Desenvolvimento de componentes nanométricos para aplicação em células a combustível à base de sólidos estruturados e filmes finos

The present work aims the preparation of filmes of strontium-doped lanthanum manganite (perovskita) yttria-stabilized zirconia (LSM-SDC) films deposited on substrate of YSZ by means of spin coating technique having as principal objective their application to solid oxide fuel cells of intermediate temperature. La0,8Sr0,2MnO3 and Ce0,8Sm0,2O1,9 were obtained by modified Pechini method by use of gelatin which act as polymerization agent. The powders obtained were characterized by Xray fluorescence, X ray diffraction, electronic scanning microscopy and the superficial area by BET method. The results obtained by X-ray fluorescence showed that the route adopted for obtention of powders was effective in the obtention of the compositions with close values to the stoichiometrics. Ethyl cellulose was used as pore-forming agent and mixed with the LSM-SDC powders in weight proportions of 1:24, 2:23 and 1:9. The films were sintered at 1150 °C for 4 h and characterized by X-ray diffraction and scanning electron microscopy technique (SEM) and atomic force. The phases quantification of the precursory powders and of the obtained films was carried through Rietveld method. According with the analysis of SEM, as the content of ethyl cellulose was increased, the pore distribution in films become more uniform and the pore size reduced. The methodology used for the obtention of the films was very efficient, considering a material was obtained with characteristics that were proper to the application as electrolyte/cathode system to solid oxide fuel cells

Influência de fontes e modos de aplicação de nitrogênio nos componentes da produção e produtividade do milho irrigado no cerrado

O objetivo do trabalho foi comparar os efeitos de fontes nitrogenadas: sulfonitrato de amônio com inibidor de nitrificação, sulfato de amônio e uréia, aplicadas na semeadura e/ou em cobertura, sobre teores de N foliar e clorofila, componentes da produção e produtividade do milho no verão, na região de cerrado sob irrigação. O trabalho foi desenvolvido em Latossolo Vermelho Distroférrico, nos anos agrícolas de 2006/2007 e 2007/2008. O delineamento experimental utilizado foi em blocos casualizados com quatro repetições, em esquema fatorial 3x5, sendo: três fontes de nitrogênio aplicadas na semeadura e/ou em cobertura, no estádio de 8 folhas completamente desdobradas, em 5 modos de aplicação (0 + 120; 30 + 90; 60 + 60; 90 + 30 e 120 + 0 kg ha-1 de N). O sulfonitrato de amônio + inibidor de nitrificação difere em relação ao sulfato de amônio quantos aos componentes da produção do milho cultivado no verão, independentemente da época de aplicação. A aplicação de 120 kg ha-1 de nitrogênio usando a uréia em aplicação única no estádio de oito folhas na cultura do milho e em períodos com alta precipitação pluvial afeta negativamente os teores foliares de N no milho e resulta em menor produtividade de grãos em relação à aplicação da mesma dose na semeadura.

Componentes de produção e produtividade de grãos de arroz de sequeiro em função do espaçamento e da densidade de semeadura

O presente trabalho teve por objetivo estudar três espaçamentos entre fileiras (30, 40 e 50 cm) e três densidades de semeadura (100, 150 e 200 sementes viáveis/m2) quanto a fenologia da planta, os componentes da produção e a produtividade de grãos do arroz de sequeiro cv. IAC 201. Desta forma, foi instalado um experimento em condições de campo, em um Latossolo Vermelho escuro, epi-eutrófico, textura argilosa, em Selvíria, MS. A redução do espaçamento entre fileiras aumentou o número de colmos e de panículas. O aumento da densidade de semeadura reduziu o perfilhamento por planta. A densidade de 100 sementes/m2 é mais adequada para o cultivar IAC 201. em cultivo de sequeiro sob alta precipitação e boa distribuição pluvial, o espaçamento de 30 cm entre fileiras de plantas, proporcionou maior produtividade de grãos do cultivar IAC 201 de arroz.

