Energy harvesting performance of piezoelectric electrospun polymer fibers and polymer/ceramic composites

The energy harvesting efficiency of electrospun poly(vinylidene fluoride), its copolymer vinylidene fluoride-trifluoroethylene and composites of the later with piezoelectric BaTiOon interdigitated electrodes has been investigated. Further, a study of the influence of the electrospinning processing parameters on the size and distribution of the composites fibers has been performed. It is found that the best energy harvesting performance is obtained for the pure poly(vinylidene fluoride) fibers, with power outputs up to 0.03 W and 25 W under low and high mechanical deformation. The copolymer and the composites show reduced power output due to increased mechanical stiffness. The obtained values, among the largest found in the literature, the easy processing and the low cost and robustness of the polymer, demonstrate the applicability of the developed system.

Thermal degradation of Pb(Zr0.53Ti0.47)O3/poly(vinylidene fluoride) composites as a function of ceramic grain size and concentration

Poly(vinylidene fluoride)/Pb(Zr0.53Ti0.47)O3,([PVDF]1−x/[PZT]x) composites of volume fractions x and (0–3) type connectivity were prepared in the form of thin films. PZT powders with average grain sizes of 0.2, 0.84, and 2.35 μm in different volume fraction of PZT up to 40 % were mixed with the polymeric matrix. The influence of the inorganic particle size and its content on the thermal degradation properties of the composites was then investigated by means of thermo-gravimetric analysis. It is observed that filler size affects more than filler concentration the degradation temperature and activation energy of the polymer. In the same way and due to their larger specific area, smaller particles leave larger solid residuals after the polymer degradation. The polymer degradation mechanism is not significantly modified by the presence of the inorganic fillers. On the other hand, an inhibition effect occurs due to the presence of the fillers, affecting particularly the activation energy of the process.

Optimização de um método de avaliação simultânea da dissolução e permeabilidade de fármacos

Englobado na temática do desenvolvimento de métodos in vitro para avaliação da biodisponibilidade de fármacos, este trabalho de investigação teve como objectivo a optimização de um método para avaliar em simultâneo a dissolução e permeabilidade de fármacos usando uma célula de fluxo bilateral com membranas de Polyvinylidene Fluoride (PVDF). Através de uma avaliação inicial, na qual se testou o efeito de diversas variáveis na permeabilidade da cafeína e do ácido acetilsalicílico, obtiveram-se resultados que permitiram concluir que os ensaios realizados são mais reprodutíveis, quando a célula de fluxo é utilizada em circulação unilateral no lado dador e com agitação do lado aceitador. Observou-se ainda que o método permite detectar a influência do pH (Papp da cafeína a pH 7,4 e 4,5: 4,84±1,57x105cm.s-1 e 6,00±0,70x105cm.s app do ácido acetilsalicílico a pH 7,4 e 4,5: 3,85±0,38x10-5cm.s-1 e 5,1 1±0,65x105cm.s-1) e dos excipientes (Papp da cafeína isoladamente e em presença de excipientes: 6,76±1,22 x 10-5cm.s1 e 5,84±0,43x10-5cm.s-1 app do ácido acetilsalicílico isoladamente e em presença de excipientes: 7,07±1,56x105 cm.s e 5,19±0,23x10-5cm.s1) na permeabilidade dos compostos. Na avaliação da dissolução testou-se um método descrito na United States Pharmacopeia (USP) com meio de dissolução a pH 4,5 e um método com meio de dissolução a pH 7,4 pois na perspectiva de no futuro se realizarem ensaios com membranas celulares Caco-2, foi necessário testar um meio compatível com estas. As percentagens de dissolução dos ensaios a pH 7,4 foram de 96,3% para a cafeína e de 87,1% para o ácido acetilsalicílico, o que permitiu a utilização deste meio, visto ter sido superior ao limite mínimo de 80% estabelecido pela USP. Após estabelecimento das metodologias de dissolução e permeabilidade individuais, passou-se ao acoplamento das duas técnicas, tendo sido realizados ensaios de dissolução/permeabilidade com uma forma farmacêutica contendo os dois compostos em estudo (Melhoral®), nos quais se obtiveram permeabilidades aparentes de 3,97±0,37x105cm.s1 e 3,69±0,29 x105cm.s para a cafeína e ácido acetilsalicílico a pH 4,5 e de 3,77±0,40x105cm.s e 4,08± 0,04x1 05cm.s1 para a cafeína e ácido acetilsalicílico a pH 7,4, resultados estes que foram reprodutíveis e descriminativos e que perspectivam a possibilidade da utilização do sistema para futuros trabalhos envolvendo membranas de culturas celulares (Caco-2) ou tecidos (pele ou intestino).

