942 resultados para 3T3-L1
Resumo:
This study was performed to evaluate the efficiency of four different lineages (95/01, L1, 96/22 and JABK) of Lentinula edodes (BERK.) Pegler mushroom (shiitake) for inhibiting the N-ethyl-N-nitrosourea (ENU) clastogenicity in vivo. Male Swiss mice (10 animals/group) were treated during 15 consecutive days with dried mushroom added to basal diet under three different concentrations (1, 5 and 10%). At day 15, mice were intraperitoneally injected with ENU (50 mg/kg body weight) and sacrificed 24 h later for evaluation of micronucleated bone marrow polychromatic erythrocytes (MNPCE). Negative and positive controls (10 animals each), receiving basal diet and saline or ENU ip injection, respectively, were also evaluated. Results showed that pretreatments with diets containing the lineages 95/01, L1 and 96/22 reduce the frequencies of MNPCE induced by ENU. The absence of an antimutagenic activity for the lineage JABK might be related to intrinsic differences among the lineages such as biochemical composition. Taken together, our data show that the differences in protective activities of the mushrooms need to be clarified in further studies and the mechanisms for such activities need to be investigated. (C) 2003 Elsevier B.V. Ltd. All rights reserved.
Resumo:
Para recomendações de adubação mais racionais, é fundamental o conhecimento das exigências nutricionais da cultura do arroz, nos diversos sistemas de cultivo. Objetivando estudar a influência de lâminas de água na nutrição e exportação de nutrientes pelo arroz de terras altas, cultivar IAC 201, sob dois níveis de adubação, foram instalados experimentos em um Latossolo Vermelho distrófico, em Selvíria (MS), nos anos agrícolas de 1994/95 e 1995/96. O delineamento foi de blocos casualizados, com quatro repetições. Os tratamentos constituíram-se da precipitação natural e de quatro lâminas de água fornecidas por aspersão. A lâmina L2 foi baseada no coeficiente de cultura (Kc) do arroz de terras altas. As lâminas L1 e L3 foram definidas como 0,5 e 1,5 vez os Kcs utilizados em L2, respectivamente, e na lâmina L4 foi adotado Kc = 1,95 durante todo o ciclo da cultura. em 1995/96, foram utilizados os mesmos tratamentos em parcelas subdivididas, sendo as subparcelas constituídas por duas doses de adubação (AD1 - 12 kg ha-1 de N, 90 de P2O5 e 30 de K2O, e AD2 - 24 kg ha-1 de N, 180 de P2O5 e 60 de K2O). A menor disponibilidade de água durante a fase vegetativa e reprodutiva proporcionou redução na produção de matéria seca, nos teores e quantidades de nutrientes acumuladas na parte aérea. O sistema irrigado por aspersão, independentemente da lâmina utilizada, proporcionou maior produtividade de grãos e exportação de nutrientes. em solos com teores adequados de nutrientes para o sistema de sequeiro, não há resposta ao aumento da adubação mineral pelo arroz no sistema irrigado por aspersão, apesar da maior extração de nutrientes.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The ionospheric effect is one of the major errors in GPS data processing over long baselines. As a dispersive medium, it is possible to compute its influence on the GPS signal with the ionosphere-free linear combination of L1 and L2 observables, requiring dual-frequency receivers. In the case of single-frequency receivers, ionospheric effects are either neglected or reduced by using a model. In this paper, an alternative for single-frequency users is proposed. It involves multiresolution analysis (MRA) using a wavelet analysis of the double-difference observations to remove the short- and medium-scale ionosphere variations and disturbances, as well as some minor tropospheric effects. Experiments were carried out over three baseline lengths from 50 to 450 km, and the results provided by the proposed method were better than those from dual-frequency receivers. The horizontal root mean square was of about 0.28 m (1 sigma).
