Utilização da levedura desidratada (Saccharomyces cerevisiae) para leitões na fase inicial

Foi conduzido um experimento com o objetivo de avaliar o efeito da adição de diferentes níveis de levedura (Saccharomyces cerevisiae) desidratada na ração sobre o desempenho e a morfologia intestinal de leitões na fase inicial. Foram utilizados 280 leitões (fêmeas e machos castrados) de uma linha genética comercial de suínos, desmamados com 21 dias de idade e distribuídos em 20 baias, de acordo com o delineamento em blocos ao acaso, com 5 repetições e 4 tratamentos experimentais (0, 5, 10 e 15% de adição de levedura). Aos 45 dias de idade, três leitões de cada tratamento foram abatidos e colhidas amostras do duodeno e do jejuno para estudo da morfologia intestinal. Os níveis crescentes de levedura desidratada nas rações não afetaram (P>0,05) o ganho de peso, o consumo de ração e a conversão alimentar dos leitões. Com relação à morfologia do duodeno e do jejuno, também não houve efeito (P>0,05) dos níveis de levedura estudados sobre a altura das vilosidades, das profundidades das criptas e da relação vilosidade/cripta. Os resultados permitiram concluir que a levedura desidratada pode ser adicionada em até 15% nas rações de suínos na fase inicial.

Avaliação de níveis e fontes de proteína na alimentação de leitões na fase inicial de crescimento

Um experimento foi conduzido para comparar diversos níveis e fontes protéicas utilizados em rações sobre o desempenho, a morfometria intestinal e a relação peso de pâncreas/peso de carcaça de leitões de 36 a 70 dias de idade. Foram utilizados 96 leitões desmamados distribuídos em delineamento de blocos ao acaso com seis tratamentos e quatro repetições de quatro animais. Avaliaram-se seis fontes protéicas (tratamentos): leite em pó desnatado (8,80 e 12,00%); isolado protéico de soja (3,20 e 4,50%); farinha de peixe (5,00%); e levedura seca (10,00%). As dietas, isoenergéticas e isoprotéicas, não afetaram o ganho de peso e a conversão alimentar dos animais, contudo, os animais que receberam a dieta contendo leite em pó desnatado apresentaram maior consumo no período de 56 a 63 dias de idade. Não houve efeito significativo das fontes protéicas sobre a altura de vilos, a profundidade de cripta e a relação peso do pâncreas/peso corporal. As fontes protéicas estudadas e os níveis utilizados nas dietas não influenciaram o desempenho, a morfologia intestinal e a relação peso de pâncreas/peso de carcaça em leitões de 36 a 70 dias de idade

Performance and morphology of intestinal mucosa of broilers fed mannan-oligosaccharides and enzymes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Níveis de substituição do leite em pó desnatado pelo isolado protéico de soja na dieta de leitões desmamados

Objetivou-se verificar o efeito da substituição do leite desnatado em pó pelo isolado protéico de soja em rações para leitões desmamados aos 21 dias de idade sobre o desempenho, a morfometria intestinal e relação peso de pâncreas/peso de carcaça. Foram utilizados 80 leitões desmamados, no período de 21 a 35 dias de idade, distribuídos em delineamento de blocos ao acaso com cinco tratamentos, quatro repetições e quatro animais por unidade experimental (dois machos e duas fêmeas), totalizando 16 leitões por tratamento. Os tratamentos consistiram na substituição protéica (0, 25, 50, 75 e 100%) do leite desnatado em pó pelo isolado protéico de soja. Todas as dietas apresentaram mesmo conteúdo protéico (20,00%), energético (3420 kcal ED/kg de dieta) e de lactose (8,16%). Foram analisados parâmetros de desempenho (ganho de peso, consumo e conversão alimentar) e relação entre peso de pâncreas/peso de carcaça. Realizou-se análise morfométrica do intestino delgado, abatendo-se seis animais/tratamento ao término do período experimental. Observou-se efeito quadrático dos tratamentos para ganho de peso e conversão alimentar e efeito linear negativo para consumo de ração. Não houve alterações morfométricas para altura de vilosidade, profundidade de criptas e para a relação entre peso de pâncreas/peso de carcaça. Concluiu-se que o isolado protéico de soja pode substituir a proteína do leite em pó desnatado em 34,25% para máximo ganho de peso e 51,00% para melhor conversão alimentar. A substituição total da proteína láctea pela proteína da soja não afetou a integridade do vilo e a relação entre peso de pâncreas/peso de carcaça.

