Dynamic range extension of SiPM detectors with the time-gated operation

The silicon photomultiplier (SiPM) is a novel detector technology that has undergone a fast development in the last few years, owing to its single-photon resolution and ultra-fast response time. However, the typical high dark count rates of the sensor may prevent the detection of low intensity radiation fluxes. In this article, the time-gated operation with short active periods in the nanosecond range is proposed as a solution to reduce the number of cells fired due to noise and thus increase the dynamic range. The technique is aimed at application fields that function under a trigger command, such as gated fluorescence lifetime imaging microscopy.

Inferring the mode of origin of polyploid species from next-generation sequence data.

Many eukaryote organisms are polyploid. However, despite their importance, evolutionary inference of polyploid origins and modes of inheritance has been limited by a need for analyses of allele segregation at multiple loci using crosses. The increasing availability of sequence data for nonmodel species now allows the application of established approaches for the analysis of genomic data in polyploids. Here, we ask whether approximate Bayesian computation (ABC), applied to realistic traditional and next-generation sequence data, allows correct inference of the evolutionary and demographic history of polyploids. Using simulations, we evaluate the robustness of evolutionary inference by ABC for tetraploid species as a function of the number of individuals and loci sampled, and the presence or absence of an outgroup. We find that ABC adequately retrieves the recent evolutionary history of polyploid species on the basis of both old and new sequencing technologies. The application of ABC to sequence data from diploid and polyploid species of the plant genus Capsella confirms its utility. Our analysis strongly supports an allopolyploid origin of C. bursa-pastoris about 80 000 years ago. This conclusion runs contrary to previous findings based on the same data set but using an alternative approach and is in agreement with recent findings based on whole-genome sequencing. Our results indicate that ABC is a promising and powerful method for revealing the evolution of polyploid species, without the need to attribute alleles to a homeologous chromosome pair. The approach can readily be extended to more complex scenarios involving higher ploidy levels.

Budget de l'État. Mode de présentation . [Décret du 19 juin 1956 du Ministre des affaires économiques et financières, déterminant le mode de présentation du budget de l'État.]

[Code]

Performance Characteristics of an Axial-Flux Solid-Rotor-Core Induction Motor

The integration of electric motors and industrial appliances such as pumps, fans, and compressors is rapidly increasing. For instance, the integration of an electric motor and a centrifugal pump provides cost savings and improved performance characteristics. Material cost savings are achieved when an electric motor is integrated into the shaft of a centrifugal pump, and the motor utilizes the bearings of the pump. This arrangement leads to a smaller configuration that occupies less floor space. The performance characteristics of a pump drive can be improved by using the variable-speed technology. This enables the full speed control of the drive and the absence of a mechanical gearbox and couplers. When using rotational speeds higher than those that can be directly achieved by the network frequency the structure of the rotor has to be mechanically durable. In this thesis the performance characteristics of an axial-flux solid-rotor-core induction motor are determined. The motor studied is a one-rotor-one-stator axial-flux induction motor, and thus, there is only one air-gap between the rotor and the stator. The motor was designed for higher rotational speeds, and therefore a good mechanical strength of the solid-rotor-core rotor is required to withstand the mechanical stresses. The construction of the rotor and the high rotational speeds together produce a feature, which is not typical of traditional induction motors: the dominating loss component of the motor is the rotor eddy current loss. In the case of a typical industrial induction motor instead the dominating loss component is the stator copper loss. In this thesis, several methods to decrease the rotor eddy current losses in the case of axial-flux induction motors are presented. A prototype motor with 45 kW output power at 6000 min-1 was designed and constructed for ascertaining the results obtained from the numerical FEM calculations. In general, this thesis concentrates on the methods for improving the electromagnetic properties of an axial-flux solid-rotor-core induction motor and examines the methods for decreasing the harmonic eddy currents of the rotor. The target is to improve the efficiency of the motor and to reach the efficiency standard of the present-day industrial induction motors equipped with laminated rotors.

DFMA- Analysis and Aspects of Applying Internet Based Collaborative Design for Axial Eccentric Oil-Pump Design

The integrated system of design for manufacturing and assembly (DFMA) and internet based collaborative design are presented to support product design, manufacturing process, and assembly planning for axial eccentric oil-pump design. The presented system manages and schedules group oriented collaborative activities. The design guidelines of internet based collaborative design & DFMA are expressed. The components and the manufacturing stages of axial eccentric oil-pump are expressed in detail. The file formats of the presented system include the data types of collaborative design of the product, assembly design, assembly planning and assembly system design. Product design and assembly planning can be operated synchronously and intelligently and they are integrated under the condition of internet based collaborative design and DFMA. The technologies of collaborative modelling, collaborative manufacturing, and internet based collaborative assembly for the specific pump construction are developed. A seven-security level is presented to ensure the security of the internet based collaborative design system.

The evolution ofRussian power industry from monopoly to market operation

ei

Space-time front-ends for RAKE receivers in the FDD mode of UTRA

A unified and general vision of different space-time processors is presented. Many popular receivers can beaccomodated, like V-RAKE receivers, weighted V-RAKE, or spatial narrowband beamforming. By makingappropriate assumptions on the space/time characteristic of the interference it is possible to enhance theperformance of the receiver through spatial/temporal pre-processors. These receivers will be tested in the FDDmode of UTRA.

