Analytical Assessment of a Home Made Capillary Electrophoresis Equipment with Linear Charge Coupled Device for Visible Light Absorption Detection in the Determination of Food Dyes

The performance of modular home made capillary electrophoresis equipment with spectrophotometric detection, at a visible region by means of a miniaturized linear charge coupled device, was evaluated for the determination of four food dyes. This system presents a simple but efficient home made cell detection scheme. A computer program that converts the spectral data after each run into the electropherograms was developed to evaluate the analytical parameters. The dyes selected for analytical evaluation of the system were Brilliant Blue FCF, Fast Green FCF, Sunset Yellow FCF, and Amaranth. Separation was carried out in a 29cm length and 75 mu m I.D fused silica capillary, using 10mmolL-1 borate buffer at pH 9, with separation voltage of 7.5kV. The detection limits for the dyes were between 0.3 and 1.5mgL-1 and the method presented adequate linearity over the ranges studied, with correlation coefficients greater than 0.99. The method was applied for determination and quantification of these dyes in fruit juices and candies.

Comparison of the analytical performance of electrophoresis microchannels fabricated in PDMS, glass, and polyester-toner

This paper compares the analytical performance of microchannels fabricated in PDMS, glass, and polyester-toner for electrophoretic separations. Glass and PDMS chips were fabricated using well-established photolithographic and replica-molding procedures, respectively. PDMS channels were sealed against three different types of materials: native PDMS, plasma-oxidized PDMS, and glass. Polyester-toner chips were micromachined by a direct-printing process using an office laser printer. All microchannels were fabricated with similar dimensions according to the limitations of the direct-printing process (width/depth 150 mu m/12 mu m). LIF was employed for detection to rule out any losses in separation efficiency due to the detector configuration. Two fluorescent dyes, coumarin and fluorescein, were used as model analytes. Devices were evaluated for the following parameters related to electrophoretic separations: EOF, heat dissipation, injection reproducibility, separation efficiency, and adsorption to channel wall.

Product verification and defect repair - status and considerations

Product verifications have become a cost-intensive and time-consuming aspect of modern electronics production, but with the onset of an ever-increasing miniaturisation, these aspects will become even more cumbersome. One may also go as far as to point out that certain precision assembly, such as within the biomedical sector, is legally bound to have 0 defects within production. Since miniaturisation and precision assembly will soon become a part of almost any product, the verifications phases of assembly need to be optimised in both functionality and cost. Another aspect relates to the stability and robustness of processes, a pre-requisite for flexibility. Furthermore, as the re-engineering cycle becomes ever more important, all information gathered within the ongoing process becomes vital. In view of these points, product, or process verification may be assumed to be an important and integral part of precision assembly. In this paper, product verification is defined as the process of determining whether or not the products, at a given phase in the life-cycle, fulfil the established specifications. Since the product is given its final form and function in the assembly, the product verification normally takes place somewhere in the assembly line which is the focus for this paper.

Investigation of Iron (III) desferrioxamine B oxalate ligand exchange by UV-vis spectroscopy: the next step in developing a quantitative analytical method for measuring bioavailable iron in marine ecosystems

To date there are no analytical techniques designed to exclusively measure bioavailable iron in marine environments. The goal of this research is to develop such a technique by isolating the bioavailable iron using the terrestrial siderophore desferrioxamine B (DFB). This project contained many challenging aspects, but the specific goal of this study was to develop a robust analytical technique for quantification of Fe(III)-DFB complexes at nanomolar concentrations. Past work showed that oxalate (Ox) promotes photodissociation of Fe(III)-DFB to Fe(Il), and we are specifically interested in the mechanism of this process. A model was developed using known thermodynamic constants for Fe(III)-DFB and Fe(III) oxalato complexes and adjusting for ionic strength. The model was confirmed by monitoring the UV-VIS absorbance of the system at a variety of oxalate concentrations and pH. The model did not include ternary complexes. Next., the rate of Fe(1I) production during UV irradiation was examined. The results showed that the rate of Fe(II) production was based entirely on the [Fe(Ox)?]3- speciation, and that reoxidation of Fe(II) occurred via reactive oxygen intermediates. This reoxidation could be avoided by either decreasing the oxygen concentration or by adding a Fe(II) stabilizing reagent, such as ferrozine. Further studies need to be done to confirm that these results apply at sub nanomolar concentrations, and the issue of Fe(II) reoxidation at lower Fe concentrations needs to be addressed.

