Avaliação da cultura do milho submetida à hormesis

Under conservation tillage systems is critical to maintaining plant residues from previous crops on the soil surface. A technique called Hormesis aims to increase the amount of straw and also cause a delay in straw decomposition. Therefore, this study aimed to evaluate the agronomic characteristics of corn under no-tillage system subjected to Hormesis. The experiment was carried out at UNESP campus in the city of Botucatu, SP . The experimental was design in completely randomized blocks. The treatments based on the technique of Hormesis were : control (no application) , sub Gliphosate low dosage (12.5 g.ai.ha - 1 ) , sub Gliphosate average dosage (25 g. ai.ha - 1 ) , sub Gliphosate high dose (50 g. ai.ha -1 ), 2,4-D under low dose (100 g. ai.ha -1 ), 2,4-D sub average dosage (200 g. ai.ha -1 ) 2,4- D under high dosage (300 g. ai.ha -1 ) sub Verdict low dose (0.625 g. ai.ha -1 ) sub Verdict average dosage (1.25 g. ai.ha -1 ) , sub Verdict high dosage (2.5 g. ai.ha - 1 ) . In addition, the following characteristics were evaluated: plant height, first ear growth, stem diameter , ear length , number of rows per cob, cob diameter , , percentage of grains on the cob , mass of plant dry matter, and yield. The results showed that all the treatments showed no statistical difference, the maize was not affected with sub doses of herbicides applications under the field and weather conditions in which the experiment was conducted.

Seletividade de produtos fitossanitários utilizados na cultura da soja para pupas de Trichogramma pretiosum Riley, 1879 (Hymenoptera: Trichogrammatidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da diversidade genética e química e produção do epímero do ácido caurenóico em calos de croton antisyphiliticus mart

Pós-graduação em Agronomia (Horticultura) - FCA

Estudo da diversidade genética e química e produção do epímero do ácido caurenóico em calos de croton antisyphiliticus mart

Pós-graduação em Agronomia (Horticultura) - FCA

SUPERAÇÃO DE DORMÊNCIA DAS SEMENTES E CONTROLE QUÍMICO DE Momordicacharantia L.

Objetivou-se com este estudo avaliar diferentes métodos para a superação da dormência das sementes e a eficiência de herbicidas no controle químico de plantas de Momordicacharantia L. no estádio reprodutivo. O primeiro experimento constituiu-seem esquema fatorial 2 x 8 (duas épocas de coleta das sementes (2006 e 2007) e oito métodos de quebra de dormência: escarificação mecânica; imersão em ácido sulfúrico concentrado e a 50%; imersão em nitrato de potássio a 2%por três e seis horas; calor seco a 60°C; água quente a 60°C e uma testemunha sem tratamento). No segundo ensaio avaliou-se o controle da Momordicacharantia L. por meio de seis herbicidas distintos: Imazapic, Metsulfuron-methyl, Metribuzin, 2,4-D, Amicarbazone, Paraquat e uma testemunha sem aplicação de herbicidas. Em ambos os ensaios, o delineamento experimental utilizado foi o inteiramente casualizados, com quatro repetições. Após a aplicação dos tratamentos,pode-se concluir que a imersão das sementes em ácido sulfúrico concentrado por 3 minutos proporcionou uma maior porcentagem e velocidade de germinação e que o herbicida Metribuzin alcançou, embora tardiamente, um controle total das plantas de melão de São-Caetano.

Efeito de restritores hídricos sobre a germinação, comprimento da radícula e níveis de detecção de Colletotrichum gossypii var. cephalosporioides em sementes de algodão

O fungo Colletotrichum gossypii var. cephalosporioides, agente causal da ramulose do algodoeiro, é transmitido pela semente que se constitui em uma das mais importantes fontes de inóculo inicial e de introdução da doença em áreas indenes. Para que se possa identificar sua presença em lotes de sementes, é importante que se empreguem métodos de detecção rápidos e seguros. O mais empregado é o do papel de filtro, que se baseia na avaliação de sinais do patógeno desenvolvidos sobre as sementes, seguida da sua identificação morfológica. O método apresenta a desvantagem do crescimento das plântulas no período de incubação das sementes que pode favorecer o desenvolvimento de outros fungos e prejudicar a caracterização do patógeno. Para minimizar este problema vem sendo empregada a técnica da restrição hídrica. O presente trabalho teve como objetivo avaliar o efeito de três solutos em dois potenciais osmóticos, comparados ao tratamento padrão de água destilada, ao congelamento e ao 2,4 D, sobre a germinação, comprimento da radícula e detecção do agente causal da ramulose, durante o teste de sanidade. Os solutos Manitol e NaCl foram mais eficientes em inibir a germinação e favorecer a incidência do patógeno no potencial osmótico de -0,8 MPa. O KCl mostrou-se eficiente em inibir a germinação nos dois potenciais osmóticos testados, -0,6 e -0,8 MPa, porém reduziu a incidência do patógeno no potencial de -0,8 MPa. Os solutos Manitol, nos potenciais osmóticos de -0,8 e -0,6 MPa e o NaCl no potencial osmótico de -0,8 foram eficientes em reduzir o comprimento da radícula, sem interferir negativamente nos níveis de detecção de C. gossypii var. cephalosporioides, podendo ser recomendados para uso em análises sanitárias de rotina.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Proceedings of the Fifteenth Annual biochemical Engineering Symposium