Estudos de absorção de CO2 com soluções aminadas

A absorção química de dióxido de carbono (CO2) através de soluções aquosas de aminas tem sido estudada nos últimos anos devido à preocupação ambiental face ao aquecimento global. Nestes estudos, foram tidos como principais objectivos a realização de ensaios preliminares de absorção e desabsorção de CO2 em soluções aquosas de aminas bem como a construção de uma instalação piloto para a mesma finalidade. Inicialmente, a nível laboratorial, procedeu-se à absorção de CO2 através de soluções aquosas de aminas. As aminas utilizadas nestes estudos foram a monoetanolamina (MEA), etilenodiamina (EDA), 1,6- hexanodiamina (HDA) e piperazina anidra (PZ). A absorção de CO2 através destas aminas foi realizada experimentalmente às condições normais de pressão e temperatura. A concentração das soluções aquosas foi de 20% em massa de cada amina. Foram também realizados estudos de regeneração das soluções aquosas de aminas saturadas de CO2 em banho de glicerina, para determinar as condições de regeneração. Para além disso, observou-se o estado físico das aminas no estado puro até saturação com CO2 para garantir a não ocorrência de danos a nível de entupimento numa posterior utilização na instalação piloto. Por fim, voltaram-se a repetir todos estes ensaios experimentais utilizando-se, em vez da água destilada, um solvente polar aprótico, dimetilsulfóxido (DMSO). Numa segunda fase destes estudos, a absorção de CO2 através de soluções aquosas de aminas foi investigada experimentalmente numa instalação piloto. O objectivo era utilizar nesta fase do estudo as mesmas aminas utilizadas nos ensaios preliminares mas uma vez que não se dispunha das quantidades necessárias de aminas e para a sua aquisição teria que se despender bastante tempo e dinheiro, utilizaram-se duas soluções aquosas de alcanolaminas. As alcanolaminas utilizadas no presente estudo foram a amina secundária dietanolamina (DEA) e a amina terciária N-metildietanolamina (MDEA), duas aminas amplamente utilizadas nas indústrias químicas e petroquímicas para a purificação dos gases de combustão. A absorção de CO2 através destas duas alcanolaminas foi realizada experimentalmente às condições normais de pressão e temperatura. As concentrações das soluções aquosas foram de (10, 20 e 30) % em massa de MDEA e de DEA. O processo de adição de cloreto de bário (BaCl2.2H2O) às alcanolaminas ajuda à formação de carbonato de bário, quando o CO2 passa através da solução de alcanolamina. A quantidade de carbonato de bário formado foi utilizado para determinar a solubilidade do CO2 (mol CO2/mol alcanolamina). O principal desafio na captura de CO2 dos gases de combustão é o de reduzir o consumo de energia necessária para a regeneração do solvente. Deste modo, foram também realizados estudos de regeneração das soluções de alcanolaminas saturadas, para determinar as condições de regeneração. Os resultados obtidos, a nível laboratorial, revelaram que uma amina secundária (PZ) e uma amina primária de cadeia longa (HDA) são mais favoráveis ao processo de absorção e regeneração de CO2. No entanto, e devido a essa mesma estrutura molecular, necessitam de maiores valores de temperaturas para desabsorver o CO2. Garantiu-se poder trabalhar com as quatro aminas no estado puro em estudos futuros, na instalação piloto, garantindo que não ocorrerão danos a nível de entupimento. Relativamente ao solvente utilizado concluiu-se que um solvente polar aprótico não é um solvente favorável para estes estudos. Os resultados obtidos, na instalação piloto, revelaram que a amina terciária, MDEA, consegue absorver maiores quantidades de CO2 do que a amina secundária, EDA, bem como é a mais fácil de regenerar com menor perda de capacidade de absorção do que a EDA.

