A Mechanical Model For The Quantification Of The Effect Of Laser Quenching On Ctod In Steels

The technology of laser quenching is widely used to improve the surface properties of steels in surface engineering. Generally, laser quenching of steels can lead to two important results. One is the generation of residual stress in the surface layer. In general, the residual stress varies from the surface to the interior along the quenched track depth direction, and the residual stress variation is termed as residual stress gradient effect in this work. The other is the change of mechanical properties of the surface layer, such as the increases of the micro-hardness, resulting from the changes of the microstructure of the surface layer. In this work, a mechanical model of a laser-quenched specimen with a crack in the middle of the quenched layer is developed to quantify the effect of residual stress gradient and the average micro-hardness over the crack length on crack tip opening displacement (CTOD). It is assumed that the crack in the middle of the quenched layer is created after laser quenching, and the crack can be a pre-crack or a defect due to some reasons, such as a void, cavity or a micro-crack. Based on the elastic-plastic fracture mechanics theory and using the relationship between the micro-hardness and yield strength, a concise analytical solution, which can be used to quantify the effect of residual stress gradient and the average micro-hardness over the crack length resulting from laser quenching on CTOD, is obtained. The concise analytical solution obtained in this work, cannot only be used as a means to predict the crack driving force in terms of the CTOD, but also serve as a baseline for further experimental investigation of the effect after laser-quenching treatment on fracture toughness in terms of the critical CTOD of a specimen, accounting for the laser-quenching effect. A numerical example presented in this work shows that the CTOD of the quenched can be significantly decreased in comparison with that of the unquenched. (C) 2008 Elsevier B.V. All rights reserved.

Interface Fracture Behavior Of Electroplated Coating On Metal Substrate Under Compressive Strain

The inducement of interface fracture is crucial to the analysis of interfacial adhesion between coating and substrate. For electroplated coating/metal substrate adhering materials with strong adhesion, interface cracking and coating spalling are difficult to be induced by conventional methods. In this paper an improved bending test named as T-bend test was conducted on a model coating system, i.e. electroplated chromium on a steel substrate. After the test, cross-sections of the coated materials were prepared to compare the failure behaviors under tensile strain and compressive strain induced by T-bend test. And the observation results show that coating cracking, interface cracking and partial spalling appear step by step. Based on experimental results, a new method may be proposed to rank the coated materials with strong inter-facial adhesion. (C) 2008 Elsevier B.V. All rights reserved.

Probing single-molecule by surface-enhanced resonance Raman scattering with linearly and circularly polarized laser

Rhodamine 6G (R6G) was incubated in silver sols with different low concentrations and its surface-enhanced resonance Raman scattering (SERRS) spectra, excited by linearly and circularly polarized light, respectively, were studied. At the single-molecule level the SERRS spectra were recorded in 10(-13) M dye colloidal solution. Spectral inhomogeneous behaviors from single-molecule were observed such as spectral polarization, spectral diffusion and intensity fluctuations of vibrational lines. Difference between SERRS spectra of R6G excited by linearly and circularly polarized light and the effect of the polarizing angle of Raman signal relative to the slit of spectrograph on the Raman spectral polarization were analyzed and measured experimentally. Circularly polarized laser and the correction of the polarizing angle of Raman signal are necessary to avoid fake results in the measuring of Raman spectral of single-molecule, which was not noticed in initial papers. (c) 2005 Elsevier B.V. All rights reserved.

Investigation of nematode Eustrongylides larvae infections in mudfish Clarias gariepinus and C. anguillaris from Bida floodplain of Nigeria

This is the first report and record of the determination whether mudfish Clarias were infected with the larvae of the nematode Eustrongylides. Also, documented the assessment of the socio-economic perceptions of three groups of fisher folks on the economy of infected mudfish Clarias fishing activities. Fifty-six (67.5%) of 83 mudfish Clarias caught by artisanal fisher folks were examined for the presence of the larvae of the nematode Eustrongylides. All the 8 sampled fishing localities in Bida floodplain of Nigeria had a mean intensity and abundance of at least 3 and 1 worm per fish per site, respectively. Two hundred and one (96.2%) of 209 worms recovered were from the musculatures at different depths resulting in undulations on the skin surfaces as grub-like presentations. The three groups of fisher folks assessed encountered economic losses from nematode infected mudfish Clarias which attract much debates or rejections during marketing due to its aesthetically displeasing appearance, faster deterioration, higher fragility in smoked form coupled with poorer taste compared to the wholesome ones. Infected female mudfish Clarias had higher worm burden than the males, for each fishing locality

