A new, fast and flexible radiative transfer method for Venus general circulation models

We present a new radiation scheme for the Oxford Planetary Unified Model System for Venus, suitable for the solar and thermal bands. This new and fast radiative parameterization uses a different approach in the two main radiative wavelength bands: solar radiation (0.1-5.5 mu m) and thermal radiation (1.7-260 mu m). The solar radiation calculation is based on the delta-Eddington approximation (two-stream-type) with an adding layer method. For the thermal radiation case, a code based on an absorptivity/emissivity formulation is used. The new radiative transfer formulation implemented is intended to be computationally light, to allow its incorporation in 3D global circulation models, but still allowing for the calculation of the effect of atmospheric conditions on radiative fluxes. This will allow us to investigate the dynamical-radiative-microphysical feedbacks. The model flexibility can be also used to explore the uncertainties in the Venus atmosphere such as the optical properties in the deep atmosphere or cloud amount. The results of radiative cooling and heating rates and the global-mean radiative-convective equilibrium temperature profiles for different atmospheric conditions are presented and discussed. This new scheme works in an atmospheric column and can be easily implemented in 3D Venus global circulation models. (C) 2014 Elsevier Ltd. All rights reserved.

Collaboration in Virtual Enterprises through the Smart Vortex Suite

Part 12: Collaboration Platforms

Conceptual Reference Model for Virtual Factory: Potentials for Collaborative Business

Part 11: Reference and Conceptual Models

Determinants of engagement in virtual social networks in Singapore

The use of virtual social networks (VSNs) has been prevalent among consumers worldwide. Numerous studies have investigated various aspects of VSNs. However, these studies have mainly focused on students and young adults as they were early adopters of these innovative networks. A search of the literature revealed there has been a paucity of research on adult consumers’ use of VSNs. This research study addressed this gap in the literature by examining the determinants of engagement in VSNs among adult consumers in Singapore. The objectives of this study are to empirically investigate the determinants of engagement in VSNs and to offer theoretical insights into consumers’ preference and usage of VSNs. This study tapped upon several theories developed in the discipline of technology and innovation adoption. These were Roger’s Diffusion of Innovation, Theory of Reasoned Action (TRA), Theory of Planned Behavior (TPB), Technology Acceptance Model (TAM), Conceptual Framework of Individual Innovation Adoption by Frambach and Schillewaert (2002), Enhanced Model of Innovation Adoption by Talukder (2011), Extended Unified Theory of Acceptance and Use of Technology (UTAUT2) and the Information Systems (IS) Success Model. The proposed research model, named the Media Usage Model (MUM), is a framework rooted in innovation diffusion and IS theories. The MUM distilled the essence of these established models and thus provides an updated, lucid explanation of engagement in VSNs. A cross-sectional, online social survey was conducted to collect quantitative data to examine the validity of the proposed research model. Multivariate data analysis was carried out on a data set comprising 806 usable responses by utilizing SPSS, and for structural equation modeling AMOS and SmartPLS. The results indicate that consumer attitude towards VSNs is significantly and positively influenced by: three individual factors – hedonic motivation, incentives and experience; two system characteristics – system quality and information quality; and one social factor – social bonding. Consumer demographics were found to influence people’s attitudes towards VSNs. In addition, consumer experience and attitude towards VSNs significantly and positively influence their usage of VSNs. The empirical data supported the proposed research model, explaining 80% of variance in attitude towards VSNs and 45% of variance in usage of VSNs. Therefore, the MUM achieves a definite contribution to theoretical knowledge of consumer engagement in VSNs by deepening and broadening our appreciation of the intricacies related to use of VSNs in Singapore. This study’s findings have implications for customer service management, services marketing and consumer behavior. These findings also have strategic implications for maximizing efficient utilization and effective management of VSNs by businesses and operators. The contributions of this research are: firstly, shifting the boundaries of technology or innovation adoption theories from research on employees to consumers as well as the boundaries of Internet usage or adoption research from students to adults, which is also known as empirical generalization; secondly, highlighting the issues associated with lack of significance of social factors in adoption research; and thirdly, augmenting information systems research by integrating important antecedents for success in information systems.