Avaliação de fluoretos na água de consumo do concelho da Praia da Vitória (Ilha Terceira, Açores) e suas consequências a nível da saúde pública

Dissertação de Mestrado, Engenharia e Gestão de Sistemas de Água, 25 de Junho de 2014, Universidade dos Açores.

Regulation of antioxidant enzymes gene expression in the yeast Saccharomyces cerevisiae during stationary phase

Gene expression of three antioxidant enzymes, Mn superoxide dismutase (MnSOD), Cu,Zn superoxide dismutase (Cu,ZnSOD), and glutathione reductase (GR) was investigated in stationary phase Saccharomyces cerevisiae during menadione-induced oxidative stress. Both GR and Cu,ZnSOD mRNA steady state levels increased, reaching a plateau at about 90 min exposure to menadione. GR mRNA induction was higher than that of Cu,ZnSOD (about 14-fold and 9-fold after 90 min, respectively). A different pattern of response was obtained for MnSOD mRNA, with a peak at about 15 min (about 8-fold higher) followed by a decrease to a plateau approximately 4-fold higher than the control value. However, these increased mRNA levels did not result in increased protein levels and activities of these enzymes. Furthermore, exposure to menadione decreased MnSOD activity to half its value, indicating that the enzyme is partially inactivated due to oxidative damage. Cu,ZnSOD protein levels were increased 2-fold, but MnSOD protein levels were unchanged after exposure to menadione in the presence of the proteolysis inhibitor phenylmethylsulfonyl fluoride. These results indicate that the rates of Cu,ZnSOD synthesis and proteolysis are increased, while the rates of MnSOD synthesis and proteolysis are unchanged by exposure to menadione. Also, the translational efficiency for both enzymes is probably decreased, since increases in protein levels when proteolysis is inhibited do not reflect the increases in mRNA levels. Our results indicate that oxidative stress modifies MnSOD, Cu,ZnSOD, and GR gene expression in a complex way, not only at the transcription level but also at the post-transcriptional, translational, and post-translational levels.

Beliefs and attitudes about endemic dental fluorosis among adolescents in rural Brazil

OBJECTIVE: To understand beliefs and attitudes about fluorosis among young people living in a rural area. METHODOLOGICAL PROCEDURES: Qualitative study consisting of semi-structured interviews with 23 adolescents with dental fluorosis, 14 teachers and three health authorities in the city of São Francisco, Southeastern Brazil, in 2002. Content analysis and social representation theory were applied. ANALYSIS OF RESULTS: The organoleptic characteristics of carbonates that affect groundwater (salty flavor, whitish coloration, and turbidity) associated with negative aspects of household use of this water are considered a cause of mottled enamel. Even after contact with researchers who investigated this phenomenon and helped find a solution for this condition, the local population is still unwilling to accept fluoride as the cause of the problem and does not fully agree to use water from other sources because they are afraid of the quality of water. CONCLUSIONS: Misperceptions of the causes of dental fluorosis and water treatment costs compromise the implementation of uncontaminated surface water supplies. Health education strategies are required in parallel with solutions for securing water supply in drought-ravaged areas.