This work represents the proceedings of the fifteenth symposium which convened at Colorado State University on May 24, 1985. The two day meeting was scheduled one month later than usual, i.e., after the spring semester, so that travelers from the Midwest (Iowa State University, Kansas State University and University of Missouri) could enjoy the unique mountain setting provided at Pingree Park. The background of the photograph on the cover depicts the beauty of the area. ContentsGreg Sinton and S.M. Leo, KSU. Models for the Biodegration of 2.4-D and Related Xenobiotic Compounds. V. Bringi, CSU. Intrinsic Kinetics from a Novel Immobilized Cell CSTR. Steve Birdsell, CU. Novel Microbial Separation Techniques. Mark Smith, MU. Kinetic Characterization of Growth of E. coli on Glucose. Michael M. Meagher, ISU. Kinetic Parameters of Di- and Trisaccharaide Hydrolysis by Glucoamylase II. G.T. Jones and A.K. Ghosh Hajra, KSU. Modeling and Simulation of Legume Modules with Reactive Cores and Inert Shells. S.A. Patel and C.H. Lee, KSU. Energetic Analysis and Liquid Circulation in an Airlift Fermenter. Rod R. Fisher, ISU. The Effects of Mixing during Acid Addition of Fractionally Precipitated Protein. Mark M. Paige, CSU. Fed-batch Fermentations of Clostridium acetobutylicum. Michael K. Dowd, ISU. A Nonequilibirium Thermodynamic Description of the Variation of Contractile Velocity and Energy Use in Muscle. David D. Drury, CSU. Analysis of Hollow Fiber Bioreactor Performance for MAmmalian Cells by On-Line MMR. H.Y. Lee, KSU. Process Analysis of Photosynthetic Continuous Culture Systems. C.J. Wang, MU. Kinetic Consideration in Fermentation of Cheese Whey to Ethanol.

Proceedings of the Sixteenth Annual Biochemical Engineering Symposium

This volume represents the proceedings of the Sixteenth Annual Biochemical Engineering Symposium held at Kansas State University on April 26, 1986. Some of the papers describe the progress of ongoing projects, and others contain the results of completed projects. Only brief summaries are given of many of the papers that will be published in full elsewhere. ContentsEnd-Product Inhibition of the Acetone-Butanol Fermentation—Bob Kuhn, Colorado State University Effect of Multiple Substrates in Ethanal Fermentations from Cheese Whey—C.J. Wang, University of Missouri Extraction and Fermentation of Ensiled Sweet Sorghum—Karl Noah, Colorado State University Removal of Nucleic Acids from Bakers' Yeast—Richard M. Cordes, Iowa State University Modeling the Effects of Plasmid Replication and Product Repression on the Growth Rate of Recombinant Bacteria—William E. Bentley, University of Colorado Indirect Estimates of Cell Concentrations in Mass Cultivation of Bacterial Cells—Andrew Fisher, University of Missouri A Mathematical Model for Liquid Recirculation in Airlift Columns—C.H.Lee, Kansas State University Characterization of Imperfect Mixing of Batch Reactors by Two Compartment Model—Peter Sohn, University of Missouri First Order Breakage Model for the Degradation of Pullalan in the Batch Fermentor—Stephen A. Milligan, Kansas State University Synthesis and Nuclear Magnetic Resonance of 13C-Labeled Amylopectin and Maltooligosaccharides—Bernard Y. Tao, Iowa State University Preparation of Fungal Starter Culture in Gas Fluidized Bed Reactor—Pal Mihaltz, Colorado State University Yeast Flocculation and Sedimentation—David Szlag, University of Colorado Protein Enrichment of Extrusion Cooked Corn by Solid Substrate Fermentation—Lucas Alvarez-Martinez, Colorado State University Optimum Design of a Hollow Fiber Mammalian Cell Reactor—Thomas Chresand, Colorado State University Gas Chromatography and Nuclear Magnetic Resonance of Trifluoroacetylated Carbohydrates—Steven T. Summerfelt, Iowa State University Kinetic and Bioenergetic Considerations for Modeling Photosynthetic Microbial P~ocesses in Producing Biomass and Treating Wastewater—H. Y. Lee, Kansas State University Mathematical Modeling and Simulation of Bicarbonate-Limited Photsynthetic Growth in Continuous Culture—Craig Curless, Kansas State University Data Acquisition and Control of a Rotary Drum Solid State Fermentor—Mnasria A. Habib, Colorado State University Biodegradation of 2,4-Dichlorophenoxyacetic Acid (2,4-D)—Greg Sinton, Kansas State University

