912 resultados para DIAMOND


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nas últimas décadas, os sensores de Bragg têm sido frequentemente utilizados em inúmeras aplicações, em resultado das características únicas desta tecnologia. Contudo, a comunidade científica tem feito um esforço contínuo em desenvolver sensores que respondam tanto quanto possível aos requisitos e interesses de cada aplicação em particular. As bioaplicações são um campo de crescente interesse pelos sensores de Bragg, atendendo à heterogeneidade e complexidade dos meios de análise em questão. No âmbito desta dissertação foi realizada uma análise teórica dos princípios de funcionamento das redes de Bragg, focada em redes uniformes e inclinadas. Foi também descrito o processo de produção de redes de Bragg regeneradas. Redes de Bragg uniformes foram aplicadas na caracterização da reacção de polimerização e cura de materiais dentários, nomeadamente resina para base de dentadura, cimentos e gessos. Foi feita uma análise comparativa do desempenho de diferentes tipos de cimentos e gessos. Em relação ao gesso foi ainda avaliada a influência do rácio água/pó nas propriedades do material. Devido à importância que o índice de refracção tem na detecção de substâncias, doenças e controlo de qualidade de produtos, foi desenvolvido um sensor de índice de refracção baseado numa rede de Bragg inclinada. Implementaram-se também sensores para medição simultânea de índice de refracção e deformação, índice de refracção e temperatura e índice de refracção, deformação e temperatura, todos baseados numa única rede inclinada. O último dispositivo foi validado em ambiente laboratorial. Com o propósito de desenvolver um sensor baseado em redes de Bragg para monitorização da deformação óssea, foi avaliada a biocompatibilidade da fibra óptica em cultura de células osteoblásticas, e analisada a integridade física e funcionalidade da rede de Bragg nesse meio. O interesse em aumentar a sensibilidade e alargar a gama de trabalho dos sensores conduziu ao revestimento das fibras ópticas. Atendendo ao potencial índole biológica e biomédica do trabalho, usou-se como material de recobrimento o diamante, dada a excelente resposta em termos de biocompatibilidade, resistência à corrosão, não toxicidade e afinidade para espécies químicas e biológicas. Os filmes foram obtidos por deposição química a partir da fase vapor assistida por filamento quente. Para além de amostras de fibra óptica, foram revestidas redes de Bragg uniformes e regeneradas. Os sensores revestidos com diamante foram caracterizados à deformação e à temperatura.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Generalizamos o cálculo Hahn variacional para problemas do cálculo das variações que envolvem derivadas de ordem superior. Estudamos o cálculo quântico simétrico, nomeadamente o cálculo quântico alpha,beta-simétrico, q-simétrico e Hahn-simétrico. Introduzimos o cálculo quântico simétrico variacional e deduzimos equações do tipo Euler-Lagrange para o cálculo q-simétrico e Hahn simétrico. Definimos a derivada simétrica em escalas temporais e deduzimos algumas das suas propriedades. Finalmente, introduzimos e estudamos o integral diamond que generaliza o integral diamond-alpha das escalas temporais.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Shared decision-making (SDM) is a high priority in healthcare policy and is complementary to the recovery philosophy in mental health care. This agenda has been operationalised within the Values-Based Practice (VBP) framework, which offers a theoretical and practical model to promote democratic interprofessional approaches to decision-making. However, these are limited by a lack of recognition of the implications of power implicit within the mental health system. This study considers issues of power within the context of decision-making and examines to what extent decisions about patients? care on acute in-patient wards are perceived to be shared. Focus groups were conducted with 46 mental health professionals, service users, and carers. The data were analysed using the framework of critical narrative analysis (CNA). The findings of the study suggested each group constructed different identity positions, which placed them as inside or outside of the decision-making process. This reflected their view of themselves as best placed to influence a decision on behalf of the service user. In conclusion, the discourse of VBP and SDM needs to take account of how differentials of power and the positioning of speakers affect the context in which decisions take place.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Tese de dout., Ciências e Tecnologias das Pescas, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2003