The diversity of diversity: further methodological considerations on the use of the concept in cultural economics

The implications of diversity still raise confusion in the cultural debate. We address them from both a formal and conceptual viewpoints, putting in check the validity of some arguments. We conclude that: measuring diversity demands key decisions and careful statistical procedures; ignorance on optimal diversity levels and on ways to generate them is widespread in the cultural field; there is no support for cultural diversity as something associated to fair economic and political systems; restriction to sheer economics requires the establishment of links between diversity and measurable properties – something rather incipient. Diversity, as a social choice, should be distinguished from it as an economic value.

The Brazilian 1994 stabilization plan: an analytical view

The Real Plan has succeeded in stabilizing the Brazilian inflation. The consumer price inflation has been reduced from 11260 percent per year, in June 1994, to an estimate of 8 percent in 1997. The lower inflation resulted in a remarkable income distribution, and in an increased private consumption. The plan managed to control the inflationary effects of the increased demand with some traditional measures: A more liberalized economy, a moving (and overvalued) exchange rate band, high interest rate differentials, and a tight domestic credit policy. The government has, so far failed to accomplish the fiscal adjustment. The price stabilization has largely depended on the current account deficit. However, macroeconomic indicators do not present reasons for concern about the current account sustainability, in the medium-run. The economy may be trapped in a low-growth vicious cycle, represented by a stop-and-go trend, due to the two-way endogencity between domestic saving and growth. Economic growth depends on policies in increase the public sector saving, to secure the privatization of the State enterprises, and to promote investments. The major problem for the government action is, as always, in the political sphere. Approximately 80 percent of the Central Government net revenue are allocated to the social sectors. Consequently, the fiscal reform will hue to deal with the problem of re-designing the public sector’s intervention in the social area. Most probably, it will be inevitable to cut the social area budget. This is politically unpleasant.

Os gêneros Nicotiana L., Bouchetia Dunal e Nierembergia Ruiz & Pav.(Solanaceae) no Rio Grande do Sul, Brasil

Os gêneros Nicotiana L., Bouchetia Dunal e Nierembergia Ruiz & Pav. da tribo Nicotianeae G.Don (Solanaceae), presentes no estado do Rio Grande do Sul, apresentam diversas características em comum, como o hábito predominantemente herbáceo, fruto seco, capsular, com numerosas sementes. Estes gêneros distinguem-se basicamente por Nicotiana apresentar prefloração geralmente contorcido-conduplicada ou conduplicada, corola infundibuliforme, tubular ou hipocrateriforme, anteras dorsifixas e um disco nectarífero presente, enquanto que Bouchetia e Nierembergia apresentam prefloração imbricadoconduplicada ou imbricada e anteras ventrifixas. Em Bouchetia a corola é campanulado-infundibuliforme e um disco nectarífero está presente, enquanto que em Nierembergia a corola é hipocrateriforme e o disco nectarífero está ausente. O gênero Nicotiana, da subtribo Nicotianineae, está representado no Estado por seis espécies nativas: N. alata Link & Otto, N. bonariensis Lehm., N. forgetiana Hemsl., N. langsdorffii Weinm., N. longiflora Cav. e N. mutabilis Stehmann & Semir. Duas outras espécies, provavelmente originárias da Argentina, são também encontradas no Estado: N. glauca Graham, que ocorre de forma ruderal ou cultivada e N. tabacum L., também cultivada, de importância econômica por ser fonte de matéria prima para a indústria do fumo. A única espécie do gênero Bouchetia, presente no Estado, é Bouchetia anomala (Miers) Britton & Rusby, endêmica da região sul do Brasil, Uruguai, Paraguai e nordeste da Argentina. Pertence à subtribo Nierembergiinae Hunz., junto com Nierembergia, com quem apresenta maior afinidade. Nierembergia está representado no Rio Grande do Sul por cinco espécies nativas: N. linariifolia Graham, N. micrantha Cabrera, N. pinifolia Miers, N. riograndensis Hunz. & A.A.Cocucci e N. scoparia Sendtn. Chaves analíticas para identificação dos gêneros da tribo Nicotianeae G.Don e para os da subtribo Nierembergiinae, assim como para as espécies de Nicotiana, Bouchetia e Nierembergia, são apresentadas. Descrições para os três gêneros e suas espécies, ilustrações, mapas de distribuição geográfica no Estado, considerações quanto ao hábitat, observações sobre a fenologia, variabilidade morfológica e outros comentários também são referidos.