Proceedings of the Seventeenth Annual Biochemical Engineering Symposium

This is the seventeenth of a series of symposia devoted to talks by students about their biochemical engineering research. The first, third, fifth, ninth, twelfth, and sixteenth were at Kansas State University, the second and fourth were at the University of Nebraska-Lincoln, the sixth was in Kansas City and was hosted by Iowa State University, the seventh, tenth, thirteenth, and seventeenth were at Iowa State University, the eighth and fourteenth were at the University of Missouri–Columbia, and the eleventh and fifteenth were at Colorado State University. Next year's symposium will be at the University of Colorado. Symposium proceedings are edited by faculty of the host institution. Because final publication usually takes place elsewhere, papers here are brief, and often cover work in progress. ContentsThe Effect of Polymer Dosage Conditions on the Properties of ProteinPolyelectrolyte Precipitates, K. H. Clark and C. E. Glatz, Iowa State University An Immobilized Enzyme Reactor/Separator for the Hydrolysis of Casein by Subtilisin Carlsberg, A. J. Bream, R. A. Yoshisato, and G. R. Carmichael, University of Iowa Cell Density Measurements in Hollow Fiber Bioreactors, Thomas Blute, Colorado State University The Hydrodynamics in an Air-Lift Reactor, Peter Sohn, George Y. Preckshot, and Rakesh K. Bajpai, University of Missouri–Columbia Local Liquid Velocity Measurements in a Split Cylinder Airlift Column, G. Travis Jones, Kansas State University Fluidized Bed Solid Substrate Trichoderma reesei Fermentation, S. Adisasmito, H. N. Karim, and R. P. Tengerdy, Colorado State University The Effect of 2,4-D Concentration on the Growth of Streptanthus tortuosis Cells in Shake Flask and Air-Lift Permenter Culture, I. C. Kong, R. D. Sjolund, and R. A. Yoshisato, University of Iowa Protein Engineering of Aspergillus niger Glucoamylase, Michael R. Sierks, Iowa State University Structured Kinetic Modeling of Hybidoma Growth and Monoclonal Antibody Production in Suspension Cultures, Brian C. Batt and Dhinakar S. Kampala, University of Colorado Modelling and Control of a Zymomonas mobilis Fermentation, John F. Kramer, M. N. Karim, and J. Linden, Colorado State University Modeling of Brettanomyces clausenii Fermentation on Mixtures of Glucose and Cellobiose, Max T. Bynum and Dhinakar S. Kampala, University of Colorado, Karel Grohmann and Charles E. Yyman, Solar Energy Research Institute Master Equation Modeling and Monte Carlo Simulation of Predator-Prey Interactions, R. 0. Fox, Y. Y. Huang, and L. T. Fan, Kansas State University Kinetics and Equilibria of Condensation Reactions Between Two Different Monosaccharides Catalyzed by Aspergillus niger Glucoamylase, Sabine Pestlin, Iowa State University Biodegradation of Metalworking Fluids, S. M. Lee, Ayush Gupta, L. E. Erickson, and L. T. Fan, Kansas State University Redox Potential, Toxicity and Oscillations in Solvent Fermentations, Kim Joong, Rakesh Bajpai, and Eugene L. Iannotti, University of Missouri–Columbia Using Structured Kinetic Models for Analyzing Instability in Recombinant Bacterial Cultures, William E. Bentley and Dhinakar S. Kompala, University of Colorado

Evaluación de tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido)