Construction and evaluation of cysteine selective electrodes for FIA analysis of pharmaceuticals

A flow injection analysis (FIA) system comprising a cysteine selective electrode as detection system was developed for determination of this amino acid in pharmaceuticals. Several electrodes were constructed for this purpose, having PVC membranes with different ionic exchangers and mediator solvents. Better working characteristics were attained with membranes comprising o-nitrophenyl octyl ether as mediator solvent and a tetraphenylborate based ionic-sensor. Injection of 500 µL standard solutions into an ionic strength adjuster carrier (3x10-3 M) of barium chloride flowing at 2.4mL min-1, showed linearity ranges from 5.0x10-5 to 5.0x10-3 M, with slopes of 76.4±0.6mV decade-1 and R2>0.9935. Slope decreased significantly under the requirement of a pH adjustment, selected at 4.5. Interference of several compounds (sodium, potassium, magnesium, barium, glucose, fructose, and sucrose) was estimated by potentiometric selectivity coefficients and considered negligible. Analysis of real samples were performed and considered accurate, with a relative error to an independent method of +2.7%.

Molecularly-imprinted materials for potentiometric transduction: application to the antibiotic enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mVΔlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL 1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ±0.7%), fast response, good sensitivity (47 mV/Dlog([ENR]/ M), wide linear range (1.0×10-5–1.0×10-3 M), low detection limit (0.9 µg mL-1), and a stable baseline for a 5×10-2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.

Effectiveness of motivational interviewing at improving oral health: a systematic review

OBJECTIVE : To analyze the effectiveness of motivational interviewing (MI) at improving oral health behaviors (oral hygiene habits, sugar consumption, dental services utilization or use of fluoride) and dental clinical outcomes (dental plaque, dental caries and periodontal status). METHODS : A systematic search of PubMed, LILACS, SciELO, PsyINFO, Cochrane and Google Scholar bibliographic databases was conducted looking for intervention studies that investigated MI as the main approach to improving the oral health outcomes investigated. RESULTS : Of the 78 articles found, ten met the inclusion criteria, all based on randomized controlled trials. Most studies (n = 8) assessed multiple outcomes. Five interventions assessed the impact of MI on oral health behaviors and nine on clinical outcomes (three on dental caries, six on dental plaque, four on gingivitis and three on periodontal pockets). Better quality of evidence was provided by studies that investigated dental caries, which also had the largest population samples. The evidence of the effect of MI on improving oral health outcomes is conflicting. Four studies reported positive effects of MI on oral health outcomes whereas another four showed null effect. In two interventions, the actual difference between groups was not reported or able to be recalculated. CONCLUSIONS : We found inconclusive effectiveness for most oral health outcomes. We need more and better designed and reported interventions to fully assess the impact of MI on oral health and understand the appropriate dosage for the counseling interventions.

Gastric acid secretion response in the Cebus apella: a monkey model of chronic Chagas disease

The objective was to study the secretory pattern, both basal and stimulated either by histamine (0.1 mg/kg) or pentagastrin (64 ug/kg) in eighteen Cebus apella monkeys chronically infected with different T. cruzi strains (CA1, n=10; Colombian, n=4 and Tulahuen, n=4) and to describe the morphological findings in the gastrointestinal tract in twelve infected (6 sacrificed and 6 spontaneously dead) and four healthy monkeys. All infected monkeys and 35 healthy ones were evaluated by contrast X-ray examination. No differences were observed in basal acid output between control and infected groups. Animals infected with the Tulahuen and Colombian strains showed significant lower values of peak acid output in response to histamine or pentagastrin (p<0.01 and p<0.05 respectively; "t" test) in comparison to the controls. Barium contrast studies showed enlargement and dilatation of the colon in three infected animals. Histopathological lesions were seen in 75% of the autopsied animals either in colon alone (33%) or both, in colon and esophagus (42%). The normal secretion observed in the CA1 infected group could be due to a lower virulence of the strain, a lower esophagic tropism or the necessity of a longer post-infection time to cause lesions.