A Governance Reference Model for Virtual Enterprises

Part 2: Behaviour and Coordination

Influence of implant-abutment angulations and crown material on stress distribution on central incisor: a 3D FEA

Aim: To investigate the effect of implant-abutment angulation and crown material on stress distribution of central incisors. Finite element method was used to simulate the clinical situation of a maxillary right central incisor restored by two different implant-abutment angulations, 15° and 25°, using two different crown materials (IPS E-Max CAD and zirconia). Methods: Two 3D finite element models were specially prepared for this research simulating the abutment angulations. Commercial engineering CAD/CAM package was used to model crown, implant abutment complex and bone (cortical and spongy) in 3D. Linear static analysis was performed by applying a 178 N oblique load. The obtained results were compared with former experimental results. Results: Implant Von Mises stress level was negligibly changed with increasing abutment angulation. The abutment with higher angulation is mechanically weaker and expected to fail at lower loading in comparison with the steeper one. Similarly, screw used with abutment angulation of 25° will fail at lower (about one-third) load value the failure load of similar screw used with abutment angulated by 15°. Conclusions: Bone (cortical and spongy) is insensitive to crown material. Increasing abutment angulation from 15° to 25°, increases stress on cortical bone by about 20% and reduces it by about 12% on spongy bone. Crown fracture resistance is dramatically reduced by increasing abutment angulation. Zirconia crown showed better performance than E-Max one.

Investigation into the Influence of Build Parameters on Failure of 3D Printed Parts

Additive manufacturing, including fused deposition modeling (FDM), is transforming the built world and engineering education. Deep understanding of parts created through FDM technology has lagged behind its adoption in home, work, and academic environments. Properties of parts created from bulk materials through traditional manufacturing are understood well enough to accurately predict their behavior through analytical models. Unfortunately, Additive Manufacturing (AM) process parameters create anisotropy on a scale that fundamentally affects the part properties. Understanding AM process parameters (implemented by program algorithms called slicers) is necessary to predict part behavior. Investigating algorithms controlling print parameters (slicers) revealed stark differences between the generation of part layers. In this work, tensile testing experiments, including a full factorial design, determined that three key factors, width, thickness, infill density, and their interactions, significantly affect the tensile properties of 3D printed test samples.

Intelligent system for interaction with virtual characters based on volumetric sensors

Dissertação de Mestrado, Engenharia Elétrica e Eletrónica, Instituto Superior de Engenharia, Universidade do Algarve, 2015

Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir

Estudio comparativo de la fiabilidad y reproducibilidad en la medición de los tamaños dentarios y las medidas de las arcadas dentarias entre registros manuales y digitales 3d obtenidos por escaneado intraoral y extraoral

Tradicionalmente, los ortodoncistas han realizado las mediciones dentales en los modelos de yeso, pero los avances tecnológicos permiten ahora a los ortodoncistas realizar esas mediciones en los modelos digitales. El propósito de este estudio fue comparar la fiabilidad y reproducibilidad de las medidas de los tamaños dentarios y las arcadas dentarias entre el método manual y los métodos digitales 3D obtenidos por un escáner intraoral CEREC Omnicam (Sirona Dental Systems) y dos escáneres extraorales: inEos X5 (Sirona Dental Systems) y Dental Scanner SMART (Open Technologies). Un modelo de yeso, un escaneado intraoral y dos modelos digitales con un escáner extraoral fueron realizadas para cada uno de los 20 sujetos. Las medidas de los tamaños dentarios, la distancia intercanina y la distancia intermolar de los modelos digitales se compararon con los correspondientes modelos de yeso (estándar de oro) Se utilizó el test de ANOVA para establecer la fiabilidad entre los cuatro métodos y el coeficiente de correlación intraclase fue calculado para determinar la reproducibilidad intra- e inter-examinador. Los resultados encontrados fueron que no existieron diferencias estadísticamente significativas entre las medidas hechas directamente en los modelos de yeso y los modelos digitales. Los coeficientes de correlación intraclase tanto intra- e inter-examinador fue alto y considerado bueno para los cuatro métodos de medición. CCI> 0.90. Se concluyó que las mediciones en los modelos digitales obtenidos con un escáner extraoral e intraoral son fiables y reproducibles

Sistema integrado de generación de mapas de profundidad para videoconferencia 3D en tiempo real

This paper presents the implementation of a high quality real-time 3D video system intended for 3D videoconferencing -- Basically, the system is able to extract depth information from a pair of images coming from a short-baseline camera setup -- The system is based on the use of a variant of the adaptive support-weight algorithm to be applied on GPU-based architectures -- The reason to do it is to get real-time results without compromising accuracy and also to reduce costs by using commodity hardware -- The complete system runs over the GStreamer multimedia software platform to make it even more flexible -- Moreover, an autoestereoscopic display has been used as the end-up terminal for 3D content visualization

