Assessment of informatization for the dispensing of medications at a university hospital

INTRODUCTION: Informatics and automation are important tools for the reduction of work, errors and costs in a hospital pharmacy. OBJECTIVES: To describe the structuring and function of an informatized system for the dispensing of medications and to assess its effect on nursing and pharmacy services during the period from 1997 to 2003. MATERIALS and METHODS: In this descriptive and retrospective study, we performed an analysis of documents addressing the structuring and implementation of the informatized medication dispensing system. In addition, we analyzed the perceptions of nurses, pharmacists and pharmacy assistants who participated in the structuring phase of the system when interviewed about the effect of informatization on administrative aspects (e.g., requisition of medications, presentation of the dispensed medication and system operationalization). RESULTS: The major advantages provided by the new system were 1) the elimination of manual transcripts for prescribed medications, 2) increased speed, 3) better identification of the doses prescribed by physicians, 4) medication labels containing all necessary identification and 5) practicality and safety of optical bar code-based verification of the requested and dispensed medications. CONCLUSIONS: The great majority of the interviewees considered the informatized medication supply system to be of good quality. Analysis of the data provided information that could contribute to the expansion and refinement of the system, provide support for studies regarding the utilization of medications and offer new perspectives for work and productivity.

Stress-induced cross-sensitization to amphetamine is related to changes in the dopaminergic system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Time course of training-induced microcirculatory changes and of vegf expression in skeletal muscles of spontaneously hypertensive female rats

Exercise-induced vessel changes modulate arterial pressure (AP) in male spontaneously hypertensive rats (SHR). Vascular endothelial growth factor (VEGF) is important for angiogenesis of skeletal muscle. The present study evaluated the time course of VEGF and angiogenesis after short- and long-term exercise training of female SHR and Wistar Kyoto (WKY) rats, 8-9 weeks (200-250 g). Rats were allocated to daily training or remained sedentary for 3 days (N = 23) or 13 weeks (N = 23). After training, the carotid artery was catheterized for AP measurements. Locomotor (tibialis anterior and gracilis) and non-locomotor skeletal muscles (temporalis) were harvested and prepared for histologic and protein expression analyses. Training increased treadmill performance by all groups (SHR = 28%, WKY = 64%, 3 days) and (SHR = 141%, WKY = 122%, 13 weeks). SHR had higher values of AP than WKY (174 ± 4 vs 111 ± 2 mmHg) that were not altered by training. Three days of running increased VEGF expression (SHR = 28%, WKY = 36%) simultaneously with an increase in capillary-to-fiber ratio in gracilis muscle (SHR = 19%, WKY = 15%). In contrast, 13 weeks of training increased gracilis capillary-to-fiber ratio (SHR = 18%, WKY = 19%), without simultaneous changes in VEGF expression. Training did not change VEGF expression and capillarity of temporalis muscle. We conclude that training stimulates time- and tissue-dependent VEGF protein expression, independent of pressure levels. VEGF triggers angiogenesis in locomotor skeletal muscle shortly after the exercise starts, but is not involved in the maintenance of capillarity after long-term exercise in female rats.

Emprego da levomepromazina no bloqueio da arritmia induzida pela adrenalina em cães anestesiados pelo Sevoflurano