En Cuba, las arvenses que afectan al cultivo de la caña de azúcar son una de las causas fundamentales de los bajos rendimientos agrícolas y su control constituye unas de las principales partidas de gastos. En general, se aplican los herbicidas, así como otros métodos de control, sin tener en cuenta el tipo de suelo y las características de estas plantas. Sobre el manejo de arvenses no existen trabajos de investigación que aborden aspectos de eficiencia energética de las producciones y daños al ambiente. Por lo antes señalado, el objetivo de esta investigación fue evaluar diversas tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido), en cepas de primavera y retoño, en tres tipos de suelos, con el propósito de obtener producciones sustentables. El área de estudio se localizó en los campos de la Empresa Azucarera del municipio “Majibacoa”, provincia de Las Tunas (oriente de Cuba), que posee condiciones edafoclimáticas que abundan a lo largo del país. Los tres tipos de suelos más representativos son Fersialítico Pardo Rojizo ócrico, Pardo Mullido y Vertisol Crómico gléyco. En dicha área se han identificado 31 especies de arvenses, 16 de la clase Liliopsida y 15 de la Magnoliopsida. En un primer grupo de experimentos, se desarrollaron nueve ensayos de campo para evaluar la efectividad de herbicidas y mezclas de estos en el manejo de arvenses en el cultivo de la caña de azúcar, tanto en cepas de primavera como de retoño, en los tres tipos de suelos. Se establecieron parcelas de 80 m2 distribuidas en bloques al azar con cuatro réplicas. La efectividad se evaluó por medio del porcentaje de cobertura por arvenses y la fitotoxicidad provocada a las plantas de caña, teniendo en cuenta el coste asociado a cada tratamiento. En aplicaciones preemergentes en caña planta de primavera, el herbicida más eficiente fue el Isoxaflutole con dosis de 0,15; 0,20 y 0,25 kg.ha-1 de producto comercial (pc) en los suelos Fersialítico, Pardo y Vertisol respectivamente. En aplicaciones postemergentes tempranas la mezcla más eficiente fue la de Isoxaflutole + Ametrina +2,4-D con las dosis de Isoxaflutole citadas anteriormente. En aplicaciones preemergentes en cepa de retoño, el herbicida más eficiente fue el Isoxaflutole a dosis de 0,20 kg.ha-1 pc para el suelo Fersialítico y a 0,25 kg.ha-1 pc para los suelos Pardo y Vertisol. En un segundo grupo, se realizaron seis ensayos de campo distribuidos en dos fases. En la primera fase, se desarrollaron tres experimentos, uno por cada tipo de suelo, para evaluar la eficiencia de nueve tecnologías de manejo de arvenses (químicas y físicas combinadas) en cepa de primavera de caña de azúcar. En la siguiente fase, los tres ensayos restantes (uno por tipo de suelo) evaluaron tecnologías de manejo de arvenses durante dos ciclos de producción de caña de azúcar (etapa de primavera y retoño). En la etapa de primavera se aplicó la tecnología más eficiente de los tres experimentos anteriores y durante la etapa de retoño se evaluaron otras nueve tecnologías propias de este tipo de cepa. En estos experimentos los diferentes tratamientos se aplicaron en franjas distribuidas al azar con cuatro réplicas. En las tecnologías evaluadas se emplearon los herbicidas y mezclas que resultaron más eficientes en el primer grupo de experimentos. En cada caso, se evaluaron la eficiencia energética de la producción de azúcar y otros derivados, la resistencia a la penetración de los suelos, la carga contaminante hacia la atmósfera producto de la combustión del diésel y los beneficios al aplicar las diferentes tecnologías. En la primera fase (cepa de primavera), la tecnología con mejor resultado fue la aplicación preemergente de Isoxaflutole inmediatamente después de la plantación, seguida de descepe químico con Glufosinato de amonio, más labor con grada múltiple aproximadamente a los 80 días de la plantación y aplicación pre-cierre con Glufosinato de amonio. En la segunda fase (dos ciclos del cultivo), el mejor resultado se obtuvo cuando en la etapa de retoño se realizó una aplicación preemergente de Isoxaflutole, descepe químico con Glufosinato de amonio y aplicación pre-cierre con este mismo herbicida. En los tres tipos de suelos durante los dos ciclos, la eficiencia energética tuvo valores de 7,2 - 7,5, la resistencia a la penetración 1,2 - 1,5 MPa, la carga contaminante hacia la atmósfera fue de 63,3 - 64,9 kg.t-1 de caña cosechada y beneficios de 8.324 - 8.455 pesos cubanos por hectárea. Este estudio demuestra que un control eficiente de las arvenses debe tener en cuenta necesariamente el tipo de suelo. Así, en los Vertisoles, con mayor contenido en arcilla, se requieren mayores dosis de Isoxaflutole y la eficiencia energética de la producción es menor. La persistencia de ciertas