Fontes de lactose, níveis de lisina dietéticos e peso dos leitões ao desmame

Desenvolveu-se um experimento com o objetivo de avaliar o uso de fontes de lactose (soro de leite em pó e lactose) e níveis de lisina em rações (1,20 e 1,50%), além do peso ao desmame (<6,0 e >6,0 kg), sobre o desempenho e a morfologia intestinal de 384 leitões desmamados com diferentes pesos e idade de 21 dias. Os leitões foram distribuídos em delineamento inteiramente casualizado em esquema fatorial 2 x 2 x 2, totalizando oito tratamentos em quatro repetições cada. Três leitões de cada tratamento foram abatidos aos 42 dias de idade, quando foram coletadas amostras do duodeno para estudo da morfologia intestinal. Foram avaliadas as características de desempenho ganho de peso, consumo de ração e conversão alimentar. Altura das vilosidades, profundidade de criptas duodenais e a relação altura de vilosidades/profundidade de criptas, bem como a relação peso do pâncreas/peso da carcaça, foram as características morfológicas avaliadas. O uso de lactose em rações à base de milho e farelo de soja proporcionou melhor desempenho dos leitões quando combinado a um nível de 1,5% de lisina. Concluiu-se ainda que os tipos de dietas estudados não exerceram efeito sobre a morfologia do duodeno e a relação peso do pâncreas/peso corporal e que a altura das vilosidades é uma função direta do peso do leitão.

Identificação de nematóides através de técnicas de processamento inteligentes de imagens

abstract

Uma arquitetura para detecção online de transientes em sinais de eletrocardiograma sobre o protocolo IEEE 802.3 com PM-AH

The occurrence of transients in electrocardiogram (ECG) signals indicates an electrical phenomenon outside the heart. Thus, the identification of transients has been the most-used methodology in medical analysis since the invention of the electrocardiograph (device responsible for benchmarking of electrocardiogram signals). There are few papers related to this subject, which compels the creation of an architecture to do the pre-processing of this signal in order to identify transients. This paper proposes a method based on the signal energy of the Hilbert transform of electrocardiogram, being an alternative to methods based on morphology of the signal. This information will determine the creation of frames of the MP-HA protocol responsible for transmitting the ECG signals through an IEEE 802.3 network to a computing device. That, in turn, may perform a process to automatically sort the signal, or to present it to a doctor so that he can do the sorting manually

Acelerando algoritmos de baixo nível em visão robótica com hardware reconfigurável

A challenge that remains in the robotics field is how to make a robot to react in real time to visual stimulus. Traditional computer vision algorithms used to overcome this problem are still very expensive taking too long when using common computer processors. Very simple algorithms like image filtering or even mathematical morphology operations may take too long. Researchers have implemented image processing algorithms in high parallelism hardware devices in order to cut down the time spent in the algorithms processing, with good results. By using hardware implemented image processing techniques and a platform oriented system that uses the Nios II Processor we propose an approach that uses the hardware processing and event based programming to simplify the vision based systems while at the same time accelerating some parts of the used algorithms

