Curvature and wrinkling of premixed flame Kernels comparison between planar laser induced fluorescence (PLIF) and 3D direct numerical simulations (DNS)

A direct comparison between time resolved PLIF measurements of OH and two dimensional slices from a full three dimensional DNS data set of turbulent premixed flame kernels in lean methane/air mixture was presented. The local flame structure and the degree of flame wrinkling were examined in response to differing turbulence intensities and turbulent Reynolds numbers. Simulations were performed using the SEGA DNS code, which is based on the solution of the compressible Navier Stokes, species, and energy equations for a lean hydrocarbon mixture. For the OH PLIF measurements, a cluster of four Nd:YAG laser was fired sequentially at high repetition rates and used to pump a dye laser. The frequency doubled laser beam was formed into a sheet of 40 mm height using a cylindrical telescope. The combination of PLIF and DNS has been demonstrated as a powerful tool for flame analysis. This research will form the basis for the development of sub-grid-scale (SGS) models for LES of lean-premixed combustion systems such as gas turbines. This is an abstract of a paper presented at the 30th International Symposium on Combustion (Chicago, IL 7/25-30/2004).

Energy Principle And Nonlinear Electric-Mechanical Behavior Of Ferroelectric Ceramics

Many experimental observations have shown that a single domain in a ferroelectric material switches by progressive movement of domain walls, driven by a combination of electric field and stress. The mechanism of the domain switch involves the following steps: initially, the domain has a uniform spontaneous polarization; new domains with the reverse polarization direction nucleate, mainly at the surface, and grow though the crystal thickness; the new domain expands sideways as a new domain continues to form; finally, the domain switch coalesces to complete the polarization reversal. According to this mechanism, the volume fraction of the domain switching is introduced in the constitutive law of the ferroelectric material and used to study the nonlinear constitutive behavior of a ferroelectric body in this paper. The principle of stationary total potential energy is put forward in which the basic unknown quantities are the displacement u(i), electric displacement D-i and volume fraction rho(I) of the domain switching for the variant I. The mechanical field equation and a new domain switching criterion are obtained from the principle of stationary total potential energy. The domain switching criterion proposed in this paper is an expansion and development of the energy criterion established by Hwang et al. [ 1]. Based on the domain switching criterion, a set of linear algebraic equations for determining the volume fraction rho(I) of domain switching is obtained, in which the coefficients of the linear algebraic equations only contain the unknown strain and electric fields. If the volume fraction rho(I) of domain switching for each domain is prescribed, the unknown displacement and electric potential can be obtained based on the conventional finite element procedure. It is assumed that a domain switches if the reduction in potential energy exceeds a critical energy barrier. According to the experimental results, the energy barrier will strengthen when the volume fraction of the domain switching increases. The external mechanical and electric loads are increased step by step. The volume fraction rho(I) of domain switching for each element obtained from the last loading step is used as input to the constitutive equations. Then the strain and electric fields are calculated based on the conventional finite element procedure. The finite element analysis is carried out on the specimens subjected to uniaxial coupling stress and electric field. Numerical results and available experimental data are compared and discussed. The present theoretic prediction agrees reasonably with the experimental results.

Recuperar plásticos desechables a los fines de conformar elementos constructivos de una vivienda económica como respuesta social, analizada como un problema de ingeniería industrial

Resumen: El hecho de seleccionar a los plásticos dentro de nuestro proyecto es porque son en particular, partes abundantes y visibles en la composición de los residuos generados en nuestra sede UCA Campus Rosario. Razonamos que son varias las áreas que los producen en forma cotidiana o de modo transitorio (como es el caso de eventos), a las que podemos sumar un accionar ambientalmente responsable. Ello nos impone la responsabilidad de proponer algún modo de re-utilizarlos en el diseño de ciertos elemento que los integre como materia prima, material de aporte, insumo o material auxiliar, con un amplio campo de posibilidades como es en la construcción, a partir de una mirada desde la ingeniería ambiental. La metodología de trabajo que desarrollamos implica inspeccionar la materia prima con la cual se va a trabajar, a los fines de conocerla fehacientemente, así como internalizar la posible combinación entre los distintos tipos de plásticos de acuerdo a su composición y su respuesta en la integración con otros materiales de uso tradicional, de acuerdo a experiencias reconocidas Desde una mirada lineal la educación sola no alcanza, como tampoco la tecnología ni las medidas parciales son suficientes para aliviar este tremendo desequilibrio que venimos heredando. Ante estos hechos es perentorio comprender la complejidad, actuar desde allí descubriendo la conexión invisible entre el ser humano y el medio, y los seres humanos entre sí. Debido a ello entendemos que para restaurar el medio ambiente en principio hay que comenzar por restaurar los vínculos y los ciclos que los contienen, esto implica re-ciclar.

Energy principle of ferroelectric ceramics and single domain mechanical model

Many physical experiments have shown that the domain switching in a ferroelectric material is a complicated evolution process of the domain wall with the variation of stress and electric field. According to this mechanism, the volume fraction of the domain switching is introduced in the constitutive law of ferroelectric ceramic and used to study the nonlinear constitutive behavior of ferroelectric body in this paper. The principle of stationary total energy is put forward in which the basic unknown quantities are the displacement u (i) , electric displacement D (i) and volume fraction rho (I) of the domain switching for the variant I. Mechanical field equation and a new domain switching criterion are obtained from the principle of stationary total energy. The domain switching criterion proposed in this paper is an expansion and development of the energy criterion. On the basis of the domain switching criterion, a set of linear algebraic equations for the volume fraction rho (I) of domain switching is obtained, in which the coefficients of the linear algebraic equations only contain the unknown strain and electric fields. Then a single domain mechanical model is proposed in this paper. The poled ferroelectric specimen is considered as a transversely isotropic single domain. By using the partial experimental results, the hardening relation between the driving force of domain switching and the volume fraction of domain switching can be calibrated. Then the electromechanical response can be calculated on the basis of the calibrated hardening relation. The results involve the electric butterfly shaped curves of axial strain versus axial electric field, the hysteresis loops of electric displacement versus electric filed and the evolution process of the domain switching in the ferroelectric specimens under uniaxial coupled stress and electric field loading. The present theoretic prediction agrees reasonably with the experimental results given by Lynch.

A new expression of hardening coefficients for fcc-crystal and calibration of the material constants

In order to describe the effect of latent hardening on the macro-plastic behavior of foc-crystal, a new expression for hardening coefficient is proposed in which there are 12 material constants, each having clear physical meaning. And a method of material constant calibration is suggested and used to determine the material constants of copper and aluminum crystal. The simulated load-elongation curves along various crystallographic orientations are comparable with the experimental ones.

Description of a new genus and species of hummingbird from Panama

Since January, 1911, Mr. E. A. Goldman, of the Biological Survey, U.S.Department of Agriculture, has been detailed to the Smithsonian Biological Survey of the Panama Canal Zone to collect mammals and birds in the Canal Zone and adjacent parts of Panama... (Document contains 4 pages)

Descriptions of twelve new species and subspecies of mammals from Panama

In the early part of 1911 a collection of 368 mammals was made by me while engaged in the biological survey of the Canal Zone, and adjacent parts of Panama, undertaken by the Smithsonian Institution in cooperation with several government departments, including the War Department and Department of Agriculture. This collection, representing between 40 and 50 genera, includes 12 new species and subspecies which are here published in advance of a general report on the mammals of the region...(Document contains 13 pages)

Comparative Observation of DC Arc Plasma Jets and Their Arc Root Behaviors at Reduced Pressure

Experimentally observed, results are presented for the DCarcplasmajets and theirarc-rootbehaviors generated atreduced gas pressure and without or with an' applied magnetic field. Pure argon, argon -hydrogen or argon-nitrogen mixture is used as the plasma-forming gas. A specially designed copper mirror is constructed and used for better observing the arc-root behavior on the anode surface of the DC non-transferred arcplasma torch. It is shown that for the cases without applied magnetic field, the laminar plasmajets are stable and approximately axisymmetrical. The arc-root attachment on the anode surface is completely diffusive when argon is used as the plasma-forming gas, while the arc-root attachment often becomes constrictive when hydrogen or nitrogen is added into the argon. When an external magnetic field is applied, the arcroot tends to rotate along the anode surface of the non-transferred arcplasma torch.

The Geo-DSCM System and Its Application to the Deformation Measurement of Rock Materials

Digital Speckle Correlation Method (DSCM) is a useful tool for whole field deformation measurement, and has been applied to analyze the deformation field of rock materials in recent years. In this paper, a Geo-DSCM system is designed and used to analyse the more complicated problems of rock mechanics, such as damage evolution and failure procedure. A weighted correlation equation is proposed to improve the accuracy of displacement measurement on a heterogeneous deformation field. In addition, a data acquisition system is described that can synchronize with the test machine and can capture speckle image at various speeds during experiment. For verification of the Geo-DSCM system, the failure procedure of a borehole rock structure is inspected and the evolution of the deformation localization is analysed. It is shown that the deformation localization generally initializes at the vulnerable area of the rock structure but may develop in a very complicated way.

