KClone: A Proposed Approach to Fast Precise Code Clone Detection

In all applications of clone detection it is important to have precise and efficient clone identification algorithms. This paper proposes and outlines a new algorithm, KClone for clone detection that incorporates a novel combination of lexical and local dependence analysis to achieve precision, while retaining speed. The paper also reports on the initial results of a case study using an implementation of KClone with which we have been experimenting. The results indi- cate the ability of KClone to find types-1,2, and 3 clones compared to token-based and PDG-based techniques. The paper also reports results of an initial empirical study of the performance of KClone compared to CCFinderX.

Automatically Adapting Source Code to Document Provenance

Being able to ask questions about the provenance of some data requires documentation on each influence on that data's existence and content. Much software exists, and is being developed, for which there is no provenance-awareness, i.e. at best, the data it outputs can be connected to its inputs, but with no record of intermediate processing. Further, where some record of processing does exist, e.g. as logs, it is not in a form easily connected with that of other processes. We would like to enable compiled software to record useful documentation without requiring prior manual adaptation. In this paper, we present an approach to adapting source code from its original form without manual manipulation, to record information on data provenance during execution.

Dimensionamento de pilares esbeltos de concreto armado

O objetivo deste trabalho é o dimensionamento de pilares esbeltos de concreto armado, sob cargas de curta e longa duração, baseado numa análise realística das deformações do mesmo. Apresenta-se três algoritmos numéricos para a obtencão das relações momento fletor-esforço normal-curvatura de uma seção arbitrária de concreto armado, sob flexo-compressão normal. Inclue-se as deformações específicas de fluência e retração do concreto na análise, através de uma alteração nas referidas relações. Apresenta-se alguns critérios de normas, relativos ao dimensionamento de pilares esbeltos de concreto armado e uma comparação dos mesmos, entre si e com o algoritmo numérico desenvolvido. Considerações da NB-1/78 relativas ao projeto de pilares são analisadas, verificando o nivel da precisão obtida. Um procedimento simplificado para a inclusão da fluência do concreto no dimensionamento, proposto pelo CEB, é testado e uma solução para pilares de concreto armado com engastamento elástico simétrico é apresentada, para verificar o nível: do erro cometido ao se estender o conceito de comprimento de flambagem a pilares de concreto armado. Uma série de exemplos experimentais são apresentados, onde a solução numérica para o dimensionamento tem sua precisão verificada. Diversas tabelas foram desenvolvidas para o dimensionamento de pilares esbeltos com secão transversal retangular e armadura simétrica. Todo o estudo é restrito ao caso de flexo-compressão normal.

Endogenous wage compression and aggregation boundaries in a model of hierarchical human capital

en_US

Dip financing of financially distressed companies in Brazil – the conditions provided by the brazilian bankruptcy law act as real incentives for dip lenders as in chapter 11 of the American bankruptcy code?

O objeto deste trabalho é a compreensão do financiamento de empresas em crise, mais especificamente, o financiamento concedido após o pedido de recuperação judicial, como forma de permitir que a empresa saia da situação de crise e retorne à condição de normalidade. Para tanto, nos apropriando do termo cunhado pela doutrina norte-americana, para fazer referência ao aporte de recursos em empresas em dificuldade, utilizaremos o termo DIP financing ou financiamento DIP. Para uma compreensão adequada do objeto, é necessário que entendamos a origem do DIP financing nos Estados Unidos e como é a regulação norte-americana sobre a matéria atualmente. O segundo passo será avaliar a possibilidade de aplicação da mesma estrutura de aporte de recursos no Brasil. Ao estudarmos a origem desse mecanismo nos Estados Unidos, veremos os problemas que surgiram ao longo dos anos e como foram superados jurisprudencialmente e doutrinariamente para que o financiamento DIP se consolidasse como uma das formas de aporte de capital em empresas em crise, culminando no desenvolvimento de uma verdadeira indústria de crédito às empresas em dificuldade. Uma análise dos problemas enfrentados pelo sistema falimentar americano nos levará a hipótese de que, a menos que sejam afirmados mecanismos que assegurem a quem concede o financiamento após o pedido de recuperação judicial, uma super prioridade no recebimento após a recuperação judicial, será possível o desenvolvimento de um mercado de DIP financing no Brasil.

Compressão de Imagens Usando a Função de Peano e a Transformada Wavelet 1D

In this work, spoke about the importance of image compression for the industry, it is known that processing and image storage is always a challenge in petrobrás to optimize the storage time and store a maximum number of images and data. We present an interactive system for processing and storing images in the wavelet domain and an interface for digital image processing. The proposal is based on the Peano function and wavelet transform in 1D. The storage system aims to optimize the computational space, both for storage and for transmission of images. Being necessary to the application of the Peano function to linearize the images and the 1D wavelet transform to decompose it. These applications allow you to extract relevant information for the storage of an image with a lower computational cost and with a very small margin of error when comparing the images, original and processed, ie, there is little loss of quality when applying the processing system presented . The results obtained from the information extracted from the images are displayed in a graphical interface. It is through the graphical user interface that the user uses the files to view and analyze the results of the programs directly on the computer screen without the worry of dealing with the source code. The graphical user interface, programs for image processing via Peano Function and Wavelet Transform 1D, were developed in Java language, allowing a direct exchange of information between them and the user

Extrinsic compression of popliteal artery in asymptomatic athlete and non-athlete individuals - A comparative study using duplex scan (color duplex sonography)