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Micro-abrasion wear tests with ball-cratering configuration are widely used. Sources of variability are already studied by different authors and conditions for testing are parameterized by BS EN 1071-6: 2007 standard which refers silicon carbide as abrasive. However, the use of other abrasives is possible and allowed. In this work, ball-cratering wear tests were performed using four different abrasive particles of three dissimilar materials: diamond, alumina and silicon carbide. Tests were carried out under the same conditions on a steel plate provided with TiB2 hard coating. For each abrasive, five different test durations were used allowing understanding the initial wear phenomena. Composition and shape of abrasive particles were investigated by SEM and EDS. Scar areas were observed by optical and electronic microscopy in order to understand the wear effects caused by each of them. Scar geometry and grooves were analyzed and compared. Wear coefficient was calculated for each situation. It was observed that diamond particles produce well-defined and circular wear scars. Different silicon carbide particles presented dissimilar results as consequence of distinct particle shape and size distribution.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Clinical history - A 4-year-old boy, born prematurely at 29 weeks (twin pregnancy), with periventricular leukomalacia and epilepsy underwent brain MRI. Neurological examination showed severe developmental retardation with axial hypotonia, spastic tetraparesis and convergent strabismus. Imaging findings - Cranial MRI revealed typical aspects of partial rhombencephalosynapsis with vermian hypoplasia, midline fusion of the cerebellar hemispheres and transversely oriented folia and fissures. There was also mild dilatation and dysmorphism of the ventricular system, the septum pellucidum was absent, the hippocampi were malrotated and had vertical orientation and additional finding of associated periventricular cystic leukomalacia. Discussion - Rhombencephalosynapsis (RS) is a rare congenital defect of the cerebellum classically characterised by vermian agenesis or hypogenesis, fusion of the hemispheres, and closely apposed or fused dentate nuclei. It is now considered to result from an absence of division of the cerebellar hemispheres, following an insult between the 28th and 44th day of gestation (i.e., before the formation of the vermis). Other features have also been described such as fusion of the thalami and cerebral peduncles, malrotated hippocampi, corpus callosum agenesis, hypoplastic chiasm, absence of the septum pellucidum, ventriculomegaly, agenesis of the posterior lobe of the pituitary and cortical malformations. Musculoskeletal, cardiovascular, urinary tract, and respiratory abnormalities have been reported. Typical symptoms consist of swallowing difficulties, delayed motor acquisitions, muscular hypotonia, spastic quadriparesis, cerebellar signs including dysarthria, gait ataxia, abnormal eye movements, and seizures and hydrocephalus. The major MRI signs consist of fused cerebellar hemispheres, with absent or hypoplastic vermis, narrow diamond-shaped fourth ventricle and fused dentate nuclei. In a minority of cases, partial RS has been identified by MRI, demonstrating the presence of the nodulus and the anterior vermis and absence of part of the posterior vermis with only partial fusion of the hemispheres in the inferior part. Other cerebellar malformations involving vermian agenesis or hypoplasia include the Dandy–Walker continuum, Joubert syndrome, tectocerebellar dysraphy or pontocerebellar hypoplasias, and are now easily distinguished from RS by both brain MRI and morphology.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

One of the so called diamond shaped modules of the Mackenzie Chown Complex.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The purpose of this study was to determine the effect of increased soil moisture levels on the decomposition processes in a peat-extracted bog. Field experiments, in which soil moisture levels were manipulated, were conducted using 320 microcosms in the Wainfleet Bog from May 2002 to November 2004. Decomposition was measured using litter bags and monitoring the abundance of macro invertebrate decomposers known as Collembola. Litter bags containing wooden toothpicks (n=2240), filter paper (n=480) and Betula pendula leaves (n=40) were buried in the soil and removed at regular time intervals up to one year. The results of the litter bag studies demonstrated a significant reduction of the decomposition of toothpicks (p<0.001), filter paper (p<0.001), and Betula pendula leaves (p

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Martin “Bud” Walsh served in the Canadian Merchant Navy during the Second World War as a fireman stoking boilers. He continued to serve in the Navy after the war, until December 1948. In 1949, he joined the Crowland Police Department as a constable. He subsequently worked as a constable with the Welland Police Department and was promoted several times, eventually to deputy chief in 1969. In 1971, he became superintendent of the St. Catharines detachment of the regional force. He has been the recipient of several prestigious awards honouring his contributions to his country, including the Queen Elizabeth II Silver Jubilee Medal (1977) and the Queen Elizabeth II Diamond Jubilee Medal (2012).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A sorority pin of Margaret Julia Woodruff (Band). It is diamond shaped and it has a pearl like border around the outside.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Receipt from J.B. Fowler, Diamonds, Watches and Jewelry of St. Catharines for balance paid, n.d.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Receipt from J.B. Fowler for clocks, March 5, 1887.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Thorold Post, Thorold, Ontario. This is a supplement to the paper commemorating the Canada’s Diamond Jubilee 1867-1927. The front page of the supplement is coloured, June 30, 1927.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thèse réalisée en cotutelle avec l'Université Catholique de Louvain (Belgique)