Guidelines for the conservation and restoration of seagrasses in the United States and adjacent waters

Seagrass ecosystems are protected under the federal "no-net-loss" policy for wetlands and form one of the most productive plant communities on the planet, performing important ecological functions. Seagrass beds have been recognized as a valuable resource critical to the health and function of coastal waters. Greater awareness and public education, however, is essential for conservation of this resource. Tremendous losses of this habitat have occurred as a result of development within the coastal zone. Disturbances usually kill seagrasses rapidly, and recovery is often comparatively slow. Mitigation to compensate for destruction of existing habitat usually follows when the agent of loss and responsible party are known. Compensation assumes that ecosystems can be made to order and, in essence, trades existing functional habitat for the promise of replacement habitat. While ~lant ingse agrass is not technically complex, there is no easy way to meet the goal of maintaining or increasing seagrass acreage. Rather, the entire process of planning, planting and monitoring requires attention to detail and does not lend itself to oversimplification.

Consumption pattern and consumer preference for value-added fish and fish products in north zone of India

Present paper attempts to analyze consumption pattern and consumer preferences towards value-added fish and fish products in north zone of India. Results reveal that socio economic variables affect consumption of value-added fish and fish products. A total of 49 percent respondents were of middle age group (35 to 50 years). All were literates except 7% from the rural area. All were purchasing fish at least once in 15 days. A total of 90% respondents in rural, 11% in semi urban and 50% in urban area were unaware of value-added fish and fish products. About 10% of respondents had consumed it, out of which most were from urban area. Demand analysis by Cobb Douglas (CD) Demand function revealed that when price of fish, price of the substitutes, income of family and family size were used as independent variables, variation in demand of fish explained by CD Demand function was about 39% in urban area, 24% in semi urban area and 22% in rural area. From Garette ranking technique major problems in fish consumption found were irregular supply, lack of fresh fish, high price and presence of bones in fish. While lack of awareness, unavailability, no preference and unacceptable taste were major problems for consumption of value-added fish and fish products.

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO2 emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production. Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO 2 emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions. Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement. © 2011 Elsevier B.V. All rights reserved.

Factors affecting the adoption of carp polyculture in Bangladesh

A study was conducted to determine the factors affecting adoption of pond polyculture in six villages of three districts namely Mymensingh, Bogra and Narshingdi in Bangladesh. In Mymensingh, 75% pond owners adopted carp polyculture technology whereas in Bogra and Narshingdi only 16% and 25% pond owners, respectively adopted this technology for fish production. The production of fish per unit area was found to be 5 to 10 times higher in Mymensingh compared to that of Bogra and Narshingdi. Fish farmers identified three main problems affecting the adoption of pond polyculture viz. lack of input used in aquaculture, low fish yield and lack of credit facilities for pond polyculture. The technological awareness of the farmers directly contributed towards use of inputs in culture ponds. The positive impact of technological dissemination found on input use, fish yield and uplifted socioeconomic condition.

An assessment of handling and processing methods used for the shrimp fishery by-catch in Kalpitiya, Sri Lanka

The by-catch from the shrimp trawl fishery in Kalpitiya is mainly used for the production of dried fish, which provides an additional source of income for fishermen in the area. It has been observed that current handling practices along the value addition chain are responsible for the poor quality and low price of the end product. This study was aimed at identifying the shortcomings in such handling practices by fishermen and dried fish producers and assessing the quality of shrimp fishery by-catch along the processing chain in order to recommend more efficient utilization methods that will improve the quality of the end product. Fresh fish, dried fish and harbour water samples were tested for total coli forms, faecal coliforms, E. coli and Salmonella in order to assess their microbial quality: In addition, standard plate counts (SPC) of fish samples were also carried out. A survey was carried out from July-October 2006 at Kalpitiya, using a pre-tested questionnaire to collect information from individuals who have been engaged in dried fish processing. Average values obtained for freshly landed and dried fish respectively, were, SPC 9.88x10 super(5) CFU/g and 30.43x10 super(5) CFU/g, total coliforms 23.05 and 24.23 MPN/g and fecal coliforms 8.28 and 9.00 MPN/g. These values exceed the recommendations in the SL standards. A quarter of the landed fresh fish and 38% of dried fish from the producers were positive for E. coli and thus failed to show required end product quality. SPC of harbour water was 14.35x10 super(6) CFU/ml and all samples were found to be contaminated with E. coli. None of the fishermen and dried fish producers were satisfied with the quality of the end product. The reasons for poor quality as indicated by them were: limited availability of ice (75%), lack of infrastructure facilities (65%), uncertainty of markets (52%), lack of emphasis on quality (47%) and poor access to available technologies (41%). Respondents to the questionnaire also identified: unavailability of potable water, insulated boxes, good landing jetty, racks for drying fish, poor cold storage facilities and limitations in dried fish storage facilities, as further factors leading to the loss of quality in their products. Results demonstrate that improvements to the infrastructure facilities and conducting of proper awareness programmes on handling practices could lead for improvements in the quality of value added products prepared from the shrimp fishery by-catch at Kalpitiya.