Influência do pré-aquecimento na adaptação marginal de dois materiais seladores de fóssulas e fissuras, analisada através de tomografia de coerência ótica

Among the non-invasive techniques employed in the prevention of caries highlights the sealing pits and fissures which is a conservative maneuver, in order to obliterate them to protect them from attack acid bacteria. Influenced by the studies of pre-heating composite resin, which has experienced great improvement in some of their physical properties, this study aimed to evaluate in vitro the superficial and internal marginal adaptation of different materials and sealants in pre-heating or not. A total of 40 extracted human third molars (n=10) that had their occlusal surfaces prepared to receive sealant. We tested two types of sealing materials: resin sealant (Fluoroshield) and low-viscosity resin (Permaflo), where 50% of previously received heated material and the other half received sealant material at room temperature. All samples were subjected to thermal cycling and pH, simulating a cariogenic oral environment, and later were analyzed appliance OCT (optical coherence tomography). The images obtained alterations were recorded and analyzed statistically. Change was considered as the emergence of bubbles, gaps and cracks in the sealant. Comparisons of the same material, assessing the fact that it is not sealed or preheated material, as well as comparisons between different materials subjected to the same temperature were carried out. The nonparametric Tukey test was used (p < 0,05). The results showed that there was statistically significant difference between both the materials analyzed, as between the situations in which the sealant material was submitted (preheated or not). On the issue of marginal adaptation and internal surface, seen through Optical coherence tomography, may suggest that there is a difference between the use of one type or another of the sealing material analyzed, with superiority attributed to resin Permaflo compared to sealant Fluroshield, telling is the same for the different techniques used

Correlação linear e espacial dos componentes de produção e produtividade da soja

The soybean is the crop most cultivated in Brazil, with great socioeconomic importance. In the agriculture year 2008/09 in Selviria County, Mato Grosso do Sul State, in the Brazilian Savannah, was analyzed the production components and the soybean yield cultivated in a Typic Acrustox on no-tillage. The main purpose objective was select among the production components number of pods per plant, number of grains per pod, number of grains per plant, mass of a thousand grains, mass of grains per plant and population of plants, which of the best linear and spatial correlation aiming explain the soybean yield variability. The irregular geostatistical grid was installed to collect of data, with 120 sampling points, in an area of 8.34 ha. The values of spatial dependence range to be utilized should be among 38.1 and 114.7 meters. The model of the adjusted semivariograma was predominantly the spherical. of the lineal and spatial point of view, the number of pods per plant and the mass of grains per plant they were correlated in a direct way with the soybean yield, demonstrating be the best components to esteem her.

Correlação linear entre componentes da produção e produtividade do arroz de terras altas em sistema plantio direto

The rice is one of the main sources of the humanity's feeding. During the agricultural year 2009/2010, in Selviria County, Mato Grosso do Sul State, in the Brazilian Savannah, an experiment was installed with rice upland in a Dystropherric Red Latosol (Typic Acrustox) under no-tillage, irrigated by central pivot, with the purpose of selecting the best components production to explain the variability the irrigated rice yield upland. The geostatistical grid was installed, to collect the data, with 120 sampling points, in an area of 3.0 ha and and homogeneous slope of 0.055 m m(-1). The medium rice yield was of the 5980 kg ha(-1). For the simple lineal regressions, the number of spikelets grenades for panicle presented the best direct potential correlation with the yield rice, given for: PGO = 115,5.NEG(0,770). However, for the multiple lineal regressions, the equation equacao PGO = 2754,30-411,55.NEG-461,07. NEC+436,59. NET it was the one that better she came to esteem the yield rice. However, spatial, it was not possible to establish correlation between the yield rice and the components production, once none of those it presented spatial dependence in their data.

Produtividade e componentes da produção do amendoim da seca em razão da época de semeadura e da aplicação de cálcio

Este trabalho teve por objetivo estudar o efeito do calcário, como fornecedor de cálcio, em diferentes épocas de semeadura, na cultura do amendoim cultivar Tatu, sobre os componentes da produção e a produtividade de vagens em semeadura na época considerada seca. O experimento foi conduzido em um Latossolo Vermelho-Escuro, argiloso, em Selvíria, MS. Foram estudadas quatro épocas de semeadura do amendoim da seca (21/1, 4/2, 18/2 e 4/3), combinadas com quatro doses de Ca (0, 45, 90 e 135 kg ha-1 de Ca), aplicadas no sulco de semeadura, usando como fonte calcário dolomítico com PRNT de 90,1% e com teores de 21% de CaO e 18% de MgO. Foram avaliados o número de vagens por planta, o número de grãos por vagem e por planta, o peso de 100 grãos, o rendimento e a produtividade das vagens. Conclui-se que: 1) à medida que se atrasa a semeadura, há a probabilidade de ocorrer deficiência hídrica nos períodos vegetativo e reprodutivo, reduzindo a produtividade do amendoim da seca; 2) há boa produtividade de vagens quando a semeadura é realizada até o início do mês de fevereiro; 3) a resposta do amendoim da seca ao Ca é baixa em solos onde inicialmente se tem alto teor de Ca e saturação por bases considerada média, principalmente, quando a disponibilidade hídrica também é um fator limitante; 4) a aplicação de calcário no sulco de semeadura como meio de fornecimento de Ca para a cultura do amendoim é uma prática viável.