arvenses, especialmente de la clase Liliopsida, requiere de un manejo integrado que incluya diferentes tipos de herbicidas. ABSTRACT In Cuba, weeds affecting the sugarcane are one of the main causes of low agricultural yields, and their control constitutes some of the main items of expenditure. In general, herbicides are applied, as well as other control methods, without keeping in mind the soil type and the characteristics of these plants. Moreover, weed control research approaching aspects about energy efficiency of the crop production, and environmental damages are missing. Hence, the objective of this investigation was to evaluate diverse technologies of weed handling in sugarcane (Saccharum spp. hybrid), both in spring cane plant and ratoon, in three types of soils, with the purpose of obtaining sustainable productions. The study area was located in the fields of the Sugar Enterprise of the Municipality "Majibacoa”, Las Tunas province (east of Cuba) that possesses ecological conditions that are plentiful along the country. The three more representative types of soils are Fersialitic, Brown, and Vertisol. In this area 31 weeds species have been identified, 16 of the Class Liliopsida and 15 of the Magnoliopsida. In a first group of experiments, nine field rehearsals were developed to evaluate the effectiveness of herbicides and mixtures of these for weed handling in sugarcane, in spring cane plants as well as in ratoon, in the three types of soils. Plots of 80 m-2 were distributed at random blocks with four replications. The effectiveness was evaluated by means of the covering percentage by weeds and the provoked toxicity to the cane plants, keeping in mind the cost associated to each treatment. In preemergence applications in spring cane plant, the most efficient herbicide was the Isoxaflutole with dose of 0.15; 0.20 and 0.25 kg.ha-1 of commercial product (pc) in the soils Fersialítico, Brown and Vertisol respectively. In early postemergence applications the most efficient mixture was that of Isoxaflutole + Ametrina + 2,4-D with the doses of Isoxaflutole mentioned previously. In preemergence applications in ratoon, the most efficient herbicide was the Isoxaflutole at dose of 0.20 kg.ha-1 pc for the soil Fersialític and to 0.25 kg. ha-1 pc for the Brown soil and Vertisol. In a second group, six field rehearsals distributed in two phases were carried out. In the first phase, three experiments were developed, one for each soil type, to evaluate the efficiency of nine technologies of weed handling in spring cane plant. In the following phase, the three remaining rehearsals (one for each soil type) diverse technologies of weed handling were evaluated during two cycles of sugarcane production (spring stage and ratoon). In the spring stage the most efficient technology in the three previous experiments was applied and during ratoon stage other nine technologies were evaluated. In these experiments the different treatments were applied in fringes distributed at random with four replicas. In the evaluated technologies the herbicides and mixtures were used selecting those that were more efficient in the first group of experiments. In each case, the energy efficiency of the sugar production and other derivatives, the soil penetration resistance, the polluting load toward the atmosphere product of the combustion, and the benefits when applying the different technologies were all evaluated. In the first phase (spring cane plant), the technology with better result was the preemergence application of Isoxaflutole immediately after the plantation, followed by chemical eradication with Ammonia Glufosinate, hoeing work with multiple tier approximately to the 80 days of the plantation and pre-closing application with Ammonia Glufosinate. In the second phase (two cycles of the cultivation), the best result was obtained when a preemergence application of Isoxaflutole was carried out in sprout's stage, chemical eradication with Ammonia Glufosinate and pre-closing application with this same herbicide. In the three types of soils during the two cycles, the energy efficiency achieved values of 7.2 to 7.5, the resistance to the penetration 1.2 - 1.5 MPa, the polluting load toward the atmosphere was of 63.3 - 64.9 kg.t-1 of the harvested cane and the obtained benefits of 8,324 - 8,455 Cuban pesos per hectare. This study demonstrates that an efficient control of the weeds should necessarily keep in mind the soil type. This way, in the Vertisols, with more clay content, bigger dose of Isoxaflutole is required and the energy efficiency of the production is smaller. The persistence of certain weeds, especially of the class Liliopsida, requires of an integrated handling him to include different types of herbicides.