Poder local: probabilidades e limites da administração municipal participante

O presente estudo se localiza no espaço destinado a com preensão do papel da política municipal circunscrito ao caso brasileiro. Busca trabalhar o conceito de poder local, o qual atualmente já se encontra um pouco mais difundido nas análises sobre a dinâmica do poder exercido nos municípios. Além de tentar construir uma discussão explicativa sobre poder local e os diversos ternas articulados no seu questionamento, este trabalho pretende também compreender a tentativa de viabilização do poder local através da proposta do exercício participativo ou da gestão participativa do município. Constitui um exercício dialético de base empírica e teórica visando captar as possibilidades e os limites existentes no seio dessa proposta. A característica essencial do presente estudo ~ sua in tenção de compartilhar do campo de reflexão dos projetos e propostas de educação a partir do município tendo em vista a construção de urna escola democrática. Como compreender, planejar e avaliar o processo político-ideológico de ensino-aprendizagem desenvolvido na rede de educação municipal se não houver uma inquietação sobre o papel da escola, assim como a configuração da sua função na esfera municipal? É desejo deste trabalho favorecer esta compreensão, contribuindo com subsídios aos profissionais da área político-educativa. Quanto à abrangência desta pesquisa, integra seu campo analítico as seguintes dimensões: quadro teórico da instância local de poder e dos temas articulados a esta questão, descrição de experiências de gestão municipal com tendência participativa, considerações sobre a proposta de participação da gestão municipal e observações finais sobre as possibilidades e os limites contidos neste tipo de proposta. De maneira mais direta, esta dissertação significa uma tentativa de apresentar um quadro inicial de referências sobre esta ampla problemática em pauta para um posterior amadurecimento.

The influence of the supply chain agents on the new product development's performance: an analysis based on the multi-group moderation

Este estudo buscou verificar a influencia dos agentes da cadeia de suprimentos no desempenho do desenvolvimento de novos produtos quando os agentes são analisados em conjunto. A motivação desta pesquisa veio de estudos que alertaram para a consideração da integração da cadeia de suprimentos como um constructo multidimensional, englobando o envolvimento da manufatura, fornecedores e clientes no desenvolvimento de novos produtos; e devido à falta de informação sobre as influencias individuais destes agentes no desenvolvimento de novos produtos. Sob essas considerações, buscou-se construir um modelo analítico baseado na Teoria do Capital Social e Capacidade Absortiva, construir hipóteses a partir da revisão da literatura e conectar constructos como cooperação, envolvimento do fornecedor no desenvolvimento de novos produtos (DNP), envolvimento do cliente no DNP, envolvimento da manufatura no DNP, antecipação de novas tecnologias, melhoria contínua, desempenho operacional do DNP, desempenho de mercado do NPD e desempenho de negócio do DNP. Para testar as hipóteses foram consideradas três variáveis moderadoras, tais como turbulência ambiental (baixa, média e alta), indústria (eletrônicos, maquinários e equipamentos de transporte) e localização (América, Europa e Ásia). Para testar o modelo foram usados dados do projeto High Performance Manufacturing que contém 339 empresas das indústrias de eletrônicos, maquinários e equipamentos de transporte, localizadas em onze países. As hipóteses foram testadas por meio da Análise Fatorial Confirmatória (AFC) incluindo a moderação muti-grupo para as três variáveis moderadoras mencionadas anteriormente. Os principais resultados apontaram que as hipóteses relacionadas com cooperação foram confirmadas em ambientes de média turbulência, enquanto as hipóteses relacionadas ao desempenho no DNP foram confirmadas em ambientes de baixa turbulência ambiental e em países asiáticos. Adicionalmente, sob as mesmas condições, fornecedores, clientes e manufatura influenciam diferentemente no desempenho de novos produtos. Assim, o envolvimento de fornecedores influencia diretamente no desempenho operacional e indiretamente no desempenho de mercado e de negócio em baixos níveis de turbulência ambiental, na indústria de equipamentos de transporte em países da Americanos e Europeus. De igual forma, o envolvimento do cliente influenciou diretamente no desempenho operacional e indiretamente no desempenho de mercado e do negócio em médio nível de turbulência ambiental, na indústria de maquinários e em países Asiáticos. Fornecedores e clientes não influenciam diretamente no desempenho de mercado e do negócio e não influenciam indiretamente no desempenho operacional. O envolvimento da manufatura não influenciou nenhum tipo de desempenho do desenvolvimento de novos produtos em todos os cenários testados.