Sistema radicular e nutrição da soja em função da compactação do solo

A compactação do solo diminui o crescimento radicular, podendo afetar tanto o desenvolvimento quanto a produtividade da soja. No presente trabalho, estudaram-se os efeitos da compactação subsuperficial na morfologia radicular da soja (Glycine max L. Merrill), procurando relacioná-los ao crescimento e à nutrição da planta. O 'Primavera' foi cultivado até os 37 dias da emergência, em vasos onde a camada de 15-18,5 cm de profundidade foi campactada a 1,03, 1,25, 1,48 e 1,72 g/cm³, em um latossolo vermelho-escuro com 80% de areia e 16% de argila e cuja compactação em subsuperfície levou a um acúmulo de raízes na camada superficial do vaso, sem grandes conseqüências na nutrição da planta. Na densidade aparente de 1,72 g/cm3, as raízes não conseguiram penetrar, embora já houvesse alguma restrição ao crescimento na densidade de 1,25 g/cm³. Quando a camada compactada apresentava resistência à penetração de 0,69 MPa, houve uma redução de 50% no crescimento radicular da soja.

Compressão Seletiva de Imagens Coloridas com Detecção Automática de Regiões de Interesse

There has been an increasing tendency on the use of selective image compression, since several applications make use of digital images and the loss of information in certain regions is not allowed in some cases. However, there are applications in which these images are captured and stored automatically making it impossible to the user to select the regions of interest to be compressed in a lossless manner. A possible solution for this matter would be the automatic selection of these regions, a very difficult problem to solve in general cases. Nevertheless, it is possible to use intelligent techniques to detect these regions in specific cases. This work proposes a selective color image compression method in which regions of interest, previously chosen, are compressed in a lossless manner. This method uses the wavelet transform to decorrelate the pixels of the image, competitive neural network to make a vectorial quantization, mathematical morphology, and Huffman adaptive coding. There are two options for automatic detection in addition to the manual one: a method of texture segmentation, in which the highest frequency texture is selected to be the region of interest, and a new face detection method where the region of the face will be lossless compressed. The results show that both can be successfully used with the compression method, giving the map of the region of interest as an input

Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co

Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WC Co, and additionally affected by the microstructure of WC powders before sintering. An important feature is that the toughness and the hardness increase simultaneously with the refining of WC. Therefore, development of nanostructured WC Co hardmetal has been extensively studied. There are many methods to manufacture WC-Co hard metals, including spraying conversion process, co-precipitation, displacement reaction process, mechanochemical synthesis and high energy ball milling. High energy ball milling is a simple and efficient way of manufacturing the fine powder with nanostructure. In this process, the continuous impacts on the powders promote pronounced changes and the brittle phase is refined until nanometric scale, bring into ductile matrix, and this ductile phase is deformed, re-welded and hardened. The goal of this work was investigate the effects of highenergy milling time in the micro structural changes in the WC-Co particulate composite, particularly in the refinement of the crystallite size and lattice strain. The starting powders were WC (average particle size D50 0.87 μm) supplied by Wolfram, Berglau-u. Hutten - GMBH and Co (average particle size D50 0.93 μm) supplied by H.C.Starck. Mixing 90% WC and 10% Co in planetary ball milling at 2, 10, 20, 50, 70, 100 and 150 hours, BPR 15:1, 400 rpm. The starting powders and the milled particulate composite samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) to identify phases and morphology. The crystallite size and lattice strain were measured by Rietveld s method. This procedure allowed obtaining more precise information about the influence of each one in the microstructure. The results show that high energy milling is efficient manufacturing process of WC-Co composite, and the milling time have great influence in the microstructure of the final particles, crushing and dispersing the finely WC nanometric order in the Co particles

Anodização para obtenção de membranas cerâmicas

This a study on the achievement of alumina membranes by the method of anodizing. From this method got up a layer of aluminum oxide on the anodic metal, who presented the basic properties necessary for the application as a support for the production and acquisition of nanomaterials, such as porosity nano and resistance to high temperature, and other properties, as resistance to corrosion, and chemical, high ranking of the structure and pore size of the pores. The latter, ranging from 10 to 100nm depended on the electrolyte used, which in this study was the H2SO4. To remove all remaining aluminum, it is a bath of dissolution with HCl and CuCl where the residual aluminum has been withdrawn, and the deep pores were opened after chemical treatment with NaOH. After the dissolution, the membranes were calcined at temperatures of 300, 600 and 900° C, and sintered at temperatures of 1200 and 1300º C to win mechanical strength, porosity and observe the desired crystallization. Then went through analyses of composition through X-ray diffraction and morphology of the microstructure through a scanning electron microscope. The method was effective for obtaining alumine membranes applied in the processes of production of materials in nano

