Alfabetização de jovens e adultos no estado do Rio de Janeiro, Brasil: o significado de um desafio para a inclusão social

Tese de Doutoramento em Ciências da Educação

Oxygen mass transfer impact on citric acid production by Yarrowia lipolytica from crude glycerol

Production of citric acid from crude glycerol from biodiesel industry, in batch cultures of Yarrowia lipolytica W29 was performed in a lab-scale stirred tank bioreactor in order to assess the effect of oxygen mass transfer rate in this bioprocess. An empirical correlation was proposed to describe oxygen volumetric mass transfer coefficient (kLa) as a function of operating conditions (stirring speed and specific air flow rate) and cellular density. kLa increased according with a power function with specific power input and superficial gas velocity, and slightly decreased with cellular density. The increase of initial kLa from 7 h-1 to 55 h-1 led to 7.8-fold increase of citric acid final concentration. Experiments were also performed at controlled dissolved oxygen (DO) and citric acid concentration increased with DO up to 60% of saturation. Thus, due to the simpler operation setting an optimal kLa than at controlled DO, it can be concluded that kLa is an adequate parameter for the optimization of citric acid production from crude glycerol by Y. lipolytica and to be considered in bioprocess scale-up. Our empirical correlation, considering the operating conditions and cellular density, will be a valid tool for this purpose.

Migrações recentes de portugueses para Angola: contextos e estratégias

Dissertação de mestrado em Sociologia das Organizações e Trabalho

Characterization of an in vitro fed-batch model to obtain cells released from S. epidermidis biofilms

Both dynamic and fed-batch systems have been used for the study of biofilms. Dynamic systems, whose hallmark is the presence of continuous flow, have been considered the most appropriate for the study of the last stage of the biofilm lifecycle: biofilm disassembly. However, fed-batch is still the most used system in the biofilm research field. Hence, we have used a fed-batch system to collect cells released from Staphylococcus epidermidis biofilms, one of the most important etiological agents of medical device-associated biofilm infections. Herein, we showed that using this model it was possible to collect cells released from biofilms formed by 12 different S. epidermidis clinical and commensal isolates. In addition, our data indicated that biofilm disassembly occurred by both passive and active mechanisms, although the last occurred to a lesser extent. Moreover, it was observed that S. epidermidis biofilm-released cells presented higher tolerance to vancomycin and tetracycline, as well as a particular gene expression phenotype when compared with either biofilm or planktonic cells. Using this model, biofilm-released cells phenotype and their interaction with the host immune system could be studied in more detail, which could help providing significant insights into the pathophysiology of biofilm-related infections.

Correction of the initial conditions

"Series title: Springerbriefs in applied sciences and technology, ISSN 2191-530X"

The effect of hydrodynamic conditions in Corynebacterium glutamicum growth

[Excerpt] Corynebacterium glutamicum is a facultative anaerobic, gram-positive bacterium with a GRAS status that grows fast and achieves high cell densities. C. glutamicum is commonly used in amino acids production, and is also able to convert sugars in organic acids (OA) and alcohols in specific conditions: anaerobic and limited-oxygen environments. In these conditions, the carbon metabolism is modified, namely the flux shifts from the pentose phosphate pathway to glycolysis and the TCA cycle flux decreases and consequently bacterial growth is strongly affected [1,2]. (...)

Continuous-flow precipitation as a route to prepare highly controlled nanohydroxyapatite

[Excerpt] Hydroxyapatite Ca10(PO4)6(OH)2 (HAp) has been widely used for biomedical purposes because of its exceptional biocompatibility, bioactivity and osteoconductivity [1]. As these properties are directly related to HAp particles characteristics (size, morphology and purity), a very good control of the reaction conditions is required to obtain particles with the desired properties. Usually, HAp is synthesized by wet chemical precipitation in stirred tank batch reactors that often lead to inconsistencies in product specifications due to their low mixing efficiency [2]. (...)

