985 resultados para Detroit-Windsor Tunnel (Detroit, Mich. and Windsor, Canada)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: It is well known that sprint interval training (SIT), induces significant increases in peak oxygen uptake (VO2peak) at the group level. However, there have been only a few studies that have addressed the variability of VO2peak response following SIT, and precise mechanism(s) that may explain individual magnitude of response are unknown. Purpose: Therefore, the purpose of this thesis was to: 1) examine the inter-individual variability of the VO2peak response following SIT, 2) to inspect the relationship between changes in both central and peripheral measures and changes in VO2peak, and 3) to assess if peripheral or central adaptations play a role in whether an individual is a high or low responder with respect to VO2peak. Subjects: Twenty-two young, recreationally active males (age: 20.4 1.7 years; weight: 78.4 10.2 kg; VO2peak: 3.7 0.62 L/min) Methods: VO2peak (L/min), peak cardiac output (Qpeak [L/min]), and peak deoxygenated hemoglobin (HHbpeak [mM]) were measured before and after 16 sessions of SIT (Tabata Protocol) over four weeks. Peak a-vO2diff was calculated using a derivation of the Fick equation. Results: Due to a systematic error, HHbpeak could not be used to differentiate between individual responses. There was a large range of VO2peak response from pre to post testing (-4.75 to 32.18% change) and there was a significant difference between the Low Response Group (LRG) (n=8) and the High Response Group (HRG) (n=8) [f(1, 14)= 64.27, p<0.001]. Furthermore, there was no correlation between delta () VO2peak and Qpeak (r=-0.18, p=0.46) for all participants, nor was there an interaction effect between the Low and High Response Groups [f(1,11)=0.572, p=0.47]. Lastly, there was a significant correlation between VO2peak and peak a-vO2diff [r=0.692, p<0.001], and a significant interaction effect with peak a-vO2diff [f(1, 14)= 13.27, p<0.004] when comparing the HRG to the LRG. Conclusions: There was inter-individual variability of VO2peak response following 4 weeks of SIT, but central adaptations did not influence this variation. This suggests that peripheral adaptations may be responsible for VO2peak adaptation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Thermal and fatigue cracking are the two of the major pavement distress phenomena that contribute significantly towards increased premature pavement failures in Ontario. This in turn puts a massive burden on the provincial budgets as the government spends huge sums of money on the repair and rehabilitation of roads every year. Governments therefore need to rethink and re-evaluate their current measures in order to prevent it in future. The main objectives of this study include: the investigation of fatigue distress of 11 contract samples at 10oC, 15oC, 20oC and 25oC and the use of crack-tip-opening-displacement (CTOD) requirements at temperatures other than 15oC; investigation of thermal and fatigue distress of the comparative analysis of 8 Ministry of Transportation (MTO) recovered and straight asphalt samples through double-edge-notched-tension test (DENT) and extended bending beam rheometry (EBBR); chemical testing of all samples though X-ray Fluorescence (XRF) and Fourier transform infrared analysis (FTIR); Dynamic Shear Rheometer (DSR) higher and intermediate temperature grading; and the case study of a local Kingston road. Majority of 11 contract samples showed satisfactory performance at all temperatures except one sample. Study of CTOD at various temperatures found a strong correlation between the two variables. All recovered samples showed poor performance in terms of their ability to resist thermal and fatigue distress relative to their corresponding straight asphalt as evident in DENT test and EBBR results. XRF and FTIR testing of all samples showed the addition of waste engine oil (WEO) to be the root cause of pavement failures. DSR high temperature grading showed superior performance of recovered binders relative to straight asphalt. The local Kingston road showed extensive signs of damage due to thermal and fatigue distress as evident from DENT test, EBBR results and pictures taken in the field. In the light of these facts, the use of waste engine oil and recycled asphalt in pavements should be avoided as these have been shown to cause premature failure in pavements. The DENT test existing CTOD requirements should be implemented at other temperatures in order to prevent the occurrences of premature pavement failures in future.