels used in both the conventional and the new composite panel systems to increase the understanding of their behaviour under nonuniform elevated temperature conditions and to develop fire design rules. The measured time-temperature distributions obtained from the fire tests were used. Since the fire tests showed that the plasterboards provided sufficient lateral restraint until the failure of LSF wall panels, this assumption was also used in the analyses and was further validated by comparison with experimental results. Hence in this study of LSF wall studs, only the flexural buckling about the major axis and local buckling were considered. A new fire design method was proposed using AS/NZS 4600 (SA, 2005), NAS (AISI, 2007) and Eurocode 3 Part 1.3 (ECS, 2006). The importance of considering thermal bowing, magnified thermal bowing and neutral axis shift in the fire design was also investigated. A spread sheet based design tool was developed based on the above design codes to predict the failure load ratio versus time and temperature for varying LSF wall configurations including insulations. Idealised time-temperature profiles were developed based on the measured temperature values of the studs. This was used in a detailed numerical study to fully understand the structural behaviour of LSF wall panels. Appropriate equations were proposed to find the critical temperatures for different composite panels, varying in steel thickness, steel grade and screw spacing for any load ratio. Hence useful and simple design rules were proposed based on the current cold-formed steel structures and fire design standards, and their accuracy and advantages were discussed. The results were also used to validate the fire design rules developed based on AS/NZS 4600 (SA, 2005) and Eurocode Part 1.3 (ECS, 2006). This demonstrated the significant improvements to the design method when compared to the currently used prescriptive design methods for LSF wall systems under fire conditions. In summary, this research has developed comprehensive experimental and numerical thermal and structural performance data for both the conventional and the proposed new load bearing LSF wall systems under standard fire conditions. Finite element models were developed to predict the failure times of LSF walls accurately. Idealized hot flange temperature profiles were developed for non-insulated, cavity and externally insulated load bearing wall systems. Suitable fire design rules and spread sheet based design tools were developed based on the existing standards to predict the ultimate failure load, failure times and failure temperatures of LSF wall studs. Simplified equations were proposed to find the critical temperatures for varying wall panel configurations and load ratios. The results from this research are useful to both structural and fire engineers and researchers. Most importantly, this research has significantly improved the knowledge and understanding of cold-formed LSF loadbearing walls under standard fire conditions.

Outcomes following operative and non-operative management of humeral midshaft fractures: a prospective, observational cohort study of 47 patients

Background Although the non-operative management of closed humeral midshaft fractures has been advocated for years, the increasing popularity of operative intervention has left the optimal treatment choice unclear. Objective To compare the outcomes of operative and non-operative treatment of traumatic closed humeral midshaft fractures in adult patients. Methods A multicentre prospective comparative cohort study across 20 centres was conducted. Patients with AO type 12 A2, A3 and B2 fractures were treated with a functional brace or a retrograde-inserted unreamed humeral nail. Follow-up measurements were taken at 6, 12 and 52 weeks after the injury. The primary outcome was fracture healing after 1 year. Secondary outcomes included sub-items of the Constant score, general patient satisfaction, complications and cost-effectiveness parameters. Functions of the uninjured extremity were used as reference parameters. Intention-to-treat analysis was applied with the use of t-tests, Fisher’s exact tests, Mann–Whitney U-tests and adjusted analysis of variance (ANOVA). Results Forty-seven patients were included. The patient sample consisted of 23 women and 24 men, with a mean age of 52.7 years (range 17–86 years). Of the 47 cases, 14 were treated non-operatively and 33 operatively. The follow-up rate at 1 year was 81%. After 1 year, 11 fractures (100%) healed in the non-operative group and at least 24 fractures (≥89%) healed in the operative group [1 non-union patient (4%) and no data for 2 patients (7%)]. There were no significant differences in pain, range of motion (ROM) of the shoulder and elbow, and return to work after 6 weeks, 12 weeks and 1 year. Although operatively treated patients showed significantly greater shoulder abduction strength (p = 0.036), elbow flexion strength (p = 0.021), functional hand positioning (p = 0.008) and return to recreational activities (p = 0.043) after 6 weeks, no statistically significant differences existed in any outcome measure at the 1-year follow-up. Conclusions Our findings indicate that the non-operative management of humeral midshaft fractures can be expected to have similar functional outcomes and patient satisfaction at 1 year, despite an early benefit to operative treatment. If no radiological evidence of fracture healing exists in non-operatively treated patients during early follow-up, a switch to surgical treatment results in good functional outcomes and patient satisfaction. Keywords: Humeral shaft fracture, Non-operative treatment, Functional brace, Operative treatment, Unreamed humeral nail (UHN), Prospective, Cohort study

