Plane strain problem of growing crack for a perfectly plastic solid

In this paper, fundamental equations of the plane strain problem based on the 3-dimensional plastic flow theory are presented for a perfectly-plastic solid The complete governing equations for the growing crack problem are developed. The formulae for determining the velocity field are derived.The asymptotic equation consists of the premise equation and the zero-order governing equation. It is proved that the Prandtl centered-fan sector satisfies asymptotic equation but does not meet the needs of hlgher-order governing equations.

Aquaculture Asia, Vol. 8, No. 2, pp.1-47, April-June 2003

*Table of Contents* Sustainable Aquaculture Peter Edwards writes on rural aquaculture: Peri-urban aquaculture in Kolkata A case of informal shrimp farmers association and its role in sustainable shrimp farming in Tamil Nadu, India M. Kumaran, N. Kalaimani, K. Ponnusamy, V.S. Chandrasekaran, D. Deboral Vimala Diffusion and adoption of shrimp farming technologies M. Kumaran, K. Ponnusamy and N. Kalaimani Farmers as Scientists: Aquaculture education in India - opportunities for global partnership M.C. Nandeesha Information system of fish germplasm resources in China Yang Ningsheng, Ge Chanshui, Ouyang Haiying, Yuan Yongming Status and development needs of freshwater crustacean aquaculture in China Xu Pao Research and Farming Techniques Aquaculture fundamentals: Getting the most out of your feed Part II: The role of macronutrients Simon Wilkinson Fish breeding in captivity - some innovative adaptations of technology by Bengal farmers N.R. Chattopadhyay Scientific guidelines for farmers engaged in freshwater prawn farming in India Vishal Saxena Marine Finfish Section News and publications Status and development of mariculture in Indonesia Ketut Sugama Aquatic Animal Health Use of probiotics in larval rearing of new candidate species Rehana Abidi Advice on aquatic animal health care: Problems in shrimp culture during the wet season (Thai/English languages) Pornlerd Chanratchakool

Encouraging them to come to us: changing the way that information is made available to farmers

Recommendations for changes to service provision and fisheries policy in support of poverty alleviation emerged recently in India from a process know as facilitated advocacy (see Case Study SI 2) that helped to negotiate and support a role for poor people and their service providers, to contribute to changes in services and policies. Two of the key recommendations to emerge from farmers and fishers, which were prioritized by Fisheries Departments, were to change the way that information is made available and to simplify procedures for accessing government schemes and bank loans. This case which identifies the origin of these recommendations to change the way that information is made available, shows how different models of the concept have emerged, and follows the development of the One-stop Aqua Shops (OAS) in the eastern Indian states of Jharkhand, Orissa and West Bengal, that represent a new and vital tier in communications in aquaculture. (12 p.)

Facilitated advocacy: supporting farmers to have a voice in policy making and the development of service provision

Listening to people, especially those who are poor, and involving them in policy making and decisions about service delivery processes are logical steps in building better services and improving policies aimed at poverty alleviation. This case describes a facilitated advocacy that helped to negotiate and support a role for poor people who farm and fish, to contribute recommendations for changes in services and policies that impact on their lives. The national Government of India’s Department of Animal Husbandry and Dairying and the Indian Council for Agricultural Research, both in the capital Delhi, have been linking with farmers and fishers and state government officials in the eastern states of Jharkhand, Orissa and West Bengal, in partnership with the STREAM Initiative of the intergovernmental Network of Aquaculture Centers in Asia Pacific and with the support of the UK Government Department for International Development, Natural resources Systems Program supporting farmers to have a voice(13 p.)