Estudo das propriedades termofísicas com variação da expansibilidade de compósito desenvolvido com matriz PUR-NOP e carga funcional de argilomineral

In this study were conducted experimental procedures for determination of variation of the expandability of rigid polyurethane foam (PUR) from a natural oil polyol (NOP), specifically the Castor oil plant, Ricinus communis, pure and additions of the vermiculite in phase dispersed in different percentage within a range from 0% to 20%, mass replacement. From the information acquired, were defined the parameters for production of bodies of test, plates obtained through controlled expansion, with the final volume fixed. Initially, the plates were subjected to thermal performance tests and evaluated the temperature profiles, to later be extracted samples duly prepared in accordance with the conditions required for each test. Was proceeded then the measurement of the coefficient of thermal conductivity, volumetric capacity heat and thermal diffusivity. The findings values were compared with the results obtained in the tests of thermal performance, contributing to validation of the same. Ultimately, it was investigated the influence that changes in physical-chemical structure of the material had exerted on the variation of thermophysical quantities through gas pycnometry, scanning electron microscopy (SEM) combined with energy dispersive X-ray fluorescence spectroscopy (EDXRF), infrared spectroscopy using Fourier transform (FTIR), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Based on the results obtained was possible to demonstrate that all load percentage analyzed promoted an increase in the potential expansion (PE) of the resin. In production of the plates, the composites with density near at the free expansion presented high contraction during the cure, being the of higher density adopted as definitive standard. In the thermal performance tests, the heating and cooling curves of the different composites had presented symmetry and values very close for lines of the temperature. The results obtained for the thermophysical properties of composites, showed little difference in respect of pure foam. The percentage of open pores and irregularities in the morphology of the composites were proportionate to the increment of vermiculite. In the interaction between the matrix and dispersed phase, there were no chemical transformations in the region of interface and new compounds were not generated. The composites of PUR-NOP and vermiculite presented thermal insulating properties near the foam pure and percentage significantly less plastic in its composition, to the formulation with 10% of load

Estudo do aproveitamento de resíduo de gesso como carga para compósito com matriz de resina expansiva de mamona

In the execution of civil engineering works, either by wasting during the coating of wall or demolition of gypsum walls, the generation of the gypsum waste involves serious environmental concerns. These concerns are increased by the high demand of this raw material in the sector and by the difficulties of proper disposal byproduct generated. In the search for alternatives to minimize this problem, many research works are being conducted, giving emphasis in using gypsum waste as fillers in composites materials in order to improve the acoustic, thermal and mechanical performances. Through empirical testing, it was observed that the crystallization water contained in the residue (CaSO4.2H2O) could act like primary agent in the expanding of the polyurethane foam. Considering that polyurethane produced from vegetable oils are biodegradable synthetic polymers and that are admittedly to represent an alternative to petrochemical synthetic polyurethane, this research consist an analysis of the thermal behavior of a composite whose matrix obtained from a resin derived from the expansive castor oil seed, with loads of 4%, 8%, 12% and 16% of gypsum waste replacing to the polyol prepolymer blend. Contributors to this analysis: a characterization of the raw material through analysis of spectroscopy by Fourier transform infrared (FTIR), chemical analysis by X-Ray Fluorescence (XRF) and mineralogical analysis by X Ray Diffraction (XRD), complemented by thermo gravimetric analysis (TGA). In order to evaluate the thermo physical properties and thermal behavior of the composites manufactured in die closed with expansion contained, were also carried tests to determine the percentage of open pore volume using a gas pycnometer, scanning electronic microscopy (SEM), in addition to testing of flammability and the resistance to contact with hot surfaces. Through the analysis of the results, it appears that it is possible to produce a new material, which few changes in their thermo physical properties and thermal performance, promotes significant changes and attractive to the environment

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise