Piezo-assisted nuclear transfer affects cloning efficiency and may cause apoptosis

Even though it generates healthy adults, nuclear transfer in mammals remains an inefficient process. Mainly attributed to abnormal reprograming of the donor chromatin, this inefficiency may also be caused at least partly by a specific effect of the clonin

Organoleptic and microbiological quality changes of catla (Catla catla) in immediate and delayed ice storage and at ambient temperature

An investigation was carried out on the quality changes of Catla (Catla calla) stored immediately (0 h) in ice, after 6 hours in ice and at ambient temperature. The samples were examined for organoleptic and microbiological parameters in summer. Organoleptically, the acceptability of fish varied between 16-20 days in both the iced storage conditions and 12-13.5 hours at ambient temperature (28°C). When fish were organoleptically just acceptable on the 16th day of storage, bacterial load were 6.23 and 6.17 log10 cfu/g, respectively for 0 hour and after 6 hours iced fish. But on the 20th day of storage, when fish were just unacceptable SPC were 6.51 and 6.62 log10 cfu/g. In case of ambient temperature storage condition standard plate count was 8.36 log10 cfu/g on 13.5 hours, when fish were organoleptically just unacceptable. At the time of rejection for fish stored in ice (0 hour and after 6 hours) on 20th day, gram negative and gram positive values were 55.45%, 44.55% and 44.52%, 55.48% respectively. While fish were rejected after 13.5 hours at ambient temperature gram negative and gram positive bacteria were found as 43.02% and 56.98%. The differences in SPC, gram positive and gram negative bacteria between the storage times were statistically significant (p<0.05).

Offshore geology of Pakistan and non-living resource prospects

Offshore geology of Pakistan is characterized by active and passive continental margins. These continental margins show very unique features such as an active Makran subduction zone in the west and the Indus delta and a submarine fan in the east. The geology of these features of Pakistan EEZ is inadequately known. This is a major obstacle in exploring mineral resources. Detailed study of coastal and shelf geology is needed for better understanding of the geology of the area and comprehensive evolution of its non-living resource potential. An understanding of the geological events including tectonic movements, sedimentation processes and geochemical history that comprise the geological history is very important to help in identification and estimation of resources. In Pakistan EEZ applying the current technology and undertaking research work to understand the seafloor features and mineral deposits associated with it will be very fruitful.

Strategies for sustainable use of living aquatic resources

Recommendations of the Department of Environment and Natural Resources (Philippines) to conserve biodiversity, maintain the integrity of the environment, protect fishery stocks, involve fishing communities in the management, and use environment-friendly technologies for enhancing fishery production.

Photo-assisted hydrosilylation of silicon nanoparticles: Dependence of particle size on grafting chemistry

Silicon nanoparticles between 2.5 nm and 30 nm in diameter were functionalized by means of photoassisted hydrosilylation reactions in the aerosol phase with terminal alkenes of varying chain length. Using infrared spectroscopy and nuclear magnetic resonance, the chemical composition of the alkyl layer was determined for each combination of particle size and alkyl chain length. The spectroscopic techniques were used to determine that smaller particles functionalized with short chains in the aerosol phase tend to attach to the interior (β) alkenyl carbon atom, whereas particles >10 nm in diameter exhibit attachment primarily with the exterior (α) alkenyl carbon atom, regardless of chain length. © 2011 American Chemical Society.

Air stable complementary polymer circuits fabricated in ambient condition by inkjet printing

Air stable complementary polymer inverters were demonstrated by inkjet printing of both top-gate electrodes and the semiconductors in ambient conditions. The p-type and n-type polymer semiconductors were also thermally annealed in ambient conditions after printing. The good performance of circuits in ambient condition shows that the transistors are not only air-stable in term of ambient humidity and oxygen, but also inert to ion migration through dielectrics from the printed gate. The result obtained here has further confirmed the feasibility of fabrication of low-cost polymer complementary circuits in a practical environment. © 2011 Elsevier B.V. All rights reserved.

A 4 GHz non-resonant clock driver with inductor-assisted energy return to power grid

Power consumption of a multi-GHz local clock driver is reduced by returning energy stored in the clock-tree load capacitance back to the on-chip power-distribution grid. We call this type of return energy recycling. To achieve a nearly square clock waveform, the energy is transferred in a non-resonant way using an on-chip inductor in a configuration resembling a full-bridge DC-DC converter. A zero-voltage switching technique is implemented in the clock driver to reduce dynamic power loss associated with the high switching frequencies. A prototype implemented in 90 nm CMOS shows a power savings of 35% at 4 GHz. The area needed for the inductor in this new clock driver is about 6% of a local clock region. © 2006 IEEE.

Nearest neighbour decoding with pilot-assisted channel estimation for fading multiple-access channels

This paper studies a noncoherent multiple-input multiple-output (MIMO) fading multiple-access channel (MAC). The rate region that is achievable with nearest neighbour decoding and pilot-assisted channel estimation is analysed and the corresponding pre-log region, defined as the limiting ratio of the rate region to the logarithm of the signal-to-noise ratio (SNR) as the SNR tends to infinity, is determined. © 2011 IEEE.

Substrate-assisted nucleation of ultra-thin dielectric layers on graphene by atomic layer deposition

We report on a large improvement in the wetting of Al 2O 3 thin films grown by un-seeded atomic layer deposition on monolayer graphene, without creating point defects. This enhanced wetting is achieved by greatly increasing the nucleation density through the use of polar traps induced on the graphene surface by an underlying metallic substrate. The resulting Al 2O 3/graphene stack is then transferred to SiO 2 by standard methods. © 2012 American Institute of Physics.

Tensile response of passivated films with climb-assisted dislocation glide

The tensile response of single crystal films passivated on two sides is analysed using climb enabled discrete dislocation plasticity. Plastic deformation is modelled through the motion of edge dislocations in an elastic solid with a lattice resistance to dislocation motion, dislocation nucleation, dislocation interaction with obstacles and dislocation annihilation incorporated through a set of constitutive rules. The dislocation motion in the films is by glide-only or by climb-assisted glide whereas in the surface passivation layers dislocation motion occurs by glide-only and penalized by a friction stress. For realistic values of the friction stress, the size dependence of the flow strength of the oxidised films was mainly a geometrical effect resulting from the fact that the ratio of the oxide layer thickness to film thickness increases with decreasing film thickness. However, if the passivation layer was modelled as impenetrable, i.e. an infinite friction stress, the plastic hardening rate of the films increases with decreasing film thickness even for geometrically self-similar specimens. This size dependence is an intrinsic material size effect that occurs because the dislocation pile-up lengths become on the order of the film thickness. Counter-intuitively, the films have a higher flow strength when dislocation motion is driven by climb-assisted glide compared to the case when dislocation motion is glide-only. This occurs because dislocation climb breaks up the dislocation pile-ups that aid dislocations to penetrate the passivation layers. The results also show that the Bauschinger effect in passivated thin films is stronger when dislocation motion is climb-assisted compared to films wherein dislocation motion is by glide-only. © 2012 Elsevier Ltd.