Discarge compilation from The Global River Discharge (RivDIS) Project

The Global River Discharge (RivDIS) data set contains monthly discharge measurements for 1018 stations located throughout the world. The period of record varies widely from station to station, with a mean of 21.5 years. These data were digitized from published UNESCO archives by Charles Voromarty, Balaze Fekete, and B.A. Tucker of the Complex Systems Research Center (CSRC) at the University of New Hampshire. River discharge is typically measured through the use of a rating curve that relates local water level height to discharge. This rating curve is used to estimate discharge from the observed water level. The rating curves are periodically rechecked and recalibrated through on-site measurement of discharge and river stage.

Novel method to improve the signal-to-noise ratio in the far-field results obtained from planar near-field measurements

A method to reduce the noise power in far-field pattern without modifying the desired signal is proposed. Therefore, an important signal-to-noise ratio improvement may be achieved. The method is used when the antenna measurement is performed in planar near-field, where the recorded data are assumed to be corrupted with white Gaussian and space-stationary noise, because of the receiver additive noise. Back-propagating the measured field from the scan plane to the antenna under test (AUT) plane, the noise remains white Gaussian and space-stationary, whereas the desired field is theoretically concentrated in the aperture antenna. Thanks to this fact, a spatial filtering may be applied, cancelling the field which is located out of the AUT dimensions and which is only composed by noise. Next, a planar field to far-field transformation is carried out, achieving a great improvement compared to the pattern obtained directly from the measurement. To verify the effectiveness of the method, two examples will be presented using both simulated and measured near-field data.

Acondicionamiento y procesado de señales mediante bus CAN en vehículos monoplaza

En este proyecto se ha diseñado un sistema de adquisición y uso compartido de datos orientado a la implantación en un vehículo monoplaza de Formula SAE. Más concretamente, se encarga de recoger la información proporcionada por cuatro sensores infrarrojos de temperatura que sondearán constantemente la temperatura a la que se encuentran las ruedas del vehículo. La información, recogida en una memoria de almacenamiento masivo, se compartirá con otros dispositivos mediante un bus común. Los sensores empleados para generar la información los proporciona Melexis. Dichos sensores permiten estar todos simultáneamente conectados en un bus común gracias a su electrónica interna. Mediante el bus I2C irán conectados los cuatro sensores de nuestra aplicación (uno por cada rueda) permitiéndose añadir a posteriori más sensores o incluso otros elementos que permitan la comunicación por este tipo de bus I2C. La gestión de las tareas se realiza mediante el microcontrolador DSPIC33FJ256GP710-I/PF proporcionado por Microchip. Este es un microcontrolador complejo, por lo que para nuestra aplicación desaprovecharemos parte de su potencial. En nuestra tarjeta ha sido solamente añadido el uso de los dos I2C (uno para la tarjeta SD y el otro para los sensores), el módulo ECAN1 (para las comunicaciones por bus CAN), el módulo SPI (para acceder a una memoria Flash), 4 ADCs (para posibles mediciones) y 2 entradas de interrupción (para posible interactuación con el usuario), a parte de los recursos internos necesarios. En este proyecto se realiza tanto el desarrollo de una tarjeta de circuito impreso dedicada a resolver la funcionalidad requerida, así como su programación a través del entorno de programación facilitado por Microchip, el ICD2 Programmer. In this project, an acquisition and sharing system of data, which is oriented to be installed in a Formula SAE single-seater vehicle, has been designed. Concretely, it is responsible for getting the information supplied by four IR temperature sensors that monitor the wheels temperature. The information, which is loaded in a massive storage memory, will be shared with other devices by means of a common bus. The sensors used to generate the information are supplied by Melexis. Such specific sensors let that all they can be connected to the same bus at the same time due to their internal electronic. The four sensors will be connected through an I2C bus, one for each wheel, although we could add later more sensors or even other devices that they were able to let the I2C communication. Tasks management will be done by means of the DSPIC33FJ256GP710-I/PF microcontroller, which will be supplied by Microchip. This is a complex microcontroller, so, in our application we waste off a part of its potential. In our PCB has only been incorporated the use of the two I2C (one for the SD card and the other for the sensors), the ECAN module (to communicate devices), the SPI module (to access to the Flash memory), 4 ADC’s (for possible measurements) and 2 interrupt inputs (for possible inter-action with the user), a part of the necessary internal resources. This project aims the PCB development dedicated to solve the requested functionality and its programming through the programming environment provided by Microchip (the ICD2 programmer).

A hands-on education project: antenna design for inter-CubeSat communications

CubeSat platforms have become a de facto standard for universities willing to initiate space-technology activities with students. These small satellite platforms ease the implementation of hands-on education projects and opening the apertures of new research areas. Moreover, due to the limited volume (a 10 cm cube) and power (1 W), the application of imaginative solutions is mandatory. This leads to new innovation processes in the course of CubeSat projects. In this paper, we present a hands-on education project the aim of which is the specification, design, building and measurement of an antenna for communication between nanosatellites and, in particular, CubeSats. The project lies within the framework of ETSIT-UPM innovative education activities in the area of space technology, where students play a leading role in real engineering projects.

StreamCloud: An elastic and scalable data streaming system

Many applications in several domains such as telecommunications, network security, large scale sensor networks, require online processing of continuous data lows. They produce very high loads that requires aggregating the processing capacity of many nodes. Current Stream Processing Engines do not scale with the input load due to single-node bottlenecks. Additionally, they are based on static con?gurations that lead to either under or over-provisioning. In this paper, we present StreamCloud, a scalable and elastic stream processing engine for processing large data stream volumes. StreamCloud uses a novel parallelization technique that splits queries into subqueries that are allocated to independent sets of nodes in a way that minimizes the distribution overhead. Its elastic protocols exhibit low intrusiveness, enabling effective adjustment of resources to the incoming load. Elasticity is combined with dynamic load balancing to minimize the computational resources used. The paper presents the system design, implementation and a thorough evaluation of the scalability and elasticity of the fully implemented system.

Experimental determination of the eutectic temperature in air of the CuO-TiO2 pseudobinary system

Eutectic temperature and composition in the CuO–TiO2 pseudobinary system have been experimentally determined in air by means differential thermal analysis (DTA), thermogravimetry (TG) and hot-stage microscopy (HSM). Samples of the new eutectic composition treated at different temperatures have been characterized by X-ray diffraction (XRD) and X-ray absorption near-edge structural spectroscopy (XANES) to identify phases and to determine the Cu valence state, respectively. The results show that the eutectic temperature in air is higher by 100 °C (∼1000 °C) for a Ti-richer composition (XTiO2=25 mol%) than the one calculated in the literature. The reduction of Cu2+ to Cu+ takes places at about 1030 °C. The existence of Cu2TiO3 and Cu3TiO4 has been confirmed by XRD in the temperature range between 1045 and 1200 °C.