Aim. Extrinsic compression of the popliteal artery and absence of surrounding anatomical abnormalities characterize the functional popliteal artery entrapment syndrome (PAES). The diagnosis is confirmed to individuals who have typical symptoms of popliteal entrapment and occlusion or important stenosis of the popliteal artery with color duplex sonography (CDS), magnetic resonance imaging (MRI) or arteriography during active plantar flexion-extension maneuvers. However, variable result findings in normal asymptomatic subjects have raised doubts as to the validity of these tests. The purpose of this study was to compare the frequency of popliteal artery compression in 2 groups of asymptomatic subjects, athletes and non-athletes.Methods. Forty-two individuals were studied. Twenty-one subjects were indoor soccer players, and 21 were sedentary individuals. Physical activity was evaluated through questionnaires, anthropometric measurements, and cardiopulmonary exercise test. Evaluation of popliteal artery compression was performed in lower limbs with CDS, ankle-brachial index (ABI) measurements and continuous wave Doppler of the posterior tibial artery.Results. The athletes studied fulfilled the criteria of high level of physical activity whereas sedentary subjects met the criteria of low level of activity. Popliteal artery compression was observed with CDS in 6 (14.2%) studied subjects; 2 of whom (4.7%) were athletes and 4 (9.5%) were non-athletes. This difference was not statistically significant (p=0.21). Doppler of the tibial arteries and ABI measurements gave good specificity and sensibility in the identification of popliteal artery compression.Conclusion. The frequency of popliteal artery compression during maneuvers in normal subjects was 14.2% irrespective of whether or not they performed regular physical activities. Both Doppler and ABI showed good agreement with CDS and should be considered in screening popliteal arteries in individuals suspected of PAES.

Histomorphometric evaluation of periodontal compression and tension sides during orthodontic tooth movement in rats

OBJECTIVE: The purpose of this study was to evaluate the thickness of the periodontal ligament of rat molars during orthodontic tooth movement (OTM). METHODS: Thirty Wistar rats were divided into three groups of 10 animals each: GI, GII and GIII and the mice were euthanized at 7, 14 and 21 days, respectively. Experimental subjects were compared to their respective controls by the Mann-Whitney test. Comparison of values between compression and tension sides were performed during the same and different time periods through Analysis of Variance (ANOVA), Kruskal-Wallis test and, subsequently, Tukey's test. RESULTS: Groups GI and GII showed decreased PDL size in the apical regions of the mesiobuccal root and in the cervical region of the distobuccal root. There was also an increased PDL in the cervical regions of the mesiobuccal root, apical region of the distobuccal root and middle region of both roots. CONCLUSION: The reduction and increase in PDL size were seen in the same root, which characterizes tooth inclination. The apical, middle and cervical regions were compared with one another in each time period and at three times: 7, 14 and 21 days. They were also compared in each region, confirming a tipping movement in GI and GII and a gradual decreased intensity between GI to GII, reaching normal dimension in GIII.

Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R)

Tanomaru-Filho M, Silveira GF, Reis JMSN, Bonetti-Filho I, Guerreiro-Tanomaru JM. Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R). International Endodontic Journal, 44, 1019-1023, 2011.Aim To analyse a method used to evaluate the thermomechanical properties of gutta-percha and Resilon at different temperatures and compression loads.Methodology Two hundred and seventy specimens measuring 10 mm in diameter and 1.5 mm in height were made from the following materials: conventional gutta-percha (GCO). thermoplastic gutta-percha (GTP) and Resilon (R) cones (RE). After 24 h, the specimens were placed in water at 50 degrees C. 60 degrees C or 70 degrees C for 60 s. After that, specimens were placed between two glass slabs, and loads weighing 1.0, 3.0 or 5.0 kg were applied. Images of the specimens were digitized before and after the test and analysed using imaging software to determine their initial and final areas. The thermomechanical property of each material was determined by the difference between the initial and final areas of the specimens. Data were subjected to ANOVA and SNK tests at 5% significance. To verify a possible correlation between the results of the materials, linear regression coefficients (r) were calculated.Results Data showed higher flow area values for RE under all compression loads at 70 degrees C and under the 5.0 kg load at 60 degrees C (P < 0.05). Regarding gutta-percha, GTP showed higher flow under loads weighing 3.0 and 5.0 kg. at 60 and 70 degrees C (P < 0.05). GCO presented higher flow at 70 degrees C with a load of 5.0 kg. Regression analyses showed a poor linear correlation amongst the results of the materials under the different experimental conditions.Conclusion Gutta-percha and Resilon (R) cones require different compression loads and temperatures for evaluation of their thermomechanical properties. For all materials, the greatest flow occurred at 70 degrees C under a load of 5.0 kg: therefore. these parameters may be adopted when evaluating endodontic tilling materials.

Influence of compression forces on tablets disintegration by AC Biosusceptometry

Analysis of physical phenomena that occurs during tablet disintegration has been studied by several experimental approaches; however none of them satisfactorily describe this process. The aim of this study was to investigate the influence of compression force on the tablets by associating the AC Biosusceptometry with consolidated methods in order to validate the biomagnetic technique as a tool for quality control in pharmaceutical processes.Tablets obtained at five compression levels were submitted to mechanical properties tests. For uncoated tablets, water uptake and disintegration force measurements were performed in order to compare with magnetic data. For coated tablets, magnetic measurements were carried out to establish a relationship between physical parameters of the disintegration process. According to the results, differences between the compression levels were found for water uptake, force development and magnetic area variation measurements. ACB method was able to estimate the disintegration properties as well as the kinetics of disintegration process for uncoated and coated tablets. This study provided a new approach for in vitro investigation and validated this biomagnetic technique as a tool for quality control for pharmaceutical industry. Moreover, using ACB will also be possible to test these parameters in humans allowing to establish an in vitro/in vivo correlation (IVIVC). (C) 2007 Elsevier B.V. All rights reserved.