BONDING OF ALUMINA AND METAL USING BULK METALLIC GLASS FORMING ALLOY

Metal-alumina joints have found various practical applications in electronic devices and high technology industry. However, making of sound metal ceramic brazed couple is still a challenge in terms of its direct application in the industry. In this work we successfully braze copper with Al2O3 ceramic using Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass forming alloy as filler alloy. The shear strength of the joints can reach 140 MPa, and the microstructrural analysis confirms a reliable chemical boning of the interface. The results show that the bulk metallic glass forming alloys with high concentration of active elements are prospective for using as filler alloy in metal-ceramic bonding.

Year class mortality, abundance and yield-per-recruit of yellowfin tuna in the eastern Pacific Ocean, 1954-1959

ENGLISH: One primary duty of the Inter-American Tropical Tuna Commission is to estimate the maximum sustainable catches of yellowfin tuna (Neothunnus macropterus) and skipjack (Katsuwonus pelamis), and to investigate and recommend proposals to maintain the stocks at levels which will permit these catches to be obtained. To do this, there is required some means of predicting yields relative to fishing intensity. . . The age composition of catch, and growth rate of yellowfin tuna for recent years have now been estimated (Hennemuth, 1961). In this paper, relative abundance at age of yellowfin tuna shall be estimated -and used, in turn, to estimate total mortality rate. Yield-per-recruit calculations, based on Beverton and Holt's (1957) simple equation, will be presented to compare present utilization with theoretical maxima under varying levels of fishing mortality and different ages at first capture. SPANISH: Uno de los principales deberes de la Comisión Interamericana del Atún Tropical es estimar las pescas máximas sostenibles de los atunes aleta amarilla (Neothunnus macropterus) y barrilete (Katsuwonus pelamis) , así como estudiar y recomendar proposiciones para mantener los stocks a niveles que permitan obtener estas pescas. Para lograr este propósito se requieren algunos medios que permitan predecir el rendimiento en relación con la intensidad de la pesca. . La composición de edades de la pesca y la tasa de crecimiento del atún aleta amarilla en años recientes han sido estimadas ahora (Hennemuth, 1961). En este trabajo, la abundancia relativa a una edad dada de esta especie será estimada y usada, a su vez, para estimar la tasa de mortalidad total. Los cálculos del rendimiento por recluta, basados en la ecuación simple de Beverton y Holt (1957), serán presentados para comparar la utilización actual con los máximos teóricos bajo valores variables de mortalidad por la pesca y a diferentes edades a la primera captura.

Estimation of year class abundance and mortality of yellowfin tuna in the Eastern Tropical Pacific

ENGLISH: Age composition of catch, and growth rate, of yellowfin tuna have been estimated by Hennemuth (1961a) and Davidoff (1963). The relative abundance and instantaneous total mortality rate of yellowfin tuna during 1954-1959 have been estimated by Hennenmuth (1961b). It is now possible to extend this work, because more data are available; these include data for 1951-1954, which were previously not available, and data for 1960-1962, which were collected subsequent to Hennemuth's (1961b) publication. In that publication, Hennemuth estimated the total instantaneous mortality rate (Z) during the entire time period a year class is present in the fishery following full recruitment. However, this method may lead to biased estimates of abundance, and hence mortality rates, because of both seasonal migrations into or out of specific fishing areas and possible seasonal differences in availability or vulnerability of the fish to the fishing gear. Schaefer, Chatwin and Broadhead (1961) and Joseph etl al. (1964) have indicated that seasonal migrations of yellowfin occur. A method of estimating mortality rates which is not biased by seasonal movements would be of value in computations of population dynamics. The method of analysis outlined and used in the present paper may obviate this bias by comparing the abundance of an individual yellowfin year class, following its period of maximum abundance, in an individual area during a specific quarter of the year with its abundance in the same area one year later. The method was suggested by Gulland (1955) and used by Chapman, Holt and Allen (1963) in assessing Antarctic whale stocks. This method, and the results of its use with data for yellowfin caught in the eastern tropical Pacific from 1951-1962 are described in this paper. SPANISH: La composición de edad de la captura, y la tasa de crecimiento del atún aleta amarilla, han sido estimadas por Hennemuth (1961a) y Davidoff (1963). Hennemuth (1961b), estimó la abundancia relativa y la tasa de mortalidad total instantánea del atún aleta amarilla durante 1954-1959. Se puede ampliar ahora, este trabajo, porque se dispone de más datos; éstos incluyen datos de 1951 1954, de los cuales no se disponía antes, y datos de 1960-1962 que fueron recolectados después de la publicación de Hennemuth (1961b). En esa obra, Hennemuth estimó la tasa de mortalidad total instantánea (Z) durante todo el período de tiempo en el cual una clase anual está presente en la pesquería, consecutiva al reclutamiento total. Sin embargo, este método puede conducir a estimaciones con bias (inclinación viciada) de abundancia, y de aquí las tasas de mortalidad, debidas tanto a migraciones estacionales dentro o fuera de las áreas determinadas de pesca, como a posibles diferencias estacionales en la disponibilidad y vulnerabilidad de los peces al equipo de pesca. Schaefer, Chatwin y Broadhead (1961) y Joseph et al. (1964) han indicado que ocurren migraciones estacionales de atún aleta amarilla. Un método para estimar las tasas de mortalidad el cual no tuviera bias debido a los movimientos estacionales, sería de valor en los cómputos de la dinámica de las poblaciones. El método de análisis delineado y usado en el presente estudio puede evitar este bias al comparar la abundancia de una clase anual individual de atún aleta amarilla, subsecuente a su período de abundancia máxima en un área individual, durante un trimestre específico del año, con su abundancia en la misma área un año más tarde. Este método fue sugerido por Gulland (1955) y empleado por Chapman, Holt y Allen (1963) en la declaración de los stocks de la ballena antártica. Este método y los resultados de su uso, en combinación con los datos del atún aleta amarilla capturado en el Pacífico oriental tropical desde 1951-1962, son descritos en este estudio.