Este experimento objetivou estudar o possível efeito antiarritmogênico da levomepromazina em cães anestesiados pelo sevoflurano e submetidos a doses crescentes de adrenalina. Para tal, foram empregados 21 animais adultos, machos e fêmeas, sem raça definida e considerados sadios. Os cães foram separados em dois grupos, sendo um de 11 (G1) e outro de 10 (G2) animais. O G1 recebeu, por via intravenosa, solução salina a 0,9%, na dose de 0,2ml/kg (placebo), seguida 15 minutos após, pela aplicação de tiopental, pela mesma via, na dose suficiente para abolir o reflexo laringotraqueal. Procedeu-se à intubação orotraqueal e iniciou-se a administração de sevoflurano a 2,5V%, em circuito anestésico semi-fechado. Decorridos 20 minutos da indução anestésica, iniciou-se a administração contínua, por via intravenosa, com emprego de bomba de infusão, de solução de adrenalina a 2%, em doses crescentes de 1, 2, 3, 4 e 5m g/kg/min (M1 a M5, respectivamente), com incremento da dose a intervalos de 10 minutos. Para o G2, empregou-se a mesma metodologia substituindo-se o placebo por levomepromazina, na dose de 1mg/kg. Foi tomado o traçado eletrocardiográfico, na derivação D2, a partir da indução da anestesia. Para efeito estatístico, foi considerado o número total de batimentos cardíacos de origem não sinusal, coincidentes com cada dose de adrenalina. Os dados numéricos foram submetidos à Análise de Perfil, quando foi possível constatar que as médias do G1 foram crescentes de M1 a M3, diminuindo a partir deste último, até M5. No G2, foi encontrada arritmia ventricular sustentada apenas em M5. Os achados permitiram concluir que a levomepromazina minimiza a arritmia ventricular sustentada, induzida pela adrenalina em cães anestesiados pelo sevoflurano.

Waveshapes of continuing currents and properties of M-components in natural positive cloud-to-ground lightning

This work analyses the waveshapes of continuing currents and parameters of M-components in positive cloud-to-ground (CG) flashes through high-speed GPS synchronized videos. The dataset is composed of only long continuing currents (with duration longer than 40 ms) and was selected from more than 800 flashes recorded in Sao Jose dos Campos (45.864 degrees W, 23.215 degrees S) and Uruguaiana (29.806 degrees W, 57.005 degrees S) in Southeast and South of Brazil, respectively, during 2003 to 2007 summers. The videos are compared with data obtained by the Brazilian Lightning Location System (BrasilDAT) in order to determine the polarity of each flash and select only positive cases. There are only two studies of waveshapes of continuing currents in the literature. One is based on direct current measurements of triggered lightning, in which four different types of waveshapes were observed; and the other is based on measurements of luminosity variations in high-speed videos of CG negative lightning, in which besides the four types above mentioned two additional types were observed. The present work is an extension of the latter, using the same method but now applied to obtain the waveshapes of positive CG lightning. As far as the authors know, this is the first report on M-components in positive continuing currents. We also have used the luminosity-versus-time graphs to observe their occurrence and measure some parameters (duration, elapsed time and time between two successive M-components), whose statistics are presented and compared in detail to the data for negative flashes. We have plotted a histogram of the M-components elapsed time over the total duration of the continuing current for positive flashes, which presented an exponential decay (correlation coefficient: 0.83), similar to what has been observed for negative flashes. (C) 2008 Elsevier B.V. All rights reserved.

Effect of PbS impurity on crystallization mechanism of phosphate glasses studied by differential scanning calorimetry

In this work, differential scanning calorimetry (DSC) was used to study effect of PbS impurity on crystallization mechanism of phosphate glasses. Bulk glasses presented one crystallization peak while powdered glasses presented two distinct crystallization peaks. For both undoped and doped glasses were determined the activation energies for the crystallization and the Avrami n parameters. The activation energies for undoped phosphate glass were 336 +/- 6 and 213 +/- 3 kJ mol(-1), respectively, associated with first and second crystallization peaks. For doped glass, the obtained energies were 373 +/- 9 and 286 +/- 7 kJ mol(-1). The calculated Avrami parameters, based on first crystallization peaks, for undoped and doped glasses were 2.25 +/- 0.01 and 1.75 +/- 0.02, respectively. These values suggest that the first DSC peak, in both glasses, may be associated with surface crystallization. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Diarréia em bezerros da raça Nelore criados extensivamente: estudo clínico e etiológico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adenocarcinoma of the parotid salivary gland in a cow

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Anestesia epidural com ropivacaína, lidocaína ou associação de lidocaína e xilazina em cães: efeitos cardiorrespiratório e analgésico

