Room-temperature single-electron junction.

The design, realization, and test performances of an electronic junction based on single-electron phenomena that works in the air at room temperature are hereby reported. The element consists of an electrochemically etched sharp tungsten stylus over whose tip a nanometer-size crystal was synthesized. Langmuir-Blodgett films of cadmium arachidate were transferred onto the stylus and exposed to a H2S atmosphere to yield CdS nanocrystals (30-50 angstrom in diameter) imbedded into an organic matrix. The stylus, biased with respect to a flat electrode, was brought to the tunnel distance from the film and a constant gap value was maintained by a piezo-electric actuator driven by a feedback circuit fed by the tunneling current. With this set-up, it is possible to measure the behavior of the current flowing through the quantum dot when a bias voltage is applied. Voltage-current characteristics measured in the system displayed single-electron trends such as a Coulomb blockade and Coulomb staircase and revealed capacitance values as small as 10(-19) F.

Protonation dynamics of the extracellular and cytoplasmic surface of bacteriorhodopsin in the purple membrane.

The dynamics of proton binding to the extracellular and the cytoplasmic surfaces of the purple membrane were measured by laser-induced proton pulses. Purple membranes, selectively labeled by fluorescein at Lys-129 of bacteriorhodopsin, were pulsed by protons released in the aqueous bulk from excited pyranine (8-hydroxy-1,3,6-pyrenetrisulfonate) and the reaction of protons with the indicators was measured. Kinetic analysis of the data imply that the two faces of the membrane differ in their buffer capacities and in their rates of interaction with bulk protons. The extracellular surface of the purple membrane contains one anionic proton binding site per protein molecule with pK = 5.1. This site is within a Coulomb cage radius (approximately 15 A) from Lys-129. The cytoplasmic surface of the purple membrane bears 4-5 protonable moieties (pK = 5.1) that, due to close proximity, function as a common proton binding site. The reaction of the proton with this cluster is at a very fast rate (3.10(10) M-1.s-1). The proximity between the elements is sufficiently high that even in 100 mM NaCl they still function as a cluster. Extraction of the chromophore retinal from the protein has a marked effect on the carboxylates of the cytoplasmic surface, and two to three of them assume positions that almost bar their reaction with bulk protons. The protonation dynamics determined at the surface of the purple membrane is of relevance both for the vectorial proton transport mechanism of bacteriorhodopsin and for energy coupling, not only in halobacteria, but also in complex chemiosmotic systems such as mitochondrial and thylakoid membranes.

Eits: Combinatorics, Potential and Genre

Eits is a work of fiction, a non-traditional novel whose structure is largely determined by an Oulipian-style constraint. The constraint in Eits is culled from the album names and song titles of the band Explosions in the Sky. Each album corresponds to a chapter in the novel, and the language of each album title must be used in some way as an introduction to each chapter. Within each chapter (album), song titles correspond to numbered sections where each title must appear as is in the first sentence of that section. This not only dictates, to some degree, the direction of the text that will follow, but, looking ahead, the title of the next section will dictate where this section must arrive. From this, a narrative naturally takes shape. Albums/chapters appear chronologically, according to each album's release date, and within each album/chapter, songs/sections appear in the order they do on the album. This is, perhaps, the most straightforward way of ordering the received language of the constraint, the possibilities beyond this exponential. Eits is a novel that shifts in form, providing a texture to the space and reading experience of the novel, all in hopes of creating a space in which content and form inform and push each other to new limits. Eits is never satisfied to settle on one form for too long, and it is in the movement between forms that the narrative develops in interesting ways. Eits demonstrates the combinatoric possibilities inherent in language, and this exploration of potential highlights the reciprocal relationship between writing and reading. As Eits builds upon a limited language set, it explores and exploits the combinatory possibilities that language allows for both writer and reader. It demonstrates that all combinatoric potentialities, visible or not, always co-exist in the same time and space, and in this infinite space, individuals are invited to be writers and readers in simultaneity.

