Comparative analysis of performance and stability among composite cross populations, variety mixtures and pure lines of winter wheat in organic and conventional cropping systems

This study investigated the effects of increased genetic diversity in winter wheat (Triticum aestivum L.), either from hybridization across genotypes or from physical mixing of lines, on grain yield, grain quality, and yield stability in different cropping environments. Sets of pure lines (no diversity), chosen for high yielding ability or high quality, were compared with line mixtures (intermediate level of diversity), and lines crossed with each other in composite cross populations (CCPn, high diversity). Additional populations containing male sterility genes (CCPms) to increase outcrossing rates were also tested. Grain yield, grain protein content, and protein yield were measured at four sites (two organically-managed and two conventionally-managed) over three years, using seed harvested locally in each preceding year. CCPn and mixtures out-yielded the mean of the parents by 2.4% and 3.6%, respectively. These yield differences were consistent across genetic backgrounds but partly inconsistent across cropping environments and years. Yield stability measured by environmental variance was higher in CCPn and CCPms than the mean of the parents. An index of yield reliability tended to be higher in CCPn, CCPms and mixtures than the mean of the parents. Lin and Binns’ superiority values of yield and protein yield were consistently and significantly lower (i.e. better) in the CCPs than in the mean of the parents, but not different between CCPs and mixtures. However, CCPs showed greater early ground cover and plant height than mixtures. When compared with the (locally non-predictable) best-yielding pure line, CCPs and mixtures exhibited lower mean yield and somewhat lower yield reliability but comparable superiority values. Thus, establishing CCPs from smaller sets of high-performing parent lines might optimize their yielding ability. On the whole, the results demonstrate that using increased within-crop genetic diversity can produce wheat crops with improved yield stability and good yield reliability across variable and unpredictable cropping environments.

La Niña 2016/2017: historical impact analysis

El Niño conditions developed in the tropical Pacific during the latter half of 2015, peaking in December 2015 as one of the strongest El Niño events on record, comparable with the 1997-98 “El Niño of the century”. Conditions in the tropical Pacific are forecast to return to normal over the coming months, with the potential to transition into La Niña conditions during 2016-17. If this was to occur it would act as a further strong perturbation, or ‘kick’, to the climate system and lead to further significant socio-economic impacts affecting many sectors such as infrastructure, agriculture, health and energy. This report analyses La Niña events over the last 37 years of the satellite era (1979-present) and aims to identify regions where there is an increased likelihood of impacts occurring. It is important to note that this analysis is based on past analogous events and is not a prediction for this year. No two La Niña events will be the same – the timing and magnitude of events differs considerably. More importantly, no two La Niña events lead to the same impacts – other local physical and social factors come into play. Therefore, the exact timings, locations and magnitudes of impacts should be interpreted with caution and this should be accounted for in any preparedness measures that are taken. This report has been produced for Evidence on Demand with the assistance of the UK Department for International Development (DFID) contracted through the Climate, Environment, Infrastructure and Livelihoods Professional Evidence and Applied Knowledge Services (CEIL PEAKS) programme, jointly managed by DAI (which incorporates HTSPE Limited) and IMC Worldwide Limited.

Comparative analysis of the fit of 3-unit implant-supported frameworks cast in nickel-chromium and cobalt-chromium alloys and commercially pure titanium after casting, laser welding, and simulated porcelain firings

This study compared the vertical misfit of 3-unit implant-supported nickel-chromium (Ni-Cr) and cobalt-chromium (Co-Cr) alloy and commercially pure titanium (cpTi) frameworks after casting as 1 piece, after sectioning and laser welding, and after simulated porcelain firings. The results on the tightened side showed no statistically significant differences. On the opposite side, statistically significant differences were found for Co-Cr alloy (118.64 mu m [SD: 91.48] to 39.90 mu m [SD: 27.13]) and cpTi (118.56 mu m [51.35] to 27.87 mu m [12.71]) when comparing 1-piece to laser-welded frameworks. With both sides tightened, only Co-Cr alloy showed statistically significant differences after laser welding. Ni-Cr alloy showed the lowest misfit values, though the differences were not statistically significantly different. Simulated porcelain firings revealed no significant differences.

Patterns of diversification in two species of short-tailed bats (Carollia Gray, 1838): the effects of historical fragmentation of Brazilian rainforests

The small-sized frugivorous bat Carollia perspicillata is an understory specialist and occurs in a wide range of lowland habitats, tending to be more common in tropical dry or moist forests of South and Central America. Its sister species, Carollia brevicauda, occurs almost exclusively in the Amazon rainforest. A recent phylogeographic study proposed a hypothesis of origin and subsequent diversification for C. perspicillata along the Atlantic coastal forest of Brazil. Additionally, it also found two allopatric clades for C. brevicauda separated by the Amazon Basin. We used cytochrome b gene sequences and a more extensive sampling to test hypotheses related to the origin and diversification of C. perspicillata plus C. brevicauda clade in South America. The results obtained indicate that there are two sympatric evolutionary lineages within each species. In C. perspicillata, one lineage is limited to the Southern Atlantic Forest, whereas the other is widely distributed. Coalescent analysis points to a simultaneous origin for C. perspicillata and C. brevicauda, although no place for the diversification of each species can be firmly suggested. The phylogeographic pattern shown by C. perspicillata is also congruent with the Pleistocene refugia hypothesis as a likely vicariant phenomenon shaping the present distribution of its intraspecific lineages. (C) 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2011, 102, 527-539.

