The minimax distortion redundancy in empirical quantizer design

We obtain minimax lower and upper bounds for the expected distortionredundancy of empirically designed vector quantizers. We show that the meansquared distortion of a vector quantizer designed from $n$ i.i.d. datapoints using any design algorithm is at least $\Omega (n^{-1/2})$ awayfrom the optimal distortion for some distribution on a bounded subset of${\cal R}^d$. Together with existing upper bounds this result shows thatthe minimax distortion redundancy for empirical quantizer design, as afunction of the size of the training data, is asymptotically on the orderof $n^{1/2}$. We also derive a new upper bound for the performance of theempirically optimal quantizer.

The challenge of representative design in psychology and economics

The demands of representative design, as formulated by Egon Brunswik (1956), set a high methodological standard. Both experimental participants and the situations with which they are faced should be representative of the populations to which researchers claim to generalize results. Failure to observe the latter has led to notable experimental failures in psychology from which economics could learn. It also raises questions about the meaning of testing economic theories in abstract environments. Logically, abstract tests can only be generalized to abstract realities and these may or may not have anything to do with the empirical realities experienced by economic actors.

Planeamento de experiências : modelos e desafios dos planos em blocos incompletos.

O principal objetivo de um Planeamento de Experiências reside essencialmente na procura de relações entre variáveis e na comparação de níveis de fatores, recorrendo ao tratamento estatístico dos dados recolhidos. A utilização de blocos no Planeamento de Experiências é fundamental, pois permite reduzir ou eliminar a variabilidade introduzida por fatores que podem influenciar a experiência mas que não interessam e/ou não foram explicitamente incluídos durante o planeamento. Neste trabalho apresentamos os resultados do estudo e investigação dos Planos em Blocos Incompletos Equilibrados (BIBD), Planos em Blocos Incompletos Equilibrados com repetição de blocos (BIBDR) e Planos em Blocos Incompletos com blocos de diferentes dimensões (VBBD). Exploramos algumas propriedades e métodos de construção destes planos e ilustramos, sempre que possível, com exemplos. Tendo como base o planeamento em blocos, apresentamos uma aplicação dos BIBDR na área da Educação com o objetivo de comparar cinco domínios do pensamento algébrico de uma amostra de alunos do 1º ano do ensino superior em Cabo Verde. Para a análise dos dados da amostra foi utilizado o software R, versão 2.12.1. Pudemos constatar que existem diferenças significativas entre alguns dos domínios do pensamento algébrico, nomeadamente entre os domínios da Generalização da Aritmética e Tecnicismo Algébrico com os restantes domínios. Recomendamos a escolha de uma amostra mais representativa constituída por alunos de todas as instituições superiores de Cabo Verde

Expanding molecular modeling and design tools to non-natural sidechains.

Protein-protein interactions encode the wiring diagram of cellular signaling pathways and their deregulations underlie a variety of diseases, such as cancer. Inhibiting protein-protein interactions with peptide derivatives is a promising way to develop new biological and therapeutic tools. Here, we develop a general framework to computationally handle hundreds of non-natural amino acid sidechains and predict the effect of inserting them into peptides or proteins. We first generate all structural files (pdb and mol2), as well as parameters and topologies for standard molecular mechanics software (CHARMM and Gromacs). Accurate predictions of rotamer probabilities are provided using a novel combined knowledge and physics based strategy. Non-natural sidechains are useful to increase peptide ligand binding affinity. Our results obtained on non-natural mutants of a BCL9 peptide targeting beta-catenin show very good correlation between predicted and experimental binding free-energies, indicating that such predictions can be used to design new inhibitors. Data generated in this work, as well as PyMOL and UCSF Chimera plug-ins for user-friendly visualization of non-natural sidechains, are all available at http://www.swisssidechain.ch. Our results enable researchers to rapidly and efficiently work with hundreds of non-natural sidechains.

Genomewide association study using a high-density single nucleotide polymorphism array and case-control design identifies a novel essential hypertension susceptibility locus in the promoter region of endothelial NO synthase.

