Case study analysis for the development and implementation of sustainable housing in the kingdom of Saudi Arabia

Rapid urbanization in developing countries is putting stress on current infrastructure, which is resulting in the rapid consumption of natural resources to cope with the increasing demand of the population. Saudi Arabia is one of the developing countries facing rapid urbanization where its infrastructure is facing a huge demand by the increasing urbanization levels of its major cities. Developing sustainable housing in Saudi Arabia is a must for the preservation of resources for future generations of the region and of the world. In the coming years, several resources (such as fossil fuels and natural water) will be facing shortage if not managed properly. Providing electricity for housing in Saudi Arabia is one of the biggest challenges facing the country, where it is estimated that by 2050 energy demand in the Kingdom will be approximately 120 GW, and to meet this growing demand, 8 million barrels of oil per day will be required. However, implementation of Sustainable Housing in Saudi is still problematic to reach the desired goals of various key Saudi stakeholders. This paper analyses three case studies that have adopted sustainable construction methods and compares them to traditional non-sustainable houses. The outcome suggests that there is a viable chance for development of sustainable housing in the region if supported by the government with less red tape to deal with. This paper recommends that the Saudi governments should mandate new laws to reduce the overall consumption of energy and water to reduce the overall consumption of natural resources to secure the future generation’s demand of natural resources.

The role of the Saudi government and the Saudi building code in implementing sustainable housing construction in Saudi Arabia

The housing construction industry in Saudi Arabia has been booming rapidly in the past two decades. This boom has faced multiple downfalls in relation to government regulations and building codes, one of which is the application of sustainable methods to the housing construction. This paper sheds some light on the current role of the Saudi government and the role of the Saudi Building Code (SBC) in the housing construction industry. The methodology utilised in this paper was a Delphi survey that was distributed to twenty-five key stakeholders in the housing construction industry in Saudi Arabia. The results indicate that there is a lack of integration between the Saudi Building Code and the current construction methods used in the current construction industry. Some factors and elements are recommended to be incorporated into the Saudi Building Code and to be adopted as regulations in the Saudi housing construction industry.

BIM-based lifecycle planning and specifications for sustainable cities of the future: A conceptual approach

Annually, several million tonnes of waste are produced from reworks, demolition, and use of substandard materials. Building Information Modelling (BIM), a digital representation of facilities and their constituent data, is a viable means of addressing some concerns about the impacts of these processes. BIM functionalities can be extended and combined with rich building information from specifications and product libraries, for efficient, streamlined design and construction. This paper conceptualises a framework for BIM-knowledge transfer from advanced economies for adaptation and use in urban development works in developing nations using the Sydney Down Under and Lagos Eko Atlantic projects as reference points. We present a scenario that highlights BIM-based lifecycle planning/specifications as agents of sustainable construction (in terms of cost and time) crucial to the quality of as-built data from early on in city development. We show how, through the use of BIM, city planners in developing nations can avoid high, retrospective (and sometimes wasteful) maintenance costs and leapfrog infrastructure management standards of advanced economies. Finally, this paper illustrates how BIM can address concerns about economic sustainability during city development in developing countries by enriching model objects with specification information sourced from a product library.

The functional significance of fruit exocarp on host selection and oviposition by Queensland fruit fly, Bactrocera tryoni (Froggatt) (Tephritidae: Diptera)

Queensland fruit fly is Australia's most serious insect pest of horticulture. The fly lays its eggs into fruit, where they hatch into maggots which destroy the fruit. Understanding egg laying behaviour, known as oviposition, is a critical but under-researched aspect of fruit fly biology. This thesis focused on three aspects of oviposition: the role of fruit peel as a physical barrier to oviposition; the quality of fruit for maggot development; and the structure and wear of the egg laying organ – the ovipositor. Results showed that flies selected fruit based on their suitability for offspring survival, not because of the softness or hardness of fruit peel. Previously reported use of holes or wounds in fruit peel by ovipositing females was determined to be a mechanism which saved the female time, not a mechanism to reduce ovipositor wear. The results offer insights into the evolution of host use by fruit flies and their sustainable management.

Flexural–torsional buckling behaviour and design of cold-formed steel compression members at elevated temperatures

Current design rules for the member capacities of cold-formed steel columns are based on the same non-dimensional strength curve for both fixed and pinned-ended columns at ambient temperature. This research has investigated the accuracy of using current ambient temperature design rules in Australia/New Zealand (AS/NZS 4600), American (AISI S100) and European (Eurocode 3 Part 1.3) standards in determining the flexural–torsional buckling capacities of cold-formed steel columns at uniform elevated temperatures using appropriately reduced mechanical properties. It was found that these design rules accurately predicted the member capacities of pin ended lipped channel columns undergoing flexural torsional buckling at elevated temperatures. However, for fixed ended columns with warping fixity undergoing flexural–torsional buckling, the current design rules significantly underestimated the column capacities as they disregard the beneficial effect of warping fixity. This paper has therefore recommended the use of improved design rules developed for ambient temperature conditions to predict the axial compression capacities of fixed ended columns subject to flexural–torsional buckling at elevated temperatures within AS/NZS 4600 and AISI S100 design provisions. The accuracy of the proposed fire design rules was verified using finite element analysis and test results of cold-formed lipped channel columns at elevated temperatures except for low strength steel columns with intermediate slenderness whose behaviour was influenced by the increased nonlinearity in the stress–strain curves at elevated temperatures. Further research is required to include these effects within AS/NZS 4600 and AISI S100 design rules. However, Eurocode 3 Part 1.3 design rules can be used for this purpose by using suitable buckling curves as recommended in this paper.