Comparative molecular field analysis of a series of inhibitors of HIV-1 protease

Several protease inhibitors have reached the world market in the last fifteen years, dramatically improving the quality of life and life expectancy of millions of HIV-infected patients. In spite of the tremendous research efforts in this area, resistant HIV-1 variants are constantly decreasing the ability of the drugs to efficiently inhibit the enzyme. As a consequence, inhibitors with novel frameworks are necessary to circumvent resistance to chemotherapy. In the present work, we have created 3D QSAR models for a series of 82 HIV-1 protease inhibitors employing the comparative molecular field analysis (CoMFA) method. Significant correlation coefficients were obtained (q(2) = 0.82 and r(2) = 0.97), indicating the internal consistency of the best model, which was then used to evaluate an external test set containing 17 compounds. The predicted values were in good agreement with the experimental results, showing the robustness of the model and its substantial predictive power for untested compounds. The final QSAR model and the information gathered from the CoMFA contour maps should be useful for the design of novel anti-HIV agents with improved potency.

The effects of Ikea and external shopping centers on regional trade and retail growth : A comparative analysis of Ikea’s establishment in Kalmar and Karlstad

This paper examines the effects of Ikea store establishment in Kalmar and Karlstad on the trade and retail inside the two cities, and as well on the trade and retail in the close neighboring municipalities and in further peripheral municipalities in both regions. After the establishment of Ikea store, Kalmar and Karlstad have experienced significant growth in trade and retail. The question, however, is how big this growth is in both cities? And how different locations on different distances from Ikea have been affected? What impact there was on different segments of the retail? How different business branches have been affected? How large the catchment area for the emerging new large-scale retail locations is? These questions, in addition to few others, are investigated in this paper. The thesis starts with an introduction chapter containing a background of the topic, problem description, the investigated questions, the purpose, and the outline of the paper. The next chapter includes the frame of reference which consists of literature review and theoretical framework about the external shopping centers and their impact on retail and regional trade development. It includes also information gathered from previous studies technical reports and other available sources about the subject. The third chapter includes description for the methods used to collect the primary and secondary data needed for the purpose of this study. Then the empirical framework which demonstrates the results of the conducted research followed by analysis and concluded in discussion and conclusion. Mixed methods are used as research strategy in this thesis, and the method to conduct the research is based on telephone interviews for the primary (qualitative) data, and documents and desk research for the secondary (quantitative) data. The gathered data is analyzed and designed in a way that allows the usage of comparative analysis technique to present the findings and draw conclusions. The results showed that new established Ikea retail store outside the city boundaries results with many effects on the city center and on the neighboring municipalities as well. The city center seems not to be affected negatively, but on the contrary positive effects were witnessed in both regions, these positive effects are linked to the increase inflow of customers from the external retail area which is known as spillover effect. III On the other hand, the neighboring towns and municipalities are more negatively affected especially with the trade of con-convenience goods as the consumers in these towns and municipalities start to go to the area of Ikea and the large external retail center to do their purchasing, the substitution effect is then said to be occurred. Moreover, the further far municipalities do not seem to be significantly affected by the establishment of Ikea. These effects whether positive or negative could be monitored by looking to few trade parameters such as the turnover, the sales index, and the consumers’ expenditure, these parameters can be very useful to measure the developments and changes in the trade and retail in a given place. 

Comparative analysis of two selective bleaching methods on alpaca fibers

Dark brown Alpaca fiber was reduced in shade via selective bleaching with peroxide. Two selective oxidative bleaching methods were tested on alpaca top to assess their effectiveness for color removal and fiber quality properties. Color change, bundle strength, weight loss, fiber diameter, surface modification, dye-ability and dye wash fastness were assessed for both methods and compared with the original brown top. Bleach method 1 (BL-I) showed little surface modification, 5.8 % weight loss and 2.4 % strength loss. D1925 yellowness index was reduced to 74.3 from 83.1 and provided a good base for the dyeing of medium to deep shades. Bleach method 2 (BL-II) displayed considerable surface modification, 7.8 % weight loss and 18 % strength loss. BL-II also resulted in a mean diameter reduction of 1.9 micron during bleaching. Yellow-ness was reduced to 64.5 from 83.1 and provided a very good base for the dyeing of medium to deep shades. BL-I showed better exhaustion of the pre-metallised dye Lanaset Violet B than BL-II. Wash fastness for BL-II was 1 grey scale unit poorer than BL-I. BL-II showed far better color clarity at pale depths however the wash fastness of the finished product was not good enough to maintain the depth or clarity of the color. BL-I showed poorer clarity of color but exhibited better wash fastness results.