Efeito da corrosão do chapeamento do fundo do casco sobre a confiabilidade estrutural de navios.

A engenharia é a ciência que transforma os conhecimentos das disciplinas básicas aplicadas a fatos reais. Nosso mundo está rodeado por essas realizações da engenharia, e é necessário que as pessoas se sintam confortáveis e seguras nas mesmas. Assim, a segurança se torna um fator importante que deve ser considerado em qualquer projeto. Na engenharia naval, um apropriado nível de segurança e, em consequência, um correto desenho estrutural é baseado, atualmente, em estudos determinísticos com o objetivo de obter estruturas capazes de suportar o pior cenário possível de solicitações durante um período de tempo determinado. A maior parte das solicitações na estrutura de um navio se deve à ação da natureza (ventos, ondas, correnteza e tempestades), ou, ainda, aos erros cometidos por humanos (explosões internas, explosões externas e colisões). Devido à aleatoriedade destes eventos, a confiabilidade estrutural de um navio deveria ser considerada como um problema estocástico sob condições ambientais bem caracterizadas. A metodologia probabilística, baseada em estatística e incertezas, oferece uma melhor perspectiva dos fenômenos reais que acontecem na estrutura dos navios. Esta pesquisa tem como objetivo apresentar resultados de confiabilidade estrutural em projetos e planejamento da manutenção para a chapa do fundo dos cascos dos navios, as quais são submetidas a esforços variáveis pela ação das ondas do mar e da corrosão. Foram estudados modelos estatísticos para a avaliação da estrutura da viga-navio e para o detalhe estrutural da chapa do fundo. Na avaliação da estrutura da viga-navio, o modelo desenvolvido consiste em determinar as probabilidades de ocorrência das solicitações na estrutura, considerando a deterioração por corrosão, com base numa investigação estatística da variação dos esforços em função das ondas e a deterioração em função de uma taxa de corrosão padrão recomendada pela DET NORSKE VERITAS (DNV). A abordagem para avaliação da confiabilidade dependente do tempo é desenvolvida com base nas curvas de resistências e solicitações (R-S) determinadas pela utilização do método de Monte Carlo. Uma variação estatística de longo prazo das adversidades é determinada pelo estudo estatístico de ondas em longo prazo e ajustada por uma distribuição com base numa vida de projeto conhecida. Constam no trabalho resultados da variação da confiabilidade ao longo do tempo de um navio petroleiro. O caso de estudo foi simplificado para facilitar a obtenção de dados, com o objetivo de corroborar a metodologia desenvolvida.

Electronic structure of gated graphene and graphene ribbons

We study the electronic structure of gated graphene sheets. We consider both infinite graphene and finite width ribbons. The effect of Coulomb interactions between the electrically injected carriers and the coupling to the external gate are computed self-consistently in the Hartree approximation. We compute the average density of extra carriers n2D, the number of occupied subbands, and the density profiles as a function of the gate potential Vg. We discuss quantum corrections to the classical capacitance and we calculate the threshold Vg above which semiconducting armchair ribbons conduct. We find that the ideal conductance of perfectly transmitting wide ribbons is proportional to the square root of the gate voltage.

Single-electron transport in electrically tunable nanomagnets

We study a single-electron transistor (SET) based upon a II–VI semiconductor quantum dot doped with a single-Mn ion. We present evidence that this system behaves like a quantum nanomagnet whose total spin and magnetic anisotropy depend dramatically both on the number of carriers and their orbital nature. Thereby, the magnetic properties of the nanomagnet can be controlled electrically. Conversely, the electrical properties of this SET depend on the quantum state of the Mn spin, giving rise to spin-dependent charging energies and hysteresis in the Coulomb blockade oscillations of the linear conductance.