Distortional buckling behaviour of fire exposed cold-formed steel columns

Cold-formed steel sections are commonly used in low-rise commercial and residential buildings. During fire events, cold-formed steel structural elements in these buildings can be exposed to elevated temperatures. Hence after such events there is a need to evaluate their residual strengths. However, only limited information is available in relation to the residual strength of fire exposed cold-formed steel sections. This research is aimed at investigating the distortional buckling capacities of fire exposed cold-formed lipped channel sections. A series of compression tests of fire exposed, short lipped channel columns made of varying steel grades and thicknesses was undertaken in this research. Test columns were first exposed to different elevated temperatures up to 800 oC, and then tested to failure after cooling down. Suitable finite element models were developed with post-fire mechanical properties to simulate the behaviour of tested columns and were validated using test results. The residual compression capacities of short columns were also predicted using the current cold-formed steel standards and compared with test and finite element analysis results. This comparison showed that ambient temperature design rules for columns can be used to predict the residual compression capacities of fire exposed short or laterally restrained cold-formed steel columns provided the maximum temperature experienced by the column can be estimated after a fire event. Such residual capacity assessments will allow engineers to evaluate the safety of fire exposed buildings. This paper presents the details of this experimental study, finite element analyses and the results.

Experimental studies on web crippling behaviour of hollow flange channel beams under two flange load cases

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel beam (LSB) subject to web crippling under End Two Flange (ETF) and Interior Two Flange (ITF) load cases. The LSB sections with two rectangular hollow flanges are made using a simultaneous cold-forming and electric resistance welding process. Due to the geometry of the LSB, and its unique residual stress characteristics and initial geometric imperfections, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending, predominant shear and combined actions. To date, however, no investigation has been conducted on the web crippling behaviour and strength of LSB sections. Hence an experimental study was conducted to investigate the web crippling behaviour and capacities of LSBs. Twenty-eight web crippling tests were conducted under ETF and ITF load cases, and the ultimate web crippling capacities were compared with the predictions from the design equations in AS/NZS 4600 and AISI S100. This comparison showed that AS/NZS 4600 and AISI S100 web crippling design equations are unconservative for LSB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs based on experimental results. Suitable design rules were also developed under the direct strength method (DSM) format.

100 futures now : designing sustainable futures

This presentation tells the story of an initiative in middle schooling at Kelvin Grove State College that begins in the Art studios, but reaches out to other disciplines and approaches, and to community and industry partners. It is inspired by the potential of 'future thinking' to become a compelling focus in contemporary art and design. Ethically it espouses a simple premise": every student in our classrooms now has a stake in creating livable, democratic and creative futures. Every student has the potential to be an active force in making that future. "100 Futures Now" is a project that envisages creative and imaginative students working in collaboration with artists and designers to visualize amazing futures and communicate their vision through art and design. "100 Futures Now" is one in a series of innovative curriculum initiatives at Kelvin Grove State College designed to build sustainable practice in arts education with the support of partners in industry and universities and with resident artists and designers. The model blends elements of art and design methodology to focus on the critical and creative thinking skills prioritised in ACARA and 21st century curriculum. The organisers are developing a sustainable model for working with resident artists that goes beyond a single arts intervention or extension/enrichment experience. In this model artists and designers are collaborators in the design of learning experiences that support future programs. This model also looks to transfer the benefits of residencies to the wider school community (in this case to middle schooling curriculum) and to teachers in other curriculum areas, and not exclusively to the immediate target group. In "100 Futures Now", story-making is the engine that powers the creative process. For this reason the program uses a series of imaginative scenarios, including those of speculative fiction and science, as departure points for inquiry, and applies the methodologies of arts and design practice to explore and express student story telling and story making. The story-making responses of student teams will naturally be expressed multimodally through visual art, design artifacts, installation, performance and digital works. The project’s focus on narratives and its modes of communication (performance/installation) are inspired by the work of experimental contemporary design practices and the speculative scenarios of U.K. based designers Anthony Dunne and Fiona Raby. Thanks to the support of an Arts Queensland Artist-in -Residence grant in 2014, resident artists and designers who work with a diversity of ideas and approaches ranging over science, bio-ethics, biodiversity, behavior and ethics, ambient sound, urbanism, food, and wearable design, will work with middle school students as catalysts for deeper thinking and creative action. All these rich fields for future speculation will become triggers for team inquiry into the deeper connections between the past, the present, and future challenges such as climate, waste, energy, sustainability and resilience. These imagined futures will form the platform for a critical, sustainability/design futures approach that will involve questioning assumptions and empowering students as agents rather than consumers of change.