Componentes do rendimento e desenvolvimento do feijoeiro de porte ereto sob diferentes densidades populacionais

O presente trabalho teve por objetivo verificar a influência de densidades populacionais com variação de 133,3 mil a 533,3 mil plantas por hectare, distribuídas em diferentes espaçamentos entrelinhas (0,30 m; 0,45 m e 0,60 m) e número de plantas na linha de semeadura (8, 12 e 16 plantas por metro linear), em componentes do rendimento e no desenvolvimento do feijoeiro (Phaseolus vulgaris L.), cultivares IAC-Carioca Pyatã e IAC-Bico de Ouro, de porte semi-ereto a ereto, cultivados sob irrigação no inverno (maio a agosto de 1995), em Selvíria (MS). Obteve-se uma redução do número de vagens e do número de grãos por planta com o aumento da densidade de semeadura por metro linear, ou com a diminuição do espaçamento entrelinhas. Com esse espaçamento reduzido houve um efeito compensatório no rendimento de grãos, devido ao aumento da população de plantas por área, e à maior massa de sementes. Para os cultivares de porte semi-ereto a ereto obtiveram-se maiores rendimentos em grãos na densidade populacional de 266,7 mil plantas por hectare, utilizando-se o espaçamento de 0,30 m entrelinhas e oito plantas por metro linear.

Desempenho de escolares na adaptação brasileira da avaliação dos processos de leitura

TEMA: adaptação brasileira da avaliação dos processos de leitura (Prolec). OBJETIVO: caracterizar e comparar o desempenho de escolares do ensino básico público e privado de 1ª a 4ª séries na adaptação brasileira da avaliação dos Processos de Leitura (Prolec). MÉTODO: participaram deste estudo 262 escolares da 1ª à 4ª série do ensino básico, distribuídos em: Grupo I (GI), composto por 122 escolares de escola pública municipal e Grupo II (GII), composto por 140 escolares de escola particular. Como procedimento, aplicou-se a adaptação brasileira das provas de avaliação do Prolec. RESULTADOS: os resultados revelaram que o GII apresentou desempenho superior em provas de identificação de som, decisão lexical, leitura de palavras, leitura de palavras de baixa frequência, leitura de pseudo-palavras, compreensão de orações e compreensão de textos. Tanto os escolares do GI como do GII apresentaram desempenho abaixo da pontuação esperada nas provas do PROLEC na versão espanhola. CONCLUSÃO: a adaptação do Prolec para a realidade brasileira mostrou-se adequada para o estabelecimento de perfil de leitura nos escolares de ensino público e particular em fase inicial de alfabetização.

Avalição de reusabilidade de aplicações web baseadas em frameworks orientados a ações e a componentes: estudo de Caso sobre os Frameworks Apache Struts e JavaServer Faces

Over the years the use of application frameworks designed for the View and Controller layers of MVC architectural pattern adapted to web applications has become very popular. These frameworks are classified into Actions Oriented and Components Oriented , according to the solution strategy adopted by the tools. The choice of such strategy leads the system architecture design to acquire non-functional characteristics caused by the way the framework influences the developer to implement the system. The components reusability is one of those characteristics and plays a very important role for development activities such as system evolution and maintenance. The work of this dissertation consists to analyze of how the reusability could be influenced by the Web frameworks usage. To accomplish this, small academic management applications were developed using the latest versions of Apache Struts and JavaServer Faces frameworks, the main representatives of Java plataform Web frameworks of. For this assessment was used a software quality model that associates internal attributes, which can be measured objectively, to the characteristics in question. These attributes and metrics defined for the model were based on some work related discussed in the document

Uma abordagem na camada de middleware para troca dinâmica de componentes em sistemas multimídia distribuídos baseados no framework Cosmos

To manage the complexity associated with the management of multimedia distributed systems, a solution must incorporate concepts of middleware in order to hide specific hardware and operating systems aspects. Applications in these systems can be implemented in different types of platforms, and the components of these systems must interact each with the other. Because of the variability of the state of the platforms implementation, a flexible approach should allow dynamic substitution of components in order to ensure the level of QoS of the running application . In this context, this work presents an approach in the layer of middleware that we are proposing for supporting dynamic substitution of components in the context the Cosmos framework , starting with the choice of target component, rising taking the decision, which, among components candidates will be chosen and concluding with the process defined for the exchange. The approach was defined considering the Cosmos QoS model and how it deals with dynamic reconfiguration

