Underwater Target Localization, Tracking and Classification

Underwater target localization and tracking attracts tremendous research interest due to various impediments to the estimation task caused by the noisy ocean environment. This thesis envisages the implementation of a prototype automated system for underwater target localization, tracking and classification using passive listening buoy systems and target identification techniques. An autonomous three buoy system has been developed and field trials have been conducted successfully. Inaccuracies in the localization results, due to changes in the environmental parameters, measurement errors and theoretical approximations are refined using the Kalman filter approach. Simulation studies have been conducted for the tracking of targets with different scenarios even under maneuvering situations. This system can as well be used for classifying the unknown targets by extracting the features of the noise emanations from the targets.

Population characteristics and taxonomy of lantern fishes of genus Diaphus (Family Myctophidae) off south west coast of India

Globally most of the conventional fish stocks have reached a state of optimum exploitation or even over-exploitation; efficient utilization of non-conventional resources is necessary to meet the supply-demand gap for protein supply. Mesopelagic fishes can be considered as one such promising resource for the future, if appropriate harvest and post-harvest technologies are developed. Increasing human population and increasing demand for cheaper food fishes has made myctophids a possible potential resource for future exploitation and utilization. Earlier studies indicated the abundance of Diaphus spp. in the eastern and northeastern Arabian Sea. The present study also indicates the dominance of Diaphus spp. in the deep sea trawling grounds of south west coast of India. Commercial viability of the myctophid fishing in the Indian waters has to be worked out. The present catch estimation is based on the Stratified Random Sampling Method from the landing data. As the coverage of sampling area was limited and the gear efficiency was not standardized, the data generated are not precise. A counter check for the estimates is also not possible due to the absence of comparable works in the study area. Fish biomass estimation by acoustics survey coupled with direct fishing would only confirm the accuracy of estimates. Exploratory surveys for new fishing areas to be continued, for gathering the distribution, abundance, biological and ecological data and map the potential fishing ground on a GIS platform and the data should be provided to the commercial entrepreneurs. Generally non-conventional and non-targeted resources are under low fishing pressure and exploitation rates. Low values of fishing mortality and exploitation rates indicate that removal from the stock by fishing was only nominal from the present fishing grounds. The results indicate that the stock is almost at virgin state and remains grossly underexploited. Since the extent of distribution and abundance of the stock in the ecosystem remains to be ascertained, sustainable yield could not be estimated. Also the impact of myctophids harvest, on other commercially important fishes, has to be studied.

MSc Sound & Vibration Library Induction, October 2010

Library induction and information skills for MSc Sound and Vibration, given in October 2010. As well as an introduction to the hartley Library and the LoC classification scheme, it covers finding material from reading lists, e-journals, making up search strategies and searching online databases using boolean operators.

Verificación de los niveles de atenuación de dos tipos de protectores auditivos tipo copa en trabajadores de una empresa del sector Hidrocarburos. Barrancabermeja-Colombia 2013.

El presente estudio se realizó con el fin de verificar los niveles de atenuación de dos tipos de protectores auditivos tipo copa, bajo condiciones reales de operación en una empresa del sector hidrocarburos en Colombia. Esta verificación se llevó a cabo determinando las diferencias existentes entre los niveles de atenuación establecidos por el fabricante (NRR Teórico), los niveles de atenuación ajustados de acuerdo a la metodología propuesta por NIOSH (NRR Ajustado) y los niveles de atenuación obtenidos experimentalmente (NRR Experimental). El estudio se desarrolló sobre la evaluación de los niveles equivalentes de presión sonora, mediante dosimetrías de doble canal, valorando los niveles de ruido al interior y al exterior del pabellón auditivo de forma simultánea. Los valores obtenidos en las mediciones se ajustaron a los criterios establecidos en la norma ISO 11904 parte 1 considerando la estimación de niveles de inmisión sonora mediante técnica MIRE (Microphone In a Real Ear) corregidos a condiciones de campo libre. Los resultados obtenidos permitieron establecer diferencias significativas entre los niveles de atenuación teóricos, ajustados y experimentales, aspecto que brinda oportunidades de mejora cuando se trata de seleccionar y mantener elementos de protección personal auditiva como estrategia preventiva primaria en el propósito de la disminución de la probabilidad de ocurrencia de hipoacusia neurosensorial inducida por ruido en el lugar de trabajo.