Essential hypertension is a multifactorial disorder and is the main risk factor for renal and cardiovascular complications. The research on the genetics of hypertension has been frustrated by the small predictive value of the discovered genetic variants. The HYPERGENES Project investigated associations between genetic variants and essential hypertension pursuing a 2-stage study by recruiting cases and controls from extensively characterized cohorts recruited over many years in different European regions. The discovery phase consisted of 1865 cases and 1750 controls genotyped with 1M Illumina array. Best hits were followed up in a validation panel of 1385 cases and 1246 controls that were genotyped with a custom array of 14 055 markers. We identified a new hypertension susceptibility locus (rs3918226) in the promoter region of the endothelial NO synthase gene (odds ratio: 1.54 [95% CI: 1.37-1.73]; combined P=2.58 · 10(-13)). A meta-analysis, using other in silico/de novo genotyping data for a total of 21 714 subjects, resulted in an overall odds ratio of 1.34 (95% CI: 1.25-1.44; P=1.032 · 10(-14)). The quantitative analysis on a population-based sample revealed an effect size of 1.91 (95% CI: 0.16-3.66) for systolic and 1.40 (95% CI: 0.25-2.55) for diastolic blood pressure. We identified in silico a potential binding site for ETS transcription factors directly next to rs3918226, suggesting a potential modulation of endothelial NO synthase expression. Biological evidence links endothelial NO synthase with hypertension, because it is a critical mediator of cardiovascular homeostasis and blood pressure control via vascular tone regulation. This finding supports the hypothesis that there may be a causal genetic variation at this locus.

iLOGP: A Simple, Robust, and Efficient Description of n-Octanol/Water Partition Coefficient for Drug Design Using the GB/SA Approach.

The n-octanol/water partition coefficient (log Po/w) is a key physicochemical parameter for drug discovery, design, and development. Here, we present a physics-based approach that shows a strong linear correlation between the computed solvation free energy in implicit solvents and the experimental log Po/w on a cleansed data set of more than 17,500 molecules. After internal validation by five-fold cross-validation and data randomization, the predictive power of the most interesting multiple linear model, based on two GB/SA parameters solely, was tested on two different external sets of molecules. On the Martel druglike test set, the predictive power of the best model (N = 706, r = 0.64, MAE = 1.18, and RMSE = 1.40) is similar to six well-established empirical methods. On the 17-drug test set, our model outperformed all compared empirical methodologies (N = 17, r = 0.94, MAE = 0.38, and RMSE = 0.52). The physical basis of our original GB/SA approach together with its predictive capacity, computational efficiency (1 to 2 s per molecule), and tridimensional molecular graphics capability lay the foundations for a promising predictor, the implicit log P method (iLOGP), to complement the portfolio of drug design tools developed and provided by the SIB Swiss Institute of Bioinformatics.

Design effect and interviewer effects: Evidence from the Spanish ESS3-2006 Data

In 2007 the first Quality Enhancement Meeting on sampling in the European SocialSurvey (ESS) took place. The discussion focused on design effects and inteviewereffects in face-to-face interviews. Following the recomendations of this meeting theSpanish ESS team studied the impact of interviewers as a new element in the designeffect in the response s variance using the information of the correspondent SampleDesign Data Files. Hierarchical multilevel and cross-classified multilevel analysis areconducted in order to estimate the amount of responses variation due to PSU and tointerviewers for different questions in the survey. Factor such as the age of theinterviewer, gender, workload, training and experience and respondent characteristicssuch as age, gender, renuance to participate and their possible interactions are alsoincluded in the analysis of some specific questions like trust in politicians and trustin legal system . Some recomendations related to future sampling designs and thecontents of the briefing sessions are derived from this initial research.

