Algaroba (Prosopis juliflora): árvore de uso múltiplo para a região semiárida brasileira.

2009

Rapid authentication of ginseng species using microchip electrophoresis with laser-induced fluorescence detection

Ginseng is one of the most expensive Chinese herbal medicines and the effectiveness of ginseng depends strongly on its botanical sources and the use of different parts of the plants. In this study, a microchip electrophoresis method coupled with the polymerase chain reaction (PCR)-short tandem repeats (STR) technique was developed for rapid authentication of ginseng species. A low viscosity hydroxypropyl methylcellulose (HPMC) solution was used as the sieving matrix for separation of the amplified STR fragments. The allele sizing of the amplified PCR products could be detected within 240 s or less. Good reproducibility and accuracy of the fragment size were obtained with the relative standard deviation for the allele sizes less than 1.0% (n = 11). At two microsatellite loci (CT 12, CA 33), American ginseng had a different allele pattern on the electropherograms compared with that of the Oriental ginseng. Moreover, cultivated and wild American ginseng can be distinguished on the basis of allele sizing. This work establishes the feasibility of fast genetic authentication of ginseng species by use of microchip electrophoresis.

Informações meteorológicas de Passo Fundo, RS: fevereiro de 2008.

2008

Reversible regeneration of molybdenum carbonyl species on an alumina thin film

The thin alumina film-supported metallic molybdenum model catalyst was prepared by thermal decomposition of MO(CO)6, and CO chemisorption on the catalyst was investigated in-situ by thermal desorption spectroscopy (TDS) and X-ray photoelectron spectroscopy (XPS). The results showed that a molybdenum-carbonyl-like species was formed on the alumina surface at low temperature by high coordination of CO with the surface metallic molybdenum nanoparticles, indicating a reversible regeneration of molybdenum carbonyl on the alumina surface. CO chemisorption on the model catalyst surface caused the Mo 3d XPS peak to shift toward higher binding energy. The formed molybdenum carbonyl species appeared at about 240 K in the TDS. The supported metallic molybdenum nanoparticles were quite different from the bulk molybdenum in chemical properties, which indicated a prominent particle-size effect of the clusters.

Anais.

2012

Supporting the case for “progressive universalism” in health visiting: Scottish mothers and health visitors’ perspectives on targeting and rationing health visiting services, with a focus on the Lothian Child Concern Model.

Aims. To explore parents and professionals’ experience of family assessment in health visiting (public health nursing), with a focus on the Lothian Child Concern Model (LCCM). Background. Health visitors (HVs) currently assess families as requiring core, additional or intensive support, and offer support at a corresponding level. The majority of families are assessed as core and receive no pro-active support beyond the early days. Previous assessment tools, consisting of checklists, have been criticised as being ineffective in identifying a range of health needs and unacceptable to parents and HVs. The LCCM model was developed and introduced in the study area to promote a partnership approach with parents and assess strengths as well as difficulties in parents’ capacity to care for their child. Methods. Qualitative methods were used. Ten mothers and twelve HVs took part in individual semi-structured interviews. Results. Most mothers were aware of the assessment process but some felt that they were not involved in the decision making process. Explaining the assessment process to parents is problematic and not all HVs do so. The assessment process was stressful for some mothers. HVs find the model useful for structuring and documenting the assessment process. Many believe that most families benefit from some support, using public health approaches. Families are often assessed as core because there are insufficient resources to support all those who meet the criteria of the additional category, and managers assess caseloads in terms of families with child protection concerns. Conclusions. The study findings support the concept of “progressive universalism” which provides a continuum of intensity of support to families, depending on need. Mothers would like better partnership working with HVs. Relevance to clinical practice. The study endorses proposed policy changes to re-establish the public health role of HVs and to lower the threshold for families to qualify for support.

Assessing training and professional development needs of library staff. Report for National Library of Health

Urquhart, C., Spink, S. & Thomas, R., Assessing training and professional development needs of library staff. Report for National Library of Health. (2005). Aberystwyth: Department of Information Studies, University of Wales Aberystwyth Sponsorship: National Library for Health (NHS Information Authority)

Public service employment and the public-private wage differential in British regions

Thomas, Dennis, Henley, Andrew, 'Public service employment and the public-private wage differential in British regions', Regional Studies (2001) 35(3) pp.229-240 RAE2008

Artesanas mostrando la elaboración de bordados en tela. Proyecto Casanare, 2007.

4 hojas : ilustraciones, fotografías a color

Making DSpace your own

PDF file

EXPERIMENTAL INVESTIGATION OF LINEAR BUBBLE DYNAMICS IN A VISCOELASTIC XANTHAN GEL

Oceanic bubble plumes caused by ship wakes or breaking waves disrupt sonar communi- cation because of the dramatic change in sound speed and attenuation in the bubbly fluid. Experiments in bubbly fluids have suffered from the inability to quantitatively characterize the fluid because of continuous air bubble motion. Conversely, single bubble experiments, where the bubble is trapped by a pressure field or stabilizing object, are limited in usable frequency range, apparatus complexity, or the invasive nature of the stabilizing object (wire, plate, etc.). Suspension of a bubble in a viscoelastic Xanthan gel allows acoustically forced oscilla- tions with negligible translation over a broad frequency band. Assuming only linear, radial motion, laser scattering from a bubble oscillating below, through, and above its resonance is measured. As the bubble dissolves in the gel, different bubble sizes are measured in the range 240 – 470 μm radius, corresponding to the frequency range 6 – 14 kHz. Equalization of the cell response in the raw data isolates the frequency response of the bubble. Compari- son to theory for a bubble in water shows good agreement between the predicted resonance frequency and damping, such that the bubble behaves as if it were oscillating in water.

Experimental quantification and modelling of attrition of infant formulae during pneumatic conveying

Infant formula is often produced as an agglomerated powder using a spray drying process. Pneumatic conveying is commonly used for transporting this product within a manufacturing plant. The transient mechanical loads imposed by this process cause some of the agglomerates to disintegrate, which has implications for key quality characteristics of the formula including bulk density and wettability. This thesis used both experimental and modelling approaches to investigate this breakage during conveying. One set of conveying trials had the objective of establishing relationships between the geometry and operating conditions of the conveying system and the resulting changes in bulk properties of the infant formula upon conveying. A modular stainless steel pneumatic conveying rig was constructed for these trials. The mode of conveying and air velocity had a statistically-significant effect on bulk density at a 95% level, while mode of conveying was the only factor which significantly influenced D[4,3] or wettability. A separate set of conveying experiments investigated the effect of infant formula composition, rather than the pneumatic conveying parameters, and also assessed the relationships between the mechanical responses of individual agglomerates of four infant formulae and their compositions. The bulk densities before conveying, and the forces and strains at failure of individual agglomerates, were related to the protein content. The force at failure and stiffness of individual agglomerates were strongly correlated, and generally increased with increasing protein to fat ratio while the strain at failure decreased. Two models of breakage were developed at different scales; the first was a detailed discrete element model of a single agglomerate. This was calibrated using a novel approach based on Taguchi methods which was shown to have considerable advantages over basic parameter studies which are widely used. The data obtained using this model compared well to experimental results for quasi-static uniaxial compression of individual agglomerates. The model also gave adequate results for dynamic loading simulations. A probabilistic model of pneumatic conveying was also developed; this was suitable for predicting breakage in large populations of agglomerates and was highly versatile: parts of the model could easily be substituted by the researcher according to their specific requirements.