松辽徐家围子断陷层序地层充填模式及含油气性特征

Based on the principle and method of sequence, the author describes the sequence-filling model of the rifting basin of Xujiaweizi and its gas exploration potential. The object of this paper belongs to the area around Shengping-Wangjiatun anticline. Its srtatigraphy includes Huoshiling Formation (neutral and basic volcanic rocks), Shahezi Formation (coal bedding and mud and some sandstone) and Yingcheng Formation from bottom to top. These stratigraphy units are defined by author as mesosequences respectively. The author emphasizes that the main control factors of sequence change with the types of basin and stage of basin. So the sequence is researched according to the types of basin. This viewpoint is very new, and it is consistent with the principle of sequence. Volcanic action is very frequent and acute, topography difference is obvious. Between the volcanic events, Shahezi Formation is formed, which mainly consists-of sedimentary rocks. Based on the datum from seismic section and drilling core and well-logging, the author analyzes the single unit and unit set and system tract and sedimentary fancies, then, according to the accommodation space change and marking of sequence boundary, Shahezi Formation is divided into two Third-scale sequences. The sedimentary fancies and depth distribution are described. The author also pointed out that the volcanic rocks consume the accommodation space, so volcanic rocks can influence the development of sequence. Based on the concept of accommodation space, the author put volcanic rocks into sequence frame, which normally consists of sedimentary rocks. The topography of volcanic is controlled by lithology of volcanic rocks, the pattern of volcanic eruption and the topography before volcanic eruption. The topography of volcanic can influence sedimentation and the filling pattern of sedimentary rocks. The author describes the composition and lithology fancies and depth distribution of volcanic rocks. The volcanic rocks and Volcanic building, volcanic structure is recognized on seismic section. The author paid a special attention to the relationship between sedimentation and volcanism. Finally, the author analyses the combination of source-reservoir-cover unit in sequence frame. The mudstone of Shahezi Formation has a great depth, the Kerogene in it belongs to type II and III, which tends to produce gas. The Yingcheng Formation lies between Shahezi Formation and Denglouku Formation, belonging to good reservoir. The volcanic rocks of Huoshiling Formation often formed high building, which can capture the gas produced from Shahezi Formation. The stratigraphy of rifting basin of Xujiaweizi has the great potential of gas exploration. This paper claims the following creative points: 1. The author applied the principle and method of sequence to rifting basin, greatly extending its research area and topic issues. 2. The author pointed out that basin of different type and of different stage has a different type of sequence. This is caused by the different main control factors of sequence. 3. Put volcanic rocks into the sequence frame, discussing the probability of regarding the volcanic rocks as the component of sequence, dealing with the relationship between sedimentation and volcanism and its influence to the source-reservoir-cover system. 4. The author pointed out that the filling pattern of rifting basin are determined by the filling pattern of megasequence, whose filling pattern is determined by the filling pattern of system tract and the change of accommodation space.

准噶尔盆地侏罗系层序格架和油气成藏条件研究

Jurassic is an important hydrocarbon-bearing formation in Junggar Basin. Analyzing in strata sequence stratigraphy and hydrocarbon formation has both theoretical and practical values. First of all, strata sequence stratigraphy of continental facies is a new development and supplement in the theory of stratigraphic geology. Stratum of continental facies, unlike sea facies, has rich sup-plements, rapid facies changes, and was influenced slightly by sea level changes. The structural background and sedimentary environment of the basin in west China are greatly different from those of the basins in east China. So it is important to build the patterns of strata sequence stratigraphy in west China basins. Secondly, it is also of significance to find out all kinds of traps, for the dominant types are structural ones so far. After 50 years exploration, the stratigraphic or litholigic traps have become the main concern. This desertation is mainly focused on establishing the isochronal strtaum frame for Junggar Basin to show the evolvement characters of the basin sediment system and the regionalstuctrue background. By analyzing the conditions and patterns of the regional oil and gas bearing formations with typical cross-sections, we have established the patterns of sedimentary conditions for different reserviors. By authur's study, several fruitful results have been obtained in the following: Strata sequence frame and evolvement characteristics of Jurassic: By studing strata sequence, Jurassic has been divided into 2 second rank strata sequences and 3 third rank strata sequences based on the interface unconformities. Only 2 fourth rank strata sequences were grouped in BaDaoWan group. Also different seismic facies and sediment units have been recognized with the establishment of the of sediment system model. The oil-gas system characteristics in Jurassic: We conclude that hydrocar bon resources have the best oil potential. Potential of coal, carbonaceous and dark mudstone were reduced in turn. In this thesis we have made the evaluation of three hydrocarbon sources and the distribution oil-gas resource, and studied the potentials of hydrocarbon and evolvement for each kind of micro-component of the two main resource rocks. Prediction of paleo-temperature: In Junggar basin the evolvement of paleo-ground temperature can be divided into three stages. From Carboniferous to early Permian grads of ancient ground temperature was 8-5 ℃/100m, 5-3 ℃/100m from later period of Permian to end Trias, 3-2 ℃/100m from Jurassic to early Tertiary. Patterns of Jurassic hydrocarbon-bearing reserviors: There were two kinds of hydrocarbon source of Permian and Jurassic. They form different hydrocarbon - bearing systems. Six fundamental hydrocarbon - bearing trap modeS have been established. Directions for later exploration: There were two kinds of regional belts in Jurassic, One is structural belt caused by Yanshan and Ximalaya process, and the other was the stratum one caused by paleostructural rises.

