Índice de floculação e agregação de um latossolo vermelho sob dois sistemas de colheita da cana-de-açúcar

The objective of this work was to evaluate the soil physics and chemical attributes of Rhodic Ferralsol, in sugarcane systems harvest compared with soil forest. The treatments were consisted by native forest, manual and mechanized sugarcane harvesting. The soil was sampled at 0-0.10; 0.10-0.20 and 0.20-0.30 m soil depths. The soil organic matter, pH and PCZ values, flocculation degree and soil aggregation were evaluated in each soil sample. The statistics analysis was carried in a split-plot completely randomized design with five replications, exception for the soil aggregation,, with six replications The soil under MN, the soil organic matter and aggregates percentage (7.93 mm class) were higher. The higher mean weigh diameter aggregates was observed at 0-0.20 soil depth, in MN.

Fertilização nitrogenada, densidade de plantas e rendimento de milho cultivado no sistema plantio direto

In maize (Zea mays L.), the inadequate nitrogen supply and planting density are considered limiting factors to the grain yield. The objective of this study was to evaluate the influence of different nitrogen levels and plant densities to the maize yield components and productivity. The experiment was carried out in the Cerrado region, located in the southern of the Maranhao State, Brazil, in a clay Oxisol (Ustox), cropped under the no-tillage system for six years. The randomized completed blocks experimental design with four replications was used, with treatments arrangement in a 5 x 4 factorial. The treatments were a combination of five doses of nitrogen as urea (0, 50, 100, 150 and 200 kg ha(-1)) and four plant densities (25,000; 50,000; 75,000 and 100,000 plants he). The grain number and mass per spike and grain mass per plant were improved by increased N and decreased plant density. Higher incomes of grains were obtained with adding concomitantly in N doses and in plants density. The maximum grain yield (11,9 Mg ha(-1)) was obtained with 120 kg ha(-1) of N and 83,000 plants ha(-1).

Tolerance to iron chlorosis in non-grafted quince seedlings and in pear grafted onto quince plants

Grafting is a technique that may affect plant tolerance to iron chlorosis in plants cultivated for their fruit. Therefore, the objective of this study was to evaluate the tolerance of non-grafted quince seedlings and pear grafted onto quince plants cultivated in pots with alkaline soil. The experiment was conducted in a greenhouse at the University of Cordoba, Spain, in pots (3 L) filled with alkaline soil, with one plant per pot. The treatments consisted of two genotypes, quince (Cydonia oblonga Mill) semi-woody rooted cuttings, cultivar BA29, and pear (Pyrus Communis L.), cultivar Ercolini, grafted onto quince cultivar BA29 (rootstock), and two nutrient solutions with and without iron (80 mu M Fe-EDDHA) arranged in a completely random design with eight repetitions. Each pot received 250 mL of the nutrient solution on June 3rd, 2010. Chlorophyll indirect measurements and the main stem length were evaluated for six weeks after the commencement of the treatments. During the last week, the main stem dry matter weight and the leaf total iron content were determined. It was found that grafting pear seedlings onto quince rootstock resulted in a higher tolerance to iron deficiency than when quince was not grafted. Non-grafted quince plants without iron in the nutrient solution, compared to the results with its application, showed low SPAD (Soil-Plant Analyses Development) values and resulted in plants with a lower leaf iron content and lower dry matter production; however, decreased seedling stem growth was observed only in the last week of cultivation.

Omissão de macronutrientes no crescimento e no estado nutricional de plantas de repolho cultivado em solução nutritiva

Given the importance of heart, especially among the high brassica consumption, coupled with the scarcity of studies that report symptoms of nutritional disorders in the culture, the work was carried out to evaluate the effect of the omission of macronutrients in the development and nutritional status of cabbage, and describe visual symptoms of nutritional deficiency. The experiment was conducted under greenhouse conditions in the UNESP, Jaboticabal, SP. The experiment was arranged in completely randomized design with three replications and seven treatments, corresponding to complete nutritive solution (macro and micronutrients) and individual N, P, K, Ca, Mg and S omission. Plant height, number of leaves, leaf area, shoot, root and whole plant dry mass and macronutrient levels were determined and nutritional deficiency symptoms were described. Individual omissions of N, P, K or Ca were limiting for cabbage growth, considerably reducing plant height, number of leaves, and shoot, root and whole plant dry mass. Nutritional deficiency symptoms were observed for each element. Shoot macronutrient levels in control and nutrient omission treatments were, respectively: N = 31.0-11.9; P = 5.3-0.60; K = 63.5-4.8; Ca = 25.9-4.8; Mg = 5.2-0.5; S = 10.3-1.4 g kg(-1).