Beyond theory: An examination of lean new product introduction practices in the UK

Interest is growing around the application of lean techniques to new product introduction (NPI). Although a relatively emergent topic compared with the application of 'lean' within the factory, since 2000 there has been an exponential rise in the literature on this subject. However, much of this work focuses on describing and extolling the virtues of the 'Toyota approach' to design. Therefore, by way of a stock take for the UK, the present authors' research has set out to understand how well lean product design practices have been adopted by leading manufacturers. This has been achieved by carrying out in-depth case studies with three carefully selected manufacturers of complex engineered products. This paper describes these studies, the detailed results and subsequent findings, and concludes that both the awareness and adoption of practices is generally embryonic and far removed from the theory advocated in the literature. © IMechE 2007.

The role for low carbon electrification technologies in poverty reduction and climate change strategies: A focus on renewable energy mini-grids with case studies in Nepal, Peru and Kenya

As a potential poverty reduction and climate change strategy, this paper considers the advantages and disadvantages of using renewable energy technologies for rural electrification in developing countries. Although each case must be considered independently, given a reliable fuel source, renewable energy mini-grids powered by biomass gasifiers or micro-hydro plants appear to be the favoured option due to their lower levelised costs, provision of AC power, potential to provide a 24. h service and ability to host larger capacity systems that can power a wide range of electricity uses. Sustainability indicators are applied to three case studies in order to explore the extent to which sustainable welfare benefits can be created by renewable energy mini-grids. Policy work should focus on raising awareness about renewable energy mini-grids, improving institutional, technical and regulatory frameworks and developing innovative financing mechanisms to encourage private sector investments. Establishing joint technology and community engagement training centres should also be encouraged. © 2011 Elsevier Ltd.

Stakeholder challenges in purchasing medical devices for patient safety.

OBJECTIVE: This study identifies the stakeholders who have a role in medical device purchasing within the wider system of health-care delivery and reports on their particular challenges to promote patient safety during purchasing decisions. METHODS: Data was collected through observational work, participatory workshops, and semi-structured qualitative interviews, which were analyzed and coded. The study takes a systems-based and engineering design approach to the study. Five hospitals took part in this study, and the participants included maintenance, training, clinical end-users, finance, and risk departments. RESULTS: The main stakeholders for purchasing were identified to be staff from clinical engineering (Maintenance), device users (Clinical), device trainers (Training), and clinical governance for analyzing incidents involving devices (Risk). These stakeholders display varied characteristics in terms of interpretation of their own roles, competencies for selecting devices, awareness and use of resources for purchasing devices, and attitudes toward the purchasing process. The role of "clinical engineering" is seen by these stakeholders to be critical in mediating between training, technical, and financial stakeholders but not always recognized in practice. CONCLUSIONS: The findings show that many device purchasing decisions are tackled in isolation, which is not optimal for decisions requiring knowledge that is currently distributed among different people within different departments. The challenges expressed relate to the wider system of care and equipment management, calling for a more systemic view of purchasing for medical devices.

Manufacturing excellent engineers: Skill development in a Masters programme

An MPhil programme, delivered by the Engineering Department at the University of Cambridge, claims to be excellent at preparing graduates for manufacturing industry careers. The course uses a combination of different educational experiences, including industry-based assignments, industrial visits and practical exercises. This research explores how problem solving skills are developed during the first module, Induction, which is designed to enable students to undertake their first industrial assignment. From the literature, four conditions necessary for skill development were identified: Provision of a skill description, making explicit key components A number of different experiences with a range of contextual variables A teaching process which includes regular feedback and student reflection Students motivated to learn. These were used to construct a skill development framework (SDF). Using a case study research design, multiple types of evidence were collected to test for the above conditions using both classroom observation and questionnaire methods. The results confirmed the presence of the SDF conditions at different levels, with reflection aspects considered the weakest. Conflicting results were obtained regarding the students' self-awareness of skill levels. A plausible explanation is a change in the students' frame of reference. This initial study set out to develop a better understanding of the process of skill development. Whilst the SDF appears reasonable, there is a need for further work in three broad areas of defining skills, assessing skills and developing reflection skills.