The results of the Campaign for evaluating sphygmomanometers accuracy and their physical conditions

OBJECTIVE: To evaluate the sphygmomanometers calibration accuracy and the physical conditions of the cuff-bladder, bulb, pump, and valve. METHODS: Sixty hundred and forty five aneroid sphygmomanometers were evaluated, 521 used in private practice and 124 used in hospitals. Aneroid manometers were tested against a properly calibrated mercury manometer and were considered calibrated when the error was <=3mm Hg. The physical conditions of the cuffs-bladder, bulb, pump, and valve were also evaluated. RESULTS: Of the aneroid sphygmomanometers tested, 51% of those used in private practice and 56% of those used in hospitals were found to be not accurately calibrated. Of these, the magnitude of inaccuracy ranged from 4 to 8mm Hg in 70% and 51% of the devices, respectively. The problems found in the cuffs - bladders, bulbs, pumps, and valves of the private practice and hospital devices were bladder damage (34% vs. 21%, respectively), holes/leaks in the bulbs (22% vs. 4%, respectively), and rubber aging (15% vs. 12%, respectively). Of the devices tested, 72% revealed at least one problem interfering with blood pressure measurement accuracy. CONCLUSION: Most of the manometers evaluated, whether used in private practice or in hospitals, were found to be inaccurate and unreliable, and their use may jeopardize the diagnosis and treatment of arterial hypertension.

Vermiculite bio-barriers for Cu and Zn remediation: an eco-friendly approach for freshwater and sediments protection

The increase in heavy metal contamination in freshwater systems causes serious environmental problems in most industrialized countries, and the effort to find ecofriendly techniques for reducing water and sediment contamination is fundamental for environmental protection. Permeable barriers made of natural clays can be used as low-cost and eco-friendly materials for adsorbing heavy metals from water solution and thus reducing the sediment contamination. This study discusses the application of permeable barriers made of vermiculite clay for heavy metals remediation at the interface between water and sediments and investigates the possibility to increase their efficiency by loading the vermiculite surface with a microbial biofilm of Pseudomonas putida, which is well known to be a heavy metal accumulator. Some batch assays were performed to verify the uptake capacity of two systems and their adsorption kinetics, and the results indicated that the vermiculite bio-barrier system had a higher removal capacity than the vermiculite barrier (?34.4 and 22.8 % for Cu and Zn, respectively). Moreover, the presence of P. putida biofilm strongly contributed to fasten the kinetics of metals adsorption onto vermiculite sheets. In open-system conditions, the presence of a vermiculite barrier at the interface between water and sediment could reduce the sediment contamination up to 20 and 23 % for Cu and Zn, respectively, highlighting the efficiency of these eco-friendly materials for environmental applications. Nevertheless, the contribution of microbial biofilm in open-system setup should be optimized, and some important considerations about biofilm attachment in a continuous-flow system have been discussed.

Influence of oxygen conditions on bacterial interactions within biofilms related with cystic fibrosis

Dissertação de mestrado em Bioengineering

Evaluation of antimicrobial strategies against biomaterial-associated infections: impact of the surrounding environmental conditions

Dissertação de mestrado em Bioengenharia

Quantificação da massa infartada do ventrículo esquerdo pela ressonância magnética cardíaca: comparação entre a planimetria e o método de escore visual semi-quantitativo

OBJETIVO: Validar um novo método de escore visual semi-quantitativo contra a planimetria digital quantitativa para a determinação da massa infartada do ventrículo esquerdo pela ressonância magnética cardíaca com técnica de realce tardio. MÉTODO: Estudados 77 pacientes com infarto miocárdico prévio em aparelho de ressonância magnética de 1,5T utilizando técnica de realce tardio para avaliação da viabilidade miocárdica e cálculo da massa infartada. Para avaliação da função ventricular esquerda pelo método de Simpson utilizamos técnica de cine-ressonância. O cálculo da massa infartada foi realizado nas imagens de realce tardio de duas formas: planimetria e método de escore. Utilizamos métodos de regressão linear simples, correlação e concordância entre métodos e observadores segundo a análise de Bland-Altman. RESULTADOS: Em todos os 77 pacientes as áreas de infarto foram detectadas pela ressonância magnética cardíaca utilizando a técnica de realce tardio. O tamanho do infarto medido pela planimetria foi semelhante ao obtido pelo método de escore, com a média das diferenças entres as medidas de apenas 1,03% da massa do ventrículo esquerdo. As variabilidades inter (0,41%) e intra-observador (0,34%) evidenciaram excelente reprodutibilidade do método de escore. A massa infartada apresentou boa correlação com a fração de ejeção e volumes distólico e sistólico finais indexados, r=-0,76, r=0,63 e r=0,67, respectivamente. CONCLUSÃO: A avaliação de pacientes com infarto agudo do miocárdio prévio pela ressonância magnética cardíaca, utilizando a técnica de realce tardio, permite a determinação reprodutível do tamanho do infarto, tanto pelo método de planimetria, quanto pelo modelo semi-quantitativo de escore.