Numerical and experimental studies of cold-formed steel floor systems under standard fire conditions

Light gauge cold-formed steel frame (LSF) structures are increasingly used in industrial, commercial and residential buildings because of their non-combustibility, dimensional stability, and ease of installation. A floor-ceiling system is an example of its applications. LSF floor-ceiling systems must be designed to serve as fire compartment boundaries and provide adequate fire resistance. Fire rated floor-ceiling assemblies formed with new materials and construction methodologies have been increasingly used in buildings. However, limited research has been undertaken in the past and hence a thorough understanding of their fire resistance behaviour is not available. Recently a new composite panel in which an external insulation layer is used between two plasterboards has been developed at QUT to provide a higher fire rating to LSF floors under standard fire conditions. But its increased fire rating could not be determined using the currently available design methods. Research on LSF floor systems under fire conditions is relatively recent and the behaviour of floor joists and other components in the systems is not fully understood. The present design methods thus require the use of expensive fire protection materials to protect them from excessive heat increase during a fire. This leads to uneconomical and conservative designs. Fire rating of these floor systems is provided simply by adding more plasterboard sheets to the steel joists and such an approach is totally inefficient. Hence a detailed fire research study was undertaken into the structural and thermal performance of LSF floor systems including those protected by the new composite panel system using full scale fire tests and extensive numerical studies. Experimental study included both the conventional and the new steel floor-ceiling systems under structural and fire loads using a gas furnace designed to deliver heat in accordance with the standard time- temperature curve in AS 1530.4 (SA, 2005). Fire tests included the behavioural and deflection characteristics of LSF floor joists until failure as well as related time-temperature measurements across the section and along the length of all the specimens. Full scale fire tests have shown that the structural and thermal performance of externally insulated LSF floor system was superior than traditional LSF floors with or without cavity insulation. Therefore this research recommends the use of the new composite panel system for cold-formed LSF floor-ceiling systems. The numerical analyses of LSF floor joists were undertaken using the finite element program ABAQUS based on the measured time-temperature profiles obtained from fire tests under both steady state and transient state conditions. Mechanical properties at elevated temperatures were considered based on the equations proposed by Dolamune Kankanamge and Mahendran (2011). Finite element models were calibrated using the full scale test results and used to further provide a detailed understanding of the structural fire behaviour of the LSF floor-ceiling systems. The models also confirmed the superior performance of the new composite panel system. The validated model was then used in a detailed parametric study. Fire tests and the numerical studies showed that plasterboards provided sufficient lateral restraint to LSF floor joists until their failure. Hence only the section moment capacity of LSF floor joists subjected to local buckling effects was considered in this research. To predict the section moment capacity at elevated temperatures, the effective section modulus of joists at ambient temperature is generally considered adequate. However, this research has shown that it leads to considerable over- estimation of the local buckling capacity of joist subject to non-uniform temperature distributions under fire conditions. Therefore new simplified fire design rules were proposed for LSF floor joist to determine the section moment capacity at elevated temperature based on AS/NZS 4600 (SA, 2005), NAS (AISI, 2007) and Eurocode 3 Part 1.3 (ECS, 2006). The accuracy of the proposed fire design rules was verified with finite element analysis results. A spread sheet based design tool was also developed based on these design rules to predict the failure load ratio versus time, moment capacity versus time and temperature for various LSF floor configurations. Idealised time-temperature profiles of LSF floor joists were developed based on fire test measurements. They were used in the detailed parametric study to fully understand the structural and fire behaviour of LSF floor panels. Simple design rules were also proposed to predict both critical average joist temperatures and failure times (fire rating) of LSF floor systems with various floor configurations and structural parameters under any given load ratio. Findings from this research have led to a comprehensive understanding of the structural and fire behaviour of LSF floor systems including those protected by the new composite panel, and simple design methods. These design rules were proposed within the guidelines of the Australian/New Zealand, American and European cold- formed steel structures standard codes of practice. These may also lead to further improvements to fire resistance through suitable modifications to the current composite panel system.