Desenvolupament de mètodes de predicció de soroll i anàlisi de l'impacte acústic produït pel trànsit viari i el ferrocarril en la ciutat de Girona

La feina feta en aquest treball de tesis s'ha desenvolupat a partir de tres objectius vertebradors, que fonamentalment són: ·El primer dels objectius d'aquest treball de tesis és presentar un recull dels factors que intervenen en l'acústica urbanística: soroll produït pels diferents vehicles, fórmules de predicció de soroll, geometria dels edificis... , tot estudiant els seus efectes en la ciutat de Girona. ·Un altre objectiu ha estat desenvolupar uns mètodes numèrics propis, contrastats experimentalment i extrapolables a qualsevol entorn urbanístic, que permetin predir els valors de les pertorbacions acústiques produïdes pels diferents vehicles en diferents situacions, entre els que es destaquen: -Fórmula de predicció del soroll en un entorn urbà i la seva aplicació a Girona. -Càlcul de l'increment de soroll en un carrer provocat per les reflexions de les ones sonores en les façanes dels edificis. -Estudi del nivell de soroll en la boca de la cavitat d'un túnel produït pel pas del ferrocarril. -Determinació del soroll provocat pel pas d'un tren sobre un viaducte. -Mètode de distribució i planificació del trànsit urbà per disminuir l'impacte acústic sobre la zona. ·El darrer objectiu consisteix en fer una descripció analítica de les principals fonts de soroll que afecten a la ciutat: el trànsit viari i el ferrocarril. Per realitzar aquests objectius s'ha disposat d'un banc de dades amb més de 2.000 mesures sonores de Girona (nivells equivalents de 10 minuts de durada). La metodologia seguida i els principis en que es fonamenta es detallen a l'inici de cada apartat. La finalitat de tots aquests estudis, no és altre que millorar el confort acústic, i la qualitat de vida, de les ciutats. Gairebé tots els grans nuclis de població del planeta es veuen afectats per una gravíssima problemàtica mediambiental, doncs a l'anomenada contaminació acústica cal afegir uns alts índexs de pol·lució atmosfèrica (altes concentracions de biòxid de carboni, generació d'illes de calor...). Aquesta situació, generalitzada arreu del planeta, ha propiciat l'aparició de mesures dràstiques consistents fonamentalment en restringir l'accés dels vehicles motoritzats als nuclis i zones centrals de les àrees urbanes. Precisament aquesta opció s'ha proposat per les zones interiors de Girona on l'elevada densitat de les edificacions deixa un escàs marge per plantejar la construcció de noves rutes o vies alternatives. Cal esmentar que tots els càlculs i teories que es desenvolupen en aquest treball de tesis reflecteixen la realitat acústica actual provocada pels diferents mitjans de transport. Molt possiblement, en un futur no massa llunyà, els nivells de soroll (dB) enregistrats en situacions de tràfic similar seran força menors. Són molts els factors que poden contribuir a aquesta disminució de la intensitat de les emissions sonores: reducció del fregament mecànic, augment del coeficient aerodinàmic, nous materials pels pneumàtics i l'asfalt ... Sense cap mena de dubte, però, una millora transcendental, i no només pel que fa al confort acústic sinó per l'ecosistema en general, seria potenciar la construcció de motors elèctrics o d'hidrogen. Aquests últims per exemple, a diferència dels motors de combustió, funcionen mitjançant piles de combustible que converteixen, amb molta netedat, el gas hidrogen en electricitat i possibiliten l'existència de vehicles no contaminants propulsats per motors elèctrics menys sorollosos. Així, al haver-hi menys fregament entre les parts mòbils del motor (no hi ha pistons ni cilindres) el soroll generat es reduiria considerablement.

Acoustical barriers to communication and hearing

This study examined the acoustical conditions, including the surface-dimension measurements, background noise levels, and reverberation times in classrooms in a metropolitan area. The data collected in this study will help school administrators realize that appropriate classroom acoustics are necessary for both hearing impaired and normal hearing students.

The point-source method for 3D reconstructions for the Helmholtz and Maxwell equations

We use the point-source method (PSM) to reconstruct a scattered field from its associated far field pattern. The reconstruction scheme is described and numerical results are presented for three-dimensional acoustic and electromagnetic scattering problems. We give new proofs of the algorithms, based on the Green and Stratton-Chu formulae, which are more general than with the former use of the reciprocity relation. This allows us to handle the case of limited aperture data and arbitrary incident fields. Both for 3D acoustics and electromagnetics, numerical reconstructions of the field for different settings and with noisy data are shown. For shape reconstruction in acoustics, we develop an appropriate strategy to identify areas with good reconstruction quality and combine different such regions into one joint function. Then, we show how shapes of unknown sound-soft scatterers are found as level curves of the total reconstructed field.

