Coeficiente de cultivo e lâminas de irrigação do maracujazeiro amarelo nas condições semiáridas

The study aimed to determine the coefficient of the yellow passion fruit cultivation and irrigation set capable of increasing crop productivity and quality of production in the environmental conditions of the semi-arid region of Piauí. The experiment was conducted in the Pilot Project for Fruit Crops Irrigated area in Santa Rosa, PI. We used a randomized block design with six treatments and four replications. Treatments (irrigation) were defined according to percentages of reference evapotranspiration (ETo): T1 25%, T2: 50%, T3: 75%, T4: 100%; T5: T6 and 125%: 150%. For monitoring water in the soil profile was used tensiometers. To determine the crop coefficient (Kc) used the water balance in the soil treatment based on 100% replacement of water. Morphological and physiological characteristics of yellow passion fruit were evaluated. The maximum yield of 27.052 kg ha-1 yr-1 was obtained by applying a water depth of 763.80 mm. The values of average fruit weight ranged from 0.207 kg (T6) and 0.159 kg (T1). The average kc obtained for the vegetative stage was 0.57 to 0.94 and flowering stage to fruiting phase 1.04. The water depth of greater efficiency comprise in the range of 75% and 100% ETo.

Gestão energética nos setores transversais para redução do consumo de energia em uma empresa automobilística

Pós-graduação em Engenharia de Produção - FEG

Sperm head morphometry in ejaculates of adult marmosets (Callithrix jacchus): a model for studying sperm subpopulations and among-donor variations

In humans and other mammals, sperm morphology has been considered one of the most important predictive parameters of fertility. The objective was to determine the presence and distribution of sperm head morphometric subpopulations in a nonhuman primate model (Callithrix jacchus), using an objective computer analysis system and principal component analysis (PCA) methods to establish the relationship between the subpopulation distribution observed and among-donor variation. The PCA method revealed a stable number of principal components in all donors studied, that represented more than 85% of the cumulative variance in all cases. After cluster analysis, a variable number (from three to seven) sperm morphometric subpopulations were identified with defined sperm dimensions and shapes. There were differences in the distribution of the sperm morphometric subpopulations (P < 0.001) in all ejaculates among the four donors analyzed. In conclusion, in this study, computerized sperm analysis methods combined with PCA cluster analyses were useful to identify, classify, and characterize various head sperm morphometric subpopulations in nonhuman primates, yielding considerable biological information. In addition, because all individuals were kept in the same conditions, differences in the distribution of these subpopulations were not attributed to external or management factors. Finally, the substantial information derived from subpopulation analyses provided new and relevant biological knowledge which may have a practical use for future studies in human and nonhuman primate ejaculates, including identifying individuals more suitable for assisted reproductive technologies. (c) 2012 Elsevier Inc. All rights reserved.

Farm tourism: a cross-country empirical study in Germany and Italy

PROBLEM In the last few years farm tourism or agritourism as it is also referred to has enjoyed increasing success because of its generally acknowledged role as a promoter of economic and social development of rural areas. As a consequence, a plethora of studies have been dedicated to this tourist sector, focusing on a variety of issues. Nevertheless, despite the difficulties of many farmers to orient their business towards potential customers, the contribution of the marketing literature has been moderate. PURPOSE This dissertation builds upon studies which advocate the necessity of farm tourism to innovate itself according to the increasingly demanding needs of customers. Henceforth, the purpose of this dissertation is to critically evaluate the level of professionalism reached in the farm tourism market within a marketing approach. METHODOLOGY This dissertation is a cross-country perspective incorporating the marketing of farm tourism studied in Germany and Italy. Hence, the marketing channels of this tourist sector are examined both from the supply and the demand side by means of five exploratory studies. The data collection has been conducted in the timeframe of 2006 to 2009 in manifold ways (online survey, catalogues of industry associations, face-to-face interviews, etc.) according to the purpose of the research of each study project. The data have been analyzed using multivariate statistical analysis. FINDINGS A comprehensive literature review provides the state of the art of the main differences and similarities of farm tourism in the two countries of study. The main findings contained in the empirical chapters provide insights on many aspects of agritourism including how the expectations of farm operators and customers differ, which development scenarios of farm tourism are more likely to meet individuals’ needs, how new technologies can impact the demand for farm tourism, etc. ORIGINALITY/VALUE The value of this study is in the investigation of the process by which farmers’ participation in the development of this sector intersects with consumer consumption patterns. Focusing on this process should allow farm operators and others including related businesses to more efficiently allocate resources.