Conservación de plantas regeneradas in vitro y análisis de la variación somaclonal de Cinchona officinalis, Linneo

Cinchona officinalis (Rubiaceae), especie endémica del Valle de Loja, ubicado en la región sur del Ecuador, es un recurso forestal de importancia medicinal y ecológica, además la especie ha sido catalogada como planta nacional y es un ícono de la región sur por su aporte a la farmacopea mundial. Esta especie, entre los siglos XVII-XIX sufrió una gran presión en sus poblaciones debido a la extracción masiva de la corteza para la cura del paludismo. Aunque la actividad extractiva generó grandes ingresos a la Corona Española y a la región Sur del Ecuador, ésta fue poco o nada sustentable ecológicamente, provocando la desaparición de la especie en muchos sitios de la provincia, pues, en su momento, no se consideraron alternativas de recuperación de las poblaciones naturales. Actualmente la extracción y consumo de la corteza en la zona de origen es baja o nula, sin embargo esta zona enfrenta nuevas amenazas. La deforestación a causa de proyectos de desarrollo en infraestructuras, la práctica de actividades agrícolas y de ganadería, y los efectos del cambio climático han ocasionado, en estos últimos años, la fragmentación de los ecosistemas. La mayoría de los bosques del sur del Ecuador se han convertido en parches aislados (los bosques en los que se distribuye C. officinalis no son la excepción) siendo esta la principal causa para que la especie se encuentre en estado de amenaza. Los individuos de la especie tienen una alta capacidad de rebrote y producen semillas durante todo el año; sin embargo la capacidad germinativa y la tasa de sobrevivencia son bajas, además de estas dificultades la especie requiere de la asociación con otras especies vegetales para su desarrollo, lo cual ha limitado su distribución en pequeños parches aislados. Con esta problemática, la recuperación natural de las poblaciones es una necesidad evidente. Varios trabajos y esfuerzos previos se han realizado a nivel local: i. Identificación de la distribución actual y potencial; ii. Determinación de la fenología y fructificación iii. Programas de educación ambiental, iv. Análisis moleculares para determinar la diversidad genética. v. Ensayos de propagación vegetativa; y otras acciones de tipo cultural. No obstante, el estado de conservación y manejo de las poblaciones naturales no ha mejorado significativamente, siendo necesaria la aplicación de estrategias integradas de conservación in situ y ex situ, que permitan la recuperación y permanencia de las poblaciones naturales a largo plazo. El presente trabajo tiene como fin dar alternativas para el cultivo de tejidos in vitro de Cinchona officinalis centrados en la propagación masiva a partir de semillas, análisis de la fidelidad genética y alternativas de conservación de tejidos. Los objetivos específicos que se plantean son: i. Analizar el proceso de germinación y proliferación in vitro. ii. Evaluar la estabilidad genética en explantes cultivados in vitro, mediante marcadores ISSR. iii. Establecer protocolos de conservación in vitro mediante limitación del crecimiento y criopreservación de segmentos nodales y yemas. Los resultados más significativos de esta investigación fueron: i. El desarrollo de protocolos eficientes para mejorar los porcentajes de germinación y la proliferación de brotes en explantos cultivados in vitro. Para evaluar el efecto de los fenoles sobre la germinación, se determinó el contenido total de fenoles y el porcentaje de germinación en semillas de C. officinalis comparados con una especie de control, C. pubescens. Para inducir a proliferación, se utilizaron segmentos nodales de plántulas germinadas in vitro en medio Gamborg (1968) suplementado con diferentes combinaciones de reguladores de crecimiento (auxinas y citoquininas). Los resultados obtenidos sugieren que el contenido de compuestos fenólicos es alto en las semillas de C. officinalis en comparación con las semillas de C. pubescens. Estos fenoles pueden eliminarse con peróxido de hidrógeno o con lavados de agua para estimular la germinación. La formación de nuevos brotes y callos en la mayoría de las combinaciones de reguladores de crecimiento se observó en un período de 45 días. El mayor porcentaje de proliferación de brotes, formación de callos y presencia de brotes adventicios se obtuvo en medio Gamborg (B5) suplementado con 5.0 mg/l 6-bencil-aminopurina y 3.0 mg/l de ácido indol-3-butírico. ii. La evaluación de la fidelidad genética de los explantes obtenidos con distintas combinaciones de reguladores de crecimiento vegetal y diversos subcultivos. Se realizó el seguimiento a los explantes obtenidos de la fase anterior, determinando el índice de multiplicación y analizando la fidelidad genética de los tejidos obtenidos por las dos vías regenerativas: brotación directa y regeneración de brotes a partir de callos. Este análisis se realizó por amplificación mediante PCR de las secuencias ubicadas entre microsatélites-ISSR (Inter simple sequence repeat). El medio Gamborg (B5) con 3.0 mg/l de AIB y 5.0 mg/l de BAP usado como medio de inducción en la primera etapa de cultivo generó el mayor índice de proliferación (11.5). Un total de 13 marcadores ISSR fueron analizados, 6 de éstos fueron polimórficos. El mayor porcentaje de variación somaclonal fue inducido en presencia de 1.0 mg/l 2,4-D combinado con 0.2 mg/l Kin con un 1.8% en el segundo sub-cultivo de regeneración, la cual incrementó a 3.6% en el tercer sub-cultivo. Todas las combinaciones con presencia de 2,4-D produjeron la formación de callos y presentaron variación genética. Por su parte la fidelidad genética se mantuvo en los sistemas de propagación directa a través de la formación de brotes a partir de meristemos preformados. iii. El establecimiento de protocolos de conservación in vitro y crioconservación de segmentos nodales y yemas. Para la conservación limitando el crecimiento, se cultivaron segmentos nodales en los medios MS y B5 en tres concentraciones de sus componentes (25, 50 y 100%); y en medio B5 más agentes osmóticos como el manitol, sorbitol y sacarosa en diferentes concentraciones (2, 4 y 8%); los cultivos se mantuvieron por 12 meses sin subcultivos. Para el establecimiento de protocolos para la crioconservación (paralización del metabolismo) se usaron yemas axilares y apicales a las cuales se les aplicaron los métodos de encapsulación-deshidratación y vitrificación. La efectividad de los protocolos usados se determinó en función de la sobrevivencia, reducción del crecimiento y regeneración. Los resultados obtenidos en este apartado reflejan que un crecimiento limitado puede mantener tejidos durante 12 meses de almacenamiento, usando medio B5 más manitol entre 2 y 8%. En los protocolos de crioconservación, se obtuvo el mayor porcentaje de recuperación tras la congelación en NL en el tratamiento control seguido por el método crioprotector de encapsulación-deshidratación. Este trabajo brinda alternativas para la propagación de C. officinalis bajo condiciones in vitro, partiendo de material vegetal con alta diversidad genética. El material propagado puede ser fuente de germoplasma para la recuperación y reforzamiento de las poblaciones naturales así como una alternativa de producción para las comunidades locales debido a la demanda actual de corteza de la zona de origen para la elaboración de agua tónica. ABSTRACT Cinchona officinalis (Rubiaceae) is endemic to the Loja Valley, located in the southern area of Ecuador. The importance of this plant as medical and ecological resource is so great that it has been designated as the national flower and is an icon of the southern region for its contribution to the world pharmacopoeia. Between XVII-XIX centuries its population suffered great reduction due to massive harvesting of the bark to cure malaria. Although extraction activity generated large revenues to the Spanish Crown and the southern region of Ecuador, this was not ecologically sustainable, causing the disappearance of the species in many areas of the province, because during that time alternatives to prevent extinction and recover natural populations were not taken in account. Currently the extraction and consumption of bark in the area of origin is almost absent, but this species faces new threats. Deforestation due to infrastructure development, the practice of farming and ranching, and the effects of climate change had led to the fragmentation of ecosystems during the recent years. Most of the forests of southern Ecuador have become isolated patches, including those where C. officinalis is diffused. The lack of suitable habitat is today the main threat for the species. The species has a high capacity for regeneration and produces seeds throughout the year, but the germination rate is low and the growth is slow. In addition, the species requires the association with other plant species to develop. All these factors had limited its distribution to small isolated patches. The natural recovery of populations is essential to face this problem. Several studies and previous efforts had been made at local level: i. Identification of current and potential distribution; ii. Phenology determination. iii. Environmental education programs, iv. Molecular analisis to determine the genetic diversity. v. Testing of vegetative propagation; and other actions of cultural nature. Despite these efforts, the state of conservation and management of natural populations has not improved significantly. Implementation of integrated in situ and ex situ conservation strategies for the recovery and permanence of long-term natural populations is still needed. This work aims to provide alternatives for in vitro culture of tissue of Cinchona officinalis focused on mass propagation from seeds, genetic fidelity analysis and tissue conservation alternatives. The specific aims are: i. Analyze the process of germination and proliferation in vitro. ii. To evaluate the genetic stability of the explants cultured in vitro by ISSR markers. iii. Establish protocols for in vitro conservation by limiting growth and cryopreservation of nodal segments and buds. The most significant results of this research were: i. The development of efficient protocols to improve germination rates and proliferation of buds in explants cultured in vitro. To study the effect of phenols on germination, the total phenolic content and percentage germination was measured in C. officinalis and in a control species, C. pubescens, for comparison. The content of phenolic compounds in C. officinalis seeds is higher than in C. pubescens. These phenols can be removed with hydrogen peroxide or water washes to stimulate germination. To analyze the regeneration, we used nodal explants from seedlings germinated in vitro on Gamborg medium (1968) supplemented with different combinations of growth regulators (auxins and cytokinins) to induce proliferation. The formation of new shoots and calluses was observed within a period of 45 days in most combinations of growth regulators. The highest percentage of shoot proliferation, callus formation and adventitious buds were obtained in B5 medium supplemented with 5.0 mg/l 6-benzyl-aminopurine and 3.0 mg/l indole-3-butyric acid. ii. Evaluating genetic fidelity explants obtained with various combinations of plant growth regulators and different subcultures. The genetic fidelity was analyzed in tissues obtained by the two regenerative pathways: direct sprouting and shoot regeneration from callus. This analysis was performed by PCR amplification of the sequences located between microsatellite-ISSR (Inter Simple Sequence Repeat). Among a total of 13 ISSR markers analyzed, 6 were polymorphic. The highest percentage of somaclonal variation was induced in the presence of 1.0 mg/l 2,4-D combined with 0.2 mg/l Kin with 1.8% in the second round of regeneration, and increased to 3.6% in the third round. The presence of 2,4-D induced genetic variation in all the combinations of growth regulators. Meanwhile genetic fidelity remained systems propagation through direct shoot formation from meristems preformed. iii. Establishing conservation protocols in vitro and cryoconservation of nodal segments and buds. For medium-term conservation (limited growth) nodal segments were cultured in MS and B5 media at three concentrations (25, 50 and 100%); we tested B5 medium with different concentrations of osmotic agents such as mannitol, sorbitol and sucrose (2, 4 and 8%); cultures were maintained for 12 months with regular subculturing. To establish protocols for cryoconservation (cessation of metabolism) different methods of encapsulation-dehydration and vitrification were applied to axillary and apical buds. The effectiveness of the used protocols is determined based on the survival, growth and regeneration success. The results show that these tissues can be maintained in storage for 12 months, using B5 medium plus mannitol between 2 and 8%. The cryoconservation protocol with highest percentage of recovery was obtained by contral treatment, followed by freezing in NL with encapsulation-dehydration method. This work provides alternatives for the propagation in vitro of C. officinalis, starting from plant material with high genetic diversity. The obtained material represents a source of germplasm to support the recovery and strengthening of natural populations as well as a creation of alternative sources for local communities due to the current demand of bark for the preparation of tonic water.