Deviant consumer behaviour : a qualitative exploration

Deviant behaviour is an ongoing problem in the consumer marketplace (Daunt and Harris, 2012). To investigate this issue, a number of authors have focused on empirically assessing consumer perceptions of right and wrong behaviours, such as the Muncy-Vitell (1992) consumer ethics scale. While studies like this have provided extensive empirical insights, qualitative insight into why consumers make these behaviour classifications remains underexplored. The aim of this paper is to extend on that literature by exploring the reasoning behind behavioural classifications. Using interviews, seven factors were identified in consumer definitions of acceptable, questionable, and unacceptable consumer behaviours including; official classification, prevalence, ease of justification, perceived fairness, consequences, risk, and values. These results also provide actionable insights for marketers in that multi-level deterrence strategies must be employed to more effectively deter consumer deviance, as opposed to traditional deterrence strategies based on cost-benefit analyses.

Behaviour v structure : Tribunal’s AGL Energy merger authorisation

Section 95AT of the Competition and Consumer Act 2010 (Cth) (CCA) provides that the Tribunal may grant an authorisation to acquire shares or assets that would otherwise contravene s 50. Section 95AT was inserted by the Trade Practices Legislation Amendment Act 2006 (Cth) and commenced on 1 January 2007. In Application for Authorisation of Macquarie Generation by AGL Energy Limited, (AGL Energy) the Tribunal has for the first time granted AGL Energy Limited (AGL) a conditional authorisation to acquire the assets of Macquarie Generation from the NSW Government.

Technicolouring the fridge : reducing food waste through uses of colour-coding and cameras

Domestic food wastage is a growing problem for the environment and food security. Some causes of domestic food wastes are attributed to a consumer’s behaviours during food purchasing, storage and consumption, such as: excessive food purchases and stockpiling in storage. Recent efforts in human-computer interaction research have examined ways of influencing consumer behaviour. The outcomes have led to a number of interventions that assist users with performing everyday tasks. The Internet Fridge is an example of such an intervention. However, new pioneering technologies frequently confront barriers that restrict their future impact in the market place, which has prompted investigations into the effectiveness of behaviour changing interventions used to encourage more sustainable practices. In this paper, we investigate and compare the effectiveness of two interventions that encourage behaviour change: FridgeCam and the Colour Code Project. We use FridgeCam to examine how improving a consumer’s food supply knowledge can reduce food stockpiling. We use the Colour Code Project to examine how improving consumer awareness of food location can encourage consumption of forgotten foods. We explore opportunities to integrate these interventions into commercially available technologies, such as the Internet Fridge, to: (i) increase the technology’s benefit and value to users, and (ii) promote reduced domestic food wastage. We conclude that interventions improving consumer food supply and location knowledge can promote behaviours that reduce domestic food waste over a longer term. The implications of this research present new opportunities for existing and future technologies to play a key role in reducing domestic food waste.

Using the Driver Behaviour Questionnaire to predict crashes and demerit point loss : does it get better with larger sample sizes?

The Driver Behaviour Questionnaire (DBQ) continues to be the most widely utilised self-report scale globally to assess crash risk and aberrant driving behaviours among motorists. However, the scale also attracts criticism regarding its perceived limited ability to accurately identify those most at risk of crash involvement. This study reports on the utilisation of the DBQ to examine the self-reported driving behaviours (and crash outcomes) of drivers in three separate Australian fleet samples (N = 443, N = 3414, & N = 4792), and whether combining the samples increases the tool’s predictive ability. Either on-line or paper versions of the questionnaire were completed by fleet employees in three organisations. Factor analytic techniques identified either three or four factor solutions (in each of the separate studies) and the combined sample produced expected factors of: (a) errors, (b) highway-code violations and (c) aggressive driving violations. Highway code violations (and mean scores) were comparable across the studies. However, across the three samples, multivariate analyses revealed that exposure to the road was the best predictor of crash involvement at work, rather than DBQ constructs. Furthermore, combining the scores to produce a sample of 8649 drivers did not improve the predictive ability of the tool for identifying crashes (e.g., 0.4% correctly identified) or for demerit point loss (0.3%). The paper outlines the major findings of this comparative sample study in regards to utilising self-report measurement tools to identify “at risk” drivers as well as the application of such data to future research endeavours.

Effectiveness of a puppet show on iodine knowledge, attitudes and behaviour of elementary students and the indirect effects on their parents and households in Ho Chi Minh City : a pilot study

Deficiencies in iodine levels have been shown to seriously affect a child’s intellectual development and learning capacity.1 In South-East Asia, iodine deficiency remains a major public health concern. Approximately 30% of the region’s population of 503.6 million have insufficient iodine intake, and only 61% of households have access to iodized salt.1 For this reason, it is necessary to initiate effective, community-based health promotion activities that are targeted toward populations of various ages. A puppet show is one imaginative and entertaining method of health education that has been advocated for use in communicating positive health behaviours to children.2e5 The authors undertook a literature review and found no studies assessing the effectiveness of a puppet show to teach an iodine education programme...