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A functional nervous system requires the precise arrangement of all nerve cells and their neurites. To achieve this correct assembly, a myriad of molecular guidance cues works together to direct the outgrowth of neurites to their correct positions. The small nematode C. elegans provides the ideal model system to study the complex mechanisms of neurite guidance due to its relatively simple nervous system, composed of 302 neurons. I used two mechanosensory neurons, called the posterior lateral microtubule (PLM), to investigate the role of the ephrin and Eph receptor protein family in neurite termination in C. elegans. Activation of the C. elegans Eph receptor VAB-1 on the PLM growth cone is sufficient to cause PLM termination, but the identity and location of the activating ligand has not been established. In my thesis I investigated the ability of the ephrin ligand EFN-1 to activate VAB-1 to cause PLM termination when expressed on the same cell (in cis) and on opposing cells (in trans) to the receptor. I showed that EFN-1 is able to activate VAB-1 in cis and in trans to cause PLM termination. I also assessed the hypodermal seam cells as the source of the ephrin stop cue using fluorescently labelled and seam cell mutant transgenic worms. I found that although the PLM shows consistent termination on the seam cell V2 in wild type worms independent of PLM length, this process is not significantly disrupted in seam cell mutants. With this information I have created a new hypothesis that the PLM neurite is able the provide a positional cue for the developing seam cells, and have created a new transgenic strain which can be used to assess the impact of PLM and ALM cell ablation on seam cell position. My research is the first to demonstrate the ability of an ephrin ligand to activate its ephrin receptor in cis, and further research can investigate if this finding has in vivo applications.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Visualization and interpretation of geological observations into a cohesive geological model are essential to Earth sciences and related fields. Various emerging technologies offer approaches to multi-scale visualization of heterogeneous data, providing new opportunities that facilitate model development and interpretation processes. These include increased accessibility to 3D scanning technology, global connectivity, and Web-based interactive platforms. The geological sciences and geological engineering disciplines are adopting these technologies as volumes of data and physical samples greatly increase. However, a standardized and universally agreed upon workflow and approach have yet to properly be developed. In this thesis, the 3D scanning workflow is presented as a foundation for a virtual geological database. This database provides augmented levels of tangibility to students and researchers who have little to no access to locations that are remote or inaccessible. A Web-GIS platform was utilized jointly with customized widgets developed throughout the course of this research to aid in visualizing hand-sized/meso-scale geological samples within a geologic and geospatial context. This context is provided as a macro-scale GIS interface, where geophysical and geodetic images and data are visualized. Specifically, an interactive interface is developed that allows for simultaneous visualization to improve the understanding of geological trends and relationships. These developed tools will allow for rapid data access and global sharing, and will facilitate comprehension of geological models using multi-scale heterogeneous observations.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The subfornical organ (SFO) is a critical circumventricular organ involved in the control of cardiovascular and metabolic homeostasis. Despite the abundant literature clearly demonstrating the ability of SFO neurons to sense and respond to a plethora of circulating signals that influence various physiological systems, investigation of how simultaneously sensed signals interact and are integrated in the SFO is lacking. In this study, we use patch clamp techniques to investigate how the traditionally classified ‘cardiovascular’ hormone angiotensin II (ANG), ‘metabolic’ hormone cholecystokinin (CCK) and ‘metabolic’ signal glucose interact and are integrated in the SFO. Sequential bath-application of CCK (10nM) and ANG (10nM) onto dissociated SFO neurons revealed that: 63% of responsive SFO neurons depolarized to both CCK & ANG; 25% depolarized to ANG only; and 12% hyperpolarized to CCK only. We next investigated the effects of glucose by incubating and recording neurons in either hypo-, normo- or hyperglycemic conditions for a minimum of 24 hours and comparing the proportions of responses to ANG (n=55) or CCK (n=83) application in each condition. A hyperglycemic environment was associated with a larger proportion of depolarizing responses to ANG (X2, p<0.05), and a smaller proportion of depolarizing responses along with a larger proportion of hyperpolarizing responses to CCK (X2, p<0.01). These data demonstrate that SFO neurons excited by CCK are also excited by ANG, suggesting that CCK may influence fluid intake or blood pressure via the SFO, complementary to the well-understood actions of ANG at this site. Additionally, the demonstration that glucose environment affects the responsiveness of neurons to both these hormones highlights the ability of SFO neurons to integrate multiple metabolic and cardiovascular signals to affect transmission of information from the circulation to the brain, which has important implications for this structure’s critical role regulation of autonomic function.