Evaluación de mezclas de herbicidas en el control de arvenses, en el cultivo de la caña de azúcar en tres tipos de suelos de Majibacoa, Las Tunas

La investigación se desarrolló en áreas de producción de la Empresa Azucarera Majibacoa de la provincia Las Tunas, para la evaluación de la efectividad de mezclas de herbicidas en el control de arvenses en plantaciones de caña de azúcar, variedad C 86-503, en caña planta de primavera, en aplicaciones pre-post-emergentes, en tres tipos de suelos: Fersialítico pardo rojizo, Pardo mullido y Vertisol crómico gléyco. En el área experimental se trazaron parcelas, según un diseño de bloques al azar con cuatro réplicas, la aplicación de las mezclas se realizó con asperjadora manual Super Agro-16 (MATABI), 20 días después de la plantación, cuando las yemas de las estacas de caña de azúcar habían brotado, con presencia de algunas arvenses. Se determinaron las especies de arvenses presentes en el área y las que aparecieron después de las aplicaciones, el porcentaje de cobertura de las mismas y la fitotoxicidad provocada por la mezcla de herbicidas, así como sus costos y la cantidad de días que se mantuvo limpio el campo. Se evaluaron seis mezclas: Ametrina + Diurón; Ametrina + 2,4-D y cuatro dosis Merlin + Ametrina + 2,4-D. Las mayores dosis de Merlin (Isoxaflutole): 0,150; 0,200 y 0,250 kg ha-1 resultaron las más efectivas en el control de arvenses, provocando una ligera fitotoxicidad en forma de pequeños puntos de color blanco en las hojas de la caña, los suelos más arcillosos (Vertisol y Pardo) requirieron las mayores dosis. Con estas dosis de Merlin se obtienen las mezclas más costosas; sin embargo, ellas mantuvieron un mayor período de tiempo limpio el campo de caña, lo que provocó que el costo por día limpio fuera menor

Xyloglucan Octasaccharide XXLGol Derived from the Seeds of Hymenaea courbaril Acts as a Signaling Molecule1

Treatment of the xyloglucan isolated from the seeds of Hymenaea courbaril with Humicola insolens endo-1,4-β-d-glucanase I produced xyloglucan oligosaccharides, which were then isolated and characterized. The two most abundant compounds were the heptasaccharide (XXXG) and the octasaccharide (XXLG), which were examined by reference to the biological activity of other structurally related xyloglucan compounds. The reduced oligomer (XXLGol) was shown to promote growth of wheat (Triticum aestivum) coleoptiles independently of the presence of 2,4-dichlorophenoxyacetic acid (2,4-D). In the presence of 2,4-D, XXLGol at nanomolar concentrations increased the auxin-induced response. It was found that XXLGol is a signaling molecule, since it has the ability to induce, at nanomolar concentrations, a rapid increase in an α-l-fucosidase response in suspended cells or protoplasts of Rubus fruticosus L. and to modulate 2,4-D or gibberellic acid-induced α-l-fucosidase.

Co-Permeability of 3H-Labeled Water and 14C-Labeled Organic Acids across Isolated Plant Cuticles1 : Investigating Cuticular Paths of Diffusion and Predicting Cuticular Transpiration

Penetration of 3H-labeled water (3H2O) and the 14C-labeled organic acids benzoic acid ([14C]BA), salicylic acid ([14C]SA), and 2,4-dichlorophenoxyacetic acid ([14C]2,4-D) were measured simultaneously in isolated cuticular membranes of Prunus laurocerasus L., Ginkgo biloba L., and Juglans regia L. For each of the three pairs of compounds (3H2O/[14C]BA, 3H2O/[14C]SA, and 3H2O/[14C]2,4-D) rates of cuticular water penetration were highly correlated with the rates of penetration of the organic acids. Therefore, water and organic acids penetrated the cuticles by the same routes. With the combination 3H2O/[14C]BA, co-permeability was measured with isolated cuticles of nine other plant species. Permeances of 3H2O of all 12 investigated species were highly correlated with the permeances of [14C]BA (r2 = 0.95). Thus, cuticular transpiration can be predicted from BA permeance. The application of this experimental method, together with the established prediction equation, offers the opportunity to answer several important questions about cuticular transport physiology in future investigations.