Size and fat content of gynes in relation to the mode of colony founding in ants (Hymenoptera; Formicidae)

In ants, there are two main processes of colony founding, the independent and the dependent modes. In the first case young queens start colony founding without the help of workers, whereas in the second case they are accompanied by workers. To determine the relation between the mode of colony founding and the physiology of queens, we collected mature gynes of 24 ant species. Mature gynes of species utilizing independent colony founding had a far higher relative fat content than gynes of species employing dependent colony founding. These fat reserves are stored during the period of maturation, i.e. between the time of emergence and mating, and serve as fuel during the time of colony founding to nurture the queen and the brood. Gynes of species founding independently but non claustrally were found to have a relative fat content intermediate between the values found for gynes founding independently and those founding dependently. This suggests that such gynes rely partially on their fat reserves and partially on the energy provided by prey they collect to nurture themselves and the first brood during the time of colony founding. Study of the fat content of mature gynes of all species has shown that it gives a good indication of the mode of colony founding.

Managing Subsidiary Integration During Corporate Expansion in Russia

Kansallisten rajojen yli laajentuvat yritykset kohtaavat kasvavia paineita yhtenäistää eri yksiköiden toimintatapoja, prosesseja ja järjestelmiä. Hyvin toteutettuna organisaation sisäinen integrointi voi johtaa tytäryritysten tuottavuuden parantumiseen ja strategisiin mittakaavaetuihin, kun taas huonosti toteutettuna integrointi voi johtaa lisääntyviin konflikteihin ja emoyhtiön kontrollin katoamiseen. Integroinnin kannalta Venäjälle perustettavat tytäryritykset asettavat suuria haasteita. Kasvava ja kehittyvä kansantalous on jatkuvassa muutoksessa kohti edistyneempiä ja tuottavampia toimintamalleja, mutta toisaalta yritystoiminnantaustalla vaikuttaa edelleenkin Neuvostoajan perinnöt, jotka muokkaavat yritysten johtamisrakenteita ja prosesseja. Nämä taustavaikuttajat vaikeuttavat kansainvälisen yrityksen yhtenäistämistä, mutta toisaalta tarjoavat suuria mahdollisuuksia yrityksille, jotka oppivat elämään Venäjän markkinoiden ehdoilla. Tämä tutkimus käyttää apunaan konstruktiivista tutkimustyötä ratkoakseenYIT:n Venäjälle perustettavien yritysten integrointiin liittyviä ongelmia ja mahdollisuuksia. Työn lopputuloksena syntyy oppimiseen pohjautuva integraatiostrategia ja tätä strategiaa tukeva integroinnin johtamisjärjestelmä.

Kulutusosapalvelun hinnoittelumallin kehittäminen

Tämä diplomityö käsittelee paperikoneiden kulutusosapalvelua tarjoavan yrityksen hinnoittelumallin kehittämistä haastavassa toimintaympäristössä, jossa kilpailu on kiristynyt ja asiakkaat ovat muuttuneet entistä hintatietoisemmiksi. Työn tavoitteena on kehittää kulutusosapalvelulle hinnoittelumalli ja pohtia ¤/tuotettu paperitonni (¤/tonni)-hinnoittelun soveltuvuutta paperikoneiden kulutusosapalvelua toimittaville yrityksille. ¤/tonni-hinnoittelussalähtökohta on asiakkaalle tuotettu hyöty; kuinka paljon paperia kulutusosilla pystytään tuottamaan. ¤/tonni-hinnoittelua tarkastellaan tarkemmin esimerkkiasiakkaiden avulla, joiden tehtailla toimintatavat kulutusosapalveluun liittyen vaihtelevat. Tavoitteena on selvittää kulutusosapalvelun ¤/tonni-kustannukset eri toimintatavoissa kulutusosapalveluita tarjoavan yrityksen sekä asiakkaan näkökulmasta. Työssä selvitetään kuinka eri toimintatapojen ja asiakkaiden kannattavuus vaihtelee kulutusosapalveluita tarjoavan yrityksen kannalta, jamikä toimintamalli on edullisin asiakkaan kannalta. Kehitettävän hinnoittelumallin avulla analysoidaan, kuinka paljon hyötyä kulutusosapalveluita tarjoava yritys tarjoaa asiakkailleen palveluillaan. Kulutusosapalvelu jaetaan kolmeen selvitettävään kustannuskomponenttiin; kulutusosa-, logistiikka- ja laadun puutekustannuksiin. Työn teoreettinen osa koostuu kirjallisuustutkimuksesta liittyen hinnoitteluun, hinnoittelumalleihin ja hinnoittelusopimuksiin. Työnempiirinen osa perustuu haastatteluihin ja sisäisten tietojärjestelmien tietoihin. Kirjallisuustutkimuksen, haastattelujen ja kohdeyrityksen sisäisen materiaalin avulla mallinnetaan loogismatemaattisesti taulukkolaskentasovellus, ¤/tonni-hinnoittelumalli. Työn keskeiset tulokset liittyvät siihen, mitä asioita tulee huomioida ¤/tonni-hinnoittelusopimusta asiakkaan kanssa tehtäessä, miten ¤/tonni-kustannukset vaihtelevat eri toimintavoissa ja kuinka hinnoittelumallin kehittämistä kannattaa edelleen jatkaa.