Zum Auftreten von Geruchs- und Geschmacksabweichungen ("Tainting") bei Frühjahrsheringen (Clupea harengus) aus der Ostsee

An account of the occurrenee of tainting in fish and seafood with special consideration of spring spawning herring from the Baltic Sea (estuary of the river Oder) is given. About 26 % of the herring samples examined by sensory methods showed tainting. In general the intensity of taint was weak or moderate and weaker as observed years ago. Also in fishery products (pickled herring, deep fried herring in marinade) processed from tainted herrings the same or a similar sensory intensity of taint as in the raw material was observed. The source of taint is not dear. A pollution with halogenphenols from the sea water could be possible. In further investigations we will monitor the further development and try to identify the tainting compounds.

Fish species identification in Canned Tuna by DNA Analysis (PCR-SSCP)

DNA in canned tuna is degraded into short fragments of a rew hundred base pairs. The polymerase chain reaction (PCR) was used to amplify short sequences of mitochondrial DNA, which were denatured and analysed by polyacrylamide gel electrophoresis (native PAGE) for detection of single strand conformation polymorphisms. Species specific patterns of DNA bands were obtained for a number of tuna and bonito species. DE: In Thunfischkonserven liegt die DNA in Form kurzkettiger Fragmente von wenigen Hundert Basenpaaren Länge vor. Mit Hilfe der Polymerase-Kettenreaktion (PCR) wurden kurze Sequenzen der mitochondrialen DNA vervielfältigt. Anschließend wurde die gebildete DNA in Einzelsträngen überführt, die durch eine native Polyacrylamidgel-Elektrophorese (PAGE) aufgetrennt wurde. Für eine Reihe von Thunfischen und Boniten ergaben die Einzelstränge artspezifische Bandenmuster, die auf unterschiedliche Konformationen der DNA-Stränge der einzelnen Fischarten zurückzuführen sind.

Análise da região 5 não traduzida (5 utr) em sequências anotadas como trans-sialidase no genoma de Trypanosoma cruzi

A transsialidase é uma glicoproteína de membrana pertencente a uma família de genes de cópia múltipla, envolvida no processo de invasão celular do Trypanosoma cruzi no hospedeiro vertebrado. Esta dissertação foi concebida com um amplo componente analítico que dependia de dados publicamente disponíveis, ou seja, as sequências oriundas do projeto genoma de T. cruzi e cDNAs de trans-sialidase depositadas no Genbank-dbEST. Este componente analítico necessitou ser complementado e ampliado com a obtenção experimental de novas sequências, a partir da metodologia baseada na transcrição reversa acoplada a PCR. Os fragmentos obtidos de cepas de T. cruzi Dm28c (T. cruzi I), Y (T. cruzi II), CL-Brener (T. cruzi II, cepa híbrida), INPA4167 (zimodema III), 3663 (zimodema III) e Colombiana (zimodema III) foram clonados, sequenciados e analisados composicionalmente. Essas sequências foram editadas e alinhadas usando-se o software CLUSTAL X. Em uma seção específica do Genbank, denominada dbEST, buscamos os cDNAs homólogos a trans-sialidase. Esta busca por similaridade foi realizada individualmente com os números de acesso referentes às seqüências supracitadas contra o dbEST utilizando o BLAST a fim de obtermos informações funcionais e evolutivas. Em seguida, desenvolvemos metodologias experimentais que nos permitiu avaliar segmentos da 5 UTR, tais como os sítios de trans-splicing adicionais ou múltiplos em TS e seus respectivos sinais (região rica em polipirimidina), variação composicional e tamanho da região das sequências entre diferentes linhagens de T. cruzi. O resultado dessa averiguação também nos mostrou a quantidade de cDNAs relacionados com a transsialidase no dbEST bem como a relação desses cDNAs com o mini-exon. As cepas do zimodema III apresentaram tamanho médio dos fragmentos de 312 bases, enquanto T. cruzi I e T. cruzi II apresentaram, respectivamente 209 e 218. Trans splicing adicional ou duplicações gênicas com mutações no sítio primário de trans splicing não parece ser um fenômeno exclusivo de algum grupo populacional, embora seja mais evidente em T. cruzi zimodema III.