Modos de aplicação de zinco na nutrição e no crescimento inicial da cultura do arroz

The present research had he objective to evaluate rice response to zinc application forms on the nutrition, growth and dry matter production, in vase conditions. The experiment was carried out in a completely randomized design, with five treatments (leaf Zn, incorporated Zn, located Zn, Zn saw seed and witness - whitout zinc), in four repetitions during two cycles of cultivation with 42 days of duration each. Plastic vase of 7L, were filled with Red Distrofic Latosol (Zn = 0.3 mg dm(-3) in DTPA). The application of Zn saw soil in both culture of the rice improved its level in the soil, being distinguished it from located form. In the first cycle, the application of Zn saw leaf promoted greater absorption of the nutrient for the rice plants, while in the second cycle leaf application was followed by the saw soil incorporated. The biggest dry matter production occurred with application of leaf saw in the first cycle and saw soil (incorporated and located) in the second rice cultivation.

Modos de aplicação de zinco na nutrição e na produção de matéria seca do milho BRS 1001

The culture of the maize is responsive the fertilization with zinc, however, its efficiency can be affected by the method of aplication. Thus, this work had as objective to evaluate the effect of the methods of zinc application in the nutritional state and the initial growth of the culture of the maize. The experiment was in a completely randomized design, with five treatments in four repetitions. The experimental unit was composed for a pot (7 L) filled with a distrofic Red Latosol, clayey texture, with four plants of maize. The treatments had been constituted by four ways of zinc application: in the soil incorporated (3 mg Zn dm(-3)), and located (1 mg Zn dm(-3)); foliar (solution of 23 mg Zn L(-1)); e in seed (40 g Zn kg(-1) of seed) and beyond the witness (control). The treatments had been applied during two cultivation of 42 days, except the Zn incorporated in the soil. In the end of each culture, the cut of the plants for the evaluation of the growth variable (leaf height, number, the diameter of stems and dry matter) and the determination of the zinc text was carried through in the soil and the aerial part. The zinc application promoted increment in the height and the production of matter of the maize. The zinc application soil (incorporated and located), foliar and seed had been similar in the initial development of the culture, however, the foliar way promoted greater absorption of the nutrient for the plant.

Modos de aplicação de zinco na nutricão e na produção de massa seca de plantas de trigo

Zinc application methods can affect the nutrition and the initial development of the wheat. Thus, the aim of this work was to analyze the different ways of Zn application in the soil, on nutrition and on dry matter production. A completely randomized experimental design with four replications was used. The experiment was composed by the following Zn application treatments: control (no zinc application); soil incorporation, furrow located, seeds treatment and leaf pulverization. The experimental unit was composed of a pot filled with 7 L of soil. Morphological traits for each plant were determined on 52 days after emergence by the evaluations of plant height, internodes number, tillers number and aerial part dry matter. Still, the soil and plant chemical analysis was accomplished. The furrow located method provided larger concentrations of the micronutrient available. The zinc application methods did not influence the initial growth of the wheat plants. The zinc concentration in leaves was influenced by the different application methods, being the leaf pulverization the one that was caused the largest zinc accumulation on aerial part dry matter.

Resposta de mudas de goiabeira a aplicação de fósforo

Phosphorus is a nutrient that most limits plant growth because of its importance in nutrition and low concentration in tropical soils. The present study aimed to evaluate the response of guava to application of phosphorus. For this, the experiment was conducted in a greenhouse at UNESP, Jaboticabal Campus, with guava plants (cv. Paluma) from herbaceous plants cultivated in plastic bags (2.8 dm(-3)), filled with Alfissol (P = 2 mg dm(-3)), between November 2007 and April 2008. The treatments consisted of five doses of phosphorus (0, 100, 200, 300 and 400 mg dm(-3)) in the form of triple superphosphate (44% P(2)O(5)), arranged in a randomized block design with four replications. After 100 days of transplantation evaluated the phosphorus content in soil, dry weight of shoot and root phosphorus and zinc in the shoot. The highest production of dry weight guava was a dose of 257 g dm(-3) of phosphorus and was associated with P content in soil and leaf 110 mg dm(-3) and 2,3 g kg(-1).