Spin-filtered edge states in graphene

Spin–orbit coupling changes graphene, in principle, into a two-dimensional topological insulator, also known as quantum spin Hall insulator. One of the expected consequences is the existence of spin-filtered edge states that carry dissipationless spin currents and undergo no backscattering in the presence of non-magnetic disorder, leading to quantization of conductance. Whereas, due to the small size of spin–orbit coupling in graphene, the experimental observation of these remarkable predictions is unlikely, the theoretical understanding of these spin-filtered states is shedding light on the electronic properties of edge states in other two-dimensional quantum spin Hall insulators. Here we review the effect of a variety of perturbations, like curvature, disorder, edge reconstruction, edge crystallographic orientation, and Coulomb interactions on the electronic properties of these spin filtered states.

Spin alignment of extra electrons in K-phenanthrene clusters taken from the crystalline tripotassium-intercalated phenanthrene structure

The appearance of ferromagnetic correlations among π electrons of phenanthrene (C14H10) molecules in the herringbone structure is proven for K doped clusters both by ab initio quantum-chemistry calculations and by the direct solution of the many-body Pariser-Parr-Pople Hamiltonian. Magnetic ground states are predicted for one or three additional electrons per phenanthrene molecule. These results are a consequence of the small overlap between the lowest unoccupied molecular orbitals (and lowest unoccupied molecular orbitals + 1) of neutral neighboring phenanthrene molecules, which makes the gain in energy by delocalization similar to the corresponding increase due to the Coulomb interaction.

Exponential decay of spin-spin correlation between distant defect states produced by contour hydrogenation of polycyclic aromatic hydrocarbon molecules

The first few low-lying spin states of alternant polycyclic aromatic hydrocarbon (PAH) molecules of several shapes showing defect states induced by contour hydrogenation have been studied both by ab initio methods and by a precise numerical solution of Pariser-Parr-Pople (PPP) interacting model. In accordance with Lieb's theorem, the ground state shows a spin multiplicity equal to one for balanced molecules, and it gets larger values for imbalanced molecules (that is, when the number of π electrons on both subsets is not equal). Furthermore, we find a systematic decrease of the singlet-triplet splitting as a function of the distance between defects, regardless of whether the ground state is singlet or triplet. For example, a splitting smaller than 0.001 eV is obtained for a medium size C46H28 PAH molecule (di-hydrogenated [11]phenacene) showing a singlet ground state. We conclude that π electrons unbound by lattice defects tend to remain localized and unpaired even when long-range Coulomb interaction is taken into account. Therefore they show a biradical character (polyradical character for more than two defects) and should be studied as two or more local doublets. The implications for electron transport are potentially important since these unpaired electrons can trap traveling electrons or simply flip their spin at a very small energy cost.

Can model Hamiltonians describe the electron–electron interaction in π-conjugated systems?: PAH and graphene

Model Hamiltonians have been, and still are, a valuable tool for investigating the electronic structure of systems for which mean field theories work poorly. This review will concentrate on the application of Pariser–Parr–Pople (PPP) and Hubbard Hamiltonians to investigate some relevant properties of polycyclic aromatic hydrocarbons (PAH) and graphene. When presenting these two Hamiltonians we will resort to second quantisation which, although not the way chosen in its original proposal of the former, is much clearer. We will not attempt to be comprehensive, but rather our objective will be to try to provide the reader with information on what kinds of problems they will encounter and what tools they will need to solve them. One of the key issues concerning model Hamiltonians that will be treated in detail is the choice of model parameters. Although model Hamiltonians reduce the complexity of the original Hamiltonian, they cannot be solved in most cases exactly. So, we shall first consider the Hartree–Fock approximation, still the only tool for handling large systems, besides density functional theory (DFT) approaches. We proceed by discussing to what extent one may exactly solve model Hamiltonians and the Lanczos approach. We shall describe the configuration interaction (CI) method, a common technology in quantum chemistry but one rarely used to solve model Hamiltonians. In particular, we propose a variant of the Lanczos method, inspired by CI, that has the novelty of using as the seed of the Lanczos process a mean field (Hartree–Fock) determinant (the method will be named LCI). Two questions of interest related to model Hamiltonians will be discussed: (i) when including long-range interactions, how crucial is including in the Hamiltonian the electronic charge that compensates ion charges? (ii) Is it possible to reduce a Hamiltonian incorporating Coulomb interactions (PPP) to an 'effective' Hamiltonian including only on-site interactions (Hubbard)? The performance of CI will be checked on small molecules. The electronic structure of azulene and fused azulene will be used to illustrate several aspects of the method. As regards graphene, several questions will be considered: (i) paramagnetic versus antiferromagnetic solutions, (ii) forbidden gap versus dot size, (iii) graphene nano-ribbons, and (iv) optical properties.