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
After removal of the Selective Availability in 2000, the ionosphere became the dominant error source for Global Navigation Satellite Systems (GNSS), especially for the high-accuracy (cm-mm) demanding applications like the Precise Point Positioning (PPP) and Real Time Kinematic (RTK) positioning.The common practice of eliminating the ionospheric error, e. g. by the ionosphere free (IF) observable, which is a linear combination of observables on two frequencies such as GPS L1 and L2, accounts for about 99% of the total ionospheric effect, known as the first order ionospheric effect (Ion1). The remaining 1% residual range errors (RREs) in the IF observable are due to the higher - second and third, order ionospheric effects, Ion2 and Ion3, respectively. Both terms are related with the electron content along the signal path; moreover Ion2 term is associated with the influence of the geomagnetic field on the ionospheric refractive index and Ion3 with the ray bending effect of the ionosphere, which can cause significant deviation in the ray trajectory (due to strong electron density gradients in the ionosphere) such that the error contribution of Ion3 can exceed that of Ion2 (Kim and Tinin, 2007).The higher order error terms do not cancel out in the (first order) ionospherically corrected observable and as such, when not accounted for, they can degrade the accuracy of GNSS positioning, depending on the level of the solar activity and geomagnetic and ionospheric conditions (Hoque and Jakowski, 2007). Simulation results from early 1990s show that Ion2 and Ion3 would contribute to the ionospheric error budget by less than 1% of the Ion1 term at GPS frequencies (Datta-Barua et al., 2008). Although the IF observable may provide sufficient accuracy for most GNSS applications, Ion2 and Ion3 need to be considered for higher accuracy demanding applications especially at times of higher solar activity.This paper investigates the higher order ionospheric effects (Ion2 and Ion3, however excluding the ray bending effects associated with Ion3) in the European region in the GNSS positioning considering the precise point positioning (PPP) method. For this purpose observations from four European stations were considered. These observations were taken in four time intervals corresponding to various geophysical conditions: the active and quiet periods of the solar cycle, 2001 and 2006, respectively, excluding the effects of disturbances in the geomagnetic field (i.e. geomagnetic storms), as well as the years of 2001 and 2003, this time including the impact of geomagnetic disturbances. The program RINEX_HO (Marques et al., 2011) was used to calculate the magnitudes of Ion2 and Ion3 on the range measurements as well as the total electron content (TEC) observed on each receiver-satellite link. The program also corrects the GPS observation files for Ion2 and Ion3; thereafter it is possible to perform PPP with both the original and corrected GPS observation files to analyze the impact of the higher order ionospheric error terms excluding the ray bending effect which may become significant especially at low elevation angles (Ioannides and Strangeways, 2002) on the estimated station coordinates.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In the relative positioning, even considering that part of the errors due to ionosphere is canceled with the double-difference observations, strong ionospheric effects can occur in maximum solar activity period. However, in minimum solar activity period, the ionospheric effects decrease significantly and therefore an improvement of the relative positioning performance takes place. In this paper we aim at showing that improvement for the scientific and GPS community users. So, have been experiments by using GPS data of two stations of the Brazilian Network for Continuous Monitoring of GPS, forming a baseline of 430 km. The processing were use accomplished with interval of two hours, and only L1 carrier data have been used. The analysis of the obtained results has been carried out from the discrepancies between the "true" coordinates and corresponding ones obtained in the processing. In maximum solar activity period the discrepancy value reached 25 m. on the other hand, in minimum solar activity period, the discrepancy value reached 5,5 m. It is important to emphasize that the majority of the discrepancy values didn't exceed 0,50 m, and in some cases only reached 0,10 m. This shows the increase of application possibilities of the relative positioning using single-frequency GPS receivers in minimum solar activity period.
Resumo:
One of the main drawbacks of the GPS accuracy for L1 users is the error due to ionosphere. This error depends on the total electron content presents in the ionosphere, as well as of the carrier frequency. Some models have been developed to correct GPS observables of the systematic error due to the ionosphere. The model more known and used is the Klobuchar model, which corrected 50-60% of the ionospheric error approximately. Alternatively, IGS (International GNSS Service) also has developed a model called Global Ionospheric Map (GIM). These maps, in format IONEX, are available in the site of the IGS, and one of the applications of them is to correct the GPS observables of the error due to ionosphere. This work aims at evaluating the quality of GPS point positioning using the IGS ionospheric model in the southerm region of Brazil. Tests carried out had shown an average improvement in the horizontal and vertical determination of 44% and 77%, respectively, when GIM is used in the point positioning.