溶蚀岩体渗透水力学特性研究

Seepage control in karstic rock masses is one of the most important problems in domestic hydroelectric engineering and mining engineering as well as traffic engineering. At present permeability assessment and leakage analysis of multi-layer karstic rock masses are mainly qualitative, while seldom quantitative. Quantitative analyses of the permeability coefficient and seepage amount are conducted in this report, which will provide a theoretical basis for the study of seepage law and seepage control treatment of karstic rocks. Based on the field measurements in the horizontal grouting galleries of seepage control curtains on the left bank of the Shuibuya Hydropower Project on the Qingjiang river, a hydraulic model is established in this report, and the computation results will provide a scientific basis for optimization of grouting curtain engineering. Following issues are addressed in the report. (1) Based on the in-situ measurements of fissures and karstic cavities in grouting galleries, the characteristics of karstic rock mass is analyzed, and a stochastic structural model of karstic rock masses is set up, which will provide the basis for calculation of the permeability and leakage amount of karstic rock mass. (2) According to the distribution of the measured joints in the grouting galleries and the stochastic results obtained from the stochastic structural model of karstic rock mass between grouting galleries, a formula for computation of permeability tensor of fracturing system is set up, and a computation program is made with Visual Basic language. The computation results will be helpful for zoning of fissured rock masses and calculation of seepage amount as well as optimization of seepage control curtains. (3) Fractal theory is used to describe quantitatively the roughness of conduit walls of karstic systems and the sinuosity of karstic conduits. It is proposed that the roughness coefficient of kastic caves can be expressed by both fractal dimension Ds and Dr that represent respectively the extension sinuosity of karstic caves and the roughness of the conduit walls. The existing formula for calculating the seepage amount of karstic conduits is revised and programmed. The seepage amount of rock masses in the measured grouting galleries is estimated under the condition that no seepage control measures are taken before reservoir impoundment, and the results will be helpful for design and construction optimization of seepage curtains of the Shuibuya hydropower project. This report is one part of the subject "Karstic hydrogeology and the structural model and seepage hydraulics of karstic rock masses", a sub-program of "Study on seepage hydraulics of multi-layer karstic rock masses and its application in seepage control curtain engineering", which is financially supported by the Hubei Provincial key science and technology programme.

金属矿集区深层结构高分辨率地震探测——以安徽铜陵金属矿为例

The reflection seismic prospecting technique is an important and a widely used method in the petroleum and coal surveying, and has been developed to a perfectly mature technique from the aspects of data acquisition, data processing to data interpretation. However, the metallic mine seismic prospecting, especially the high resolution seismic prospecting technique are being still in the course of studying and probing up to now. In this paper, the basic theory and the present situation of study on metallic mine seismic reflection are expatiated, the basic theory, the improving measure, the converging velocity and the ability on the integrating global optimization method are also illuminated in detail at first. Then the basic theory, the realization process and the practicing effects of the vector suppressing noise algorithm are also introduced. On the basis of studying of applying the integrating global optimization method to static correction and the vector suppressing noise algorithm, we elaborate processed the seismic data of Tongling metallic mine. We introduced the processing flow, the key steps and the processing effects. Basing on the processing results, we analyzed the major reflection characteristics, the geological interpretation results and the earth's crust top reflection structure and the space distribution status of Wutong set, the space shape of part lithological body and the contacting relations of horizonsunveiled.

Data Reduction with Rough Sets

R. Jensen, Q. Shen, Data Reduction with Rough Sets, In: Encyclopedia of Data Warehousing and Mining - 2nd Edition, Vol. II, 2008.

Estudo do processo de difusão de gases em carvões com base em isotérmicas de Langmuir

Tese de Doutoramento apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Doutror em Ciências da Terra.