Este estudo investigou o efeito da ropivacaína, da lidocaína e da associação de lidocaína e xilazina na anestesia epidural de cães. Trinta cães foram tranqüilizados com acepromazina intravenosa, distribuídos em três grupos e submetidos à anestesia epidural no espaço lombo-sacro, com lidocaína 2% com vasoconstrictor (GL), ropivacaína 1% (GR) ou com xilazina associada à lidocaína (GXL). Mensuraram-se as freqüências cardíaca (FC) e respiratória (f), a pressão arterial sistólica (PAS), a concentração final expirada de CO2 (EtCO2), o volume minuto (VM) e a temperatura retal (T). Para avaliação da analgesia somática, utilizou-se o teste do panículo e o teste térmico a 55°C. Os protocolos produziram anestesia da região retro-umbilical, sendo que a associação XL produziu bloqueio anestésico mais cranial, porém causou bradicardia moderada. A duração da anestesia foi mais prolongada nos animais dos grupos GXL (240 min) e GR (250 min), quando comparada as do grupo GL (120 min).

Microbiological Quality of Spices Marketed in the City of Botucatu, São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Methods of Concentrating Stallion Semen

Removal of excess seminal plasma is sometimes necessary to increase the quality and the longevity of cooled equine semen; moreover, this procedure is an indispensable step aiming to concentrate the sperm cells before freezing equine semen. Typically, the removal of seminal plasma is achieved by centrifugation; however, studies have shown that the force and duration of centrifugation can damage sperm cells and reduce the sperm recovery rate. Recently, new methodologies, such as cushion and filtration, have been described that aim to decrease the mechanical damage of centrifugation to sperm cells. This study aims to compare different methods for concentrating stallion semen.

Influência de um nutracêutico no sêmen, testosterona, cortisol, eritrograma e peso corpóreo em touros jovens Bos taurus indicus

The purpose of this study was to investigate the nutraceutic (Promater (R)) influence on semen, body weight, eritrogram and hormones testosterone and cortisol in Nelore young bulls. Twenty Nelore bulls were utilized, aging between 30 and 36 months, divided in group 1 (G1)= 10 (control) and group 2 (G2)= 10 (nutraceutic group - Promater (R): 20 mL/animal/day, during 70 days). Corporal weight, blood samples to eritrogram, testosterone and cortisol were obtained in days zero (D0), 35 (D35) and 70 (D70) in two groups. There was difference (P<0.01) among days collected (0, 35 and 70) with means of 424.30 kg, 480.70 kg and 502.60 kg, respectively, but there was not difference between groups. There was not difference among groups to semen, eritrogram, cortisol (G1 = 3,19 mu g/dL; G2 = 2,91 mu g/dL) and testosterone (G1 = 274,48 ng/dL; G2 = 509,65 ng/dL). The results exposed allow concluding that were not observed significative effect of the nutraceutic upon evaluated parameters: body weight, semen, hormonal profile and eritrogram.

Photoelastic Analysis of the Influence of Platform Switching on Stress Distribution in Implants

The aim of this study was to evaluate the stress distribution of platform switching implants using a photoelastic method. Three models were constructed of the photoelastic resin PL-2, with a single implant and a screw-retained implant-supported prosthesis. These models were Model A, platform 5.0 mm/abutment 4.1 mm; Model B, platform 4.1 mm/abutment 4.1 mm; and Model C, platform 5.00 mm/abutment 5.00 mm. Axial and oblique (45 degrees) loads of 100 N were applied using a Universal Testing Machine (EMIC DL 3000). Images were photographed with a digital camera and visualized with software (AdobePhotoshop) to facilitate the qualitative analysis. The highest stress concentrations were observed at the apical third of the 3 models. With the oblique load, the highest stress concentrations were located at the implant apex, opposite the load application. Stress concentrations decreased in the cervical region of Model A (platform switching), and Models A (platform switching) and C (conventional/wide-diameter) displayed similar stress magnitudes. Finally, Model B (conventional/regular diameter) displayed the highest stress concentrations of the models tested.