Ecology of Juvenile Walleye Pollock, Theragra chalcogramma: Papers from the workshop "The Importance of Prerecruit Walleye Pollock to the Bering Sea and North Pacific Ecosystems" Seattle, Washington, 28-30 October 1993

The Alaska Fisheries Science Center (AFSC), National Marine Fisheries Service (NMFS), hosted an international workshop, 'The Importance of Prerecruit Walleye Pollock to the Bering Sea and North Pacific Ecosystems," from 28 to 30 October 1993. This workshop was held in conjunction with the annual International North Pacific Marine Science Organization (PICES) meeting held in Seattle. Nearly 100 representatives from government agencies, universities, and the fishing industry in Canada, Japan, the People's Republic of China, Russia, and the United States took part in the workshop to review and discuss current knowledge on juvenile pollock from the postlarval period to the time they recruit to the fisheries. In addition to its importance to humans as a major commercial species, pollock also serves as a major forage species for many marine fishes, birds, and mammals in the North Pacific region. (PDF file contains 236 pages.)

Über Fischereiressourcen und ihre Nutzung

The reduction of discards will only be achieved, if more effective methods of catch selection will be developed and used. In principle, the unavoidable by catch of commercial fish should be used for human consumption, independent of the requirements for minimum length and existing catch quotas. The amount of such bycatch should be charged to the total catch quota and preferably be used for processing of fish portions with skin (carcasses with skin), because this kind of processing results in higher yields and nutrional advantages compared to fillet processing. Unfortunately, nowadays, in the German fishery and fish trade this traditional form of supply is only of minor importance because of the predominance of fillets and fillet products. However, cooperation between fishing industry and fish trade and a good advertising of processed fish portions with skin could overcome this problem. In the pelagic fishery of herring, mackerel and other similar pelagic species the bycatch of small sized specimen of these species can be a problem. These small sized fish can principally be processed to traditional fish products, but the processing costs for them are much higher. The prospects for processing of the bycatch into minced fish meat, fish protein concentrate or fish protein hydrolysate are very poor under the existing regime in the German fishing industry. A further way for processing of the bycatch, which can not be used for human consumption, is the production of fishmeal. However, only three German factory ships dispose of fish meal plants. Under the current economic conditions, i.e. because of limited storage capacity, the Ger-man trawler and cutter fleet is not able to transport the bycatch for fish meal production ashore.

Bonding Of Alumina And Metal Using Bulk Metallic Glass Forming Alloy

Metal-alumina joints have found various practical applications in electronic devices and high technology industry. However, making of sound metal ceramic brazed couple is still a challenge in terms of its direct application in the industry. In this work we successfully braze copper with Al2O3 ceramic using Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass forming alloy as filler alloy. The shear strength of the joints can reach 140 MPa, and the microstructrural analysis confirms a reliable chemical boning of the interface. The results show that the bulk metallic glass forming alloys with high concentration of active elements are prospective for using as filler alloy in metal-ceramic bonding.