Characterisation of weldpool shapes in the laser welding of thick plates

We consider the problem of finding the heat distribution and the shape of the liquid fraction during laser welding of a thick steel plate using the finite volume CFD package PHYSICA. Since the shape of the keyhole is not known in advance, the following two-step approach to handling this problem has been employed. In the first stage, we determine the geometry of the keyhole for the steady-state case and form an appropriate mesh that includes both the workpiece and the keyhole. In the second stage, we impose the boundary conditions by assigning temperature to the walls of the keyhole and find the heat distribution and the shape of the liquid fraction for a given welding speed and material properties. We construct a fairly accurate approximation of the keyhole as a sequence of include sliced cones. A formula for finding the initial radius of the keyhole is derived by determining the radius of the vaporisation isotherm for the line heat source. We report on the results of a series of computational experiments for various heat input values and welding velocities.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Dimensionamento do Sistema Híbrido para Alimentação de Energia Elétrica da Escola Rural de Nangade (Cabo Delgado)

Os combustíveis fósseis, como o carvão, o petróleo e o gás, constituem fontes de energia que em breve se esgotarão e que são demasiado caras para serem desperdiçadas pelas centrais elétricas na produção de electricidade. Para além desse facto, existem outros argumentos (sobretudo económicos) que inviabilizam a utilização destas fontes de energia em algumas regiões, abrindo caminho a fontes de energia alternativas (e.g. solar, eólica, biomassa, mini-hídricas, geotérmicas, etc) e preferencialmente com contornos locais. No caso particular de Moçambique, tem-se verificado um interesse crescente por parte do governo e de várias ONGs na promoção do uso de energias alternativas para as zonas onde a energia convencional não chega e não chegará, devido aos custos muito elevados que esse processo acarretaria. Esta dissertação apresenta um estudo aprofundado do dimensionamento dum sistema híbrido de geração de energia elétrica envolvendo gerador FV e grupo eletrogéneo de emergência para a Escola Rural da Nangade, situada no Distrito de Nangade, na Província do Cabo Delgado. São também descritos os diversos componentes e as tecnologias associadas a um sistema deste género, com a inclusão de sistemas inteligentes de controlo de energia com a utilização de inversores bidireccionais (inversores de bateria e carregadores) para sistemas isolados. Os resultados são apresentados de forma a facilitar a aplicação e montagem deste tipo de sistemas in loco. Espera-se que esta dissertação possa servir de base no futuro próximo, para a implementação deste tipo de sistemas para permitir a melhoria da qualidade de ensino através de melhores infraestruturas, democratizando desta forma o acesso à educação para as crianças das zonas rurais das várias províncias de Moçambique. Como as energias renováveis são parte integrante do Sistema Elétrico Nacional, apresenta-se resumidamente, no anexo 17, o “Plano de Desenvolvimento na Área de Energia de Moçambique”.

Anne McPherson family fonds, 1852-2011 [non-inclusive]