Derivation of the spin Hamiltonians for Fe in MgO

A method to calculate the effective spin Hamiltonian for a transition metal impurity in a non-magnetic insulating host is presented and applied to the paradigmatic case of Fe in MgO. In the first step we calculate the electronic structure employing standard density functional theory (DFT), based on generalized gradient approximation (GGA), using plane waves as a basis set. The corresponding basis of atomic-like maximally localized Wannier functions is derived and used to represent the DFT Hamiltonian, resulting in a tight-binding model for the atomic orbitals of the magnetic impurity. The third step is to solve, by exact numerical diagonalization, the N electron problem in the open shell of the magnetic atom, including both effects of spin–orbit and Coulomb repulsion. Finally, the low energy sector of this multi-electron Hamiltonian is mapped into effective spin models that, in addition to the spin matrices S, can also include the orbital angular momentum L when appropriate. We successfully apply the method to Fe in MgO, considering both the undistorted and Jahn–Teller (JT) distorted cases. Implications for the influence of Fe impurities on the performance of magnetic tunnel junctions based on MgO are discussed.

Properties of granular analogue model materials: A community wide survey

We report the material properties of 26 granular analogue materials used in 14 analogue modelling laboratories. We determined physical characteristics such as bulk density, grain size distribution, and grain shape, and performed ring shear tests to determine friction angles and cohesion, and uniaxial compression tests to evaluate the compaction behaviour. Mean grain size of the materials varied between c. 100 and 400 μm. Analysis of grain shape factors shows that the four different classes of granular materials (14 quartz sands, 5 dyed quartz sands, 4 heavy mineral sands and 3 size fractions of glass beads) can be broadly divided into two groups consisting of 12 angular and 14 rounded materials. Grain shape has an influence on friction angles, with most angular materials having higher internal friction angles (between c. 35° and 40°) than rounded materials, whereas well-rounded glass beads have the lowest internal friction angles (between c. 25° and 30°). We interpret this as an effect of intergranular sliding versus rolling. Most angular materials have also higher basal friction angles (tested for a specific foil) than more rounded materials, suggesting that angular grains scratch and wear the foil. Most materials have an internal cohesion in the order of 20–100 Pa except for well-rounded glass beads, which show a trend towards a quasi-cohesionless (C < 20 Pa) Coulomb-type material. The uniaxial confined compression tests reveal that rounded grains generally show less compaction than angular grains. We interpret this to be related to the initial packing density after sifting, which is higher for rounded grains than for angular grains. Ring-shear test data show that angular grains undergo a longer strain-hardening phase than more rounded materials. This might explain why analogue models consisting of angular grains accommodate deformation in a more distributed manner prior to strain localisation than models consisting of rounded grains.

Peaceful uses for nuclear explosives : a selected annotated bibliography /

Includes indexes.

Peaceful uses for nuclear explosives : a selected annotated bibliography /

One hundred nine annotated and subject-arranged references are presented to reports and published literature concerning excavation, natural resources development and scientific applications. Author and report number availability indexes are included.

Plowshare : a selected, annotated bibliography of the civil, industrial, and scientific uses of nuclear explosives /

At head of title: TID-3522 (8th rev.); Nuclear explosions--Peaceful applications (TID-4500).