Cultivares de mamoneira e adubação nitrogenada na formação de mudas

Objetivou-se com este trabalho avaliar a influência de nitrogênio no desenvolvimento de mudas de cultivares de mamona. O experimento foi conduzido em casa-de-vegetação, no Setor de Cafeicultura do Departamento de Agricultura da UFLA, Lavras, Estado de Minas Gerais, utilizando-se quatro doses de nitrogênio N (0, 150, 300 e 450 mg kg-1 de substrato) em três cultivares de mamona (AL-Guarani, Nordestina e Mirante-10). O delineamento experimental foi o de blocos casualizados com três repetições e duas plantas por parcela. Foram avaliados parâmetros referentes ao crescimento das mudas. de acordo com os resultados obtidos, a aplicação de nitrogênio prejudicou o crescimento das mudas em todas as cultivares avaliadas. A cultivar Mirante-10 destacou-se das demais.

Produção de matéria seca e absorção de nutrientes pelo milho em razão da saturação por bases e da adubação potássica

O trabalho foi conduzido em condições de casa de vegetação, com o objetivo de avaliar a resposta do milho à adubação potássica e à saturação do solo por bases, na produção de matéria seca e na absorção de nutrientes. O delineamento experimental foi inteiramente casualizado, com quatro repetições, em esquema fatorial 3x2x4, constituindo-se de três solos (Areia Quartzosa, Latossolo Vermelho-Escuro e Latossolo Roxo), dois valores de saturação por bases (40% e 70 %) e quatro teores de K no solo (0,5, 1,5, 3,0 e 6,0 mmol c dm-3). Para a calagem, foi utilizada mistura de carbonato de cálcio + carbonato de magnésio (PRNT = 103,3 %) na proporção de 4:1. A adubação básica constou de 200 mg kg-1 de N, 200 mg kg-1 de P e 5 mg kg-1 de Zn por vaso de 30 L, sendo o N parcelado em 2,48 g (83,7 mg kg-1) na semeadura e o restante em duas coberturas aos 25 e 40 dias após a emergência das plântulas (DAE). As doses de K utilizadas foram de 0, 3,62, 7,24 e 14,48 g de KCl por vaso. A semeadura foi realizada em 4/3/97, utilizando-se o milho cv. Zêneca 8392, mantendo-se uma planta/vaso durante 60 DAE. O K proporciona ganhos de matéria seca até teores de 1,5 mmol c dm-3 no solo. O aumento dos teores de K no solo resultam em queda na concentração de Ca e Mg na matéria seca do milho. A elevação da saturação por bases e respectivo aumento dos teores de Ca e Mg no solo reduzem a absorção de K pelo milho.

Modelos para análise e dimensionamento de painéis de alvenaria estrutural

The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement

Compactação do solo e produção de cultivares de milho em latossolo vermelho: I - características de planta, solo e índice S

Este trabalho teve como objetivo avaliar, em condições de campo, a resposta de duas cultivares de milho com características genéticas distintas em Latossolo Vermelho em seis níveis de compactação. O experimento foi conduzido em faixas, no delineamento de blocos completos casualizados, com quatro repetições. Utilizaram-se os híbridos de milho DKB 390 e DAS 2B710. Após a semeadura do milho, coletaram-se amostras indeformadas de solo nas profundidades de 0-10, 10-20 e 20-30 cm, para determinação de propriedades físicas do solo e índice S. No estádio de maturidade fisiológica dos grãos do milho, foram determinados: a altura das plantas, a altura de inserção da primeira espiga, o diâmetro do segundo colmo acima do solo e a massa de matéria seca das plantas. As espigas foram colhidas e debulhadas para determinação da produtividade de grãos, corrigida para a umidade-padrão de 13 %, calculando-se também o número de espigas por planta e o índice de colheita. O índice S apresentou correlação positiva com a produtividade, porém, abaixo do limite de S < 0,035, estabelecido para uma condição de solo desestruturado, ocorreram perdas acentuadas na produtividade de milho. Os híbridos simples de milho DKB 390 e DAS 2B710 não apresentaram diferenças quando submetidos aos diferentes níveis de compactação. A produtividade dos híbridos de milho foi significativamente menor quando a resistência do solo à penetração atingiu 2,15 MPa.