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Recreational fisheries in North America are valued between $47.3 billion and $56.8 billion. Fisheries managers must make strategic decisions based on sound science and knowledge of population ecology, to effectively conserve populations. Competitive fishing, in the form of tournaments, has become an important part of recreational fisheries, and is common on large waterbodies including the Great Lakes. Black Bass, Micropterus spp., are top predators and among the most sought after species in competitive catch-and-release tournaments. This study investigated catch-and-release tournaments as an assessment tool through mark-recapture for Largemouth Bass (>305mm) populations in the Tri Lakes, and Bay of Quinte, part of the eastern basin of Lake Ontario. The population in the Tri Lakes (1999-2002) was estimated to be stable between 21,928-29,780, and the population in the Bay of Quinte (2012-2015) was estimated to be between 31,825-54,029 fish. Survival in the Tri Lakes varied throughout the study period, from 31%-54%; while survival in the Bay of Quinte remained stable at 63%. Differences in survival may be due to differences in fishing pressure, as 34-46% of the Largemouth Bass population on the Tri Lakes is harvested annually and only 19% of catch was attributed to tournament angling. Many biological issues still surround catch-and-release tournaments, particularly concerning displacement from initial capture sites. In the past, the majority of studies have focused on small inland lakes and coastal areas, displacing bass relatively short distances. My study displaced Largemouth and Smallmouth Bass up to 100km, and found very low rates of return; only 1 of 18 Largemouth Bass returned 15 km and 1 of 18 Smallmouth Bass returned 135 km. Both species remained near the release sites for an average of approximately 2 weeks prior to dispersing. Tournament organizers should consider the use of satellite release locations to facilitate dispersal and prevent stockpiling at the release site. Catch-and-release tournaments proved to be a valuable tool in assessing population variables and the effects of long distance displacement through the use of mark recapture and acoustic telemetry on large lake systems.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Large calcareous eolianites cover the remote island of Bermuda, accounting for more than 90% of the limestone bedrock. This study examines the sedimentology and geochemistry of these eolianites to better understand Pleistocene oceanography and the meteoric alteration of subtropical carbonate sediments. Cluster analyses reveal that the eolian carbonate sediments fall into two natural groups that represent lagoonal and reefal end members of marine sediment production. Coral fragments are uncharacteristically absent, possibly destroyed prior to their incorporation into eolian deposits by endolithic microboring organisms or broken up during transport. Sediment assemblages lead to the following interpretations of the Bermudan offshore environment: (1) the Ledge Flats reef system along the southwestern coast has been active since MIS 11, contributing coralline algal-rich sediment to the northern beaches of Sandy’s Parish and acting as an energy barrier in the south, allowing for low energy sedimentation in the quiet back- reef region; (2) on the northeastern coast, the low energy back-reef region landward of the Ledge Flats has thrived since MIS 11; (3) during MIS 5e, slightly warmer water temperatures led to the hindrance of coralline algal growth along the southern coast and in the North Lagoon. These are the first interpretations of Pleistocene marine assemblages on Bermuda. Meteoric fluids progressively transformed the pristine carbonate sediments into hardened limestones in a predictable solubility-dependent manner. The progressive alteration is coincident with: (1) divergence of δ18O and δ13C values from those similar to unaltered sediment towards those of calcrete, due to interaction with CO2-charged meteoric fluids; (2) depletion of elements with low partitioning coefficients and low meteoric concentrations, such as barium, boron, magnesium, potassium, sodium, strontium, and uranium; (3) enrichment of iron from Terra Rossa-hosted iron oxides; (4) enrichment of aluminum via detrital minerals sourced from protosol horizons; and (5) manganese concentrations that remain uncharacteristically low, owing to the lack of a consistent manganese source. Elemental correlations are useful for characterizing meteoric diagenesis, assuming the primary mineralogy is recognized, all components have been fully altered, and inter-particle cements are ubiquitous.