Fatores de risco para síndrome metabólica em cadeirantes: jogadores de basquetebol e não praticantes
Resumo:
A atividade física tem sido sistematicamente estudada como fator preventivo no acometimento de enfermidades crônico-degenerativas, especialmente a síndrome metabólica e doenças cardiovasculares. Sedentarismo está relacionado à diminuição ou ausência de parâmetros mínimos de exigência física diária além do estado de repouso, sendo este fortemente associado à redução na condição de saúde dos indivíduos portadores de deficiência física. As respostas metabólicas do organismo mediante a ausência de determinada musculatura, ou sua inatividade pela falta de estímulos, conduzem a diferenças significativas na estruturação da composição corporal. Esta pesquisa teve como objeto o exercício físico regular e a condição de saúde de indivíduos portadores de deficiência física, através da determinação do perfil antropométrico e bioquímico sangüíneo, e ainda pela determinação da prevalência de fatores de risco para síndrome metabólica. Foram estudados 27 homens com paraplegia (T2-L1), portadores de seqüelas de poliomielite ou amputados, divididos em jogadores de basquetebol cadeirantes (JBC) e não jogadores de basquetebol cadeirantes (NJBC). Os JBC apresentaram circunferência de cintura menor comparada aos NJBC, 76,40±8,44 e 89,25±9,73 cm respectivamente (p<0,05). A pressão arterial sistólica foi significativamente maior nos NJBC 123,33±13,70 e 114,00±9,85 mmHg para JBC (p<0,05), não sendo verificada diferença para PAD. Os NJBC apresentaram valores superiores aos JBC para a bioquímica sangüínea de glicemia, TG, CT e frações, exceto para HDL-C (p<0,05). Os indivíduos NJBC apresentaram alta prevalência para fatores de risco da SM, sendo hipertensão arterial prevalente em 58,33% dos indivíduos, dislipidemia de HDL-C presente em 50% e circunferência de cintura acima da normalidade em 41,66%. Os achados do presente estudo sugerem um papel importante do exercício físico na prevenção da síndrome metabólica, embora estudos adicionais devam ser realizados para a melhor compreensão dos mecanismos que promovem a saúde dos deficientes físicos ativos.
Resumo:
The production of oil and gas is usually accompanied by the production of water, also known as produced water. Studies were conducted in platforms that discharge produced water in the Atlantic Ocean due to oil and gas production by Petrobras from 1996 to 2006 in the following basins: Santos (Brazilian south region), Campos (Brazilian southeast region) and Ceara (Brazilian northeast region). This study encompasses chemical composition, toxicological effects, discharge volumes, and produced water behavior after releasing in the ocean, including dispersion plumes modeling and monitoring data of the marine environment. The concentration medians for a sampling of 50 samples were: ammonia (70 mg L-1), boron (1.3 mg L1), iron (7.4 mg L-1), BTEX (4.6 mg L-1), PAH (0.53 mg L-1), TPH (28 mg L-1); phenols (1.3 mg L-1) and radioisotopes (0.15 Bq L-1 for 226Ra and 0.09 Bq L-1 for 228Ra). The concentrations of the organic and inorganic parameters observed for the Brazilian platforms were similar to the international reference data for the produced water in the North Sea and in other regions of the world. It was found significant differences in concentrations of the following parameters: BTEX (p<0.0001), phenols (p=0.0212), boron (p<0.0001), iron (p<0.0001) and toxicological response in sea urchin Lytechinus variegatus (p<0.0001) when considering two distinguished groups, platforms from southeast and northeast Region (PCR-1). Significant differences were not observed among the other parameters. In platforms with large gas production, the monoaromatic concentrations (BTEX from 15.8 to 21.6 mg L-1) and phenols (from 2 to 83 mg L-1) were higher than in oil plataforms (median concentrations of BTEX were 4.6 mg L-1 for n=53, and of phenols were 1.3 mg L-1 for n=46). It was also conducted a study about the influence of dispersion plumes of produced water in the vicinity of six platforms of oil and gas production (P-26, PPG-1, PCR-1, P-32, SS-06), and in a hypothetical critical scenario using the chemical characteristics of each effluent. Through this study, using CORMIX and CHEMMAP models for dispersion plumes simulation of the produced water discharges, it was possible to obtain the dilution dimension in the ocean after those discharges. The dispersion plumes of the produced water modelling in field vicinity showed dilutions of 700 to 900 times for the first 30-40 meters from the platform PCR-1 discharge point; 100 times for the platform P-32, with 30 meters of distance; 150 times for the platform P-26, with 40 meters of distance; 100 times for the platform PPG-1, with 130 meters of distance; 280 to 350 times for the platform SS-06, with 130 meters of distance, 100 times for the hypothetical critical scenario, with the 130 meters of distance. The dilutions continue in the far field, and with the results of the simulations, it was possible to verify that all the parameters presented concentrations bellow the maximum values established by Brazilian legislation for seawater (CONAMA 357/05 - Class 1), before the 500 meters distance of the discharge point. These results were in agreement with the field measurements. Although, in general results for the Brazilian produced water presented toxicological effects for marine organisms, it was verified that dilutions of 100 times were sufficient for not causing toxicological responses. Field monitoring data of the seawater around the Pargo, Pampo and PCR-1 platforms did not demonstrate toxicity in the seawater close to these platforms. The results of environmental monitoring in seawater and sediments proved that alterations were not detected for environmental quality in areas under direct influence of the oil production activities in the Campos and Ceara Basin, as according to results obtained in the dispersion plume modelling for the produced water discharge