Mecanismos de Fotopercepción No-Visual y Control Circadiano en la Retina Interna de Vertebrados en Condiciones Fisiológicas y en un Modelo Animal de Ceguera. Mechanisms of Non-visual Perception and Circadian Control in the Vertebrate Inner Retina under Physiological Conditions and in Animal Model of Blindness.

La retina juega un rol esencial en el funcionamiento del sistema circadiano de los vertebrados al ser la encargada de sensar las condiciones de iluminación ambiental que ajustan el reloj interno con el fotoperíodo exterior a través de un circuito no-visual. Este circuito es independiente de la vía de formación de imágenes e involucra a las células ganglionares retinianas (CGRs) que proyectan a varias estructuras no-visuales del cerebro; esta vía es la encargada de regular el reflejo pupilar, la sincronización de los ritmos diarios de actividad, el sueño y la supresión de melatonina pineal. La retina contiene además un reloj autónomo que genera ritmos diarios autosostenidos en distintas funciones bioquímicas y fisiológicas, que le confiere la capacidad de predecir el tiempo y anticiparse en su fisiología a los cambios lumínicos a lo largo del ciclo día-noche. Este laboratorio ha demostrado por 1ra vez que las CGRs de pollo poseen osciladores endógenos que generan variaciones diarias en la biosíntesis de fosfolípidos (Guido et al, J Neurochem. 2001; Garbarino et al., J Neurosci Res. 2004a) y de la hormona melatonina con niveles máximos durante el día (Garbarino et al., J Biol Chem 2004b). Aún más, cultivos primarios de CGRs responden a la luz a través de una cascada bioquímica de fototransducción similar a la de invertebrados y que involucra la activación de la enzima fosfolipasa C (PLC) (Contin et al., FASEB J 2006). Estos cultivos fueron obtenidos a estadios embrionarios muy tempranos en dónde solo las CGRs son postmitóticas y mayoritariamente maduras. A estos estadios, los cultivos expresan marcadores de especificación de células ganglionares (pax6, brn3), la proteina Gq y los fotopigmentos melanopsina y criptocromos con gran homología con marcadores descriptos para fotorreceptores rabdoméricos de invertebrados (Contin et al, 2006). Recientemente comenzamos a investigar la percepción de luz en pollos GUCY1*, un modelo de ceguera, en animales que carecen de células fotorreceptoras-conos y bastones-funcionales. Resultados preliminares indicarían que la retina interna, y potencialmente las CGRs de estos animales conservarían la capacidad de responder a la luz regulando el reflejo pupilar y sincronizando los ritmos diarios de alimentación. La convergencia de osciladores y fotopigmentos en la población de CGRs podría contribuir al control temporal de la fisiología del organismo y regulación de funciones no-visuales. Son objetivos de este proyecto: a) Investigar el rol de las CGRs en el sistema circadiano estudiando: i- su habilidad para sintetizar melatonina y, su regulación por luz y dopamina; ii- su capacidad fotorreceptora intrínseca, investigando la presencia de fotopigmentos y componentes de la cascada de fototransducción fundamentalmente la vía de los fosfoinosítidos y la activación de PLC, mediante ensayos moleculares, bioquímicos y farmacológicos; b) Extender estos estudios a cultivos primarios de CGRs inmunopurificadas midiendo la respuesta a la luz sobre la síntesis de melatonina, y los niveles de los mensajeros 2rios Ca2+ y AMP cíclico, la inducción de genes tempranos y la regulación de la actividad NAT, enzima clave en la síntesis de melatonina; y c) Investigar la percepción de luz en pollos GUCY1*(ciegos), sobre distintas funciones no-visuales tales como el reflejo pupilar, la sincronización de los ritmos diarios de alimentación, la síntesis de melatonina y la expresión génica en animales expuestos a estimulación lumínica de distintas intensidades y longitudes de onda. Estos estudios permitirán construir el espectro de acción de la respuesta a la luz en los pollos ciegos a fin de identificar el/los fotopigmentos intervinientes en este fenómeno. Este proyecto profundizará el conocimiento sobre la capacidad fotorreceptora-no visual de la retina interna y particularmente de las CGRs, de la naturaleza de la cascada bioquímica que opera en las mismas y de los mecanismos de regeneración del cromóforo utilizado.