Subspecies, morphs and clines in the amphipod Gammarus duebeni from fresh and saline waters

The nature and extent of morphological variation within populations of Gammarus duebeni are examined. The exceptional tolerance of G. duebeni to salinities that encompass three orders of magnitude was known in the 19th Century, and has attracted considerable attention from physiologists and ecologists in the 20th Century, including the likelihood that populations in freshwater are distinct from those living in more saline environments. It is concluded that gradual evolution into discrete and readily distinguished subspecies is currently underway, eventually producing several new species in freshwater and saline habitats.

Strategies for the Stereoselective Synthesis of Carbon Quaternary Centers via Transition Metal-Catalyzed Alkylation of Enolate Compounds

Notwithstanding advances in modern chemical methods, the selective installation of sterically encumbered carbon stereocenters, in particular all-carbon quaternary centers, remains an unsolved problem in organic chemistry. The prevalence of all-carbon quaternary centers in biologically active natural products and pharmaceutical compounds provides a strong impetus to address current limitations in the state of the art of their generation. This thesis presents four related projects, all of which share in the goal of constructing highly-congested carbon centers in a stereoselective manner, and in the use of transition-metal catalyzed alkylation as a means to address that goal.

The first research described is an extension of allylic alkylation methodology previously developed in the Stoltz group to small, strained rings. This research constitutes the first transition metal-catalyzed enantioselective α-alkylation of cyclobutanones. Under Pd-catalysis, this chemistry affords all–carbon α-quaternary cyclobutanones in good to excellent yields and enantioselectivities.

Next is described our development of a (trimethylsilyl)ethyl β-ketoester class of enolate precursors, and their application in palladium–catalyzed asymmetric allylic alkylation to yield a variety of α-quaternary ketones and lactams. Independent coupling partner synthesis engenders enhanced allyl substrate scope relative to allyl β-ketoester substrates; highly functionalized α-quaternary ketones generated by the union of our fluoride-triggered β-ketoesters and sensitive allylic alkylation coupling partners serve to demonstrate the utility of this method for complex fragment coupling.

Lastly, our development of an Ir-catalyzed asymmetric allylic alkylation of cyclic β-ketoesters to afford highly congested, vicinal stereocenters comprised of tertiary and all-carbon quaternary centers with outstanding regio-, diastereo-, and enantiocontrol is detailed. Implementation of a subsequent Pd-catalyzed alkylation affords dialkylated products with pinpoint stereochemical control of both chiral centers. The chemistry is then extended to include acyclic β-ketoesters and similar levels of selective and functional group tolerance are observed. Critical to the successful development of this method was the employment of iridium catalysis in concert with N-aryl-phosphoramidite ligands.

CONTRIBUTION TO THE DEVELOPMENT OF INTELLIGENT CONVERSATIONAL ASSISTANTS IN AUTOMOTIVE ENVIRONMENTS

Esta tesis presenta el diseño y desarrollo del Asistente Conversacional del Automóvil, Voice User Help en inglés, un sistema conversacional basado en el paradigma pregunta-respuesta y diseñado para consultar documentación del vehículo duartne la conducción. Este trabajo recoge investigaciones realizadas en los campos de la documentación técnica, recuperación de información, procesamineto de lenguaje natural, diseñode interfaces de usuario para vehículos, experiencia del usuario y computación afectiva con el fin de crear un asistente adaptativo y dinámico que modifica su comportamiento conversacional dependiendo del estado emocional del usuario.

Crystallization of amorphous Ge2Sb2Te5 films induced by a single femtosecond laser pulse

Crystallization is achieved in amorphous Ge2Sb2Te5 films upon irradiation with a single femtosecond laser pulse. Transmission electron microscopy images evidence the morphology of the crystallized spot which depends on the fluence of the ferntosecond laser pulse. Fine crystalline grains are induced at low fluence, and the coarse crystalline grains are obtained at high fluence. At the damage fluence, ablation of the films occurs. (C) 2004 Elsevier Ltd. All rights reserved.

Photobleaching process of xanthene dyes initiated by N-phenylglycine in the polyvinylalcohol film

The parameters such as quantum yield and molar absorption coefficients of the photoinitiator that are responsible for holographic sensitivity in photopolymer material are investigated with a single beam exposure experiment. The influence of exposure intensity, the concentrations of N-phenylglycine and dye on the photobleaching process of xanthenes dyes are presented. In addition, the effect of diphenyliodonium hexafluorophosphate salt on the quantum yield and molar absorption of xanthene dyes is studied. (c) 2005 Elsevier Ltd. All rights reserved.