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The map representation of an environment should be selected based on its intended application. For example, a geometrically accurate map describing the Euclidean space of an environment is not necessarily the best choice if only a small subset its features are required. One possible subset is the orientations of the flat surfaces in the environment, represented by a special parameterization of normal vectors called axes. Devoid of positional information, the entries of an axis map form a non-injective relationship with the flat surfaces in the environment, which results in physically distinct flat surfaces being represented by a single axis. This drastically reduces the complexity of the map, but retains important information about the environment that can be used in meaningful applications in both two and three dimensions. This thesis presents axis mapping, which is an algorithm that accurately and automatically estimates an axis map of an environment based on sensor measurements collected by a mobile platform. Furthermore, two major applications of axis maps are developed and implemented. First, the LiDAR compass is a heading estimation algorithm that compares measurements of axes with an axis map of the environment. Pairing the LiDAR compass with simple translation measurements forms the basis for an accurate two-dimensional localization algorithm. It is shown that this algorithm eliminates the growth of heading error in both indoor and outdoor environments, resulting in accurate localization over long distances. Second, in the context of geotechnical engineering, a three-dimensional axis map is called a stereonet, which is used as a tool to examine the strength and stability of a rock face. Axis mapping provides a novel approach to create accurate stereonets safely, rapidly, and inexpensively compared to established methods. The non-injective property of axis maps is leveraged to probabilistically describe the relationships between non-sequential measurements of the rock face. The automatic estimation of stereonets was tested in three separate outdoor environments. It is shown that axis mapping can accurately estimate stereonets while improving safety, requiring significantly less time and effort, and lowering costs compared to traditional and current state-of-the-art approaches.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This dissertation offers a critical international political economy (IPE) analysis of the ways in which consumer information has been governed throughout the formal history of consumer finance (1840 – present). Drawing primarily on the United States, this project problematizes the notion of consumer financial big data as a ‘new era’ by tracing its roots historically from late nineteenth century through to the present. Using a qualitative case study approach, this project applies a unique theoretical framework to three instances of governance in consumer credit big data. Throughout, the historically specific means used to govern consumer credit data are rooted in dominant ideas, institutions and material factors.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This dissertation offers an investigation of the role of visual strategies, art, and representation in reconciling Indian Residential School history in Canada. This research builds upon theories of biopolitics, settler colonialism, and race to examine the project of redress and reconciliation as nation and identity building strategies engaged in the ongoing structural invasion of settler colonialism. It considers the key policy moments and expressions of the federal government—from RCAP to the IRSSA and subsequent apology—as well as the visual discourse of reconciliation as it works through archival photography, institutional branding, and commissioned works. These articulations are read alongside the creative and critical work of Indigenous artists and knowledge producers working within and outside of hegemonic structures on the topics of Indian Residential School history and redress. In particular the works of Jeff Thomas, Adrian Stimson, Krista Belle Stewart, Christi Belcourt, Luke Marston, Peter Morin, and Carey Newman are discussed in this dissertation. These works must be understood in relationship to the normative discourse of reconciliation as a legitimizing mechanism of settler colonial hegemony. Beyond the binary of cooptation and autonomous resistance, these works demonstrate the complexity of representing Indigeneity: as an ongoing site of settler colonial encounter and simultaneously the forum for the willful refusal of contingency or containment.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

With applications ranging from aerospace to biomedicine, additive manufacturing (AM) has been revolutionizing the manufacturing industry. The ability of additive techniques, such as selective laser melting (SLM), to create fully functional, geometrically complex, and unique parts out of high strength materials is of great interest. Unfortunately, despite numerous advantages afforded by this technology, its widespread adoption is hindered by a lack of on-line, real time feedback control and quality assurance techniques. In this thesis, inline coherent imaging (ICI), a broadband, spatially coherent imaging technique, is used to observe the SLM process in 15 - 45 $\mu m$ 316L stainless steel. Imaging of both single and multilayer builds is performed at a rate of 200 $kHz$, with a resolution of tens of microns, and a high dynamic range rendering it impervious to blinding from the process beam. This allows imaging before, during, and after laser processing to observe changes in the morphology and stability of the melt. Galvanometer-based scanning of the imaging beam relative to the process beam during the creation of single tracks is used to gain a unique perspective of the SLM process that has been so far unobservable by other monitoring techniques. Single track processing is also used to investigate