Environmental threats to children's health in Southeast Asia and the Western Pacific

The Southeast Asia and Western Pacific regions contain half of the world's children and are among the most rapidly industrializing regions of the globe. Environmental threats to children's health are widespread and are multiplying as nations in the area undergo industrial development and pass through the epidemiologic transition. These environmental hazards range from traditional threats such as bacterial contamination of drinking water and wood smoke in poorly ventilated dwellings to more recently introduced chemical threats such as asbestos construction materials; arsenic in groundwater; methyl isocyanate in Bhopal, India; untreated manufacturing wastes released to landfills; chlorinated hydrocarbon and organophosphorous pesticides; and atmospheric lead emissions from the combustion of leaded gasoline. To address these problems, pediatricians, environmental health scientists, and public health workers throughout Southeast Asia and the Western Pacific have begun to build local and national research and prevention programs in children's environmental health. Successes have been achieved as a result of these efforts: A cost-effective system for producing safe drinking water at the village level has been devised in India; many nations have launched aggressive antismoking campaigns; and Thailand, the Philippines, India, and Pakistan have all begun to reduce their use of lead in gasoline, with resultant declines in children's blood lead levels. The International Conference on Environmental Threats to the Health of Children, held in Bangkok, Thailand, in March 2002, brought together more than 300 representatives from 35 countries and organizations to increase awareness on environmental health hazards affecting children in these regions and throughout the world. The conference, a direct result of the Environmental Threats to the Health of Children meeting held in Manila in April 2000, provided participants with the latest scientific data on children's vulnerability to environmental hazards and models for future policy and public health discussions on ways to improve children's health. The Bangkok Statement, a pledge resulting from the conference proceedings, is an important first step in creating a global alliance committed to developing active and innovative national and international networks to promote and protect children's environmental health.

An analysis of the recent severe storm surge disaster events in China

The economic loss caused by the storm surge disasters is much higher than that caused by any other marine disaster in China, the loss from the severe storm surge disaster being the highest. Statistics show that there were 62 typhoon landings over the east-southeast coast of China since 1990, three of which, occurring in 1992, 1994 and 1997, respectively, caused the most severe damage. The direct economic losses due to these events are 9.3, 17.0 and 30 billion yuan (RMB, or about 1.7, 2.6 and 3.8 billion USD, respectively), which is much greater than the loss of 5.5 billion yuan (RMB) on an average every year during the 1989-1991 period. This paper makes a comparative analysis of the damage caused by the three events and presents an overview of progress of precautions against storm surge disaster in China. The suggested counter measures to mitigate the loss from the severe storm surge disasters in China is as follows: (1) Raise the whole society awareness of precaution against severe storm surge disaster; (2) Work out a new plan for building sea walls; (3) Improve and perfect the available warning and disaster relief command system; (4) Develop the insurance service in order to promptly mitigate the loss caused by severe storm surge disaster event.

Una testimonianza silenziosa.Storia della Chiesa cattolica in Tunisia dal Trattato del Bardo alla ‘rivoluzione dei gelsomini’