O Estereótipo na Publicidade em Cabo verde Estudo de Caso das Publicidades produzidas pela Design Comunicação e Imagem (DECO)

O presente trabalho monográfico intitulado “O estereótipo na publicidade em Cabo Verde – Estudo de Caso das Publicidades Produzida pela Design Comunicação e Imagem”, enquadra-se no âmbito do curso de licenciatura em Ciências da Comunicação, vertente Publicidade realizado pela universidade Jean Piaget de Cabo Verde. O presente trabalho visa apresentar as noções conceptuais do estereótipo e a sua dinâmica na publicidade e argumentar sobre alguns efeitos que este elemento pode promover no discurso publicitário. Assim, propôs-se como estudo de caso as publicidades criadas pela empresa DECO: O objectivo é, essencialmente, caracterizar a publicidade que se faz em Cabo Verde, verificando se os publicitários cabo-verdianos estão a explorar os recursos de que dispõem, designadamente os valores, os estilos de vida, estereótipos, etc., para chegar aos seus consumidores. Com a realização deste trabalho, chegou-se a conclusão que, o estereótipo faz parte da vida do homem para o bem ou para o mal. Sem a sua presença seria muito complicado perceber ou descodificar alguns fenómenos que acontecem na sociedade. O estereótipo ajuda na compreensão de informações que a primeira seria complexo de interpretar, tornando-a fácil.

Design of new promoters and of a dual-bioreporter based on cross-activation by the two regulatory proteins XylR and HbpR.

The HbpR protein is the sigma54-dependent transcription activator for 2-hydroxybiphenyl degradation in Pseudomonas azelaica. The ability of HbpR and XylR, which share 35% amino acid sequence identity, to cross-activate the PhbpC and Pu promoters was investigated by determining HbpR- or XylR-mediated luciferase expression and by DNA binding assays. XylR measurably activated the PhbpC promoter in the presence of the effector m-xylene, both in Escherichia coli and Pseudomonas putida. HbpR weakly stimulated the Pu promoter in E. coli but not in P. azelaica. Poor HbpR-dependent activation from Pu was caused by a weak binding to the operator region. To create promoters efficiently activated by both regulators, the HbpR binding sites on PhbpC were gradually changed into the XylR binding sites of Pu by site-directed mutagenesis. Inducible luciferase expression from mutated promoters was tested in E. coli on a two plasmid system, and from mono copy gene fusions in P. azelaica and P. putida. Some mutants were efficiently activated by both HbpR and XylR, showing that promoters can be created which are permissive for both regulators. Others achieved a higher XylR-dependent transcription than from Pu itself. Mutants were also obtained which displayed a tenfold lower uninduced expression level by HbpR than the wild-type PhbpC, while keeping the same maximal induction level. On the basis of these results, a dual-responsive bioreporter strain of P. azelaica was created, containing both XylR and HbpR, and activating luciferase expression from the same single promoter independently with m-xylene and 2-hydroxybiphenyl.

A double-quadrature radiofrequency coil design for proton-decoupled carbon-13 magnetic resonance spectroscopy in humans at 7T

Purpose Carbon-13 magnetic resonance spectroscopy (13C-MRS) is challenging because of the inherent low sensitivity of 13C detection and the need for radiofrequency transmission at the 1H frequency while receiving the 13C signal, the latter requiring electrical decoupling of the 13C and 1H radiofrequency channels. In this study, we added traps to the 13C coil to construct a quadrature-13C/quadrature-1H surface coil, with sufficient isolation between channels to allow simultaneous operation at both frequencies without compromise in coil performance. Methods Isolation between channels was evaluated on the bench by measuring all coupling parameters. The quadrature mode of the quadrature-13C coil was assessed using in vitro 23Na gradient echo images. The signal-to-noise ratio (SNR) was measured on the glycogen and glucose resonances by 13C-MRS in vitro, compared with that obtained with a linear-13C/quadrature-1H coil, and validated by 13C-MRS in vivo in the human calf at 7T. Results Isolation between channels was better than â^'30 dB. The 23Na gradient echo images indicate a region where the field is strongly circularly polarized. The quadrature coil provided an SNR enhancement over a linear coil of 1.4, in vitro and in vivo. Conclusion It is feasible to construct a double-quadrature 13C-1H surface coil for proton decoupled sensitivity enhanced 13C-NMR spectroscopy in humans at 7T. Magn Reson Med, 2014. © 2014 Wiley Periodicals, Inc.