Behavioral versus demographic predictors of early adoption : a critical analysis and comparative test

Predicting which consumers will be amongst the first to adopt an innovative product is a difficult task but is valuable in allowing effective and efficient use of marketing resources. This paper examines the accuracy of predictions made about likely first adopters based on the most widely accepted theory and compares them to predictions made by examining the relevant past behavior of consumers. A survey of over 1000 consumers examined adoption of an innovative technology: compact fluorescent lightglobes. The results show that variables which were derived from a utility and awareness perspective were a more accurate and managerially useful predictor than the demographic variables derived from the widely accepted theory based on the work of Rogers. It is suggested that these alternative variables could be utilized more readily by marketing managers in many circumstances.

A comparative analysis of international education satisfaction using servqual

University education, the world over, has undergone significant transformation and reform with respect to higher education systems meeting the growing role of information and communication revolution, and the demand for knowledge, which represent the new challenges of globalisation. These challenges are seen as threats as well as opportunities for higher education systems around the world. The driving force of globalisation is competition and the international education market has become fiercely competitive with different marketing strategies being implemented by educational institutions to attract the growing number of students seeking higher education. The objective of this paper is to examine the relationship between the SERVQUAL constructs proposed by Parasuraman et al (1988 & 1985) and the country of origin and satisfaction among four cohorts of Asian international postgraduate students studying in Australian universities. Country of origin is recognized as an important predictor of satisfaction and choice in the international education environment. The data used in this study is derived from a mail survey conducted among international postgraduate students from China, India, Indonesia and Thailand studying in five universities in Victoria, Australia. An adapted version of the SERVQUAL instrument was used to collect the data and was designed to measure the gap between student responses on expectations and perceptions of the university as a study destination on a seven point bi-polar scale. The responses were sought on 36 statements representing aspects of the operations and services of the university under desired (ideal) expectations of choice and post-choice perceptions. Scales were developed to investigate the relationship between the SERVQUAL constructs of reliability, responsiveness, assurance, empathy and tangibles and the country of origin and were shown to be reliable. Using ANOVA and MANOVA techniques, the study found significant differences between country of origin and the SERVQUAL constructs and discusses strategic implications and opportunities for higher
educational institutions

A comparative analysis of opinions of Americans, Australians and Malaysians on the use of biometric devices in workplaces for security and monitoring of worker productivity

Since the September 11, 2001 terrorist attacks in New York, the use of biometric devices such as fingerprint scans, retina and iris scans and facial recognition in everyday situations for national security and border control, have become commonplace. This has resulted in the biometric industry moving from being a niche technology to one that is ubiquitous. As a result. more and more employers are using biometrics to secure staff access to their facilities as well as for tracking staff work hours, maintaining 'discipline' and carry out surveillance against thefts. detecting work hour abuses and fraud. However, the data thus collected and the technologies themselves are feared of having the potential for and actually being misused - both in terms of the violating staff privacy and discrimination and oppression of targeted workers. This paper examines the issue of using biometric devices in organisational settings their advantages, disadvantages and actual and potential abuses from the point of view of critical theory. From the perspectives of Panoptic surveillance and hegemonic organisational control, the paper examines the issues related to privacy and identification, biometrics and privacy, biometrics and the 'body', and surveillance and modernity. The paper also examines the findings ofa survey carried out in Australia. Malaysia and the USA on respondents' opinions on the use of biometric devices in everyday life including at workplaces. The paper concludes that along with their applications in border control and national security, the use of biometric devices should be covered by relevant laws and regulations. guidelines and codes of practice. in order to balance the rights to privacy and civil liberties of workers with employers' need for improved productivity, reduced costs, safeguards related to occupational health and safety, equal opportunity, and workplace harassment of staff and other matters, that employers are legally responsible for.

Digital TV in Australia and the USA: a cross-impact analysis of the adoption and diffusion of digital TV in Australia and the United States

The paper examines the adoption and diffusion of Digital Television (DTV) in Australia and the United States, identifying historical, technical, regulatory, marketing, and other commonalities and differences that appear to be most significant to its adoption, as both countries have experienced a 'sluggish' diffusion and adoption of DTV so far. Using library research and borrowing the cross-impact matrix method from futures research, the authors develop J J events related to the various influences and groups of stakeholders that had shaped the policy making and adoption of DTV. We then carry out a comparative analysis between the two countries to make evident their impacts, strengths, and directions of influence. The authors suggest that the implementation of DTV in these two developed countries appears to be nearly identical. Even though Australian and US broadcasting models are fundamentally different, the diffusion process for DTV is primarily affected by the nature of digital technology and globalisation, two trends that may be diminishing the import of the nation-state in the technology adoption process. The paper concludes that these broader economic and technical events may have greater import to DTV's successful diffusion than do traditional, cultural, and nationalistic factors suggested in earlier comparative broadcast studies.