the possibility of a preliminary feedback control parameter based on the process beam power, through imaging with both coaxial and 100 $\mu m$ offset alignment with respect to the process beam. The 100 $\mu m$ offset improved imaging by increasing the number of bright A-lines (i.e. with signal greater than the 10 $dB$ noise floor) by 300\%. The overlap between adjacent tracks in a single layer is imaged to detect characteristic fault signatures. Full multilayer builds are carried out and the resultant ICI images are used to detect defects in the finished part and improve upon the initial design of the build system. Damage to the recoater blade is assessed using powder layer scans acquired during a 3D build. The ability of ICI to monitor SLM processes at such high rates with high resolution offers extraordinary potential for future advances in on-line feedback control of additive manufacturing.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This dissertation examines the gentleman-scholar depicted at home in Dutch seventeenth-century genre paintings, focusing primarily on art created in the Northern Netherlands from the 1630s through the 1670s. The methodological approach is art historical but also pertains to history of architecture, history of dress, and gender studies. Employing the framework of the 'Ages of Man', this thesis investigates three related pictorial themes: the student, the scholar in his prime, and the aged scholar. Variations of male scholarly figures and the accoutrements of the study have a long history in Europe. Prototypical sources include religious history paintings of learned hermit-saints; artistic interest in the allegorical Saturnine persona; portraits of famous scholars; and the iconography of scholarly melancholy implied through vanitas allusions in portraiture and genre paintings. While the majority of Dutch genre paintings pertain to themes of women, male domestic routines form a small but important subset of this imagery and have not been studied. By the 1640s, this subject is readily identified by his setting, clothing, and actions. The ubiquity of scholarly attributes, such as books and globes, paired with the wearing of scholarly robes suggest the merits of intellectual curiosity and the privileges of studying as a pastime and designating a room as a study (studeerkamer). Distinct themes in genre also imply the challenges and rewards of scholarly activity pursued in concert with masculine civic and familial duty. Central to the development of this pictorial theme were: the innovative treatment of learned men by Rembrandt and his circle; the fijnschilder subjects of Dou; and the practice of amateur study by elite men, as suggested by the art of Vermeer. As this dissertation reveals, this convention did not grow to be consistent across the Northern Netherlands, nor was artistic interest limited to university towns. Rather, the larger relevance of scholars in Dutch society is evident in visual and literary sources. The domesticity of this figure in genre painting suggests that scholars mediated between an active and a contemplative life. Societal respect was garnered for scholars through their balance of familial and social duties with the honorable pastime of scholarly leisure.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged from the qualitative analysis were lack of opportunity, lack of assessment, and discomfort with creativity. It was concluded that a universal definition is required to establish clear and aligned understandings of engineering creativity. Instructors may want to consider demonstrating value by assessing creativity and establishing clear criteria in design projects. It is recommended that students be given more opportunities for practice through design activities and that they be introduced to design and creative thinking concepts early in their engineering education.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis engages black critical thought on the human and its contemporary iterations in posthumanism and transhumanism. It articulates five categories of analysis: displace, interrupt, disrupt, expand, and wither. Each is meant to allude to the generative potential in different iterations of black thought that engages the human. Working through Sylvia Wynter’s theories of the rise of Man-as-human in particular, the project highlights how black thought on the human displaces the uncritical whiteness of posthumanist thought. It argues that Afrofuturism has the potential to interrupt the linear progression from human to posthuman and that Octavia Butler’s Fledgling proffers a narrative of race as a technology that disrupts the presumed post-raciality of posthumanism and transhumanism. It then contends that Katherine McKittrick’s rearticulation of the Promise of Science can be extended to incorporate the promise of science fiction. In so doing, it avers that a more curated conversation between McKittrick and Wynter, one already ongoing, and Octavia Butler, through Mind of My Mind from her Patternist series, expands our notions of the human as a category even at the risk of seeing it wither as a politic or praxis. It ends on a speculative note meant to imagine the possibilities within the promise of science fiction.