Editor i disseny d'interiors

L’OpenGL és un motor 3D que s’utilitza com a lligam entre el software i el hardware gràfic. Actualment és una de les tecnologies més utilitzades en el disseny d’aplicacions 3D. El treball està realitzat amb el programa Visual C++, que és el més recomanat per al desenvolupament d’aplicacions OpenGL. L’objectiu principal d’aquest treball és aprendre a programar amb aquest tipus de tecnologia que no hem estudiat durant el període de carrera. Un altre objectiu del treball era trobar una funció útil i pràctica per a l’aplicació i ens vam decantar per a realitzar un editor d’habitacions per un botiga o empresa de mobles. L’usuari pot de forma molt ràpida i senzilla dibuixar com és l’habitació que vol decorar de forma totalment personalitzada. El programa li generarà l’habitació en tres dimensions i amb els materials que s’han escollit (terra, parets, portes…). Després pot editar-hi mobles personalitzats o pertanyents a la llibreria del programa. El programa incorpora també una base de dades per a l’empresa que ens portarà la gestió de clients, habitacions, textures i mobles (permet ampliar la llibreria del programa). Un cop acabada l’habitació el programa ens hi permet fer una visita de forma interactiva i generar-ne la factura entre altres funcions. La conclusió principal després d’haver acabat aquest projecte, és que a part d’haver après OpenGL, hem aconseguit realitzar una aplicació molt pràctica de cares al disseny d’interiorisme.

Disseny i muntatge d'un mòdul d'entrades digitals per comunicació modbus

Actualment l’exigència i la competitivitat del mercat, obliguen les industries a modernitzar-se i automatitzar tots els seus processos productius. En aquests processos les dades i paràmetres de control són dades fonamentals a verificar. Amb aquest treball final de carrera, es pretén realitzar un mòdul d’entrades digitals, per tal de gestionar les dades rebudes d’un procés automatitzat. L’objectiu d’aquest TFC ha estat dissenyar un mòdul d’entrades digitals capaç de gestionar dades de qualsevol tipus de procés automatitzat i transmetre-les a un mestremitjançant un bus de comunicació Modbus. El projecte però, s’ha centrat en el cas específic d’un procés automatitzat per al tractament de la fusta. El desenvolupament d’aquest sistema, comprèn el disseny del circuit, la realització de la placa, el software de lectura de dades i la implementació del protocol Modbus. Tot el mòdul d’entrades està controlat per un microcontrolador PIC 18F4520. El disseny és un sistema multiplataforma per tal d’adaptar-se a qualsevol procés automàtic i algunes de les seves característiques més rellevants són: entrades aïllades multitensió, control de fugues, sortides a relé, i memòria externa de dades, entre altres. Com a conclusions cal dir que s’han assolit els objectius proposats amb èxit. S’ha aconseguit un disseny robust, fiable, polivalent i altament competitiu en el mercat. A nivell acadèmic, s’han ampliat els coneixements en el camp del disseny i de la programació.

Traducción técnica del capítulo III del libro Advanced Data Warehouse design: from conventional to spatial and temporal applications

The proposal to work on this final project came after several discussions held with Dr. Elzbieta Malinowski Gadja, who in 2008 published the book entitled Advanced Data Warehouse Design: From Conventional to Spatial and Temporal Applications (Data-Centric Systems and Applications). The project was carried out under the technical supervision of Dr. Malinowski and the direct beneficiary was the University of Costa Rica (UCR) where Dr. Malinowski is a professor at the Department of Computer Science and Informatics. The purpose of this project was twofold: First, to translate chapter III of said book with the intention of generating educational material for the use of the UCR and, second, to venture in the field of technical translation related to data warehouse. For the first component, the goal was to generate a final product that would eventually serve as an educational tool for the post-graduate courses of the UCR. For the second component, this project allowed me to acquire new skills and put into practice techniques that have helped me not only to perfom better in my current job as an Assistant Translator of the Inter-American BAnk (IDB), but also to use them in similar projects. The process was lenggthy and required torough research and constant communication with the author. The investigation focused on the search of terms and definitions to prepare the glossary, which was the basis to start the translation project. The translation process itself was carried out by phases, so that comments and corrections by the author could be taken into account in subsequent stages. Later, based on the glossary and the translated text, illustrations had been created in the Visio software were translated. In addition to the technical revision by the author, professor Carme Mangiron was in charge of revising the non-technical text. The result was a high-quality document that is currently used as reference and study material by the Department of Computer Science and Informatics of Costa Rica.