Helping ourselves: the role of self-help groups in poverty alleviation through aquaculture

Self-help groups (SHGs) are ways for farmers and fishers, especially those who are poor, to come together and work together. They can be a useful entry point for outsiders, promote a supportive local environment, strengthen voices in decision-making and in negotiations with more powerful forces, increase the effectiveness of local actions, and provide easier access to micro-credit and other resources and services. This case study describes a rural aquaculture development context, in India, the development of SHGs and the concept of a ‘one-stop aqua shop’, set up and run by a federation of self-help groups in Kaipara village, West Bengal (a pilot state along with Jharkhand and Orissa). It outlines testing new ways to share information, as part of a series of revised procedures and institutional arrangements for service delivery recommended by farmers and fishers and prioritized by government, with support from the Department of International Development, London (DFID) Natural Resources Support Programme (NRSP) and the Network of Aquaculture Centres in Asia-Pacific (NACA) to the Support to Regional Aquatic Resources Management (STREAM) Initiative (10 p.)

STREAM Journal, Vol. 2, No. 4, pp 1-18. October-December 2003

CONTENTS: An experience with group formation in Jabarrah, West Bengal, by Amar Prasad, Virendra Singh, Binay Sahay and Gautum Dutta. Aquaculture self-help groups in rural West Bengal, by Satyendra Tripathi, Graham Haylor and William Savage in consultation with Jagdish Gangwar, Virendra Singh, Gautam Dutta and Prabhat Pathak. Lessons learned for Fulwar Toli from an exposure visit to Jabarrah Bhim Nayak and Rubu Mukherjee. Livelihood intervention by Fish Farmers Development Agency: a success story from Mayurbhanj, Orissa, by G.B. Parida. Understanding of assets-based livelihoods through participatory rural appraisal to eliminate hunger, by Binay Sahay. Poverty ranking tools in PRA: experiences of EIRFP in addressing vulnerability, by Binay Sahay.

Statistical Simulation of Thin-Film Bearings

The information preservation (IP) method and the direct simulation Monte Carlo (DSMC) method are used to simulate the gas flows between the write/read head and the platter of the disk drive (the slider bearing problem). The results of both methods are in good agreement with numerical solution of the Reynolds equation in the cases studied. However, the DSMC method owing to the problem of large sample size demand and the difficulty in regulating boundary conditions at the inlet and outlet was able to simulate only short bearings, while IP simulates the bearing of authentic length ~1000 m ? and can provide more detailed flow information.

Performance of a Supersonic Model Combustor using Vaporized Kerosene Injection

Characteristics of supersonic combustion by injecting kerosene vapor into a Mach 2.5 crossflow at various preheat temperatures and pressures were investigated experimentally. A two-stage heating system has been designed and tested, which can prepare heated kerosene of 0.8 kg up to 820 K at pressure of 5.5 Mpa with minimum/negligible fuel coking. In order to simulate the thermophysical properties of kerosene over a wide range of thermodynamic conditions, a three-component surrogate that matches the compound class of the parent fuel was employed. The flow rate of kerosene vapor was calibrated using a sonic nozzle. Computed flow rates using the surrogate fuel are in agreement with the experimental data. Kerosene jets at various preheat temperatures injecting into both quiescent environment and Mach 2.5 crossflow were visualized. It was found that at injection pressure of 4 Mpa and preheat temperature of 550 K the kerosene jet was completely in vapor phase, while keeping almost the same penetration depth as compared to the liquid kerosene injection. Supersonic combustion tests were also carried out to compare the combustor performance for the cases of vaporized kerosene injection, liquid kerosene injection, and effervescent atomization with hydrogen barbotage, under the similar stagnation conditions. Experimental results demonstrated that the use of vaporized kerosene injection leads to better combustor performance. Further parametric study on vaporized kerosene injection in a supersonic model combustor is needed to assess the combustion efficiency as well as to identify the controlling mechanism for the overall combustion enhancement.

Numerical Partition of Energy Absorption of Foam-filled Top-Hat and Double-Hat Sections

The interaction effect, i.e., the contribution of each component to the total energy absorption of an axially crushed foam-filled hat section was investigated quantitatively via numerical simulation. The FE results were first verified by experimental work of aluminum foam-filled top-hat and double-hat sections, then the contribution of foam-fillers and that of hat sections to the overall energy absorption were quantitatively obtained, respectively. When foam-filled, increase in energy absorption was found both in hat section component and foam-filler component, whereas the latter contributes predominantly to the interaction effect.