Politiche pubbliche per la stagionalità del turismo da una prospettiva territoriale. Casi di studio in Scozia e in Sardegna

Rita Cannas presents a PhD thesis in Economics (Geo-Economic curriculum) which is titled “Public Policies for Seasonality in Tourism from a Territorial Perspective. Case Studies in Scotland and Sardinia”. The specific area of the research is public policies for contrasting seasonality in tourism in peripheral areas. Seasonality has seen such as a problem in terms of social and economics patterns especially for those local communities which are situated in peripheral areas. The research explores what, how and for who, public policies, that have been in place in Scotland and Sardinia over the last 10-5 years, are working and what kind of results these have produced. The research has empirical and theoretical implications for studying tourism seasonality. It aims to highlight the local supply patterns of the phenomenon investigated, and to improve knowledge about the strategies and the policies that have been adopted in the two territorial contexts (Scotland and Sardinia) for contrasting or modifying seasonality in tourism. The type of subject and the research questions have suggested the adoption of an interpretative theoretical perspective and a qualitative methodological approach, although a set of quantitative secondary data is also required for understanding main tourism's characteristics and for analyzing the specificity of seasonality. Interview with key actors of the local system in Scotland and Sardinia is the method chosen to collect primary data. In total the researcher has done 20 interviews in deep. Case studies are chosen both as unity of analysis and research strategy. The main findings of the research show a different and complex scenario about quality and quantity of public policies and strategies in tourism in the two case studies. The role of local resources is quite strategic on delivering tourism services and on counteracting seasonality. Events, festival are the main demand-side strategies. From a supply-side the principles policies are focused on quality of services, technology, high skills, sustainability. Partnership between public and private sector seems to be a fundamental way to work in order to attain changes and outcomes. The research has a strong research design, provides coherent results, and it has been done paying attention to the validation of the whole process.

Development of An Energy Modeling Approach to Analyse Historical Building Performance

In the last years the attentions on the energy efficiency on historical buildings grows, as different research project took place across Europe. The attention on combining, the need of the preservation of the buildings, their value and their characteristic, with the need of the reduction of energy consumption and the improvements of indoor comfort condition, stimulate the discussion of two points of view that are usually in contradiction, buildings engineer and Conservation Institution. The results are surprising because a common field is growing while remains the need of balancing the respective exigencies. From these experience results clear that many questions should be answered also from the building physicist regarding the correct assessment: on the energy consumption of this class of buildings, on the effectiveness of the measures that could be adopted, and much more. This thesis gives a contribution to answer to these questions developing a procedure to analyse the historic building. The procedure gives a guideline of the energy audit for the historical building considering the experimental activities to dial with the uncertainty of the estimation of the energy balance. It offers a procedure to simulate the energy balance of building with a validated dynamic model considering also a calibration procedure to increase the accuracy of the model. An approach of design of energy efficiency measures through an optimization that consider different aspect is also presented. All the process is applied to a real case study to give to the reader a practical understanding.

Fingerprints of changes in the terrestrial carbon cycle in response to large reorganizations in ocean circulation

CO2 and carbon cycle changes in the land, ocean and atmosphere are investigated using the comprehensive carbon cycle-climate model NCAR CSM1.4-carbon. Ensemble simulations are forced with freshwater perturbations applied at the North Atlantic and Southern Ocean deep water formation sites under pre-industrial climate conditions. As a result, the Atlantic Meridional Overturning Circulation reduces in each experiment to varying degrees. The physical climate fields show changes qualitatively in agreement with results documented in the literature, but there is a clear distinction between northern and southern perturbations. Changes in the physical variables, in turn, affect the land and ocean biogeochemical cycles and cause a reduction, or an increase, in the atmospheric CO2 concentration by up to 20 ppmv, depending on the location of the perturbation. In the case of a North Atlantic perturbation, the land biosphere reacts with a strong reduction in carbon stocks in some tropical locations and in high northern latitudes. In contrast, land carbon stocks tend to increase in response to a southern perturbation. The ocean is generally a sink of carbon although large reorganizations occur throughout various basins. The response of the land biosphere is strongest in the tropical regions due to a shift of the Intertropical Convergence Zone. The carbon fingerprints of this shift, either to the south or to the north depending on where the freshwater is applied, can be found most clearly in South America. For this reason, a compilation of various paleoclimate proxy records of Younger Dryas precipitation changes are compared with our model results. The proxy records, in general, show good agreement with the model's response to a North Atlantic freshwater perturbation.