Frank C. (Case) McCordick (1873-1946) was the son of William Henry (1849-1930) and Emily D. Howell (1851-1927) McCordick. William H. McCordick was in the coal business. The McCordick family included Frank Case, Mabel Gertrude, Ethel Howell and Arthur Stanley. Frank C. McCordick was educated in St. Catharines, and worked with his father in the coal business and eventually opened up a leather tanning operation. McCordick was active in the Lincoln Regiment and in 1906 was promoted to captain and in command of Company A, 19th Regiment. He was promoted to major and at the outbreak of war he was sent overseas as a commander of the 35th Battalion of the Canadian Expeditionary Forces (CEF). Upon arrival in France he was made officer commanding the 15th Battalion, King’s Own Yorkshire Light Infantry (KOYLI). After the war and his return to Canada he continued to play an active role in the local military units in the area as well as in Hamilton. After his retirement from the military in 1927 McCordick served as alderman and then mayor of St. Catharines from 1930 to 1931. He was a member of a large number of civic clubs, including St. Catharines Chamber of Commerce, Y.M.C.A., Lion’s Club, St. Catharines Golf Club, Detroit Boat Club, the St Catharines Club, as well as a member of several Masonic lodges. He continued to operate McCordick Tannery and other local investments. In 1903 Frank C. McCordick married May Beatrice Simson, daughter of Thomas E. Simson of Thorold. They had three children, E. (Edward) Frank McCordick, Bruce McCordick and (Margaret) Doris McCordick (m. Hubert Grigaut, d. 1977). The McCordick family resided at 82 Yates Street, near Adams Street. May Simson McCordick (b. 1873) was the daughter of Thomas Edward (1836-1908) and Julia Headlam (1844-1887) Simson of Thorold. Her siblings included: Edward, Frances, John, Augusta, Georgia and Gertrude. E. (Edward) Frank McCordick (1904-1980) was born in St. Catharines, Ont., attended Lake Lodge School in Grimsby, Ridley College in St. Catharines, Beechmont Preparatory School in England, Upper Canada College in Toronto and graduated from Royal Military College in Kingston, Ont. in 1925. Upon graduation he was made a lieutenant in the 10th (St. Catharines) Field Battery. In 1929 he married Helen Stanley Smith, daughter of Stanley George and Mary Walker Smith of St. Catharines. Col. McCordick, now promoted to Major, played an active role in the 10th (St. Catharines) Field Battery, being officer commanding the battery. In late 1939 McCordick headed to England for artillery tactical training and on December 6, 1939 the battery began the long trek overseas. McCordick saw action in Italy and in Holland. Upon his return to Canada at the end of the war he was the Liberal candidate in the federal election for Lincoln County. He remained active in the local military serving as honorary lieutenant-colonel of the 56th Field Regiment (ARCA) and in 1976 as the honorary colonel of the regiment. Col. McCordick held the Efficiency Decoration, the Order of the British Empire, granted in 1945 and was made an officer in the Order of St. John in 1978. He continued to serve his community in various capacities, including the Unemployment Insurance Canada Board, Royal Trust Company and the St. John Ambulance Society. He remained an active member of the alumni of Royal Military College, editing and compiling a newsletter and organizing reunion weekends. He kept in close contact with many of his classmates. Helen Stanley Smith McCordick lived in St. Catharines, Ont., attended Robertson School, and graduated from the University of Toronto in 1926 with a Bachelor of Arts degree in Modern Languages. During the war years (1939-1945) Helen was active in the Transport division of the local branch of the Canadian Red Cross and the Women’s Auxiliary of the 10th Field Battery. In 1932 E. Frank and Helen McCordick welcomed their only child, (Catharine) Anne McCordick. Helen continued to play an active role in her community until her passing in 1997. Stanley George Smith (1865-1960) was born in St. Catharines, Ont., the only child of William Smith (d. June 16, 1876) a native of Edinburgh, Scotland and his wife Hannah Louisa Maria Bulkeley a native of Fairfield, Connecticut. Stanley George Smith married Mary Walker of Guelph, Ont.(d. 1956) Mary was the daughter of Hugh and Elizabeth (d. 1924) Walker. Her siblings included Margaret, Agnes, Jessie, Isabella, Lorne, Ada, Alice, Eva, Alexander and George. Hugh Walker was a prominent fruit and vegetable merchant in Guelph. On 1904 their only child, Helen Stanley Smith was born. He was a post office clerk, and the treasurer for the James D. Tait Co. Ltd., a clothing and dry goods retailer in St. Catharines. The family lived at 39 Church Street in St. Catharines, Ont.

J.W. Spencer fonds, 1866, 1881-1921

Joseph William Winthrop Spencer (commonly known as J.W. Spencer) was a geologist and geomorphologist best known for his work on the geology of southern Ontario and the Great Lakes. He was born in Dundas, Upper Canada in 1851, but moved to Hamilton, Ontario in 1867. In 1871, he began studies in geology at McGill College in Montreal. In 1875 he worked in the Michigan copper mines and shortly afterwards prepared a thesis on the copper deposits. He submitted this thesis to the University of Gottingen in Germany in 1877 and was awarded a doctorate in geology, the second Canadian to earn a doctorate in this field. In 1880, he became a professor of geology and chemistry at King’s College in Windsor, N.S. Subsequently, he taught at the University of Missouri, and then the University of Georgia, but moved to Washington, D.C. in 1894, where he worked as a consultant geologist. Spencer spent much of his life studying preglacial river valleys in Ontario and the origins of the Great Lakes, as well as the Niagara River and Falls. In 1907, he published a book titled The Falls of Niagara: their evolution and varying relations to the Great Lakes. His opinions in these areas differed from some of his contemporaries, namely the American geologist Grove Karl Gilbert. Gilbert published a review of the The Falls of Niagara that exposed some flaws and inaccuracies in Spencer’s estimate of the age of the falls. Spencer’s studies also took him to the Caribbean and Central America. In 1920 he moved back to Canada, but died the following year.

Intégration de la pensée cycle de vie aux études d'impacts : cas du site minier Raglan

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Avaluació de la tècnica de fitoextracció per a la reducció de concentracions de metalls pesants en sòls contaminats per la indústria minera

L’explotació minera, especialment la mineria metàl•lica, ha estat sempre associada a riscos de contaminació ambiental de sòls, aigües i vegetació, originats per l’activitat extractiva, les operacions de concentració dels minerals i pels emplaçaments de residus miners sense una gestió adequada. En molts casos els residus miners s’abocaven directament a rius i rierols o s’acumulaven en piles pròximes a centres habitats i activitats agrícoles. Concretament s’estudia els cas de les mines d’Osor. Donada la possible presència de quantitats elevades de metalls pesants en aquests sòls es decideix avaluar una tècnica de remediació de sòls lleugera com la fitoextracció. La fitoextracció es basa en l’ús de plantes bioacumuladores que absorbeixen metalls del sòl. Aquesta tècnica permet una descontaminació del sòl no agressiva i de baix cost però requereix un tractament de llarga durada