Uma abordagem dirigida por modelos para desenvolvimento de middlewares auto-adaptativos para transmissão de fluxo de dados baseado em restrições de QoS

The use of middleware technology in various types of systems, in order to abstract low-level details related to the distribution of application logic, is increasingly common. Among several systems that can be benefited from using these components, we highlight the distributed systems, where it is necessary to allow communications between software components located on different physical machines. An important issue related to the communication between distributed components is the provision of mechanisms for managing the quality of service. This work presents a metamodel for modeling middlewares based on components in order to provide to an application the abstraction of a communication between components involved in a data stream, regardless their location. Another feature of the metamodel is the possibility of self-adaptation related to the communication mechanism, either by updating the values of its configuration parameters, or by its replacement by another mechanism, in case of the restrictions of quality of service specified are not being guaranteed. In this respect, it is planned the monitoring of the communication state (application of techniques like feedback control loop), analyzing performance metrics related. The paradigm of Model Driven Development was used to generate the implementation of a middleware that will serve as proof of concept of the metamodel, and the configuration and reconfiguration policies related to the dynamic adaptation processes. In this sense was defined the metamodel associated to the process of a communication configuration. The MDD application also corresponds to the definition of the following transformations: the architectural model of the middleware in Java code, and the configuration model to XML

MoSAC: um módulo para seleção de configurações arquiteturais baseado em critérios de QoS no contexto de sistema distribuídos autoadaptativos

The process for choosing the best components to build systems has become increasingly complex. It becomes more critical if it was need to consider many combinations of components in the context of an architectural configuration. These circumstances occur, mainly, when we have to deal with systems involving critical requirements, such as the timing constraints in distributed multimedia systems, the network bandwidth in mobile applications or even the reliability in real-time systems. This work proposes a process of dynamic selection of architectural configurations based on non-functional requirements criteria of the system, which can be used during a dynamic adaptation. This proposal uses the MAUT theory (Multi-Attribute Utility Theory) for decision making from a finite set of possibilities, which involve multiple criteria to be analyzed. Additionally, it was proposed a metamodel which can be used to describe the application s requirements in terms of the non-functional requirements criteria and their expected values, to express them in order to make the selection of the desired configuration. As a proof of concept, it was implemented a module that performs the dynamic choice of configurations, the MoSAC. This module was implemented using a component-based development approach (CBD), performing a selection of architectural configurations based on the proposed selection process involving multiple criteria. This work also presents a case study where an application was developed in the context of Digital TV to evaluate the time spent on the module to return a valid configuration to be used in a middleware with autoadaptative features, the middleware AdaptTV

KitSmart: Uma biblioteca de componentes para o desenvolvimento rigoroso de aplicações Java Card com o método B

The development of smart card applications requires a high level of reliability. Formal methods provide means for this reliability to be achieved. The BSmart method and tool contribute to the development of smart card applications with the support of the B method, generating Java Card code from B specifications. For the development with BSmart to be effectively rigorous without overloading the user it is important to have a library of reusable components built in B. The goal of KitSmart is to provide this support. A first research about the composition of this library was a graduation work from Universidade Federal do Rio Grande do Norte, made by Thiago Dutra in 2006. This first version of the kit resulted in a specification of Java Card primitive types byte, short and boolean in B and the creation of reusable components for application development. This work provides an improvement of KitSmart with the addition of API Java Card specification made in B and a guide for the creation of new components. The API Java Card in B, besides being available to be used for development of applications, is also useful as a documentation of each API class. The reusable components correspond to modules to manipulate specific structures, such as date and time. These structures are not available for B or Java Card. These components for Java Card are generated from specifications formally verified in B. The guide contains quick reference on how to specify some structures and how some situations were adapted from object-orientation to the B Method. This work was evaluated through a case study made through the BSmart tool, that makes use of the KitSmart library. In this case study, it is possible to see the contribution of the components in a B specification. This kit should be useful for B method users and Java Card application developers

Um modelo de interconexão de componentes para ambientes mulitmídia distribuídos

Multimedia systems must incorporate middleware concepts in order to abstract hardware and operational systems issues. Applications in those systems may be executed in different kinds of platforms, and their components need to communicate with each other. In this context, it is needed the definition of specific communication mechanisms for the transmission of information flow. This work presents a interconnection component model for distributed multimedia environments, and its implementation details. The model offers specific communication mechanisms for transmission of information flow between software components considering the Cosmos framework requirements in order to support component dynamic reconfiguration