Interface de app para dispositivos móveis de universidade virtual, caso da UAb

O avanço das tecnologias de informação continua a mudar os paradigmas de ensino e aprendizagem. Os meios disponíveis são cada vez mais diversificados e, com a necessidade de procurar novos estudantes e diversificar o público-alvo, as instituições de ensino superior estão a repensar os seus modelos de negócio e estratégias pedagógicas. A proliferação de dispositivos móveis catalisa uma aposta crescente no ensino a distância (EaD) no sentido de proporcionar aprendizagens em mobilidade (m-learning). No entanto, as soluções existentes para m-learning são ainda pouco adaptadas às recentes metodologias de EaD, na maioria das vezes funcionando como extensão de um ambiente virtual de aprendizagem ou com muito foco nos conteúdos. Sendo a Universidade Aberta (UAb) a única instituição de ensino superior público em Portugal de ensino a distância, com um modelo pedagógico próprio, constitui um natural caso de aplicação de tecnologia móvel em novos contextos de aprendizagem, importando por isso estudar e desenhar os mecanismos de interação mais adequados com professores e estudantes em mobilidade. Adotou-se neste trabalho a metodologia Design Science Research, tendo sido identificadas as características e comportamentos de potenciais utilizadores, e definidas as funcionalidades que devem ser disponibilizadas na primeira versão de uma aplicação para dispositivos móveis (app) no contexto do ensino a distância. É proposto o design da interface dessa app, usando o modelo da UAb como caso de aplicação, e disponibilizada uma lista de orientações para o desenvolvimento do protótipo funcional. Da investigação realizada, concluiu-se que a interface proposta constitui um modelo válido para o desenho de uma app para aprendizagens em mobilidade, no regime de ensino de uma universidade virtual. A partir deste modelo, as instituições de ensino superior podem desenvolver apps adaptando-se ao avanço das Tecnologias de Informação e Comunicação e ficarem alinhadas com as necessidades dos seus alunos e docentes, particularmente se dispuserem de oferta formativa a distância.

Trabajos 3D Realizados en la Puerta 1 del Complejo Arqueológico de Perdigoes (Portugal): estado de la cuestión

La Universidad de Málaga lleva excavando en un proyecto internacional desde 2008 en el Complejo Arqueológico de Perdigões. La incorporación de las tecnologías 3D a la arqueología es hoy en día un hecho y en este proyecto no ha sido menos. El presente artículo tiene como objetivo presentar los trabajos realizados en el Complejo Arqueológico de Perdigoes en lo que se refiere al uso de técnologías 3D.

EXPERIMENTAL INVESTIGATION INTO PARTICULATE MATTER DISTRIBUTION IN CATALYZED PARTICULATE FILTERS USING A 3D TERAHERTZ WAVE SCANNER

The particulate matter distribution (PM) trends that exist in catalyzed particulate filters (CPFs) after loading, passive oxidation, active regeneration, and post loading conditions are not clearly understood. These data are required to optimize the operation of CPFs, prevent damage to the CPFs caused by non-uniform distributions, and develop accurate CPF models. To develop an understanding of PM distribution trends, multiple tests were conducted and the PM distribution was measured in three dimensions using a terahertz wave scanner. The results of this work indicate that loading, passive oxidation, active regeneration, and post loading can all cause non-uniform PM distributions. The density of the PM in the substrate after loading and the amount of PM that is oxidized during passive oxidations and active regenerations affect the uniformity of the distribution. Post loading that occurs after active regenerations result in distributions that are less uniform than post loading that occurs after passive oxidations.

Improving Resource Management in Virtualized Data Centers using Application Performance Models

The rapid growth of virtualized data centers and cloud hosting services is making the management of physical resources such as CPU, memory, and I/O bandwidth in data center servers increasingly important. Server management now involves dealing with multiple dissimilar applications with varying Service-Level-Agreements (SLAs) and multiple resource dimensions. The multiplicity and diversity of resources and applications are rendering administrative tasks more complex and challenging. This thesis aimed to develop a framework and techniques that would help substantially reduce data center management complexity. We specifically addressed two crucial data center operations. First, we precisely estimated capacity requirements of client virtual machines (VMs) while renting server space in cloud environment. Second, we proposed a systematic process to efficiently allocate physical resources to hosted VMs in a data center. To realize these dual objectives, accurately capturing the effects of resource allocations on application performance is vital. The benefits of accurate application performance modeling are multifold. Cloud users can size their VMs appropriately and pay only for the resources that they need; service providers can also offer a new charging model based on the VMs performance instead of their configured sizes. As a result, clients will pay exactly for the performance they are actually experiencing; on the other hand, administrators will be able to maximize their total revenue by utilizing application performance models and SLAs. This thesis made the following contributions. First, we identified resource control parameters crucial for distributing physical resources and characterizing contention for virtualized applications in a shared hosting environment. Second, we explored several modeling techniques and confirmed the suitability of two machine learning tools, Artificial Neural Network and Support Vector Machine, to accurately model the performance of virtualized applications. Moreover, we suggested and evaluated modeling optimizations necessary to improve prediction accuracy when using these modeling tools. Third, we presented an approach to optimal VM sizing by employing the performance models we created. Finally, we proposed a revenue-driven resource allocation algorithm which maximizes the SLA-generated revenue for a data center.