Integrated solar energy and absorption cooling model for HVAC (heating, ventilating, and air conditioning) applications in buildings

The demands in production and associate costs at power generation through non renewable resources are increasing at an alarming rate. Solar energy is one of the renewable resource that has the potential to minimize this increase. Utilization of solar energy have been concentrated mainly on heating application. The use of solar energy in cooling systems in building would benefit greatly achieving the goal of non-renewable energy minimization. The approaches of solar energy heating system research done by initiation such as University of Wisconsin at Madison and building heat flow model research conducted by Oklahoma State University can be used to develop and optimize solar cooling building system. The research uses two approaches to develop a Graphical User Interface (GUI) software for an integrated solar absorption cooling building model, which is capable of simulating and optimizing the absorption cooling system using solar energy as the main energy source to drive the cycle. The software was then put through a number of litmus test to verify its integrity. The litmus test was conducted on various building cooling system data sets of similar applications around the world. The output obtained from the software developed were identical with established experimental results from the data sets used. Software developed by other research are catered for advanced users. The software developed by this research is not only reliable in its code integrity but also through its integrated approach which is catered for new entry users. Hence, this dissertation aims to correctly model a complete building with the absorption cooling system in appropriate climate as a cost effective alternative to conventional vapor compression system.

Analysis of spring break-up and its effects on a biomass feedstock supply chain in northern Michigan

Demand for bio-fuels is expected to increase, due to rising prices of fossil fuels and concerns over greenhouse gas emissions and energy security. The overall cost of biomass energy generation is primarily related to biomass harvesting activity, transportation, and storage. With a commercial-scale cellulosic ethanol processing facility in Kinross Township of Chippewa County, Michigan about to be built, models including a simulation model and an optimization model have been developed to provide decision support for the facility. Both models track cost, emissions and energy consumption. While the optimization model provides guidance for a long-term strategic plan, the simulation model aims to present detailed output for specified operational scenarios over an annual period. Most importantly, the simulation model considers the uncertainty of spring break-up timing, i.e., seasonal road restrictions. Spring break-up timing is important because it will impact the feasibility of harvesting activity and the time duration of transportation restrictions, which significantly changes the availability of feedstock for the processing facility. This thesis focuses on the statistical model of spring break-up used in the simulation model. Spring break-up timing depends on various factors, including temperature, road conditions and soil type, as well as individual decision making processes at the county level. The spring break-up model, based on the historical spring break-up data from 27 counties over the period of 2002-2010, starts by specifying the probability distribution of a particular county’s spring break-up start day and end day, and then relates the spring break-up timing of the other counties in the harvesting zone to the first county. In order to estimate the dependence relationship between counties, regression analyses, including standard linear regression and reduced major axis regression, are conducted. Using realizations (scenarios) of spring break-up generated by the statistical spring breakup model, the simulation model is able to probabilistically evaluate different harvesting and transportation plans to help the bio-fuel facility select the most effective strategy. For early spring break-up, which usually indicates a longer than average break-up period, more log storage is required, total cost increases, and the probability of plant closure increases. The risk of plant closure may be partially offset through increased use of rail transportation, which is not subject to spring break-up restrictions. However, rail availability and rail yard storage may then become limiting factors in the supply chain. Rail use will impact total cost, energy consumption, system-wide CO2 emissions, and the reliability of providing feedstock to the bio-fuel processing facility.