Analytical characterization of the aroma of Tinta Negra Mole red wine: Identification of the main odorants compounds

A method for the simultaneous determination of major and minor volatiles composition in different types (dry, medium dry, sweet and medium sweet) of a young Tinta Negra Mole (TNM) monovarietal red wine from 2003 harvest has been validated. Wine samples preparation includes a dichloromethane liquid–liquid extraction followed by concentration under a nitrogen atmosphere. The extracted fraction was analysed by gas chromatography–mass spectrometry and give quantitative information for more than 86 analytes whose concentration range from few μg l−1 to 259.1 mg l−1. The method enables high recovery of volatile compounds in wine good linearity with (r2) values higher than 0.980 and good sensitivity. The limits of detection range from 0.003 to 0.534 mg l−1 and limits of quantification from 0.009 to 1.170 mg l−1. The method allows satisfactory determination of more than 80 compounds in the TNM red wines. These wines are characterized by a high content of higher alcohols, ethyl esters, fatty acids and lactones. The levels of sulphur compounds in Tinta Negra Mole medium sweet wines are very low, but they have the highest concentration of carbonyl compounds. Quantitative analysis of the main odorants followed by the determination of aroma index allow us elucidate the aroma of these varieties. On the basis of their odour description and odour threshold, the most powerful odorants of Tinta Negra Mole wines were tentatively established.

Headspace solid-phase microextraction combined with mass spectrometry as a powerful analytical tool for profiling the terpenoid metabolomic pattern of hop-essential oil derived from Saaz variety

Hop(HumuluslupulusL.,Cannabaceaefamily)isprizedforitsessentialoilcontents,usedin beer production and, more recently, in biological and pharmacological applications. In this work,a methodinvolvingheadspace solid-phase microextractionand gas chromatography– mass spectrometry was developed and optimized to establish the terpenoid (monoterpenes and sesquiterpenes) metabolomic pattern of hop-essential oil derived from Saaz variety as a mean to explore this matrix as a powerful biological source for newer, more selective, biodegradable and naturally produced antimicrobial and antioxidant compounds. Different parameters affecting terpenoid metabolites extraction by headspace solid-phase microextraction were considered and optimized: type of fiber coatings, extraction temperature, extraction time, ionic strength, and sample agitation. In the optimized method, analytes were extracted for 30 min at 40 C in the sample headspace with a 50/30 m divinylbenzene/carboxen/polydimethylsiloxane coating fiber. The methodology allowed the identification of a total of 27 terpenoid metabolites, representing 92.5% of the total Saaz hop-essential oil volatile terpenoid composition. The headspace composition was dominated by monoterpenes (56.1%, 13 compounds), sesquiterpenes (34.9%, 10), oxygenated monoterpenes (1.41%, 3), and hemiterpenes (0.04%, 1) some of which can probably contribute to the hop of Saaz variety aroma. Mass spectrometry analysis revealed that the main metabolites are the monoterpene -myrcene (53.0±1.1% of the total volatile fraction), and the cyclic sesquiterpenes, -humulene (16.6 ± 0.8%), and -caryophyllene (14.7 ± 0.4%), which together represent about 80% of the total volatile fraction from the hop-essential oil. Thesefindingssuggestthatthismatrixcanbeexploredasapowerfulbiosourceofterpenoid metabolites.

Paradigms in health care and its relationship to the nursing theories: an analytical test

DANTAS, Rodrigo Assis Neves; NÓBREGA, Walkíria Gomes da; MORAIS FILHO, Luiz Alves; MACÊDO, Eurides Araújo Bezerra de ; FONSECA , Patrícia de Cássia Bezerra; ENDERS, Bertha Cruz; MENEZES, Rejane Maria Paiva de; TORRES , Gilson de Vasconcelos. Paradigms in health care and its relationship to the nursing theories: an analytical test . Revista de Enfermagem UFPE on line. v.4,n.2, p.16-24.abr/jun. 2010. Disponível em < http://www.ufpe.br/revistaenfermagem/index.php/revista>.