Comportamento de atributos físicos de um Latossolo Amarelo sob agroecossistemas do Amazonas

O desmatamento da floresta tropical da Amazônia e a utilização do solo para fins agrícolas potencializam sua degradação física, química e biológica, quando realizados de forma inadequada. Este estudo teve o objetivo de avaliar o efeito de sistemas de uso e manejo de um Latossolo Amarelo, muito argiloso, mediante avaliações de atributos físicos determinados nas profundidades de 0,0-0,2 e 0,2-0,4 m, em área da Universidade do Amazonas, Manaus (AM). Os sistemas de uso e manejo foram: milho, laranja, pupunha, guaraná, pastagem, capoeira e floresta. Nos sistemas com milho, laranja, pupunha e pastagem, foram realizados o desmatamento, a queima e as operações de preparo e cultivo mecanizados. Foram avaliados a composição granulométrica, o grau de floculação da argila, o teor de matéria orgânica, a densidade de partículas, a densidade do solo, a porosidade total, a macro e microporosidade, e a infiltrações inicial e básica. Utilizou-se o delineamento experimental inteiramente casualizado, com três repetições. Os agroecossistemas, em ordem crescente: capoeira, guaraná, milho, laranja, pupunha e pastagem induziram uma degradação dos atributos físicos do solo cultivado em relação ao de floresta, quantificada pelos maiores valores de densidade do solo e menores de macroporosidade, infiltração de água e matéria orgânica.

Impacto do tráfego de máquinas na qualidade física do solo e produtividade de milho em Argissolo

Este estudo teve o objetivo de avaliar o impacto do tráfego de máquinas na qualidade física do solo e produtividade de milho em Argissolo. O delineamento experimental foi inteiramente casualizado, com seis tratamentos e oito repetições representadas por parcelas de 14 m². Os tratamentos foram: T0) sem tráfego; T1*) uma passada de trator de 3,0 t, uma ao lado da outra; T1) uma passada; T2) duas passadas; T4) quatro passadas; T8) oito passadas de um trator de 8,0 t. Utilizou-se o milho (Zea mays L.) híbrido master, que foi avaliado quanto à produtividade de grãos. No solo, foram avaliados a porosidade, a densidade do solo, a resistência à penetração, o intervalo hídrico ótimo e a densidade do solo relativa. O tráfego de máquinas compactou o solo até 0,25 m de profundidade e reduziu a produtividade de milho em até 22%. O intervalo hídrico ótimo diminuiu com o aumento do tráfego de máquinas indicando decréscimo da qualidade física do solo para o milho. A densidade do solo relativa limitante à produtividade de milho é de 0,89.

Potássio no desenvolvimento inicial da soqueira de cana crua

Na colheita mecanizada sem o uso de fogo ocorre deposição de palhada na superfície do solo, a qual pode ser reciclada e reduzir a adubação potássica para a cana-de-açúcar, em relação à cana queimada, o que pode refletir em menor custo de produção. Objetivou-se avaliar o efeito da aplicação de potássio no desenvolvimento inicial da soqueira de primeiro corte da cana-de-açúcar (variedade SP 89-1115), em sistema de colheita sem despalha a fogo. O experimento foi instalado em uma área de primeira soqueira de cana-de-açúcar, cultivada em Latossolo Vermelho, textura argilosa. Os tratamentos foram constituídos por cinco doses de K2O (0 kg ha-1; 32,5 kg ha-1; 65,0 kg ha-1; 130,0 kg ha-1; e 195,0 kg ha-1), na forma de KCl, aplicado em 2009, dispostos em blocos casualizados e com cinco repetições. As variáveis de crescimento avaliadas foram: número de perfilhos, altura de planta e diâmetro de colmo, aos 120 dias após o brotamento. A aplicação de potássio proporcionou incremento com ajuste linear do teor de potássio no solo, nas camadas 0-0,20 m e 0,20-0,40 m de profundidade, atingindo 0,18 cmol c dm-3 e 0,12 cmol c dm-3, respectivamente, para a maior dose de K. A aplicação de K não afetou o número de perfilhos e diâmetro de colmo, mas influenciou a altura, atingindo maior valor na dose de 195,0 kg ha-1 de K2O.