On logarithmic ratio quantities and their units

The use of special units for logarithmic ratio quantities is reviewed. The neper is used with a natural logarithm (logarithm to the base e) to express the logarithm of the amplitude ratio of two pure sinusoidal signals, particularly in the context of linear systems where it is desired to represent the gain or loss in amplitude of a single-frequency signal between the input and output. The bel, and its more commonly used submultiple, the decibel, are used with a decadic logarithm (logarithm to the base 10) to measure the ratio of two power-like quantities, such as a mean square signal or a mean square sound pressure in acoustics. Thus two distinctly different quantities are involved. In this review we define the quantities first, without reference to the units, as is standard practice in any system of quantities and units. We show that two different definitions of the quantity power level, or logarithmic power ratio, are possible. We show that this leads to two different interpretations for the meaning and numerical values of the units bel and decibel. We review the question of which of these alternative definitions is actually used, or is used by implication, by workers in the field. Finally, we discuss the relative advantages of the alternative definitions.

Proposed design for an ultrasonic optical force-feedback microphone

We discuss a novel approach that would lead to the development of an ultrasonic optical force-feedback measurement microphone.

Robust classification of SAR imagery

In this work the G(A)(0) distribution is assumed as the universal model for amplitude Synthetic Aperture (SAR) imagery data under the Multiplicative Model. The observed data, therefore, is assumed to obey a G(A)(0) (alpha; gamma, n) law, where the parameter n is related to the speckle noise, and (alpha, gamma) are related to the ground truth, giving information about the background. Therefore, maps generated by the estimation of (alpha, gamma) in each coordinate can be used as the input for classification methods. Maximum likelihood estimators are derived and used to form estimated parameter maps. This estimation can be hampered by the presence of corner reflectors, man-made objects used to calibrate SAR images that produce large return values. In order to alleviate this contamination, robust (M) estimators are also derived for the universal model. Gaussian Maximum Likelihood classification is used to obtain maps using hard-to-deal-with simulated data, and the superiority of robust estimation is quantitatively assessed.

Performance limitations of piezoelectric and force feedback electrostatic transducers in different applications

Current limitations in piezoelectric and electrostatic transducers are discussed. A force-feedback electrostatic transducer capable of operating at bandwidths up to 20 kHz is described. Advantages of the proposed design are a linearised operation which simplifies the feedback control aspects and robustness of the performance characteristics to environmental perturbations. Applications in nanotechnology, optical sciences and acoustics are discussed.

Ocean acoustic models for low frequency propagation in 2D and 3D environments

In this paper we are mainly concerned with the development of efficient computer models capable of accurately predicting the propagation of low-to-middle frequency sound in the sea, in axially symmetric (2D) and in fully 3D environments. The major physical features of the problem, i.e. a variable bottom topography, elastic properties of the subbottom structure, volume attenuation and other range inhomogeneities are efficiently treated. The computer models presented are based on normal mode solutions of the Helmholtz equation on the one hand, and on various types of numerical schemes for parabolic approximations of the Helmholtz equation on the other. A new coupled mode code is introduced to model sound propagation in range-dependent ocean environments with variable bottom topography, where the effects of an elastic bottom, of volume attenuation, surface and bottom roughness are taken into account. New computer models based on finite difference and finite element techniques for the numerical solution of parabolic approximations are also presented. They include an efficient modeling of the bottom influence via impedance boundary conditions, they cover wide angle propagation, elastic bottom effects, variable bottom topography and reverberation effects. All the models are validated on several benchmark problems and versus experimental data. Results thus obtained were compared with analogous results from standard codes in the literature.

Room-acoustic factors in attentional tracking

In a “busy” auditory environment listeners can selectively attend to one of several simultaneous messages by tracking one listener's voice characteristics. Here we ask how well other cues compete for attention with such characteristics, using variations in the spatial position of sound sources in a (virtual) seminar room. Listeners decided which of two simultaneous target words belonged in an attended “context” phrase when it was played with a simultaneous “distracter” context that had a different wording. Talker difference was in competition with a position difference, so that the target‐word chosen indicates which cue‐type the listener was tracking. The main findings are that room‐acoustic factors provide some tracking cues, whose salience increases with distance separation. This increase is more prominent in diotic conditions, indicating that these cues are largely monaural. The room‐acoustic factors might therefore be the spectral‐ and temporal‐envelope effects of reverberation on the timbre of speech. By contrast, the salience of cues associated with differences in sounds' bearings tends to decrease with distance, and these cues are more effective in dichotic conditions. In other conditions, where a distance and a bearing difference cooperate, they can completely override a talker difference at various distances.