Desenvolvimento de métodos de análise físico-química em águas usando um analisador multiparamétrico AQUAKEM

Trabalho Final de mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica

Evolução hidrogeoquímica das águas sulfúreas de Entre-os-Rios: avaliação preliminar

O principal objectivo desta dissertação foi avaliar a evolução hidrogeoquímica das águas minerais de Entre‐os‐Rios, para uma melhor compreensão do modelo hidrogeológico conceptual deste sistema hidromineral. Desta forma, foram coligidos diversos dados hidroquímicos, quer das nascentes clássicas (Torre, Curveira, Ardias, Arcos Esquerda e Arcos Direita), quer do furo Barbeitos. Foram compiladas e analisadas oitenta análises hidroquímicas no período 1938‐2012, incluindo características organolépticas (cheiro, cor e turbidez), diversas propriedades físico-químicas (temperatura, pH, condutividade eléctrica, sulfuração, etc), os principais catiões e aniões (bicarbonato, fluoreto, sódio, lítio, etc) e os elementos vestigiários (chumbo, tungsténio, boro, etc). Além disso, foram integrados os dados históricos disponíveis de finais do século XIX e inícios do século XX. Foram igualmente reunidos e discutidos alguns dados isotópicos (oxigénio‐18, deutério e trítio). O recurso hidromineral de Entre‐os‐Rios está condicionado pela litologia e pelas condições tectónicas. As análises químicas revelaram que as águas minerais de Entre‐os‐Rios apresentam uma estabilidade química nos últimos 100 anos. Estas águas são orto‐ a hipertermais, fracamente mineralizadas, de reacção alcalina, sulfídricas, bicarbonatadas sódicas, carbonatadas e muito fluoretadas. Estas características são claramente distintas das águas normais da região. As águas de Entre‐os‐Rios são muito semelhantes às águas minerais de S. Vicente e, em diversos parâmetros, bastante diferentes das águas minerais das Caldas da Saúde. Os dados isotópicos permitiram concluir que as águas de Entre‐os‐Rios têm uma origem meteórica, com um tempo de residência longo no sistema aquífero, e que são, muito provavelmente, submodernas, com uma recarga anterior a 1952. Na região de Entre‐os‐Rios coexistem três sistemas aquíferos, um sistema granítico superficial, livre e um sistema livre a semi‐confinado, ambos com circulação de águas normais, e um sistema aquífero granítico, profundo, confinado, com circulação de água mineral.

Sulphonamide-imprinted sol–gel materials as ionophores in potentiometric transduction

This work proposes different kind of solid-contact graphite-based electrodes for the selective determination of sulphonamides (SPHs) in pharmaceuticals, biological fluids and aquaculture waters. Sulfadiazine (SDZ) and sulfamethoxazole (SMX) were selected for this purpose for being the most representative compounds of this group. The template molecules were imprinted in sol–gel (ISG) and the resulting material was used as detecting element. This was made by employing it as either a sensing layer or an ionophore of PVC-based membranes and subsequent potentiometric transduction, a strategy never reported before. The corresponding non-imprinted sol–gel (NISG) membranes were used as blank. The effect of plasticizer and kind/charge of ionic lipophilic additive was also studied. The best performance in terms of slope, linearity ranges and signal reproducibility and repeatability was achieved by PVC membranes including a high dielectric constant plasticizer and 15 mg of ISG particles. The corresponding average slope was −51.4 and −52.4 mV/decade, linear responses were 9.0 × 10−6 and 1.7 × 10−5 M, and limits of detection were 0.74 and 1.3 μg/mL for SDZ and for SMX, respectively. Good selectivity with log Kpot < −0.3 was observed for carbonate, chloride, fluoride, hydrogenocarbonate, nitrate, nitrite, phosphate, cyanide, sulfate, borate, persulphate, citrate, tartrate, salicylate, tetracycline, ciprofloxacin, sulphamerazine, sulphatiazole, dopamine, glucose, galactose, cysteine and creatinine. The best sensors were successfully applied to the analysis of real samples with relative errors ranging from −6.8 to + 3.7%.

Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL−1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10−5–1.0 × 10−3 M), low detection limit (0.9 µg mL−1), and a stable baseline for a 5 × 10−2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.