Resumo:
The production of oil and gas is usually accompanied by the production of water, also known as produced water. Studies were conducted in platforms that discharge produced water in the Atlantic Ocean due to oil and gas production by Petrobras from 1996 to 2006 in the following basins: Santos (Brazilian south region), Campos (Brazilian southeast region) and Ceara (Brazilian northeast region). This study encompasses chemical composition, toxicological effects, discharge volumes, and produced water behavior after releasing in the ocean, including dispersion plumes modeling and monitoring data of the marine environment. The concentration medians for a sampling of 50 samples were: ammonia (70 mg L-1), boron (1.3 mg L1), iron (7.4 mg L-1), BTEX (4.6 mg L-1), PAH (0.53 mg L-1), TPH (28 mg L-1); phenols (1.3 mg L-1) and radioisotopes (0.15 Bq L-1 for 226Ra and 0.09 Bq L-1 for 228Ra). The concentrations of the organic and inorganic parameters observed for the Brazilian platforms were similar to the international reference data for the produced water in the North Sea and in other regions of the world. It was found significant differences in concentrations of the following parameters: BTEX (p<0.0001), phenols (p=0.0212), boron (p<0.0001), iron (p<0.0001) and toxicological response in sea urchin Lytechinus variegatus (p<0.0001) when considering two distinguished groups, platforms from southeast and northeast Region (PCR-1). Significant differences were not observed among the other parameters. In platforms with large gas production, the monoaromatic concentrations (BTEX from 15.8 to 21.6 mg L-1) and phenols (from 2 to 83 mg L-1) were higher than in oil plataforms (median concentrations of BTEX were 4.6 mg L-1 for n=53, and of phenols were 1.3 mg L-1 for n=46). It was also conducted a study about the influence of dispersion plumes of produced water in the vicinity of six platforms of oil and gas production (P-26, PPG-1, PCR-1, P-32, SS-06), and in a hypothetical critical scenario using the chemical characteristics of each effluent. Through this study, using CORMIX and CHEMMAP models for dispersion plumes simulation of the produced water discharges, it was possible to obtain the dilution dimension in the ocean after those discharges. The dispersion plumes of the produced water modelling in field vicinity showed dilutions of 700 to 900 times for the first 30-40 meters from the platform PCR-1 discharge point; 100 times for the platform P-32, with 30 meters of distance; 150 times for the platform P-26, with 40 meters of distance; 100 times for the platform PPG-1, with 130 meters of distance; 280 to 350 times for the platform SS-06, with 130 meters of distance, 100 times for the hypothetical critical scenario, with the 130 meters of distance. The dilutions continue in the far field, and with the results of the simulations, it was possible to verify that all the parameters presented concentrations bellow the maximum values established by Brazilian legislation for seawater (CONAMA 357/05 - Class 1), before the 500 meters distance of the discharge point. These results were in agreement with the field measurements. Although, in general results for the Brazilian produced water presented toxicological effects for marine organisms, it was verified that dilutions of 100 times were sufficient for not causing toxicological responses. Field monitoring data of the seawater around the Pargo, Pampo and PCR-1 platforms did not demonstrate toxicity in the seawater close to these platforms. The results of environmental monitoring in seawater and sediments proved that alterations were not detected for environmental quality in areas under direct influence of the oil production activities in the Campos and Ceara Basin, as according to results obtained in the dispersion plume modelling for the produced water discharge
Resumo:
In Brazil, the upland rice Culture system is predominant, but its water supply depends of precipitation and its distribution. Sol-lie practices or disturbances on soil conditions may cause alterations that call be detected by microorganisms, which are quite sensitive. This experiment was developed to study microbiological alterations (microbial biomass carbon (MBC), released CO2 (C-CO2), metabolic quotient (qCO(2)) and mycorrhization), as well as alterations in soil fertility and productivity of upland rice, cultivated under different soil and water managements. Cultivar BRS Talento was used in the experiment. The experimental design was a completely randomized block design, with four replications, using three soil managements: no-tillage (NT), heavy disk + leveling disk harrowing (HL), and chisel plowing + leveling disk harrowing (CL), plus three water managements: no irrigation (WD0); water depth 1 (WD1), with irrigation at the reproductive and maturation periods; and water depth 2 (WD2), with irrigation throughout the rice cycle. Autochthones arbuscular mycorrhizal fungi proved to be sensitive to soil and water management. The NT presented the highest values for MO, Ca, SB and V% and the lowest for H+A1. This management, together with irrigation at the reproductive and maturation periods of BRS Talento cultivar, promoted goods results for crop yield and microbiology characteristics.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)