The work examines the change involving the Church in Tunisia from the period of the Protectorate to the present through the fundamental moments of independence (1956) and the signing of the ‘Modus vivendi’ (1964). In the first structure of the “modern” Church, a fundamental role was played by the complex figure of the French Cardinal Charles-Allemand Lavigerie who, while giving strong impulse to setting up disinterested charitable social initiatives by the congregations (Pères Blancs, Soeurs Blanches and others), also represented the ideal of the ‘evangelizing’ (as well as colonial) Church which, despite its declared will to avoid proselytism, almost inevitably tended to slip into it. During the French Protectorate (1881-1956) the ecclesiastic institution concentrated strongly on itself, with little heed for the sensitivity of its host population, and developed its activities as if it were in a European country. From the social standpoint, the Church was mostly involved in teaching, which followed the French model, and health facilities. In the Church only the Pères Blancs missionaries were sincerely committed to promoting awareness of the local context and dialogue with the Muslims. The Catholic clergy in the country linked its religious activity close to the policy of the Protectorate, in the hope of succeeding in returning to the ancient “greatness of the African Church”, as the Eucharistic Congress in Carthage in 1930 made quite clear. The Congress itself planted the first seed in the twentyfive- year struggle that led the Tunisian population to independence in 1956 and the founding of the Republic in 1957. The conquest of independence and the ‘Modus vivendi’ marked a profound change in the situation and led to an inversion of roles: the Catholic community was given the right to exist only on the condition that it should not interfere in Tunisian society. The political project of Bourguiba, who led the Republic from 1957 to 1987, aimed to create a strongly egalitarian society, with a separation between political and religious powers. In particular, in referring to the Church, he appeared as a secularist with no hostility towards the Catholics who were, however, considered as “cooperators”, welcome so long as they were willing to place their skills at the service of the construction of the state. So, in the catholic Community was a tension between the will of being on the side of the country and that of conserving a certain distance from it and not being an integral part of it. In this process of reflection, the role of the Second Vatican Council was fundamental: it spread the idea of a Church open to the world and the other religions, in particular to Islam: the teaching of the Council led the congregations present in the country to accept the new condition. This new Church that emerged from the Council saw some important events in the process of “living together”, of “cultural mixing” and the search for a common ground between different realities. The almost contemporary arrival of Arab bishops raised awareness among the Tunisians of the existence of Christian Arabs and, at the same time, the Catholic community began considering their faith in a different way. In the last twenty years the situation has continued to change. Side by side with the priests present for decades or even those born there, some new congregations have begun to operate, albeit in small numbers: they have certainly revitalized the community of the faithful, but they sometimes appear more devoted to service “within” the Church, than to services for the population, and are thus characterized by exterior manifestations of their religion. This sort of presence has made it possible for Bourguiba's successor, Ben Ali (president from 1987 to 2011), to practice forms of tolerance even more clearly, but always limited to formal relations; the Tunisians are still far from having a real understanding of the Catholic reality, with certain exceptions connected to relations on a personal and not structured plane, as was the case in the previous period. The arrival of a good number of young people from sub-Saharan Africa, most of all students, belonging to the JCAT, and personnel of the BAD has “Africanized” the Church in Tunisia and has brought about an increase in Christians' exterior manifestations; but this is a visibility that is not blatant but discreet, with the implicit risk of the Church continuing to be perceived as a sort of exterior body, alien to the country; nor can we say, lacking proper documentation, how it will be possible to build a bridge between different cultures through the “accompaniment” of Christian wives of Tunisians. Today, the Church is living in a country that has less and less need of it; its presence, in the schools and in health facilities, is extremely reduced. And also in other sectors of social commitment, such as care for the disabled, the number of clergymen involved is quite small. The ‘revolution’ in 2011 and the later developments up to the present have brought about another socio-political change, characterized by a climate of greater freedom, but with as yet undefinable contours. This change in the political climate will inevitable have consequences in Tunisia’s approach to religious and cultural minorities, but it is far too soon to discuss this on the historical and scientific planes.

Using an Outdoor Learning Space to Teach Sustainability and Material Processes in HE product Design.

The world is facing environmental changes that are increasingly affecting how we think about manufacturing, the consumption of products and use of resources. Within the HE product design community, thinking and designing sustainability’ has evolved to become a natural part of the curriculum. Paradoxical as the rise in awareness of sustainability increases there is growing concern within HE product design of the loss of workshop facilities and as a consequence a demise in teaching traditional object-making skills and material experimentation. We suggest the loss of workshops and tangible ‘learning by making skills’ also creates a lost opportunity for a rich learning resource to address sustainable thinking, design and manufacture ‘praxis’ within HE design education. Furthermore, as learning spaces are frequently discussed in design research, there seems to be little focus on how the use of an outdoor environment might influence learning outcomes particularly with regard to material teaching and sustainability. This 'case study' of two jewellery workshops, used outdoor learning spaces to explore both its impact on learning outcomes and to introduce some key principles of sustainable working methodologies and practices. Academics and students mainly from Norway and Scotland collaborated on this international research project. Participants made models from disposable packaging materials, which were cast in tin, in the sand on a local beach, using found timber to create a heat source for melting the metal. This approach of using traditional making skills, materials and nature was found to be a relevant contribution to a sustainable discourse.

JUSTEIS: JISC Usage Surveys: Trends in Electronic Information Services Final report 2003/2004 Cycle Five

Urquhart, C., Spink, S., Thomas, R., Yeoman, A., Durbin, J., Turner, J., Fenton, R. & Armstrong, C. (2004). JUSTEIS: JISC Usage Surveys: Trends in Electronic Information Services Final report 2003/2004 Cycle Five. Aberystwyth: Department of Information Studies, University of Wales Aberystwyth. Sponsorship: JISC

JUSTEIS (JISC Usage Surveys: Trends in Electronic Information Services) Strand A: survey of end users of all electronic information services (HE and FE), with Action research report. Final report 2002/2003 Cycle Four.

Urquhart, C. (editor for JUSTEIS team), Spink, S., Thomas, R., Yeoman, A., Durbin, J., Turner, J., Armstrong, A., Lonsdale, R. & Fenton, R. (2003). JUSTEIS (JISC Usage Surveys: Trends in Electronic Information Services) Strand A: survey of end users of all electronic information services (HE and FE), with Action research report. Final report 2002/2003 Cycle Four. Aberystwyth: Department of Information Studies, University of Wales Aberystwyth with Information Automation Ltd (CIQM). Sponsorship: JISC