Computational simulations of latent heat thermal energy storage systems - with innovative and first-principles based simulation for the underlying unsteady melting (and solidification) processes

This thesis develops an effective modeling and simulation procedure for a specific thermal energy storage system commonly used and recommended for various applications (such as an auxiliary energy storage system for solar heating based Rankine cycle power plant). This thermal energy storage system transfers heat from a hot fluid (termed as heat transfer fluid - HTF) flowing in a tube to the surrounding phase change material (PCM). Through unsteady melting or freezing process, the PCM absorbs or releases thermal energy in the form of latent heat. Both scientific and engineering information is obtained by the proposed first-principle based modeling and simulation procedure. On the scientific side, the approach accurately tracks the moving melt-front (modeled as a sharp liquid-solid interface) and provides all necessary information about the time-varying heat-flow rates, temperature profiles, stored thermal energy, etc. On the engineering side, the proposed approach is unique in its ability to accurately solve – both individually and collectively – all the conjugate unsteady heat transfer problems for each of the components of the thermal storage system. This yields critical system level information on the various time-varying effectiveness and efficiency parameters for the thermal storage system.

Business and Public–Private Partnerships for Sustainability: Beyond Corporate Social Responsibility?

This article analyses public–private partnerships (PPPs) in the field of sustainable development from an international relations perspective with insights from the business and ethics literature. We argue that the role of business in these types of arrangements has not been sufficiently explored. After presenting three ways of approaching PPPs to stress the many facets of partnerships across the public–private divide, we discuss the emergence of these novel forms of governance from a demand side and contrast such a functionalist reading with the supply side. Then we look at the micro-economic incentives for corporations to engage in such endeavours. We develop arguments derived from the dominant literature to provide an analytical framework for explaining business participation. Finally, we discuss the role of PPPs in light of input and output legitimacy. We conclude by alluding to the emergence of an expectation-capacity gap and normative issues related to the global PPP architecture.

Populist Communication in the Context of European Parliament Elections 2014

Over the last decade European democracies have been facing a challenge by the rising force of new populist movements. The emergence of the financial and sovereign debt crisis in Europe created new fertile soil for the strengthening of old-established – and the development of new – populist parties in several EU-member states. José Manuel Barroso, president of the European Commission, emphasized his increased unease concerning these developments when he was speaking at the annual Brussels Think Tank Forum on 22. April 2013: “I am deeply concerned about the divisions that we see emerging: political extremes and populism tearing apart the political support and the social fabric that we need to deal with the crisis; […]” (Barroso 2013). Indeed, European elites seem to be increasingly worried by these recent developments which are perceived as an impending stress test of the Union and the project of European integration as a whole (Hartleb 2013). Sure enough, the results of the recent European Parliament Elections 2014 revealed a great support for populist political parties in many societies of EU-member countries. To understand the success of populist parties in Europe it is crucial to first shed light on the nature of populist party communication itself. Significant communicative differences may explain the varying success of populist parties between and within countries, while a pure demand-side approach (i.e. a focus on the preferences of the electorate) often fails to do so (Mudde 2010). The aim of this study is therefore to analyse what different types of populist communication styles emerge during the EP election campaign 2014 and under which conditions populist communication styles are selected by political parties. So far, the empirical measurement of populism has received only scarce attention (Rooduijn & Pauwels 2011). Besides, most of the existing empirical investigations of populism are single case studies (Albertazzi & McDonnell 2008) and scholars have not yet developed systematic methods to measure populism in a comparative way (Rooduijn & Pauwels 2011). This is a consequence of a lack of conceptual clarity which goes along with populism (Taggart 2000; Barr 2009; Canovan 1999) due to its contextual sensitivity. Hence, populism in Europe should be analysed in a way that clarifies the concept of populism and moreover takes into account that the Europeanization of politics has an influence on the type of populist party communication, which is intended in the course of that study.

Labour Market Prospects of Swiss Career Entrants after Completion of Vocational Education and Training

This study seeks to find the reasons for the rising risk of unemployment for people who have completed basic vocational education and training (VET) in Switzerland. We focus on the long-term structural shift on the demand side of the labour market and its consequences for new entrants? chances of employment in the labour force. A detailed analysis of the development of vacancies for such ?career entrants? in the time period 2001 to 2011 suggests that neither a growing occupational mismatch nor a general shift in the level of education to the disadvantage of workers with vocational education can be made responsible for the rising unemployment of labour market entrants. Instead, the available evidence indicates that a diminishing part of the vacancies suited for VET graduates remains open to entrants because of the increasing job requirements with regard to work experience and further education. Basic vocational education and training alone is increasingly less a guarantee for a smooth entry into the working world.