Insects on decomposing carcasses of small rodents in a secondary forest in Southeastern Brazil

The decomposition of small carcasses in the open is frequently neglected although it may provide information of forensic importance. This paper describes an experimental study of arthropod species associated with carcasses of mouse, Mus musculus (Linnaeus, 1758) and rat, Rattus norvegicus (Berkenhout, 1769) (Rodentia: Muridae). Four carcasses were left inside iron cages in sunlit and shady areas in a secondary forest in Southeastern Brazil twice a season for four seasons (n = 16 carcasses of each rodent). The carcasses were removed when arthropods ceased to visit them. The visiting and colonizing invertebrates were collected daily and identified. Immatures were also collected and reared in a laboratory for identification. We collected 6,514 arthropods (820 adults and 5,694 juvenile forms) belonging to 53 species from the families Sarcophagidae, Calliphoridae, Muscidae, Fanniidae, Syrphidae, Richardiidae, Sepsidae, Micropezidae, Otitidae, Drosophilidae, Phoridae, Dolichopodidae, Anthomyiidae, Asilidae and Lauxaniidae (Diptera), Formicidae, Ichneumonidae, Encyrtidae and Apidae (Hymenoptera), Staphylinidae (Coleoptera) and Gonyleptidae (Opiliones). Lucilia eximia (Wiedemann, 1819) (Diptera: Calliphoridae) and Peckia (Pattonella) intermutans (Walker, 1861) (Diptera: Sarcophagidae) deserve special attention because both adult and immature forms were collected in all seasons and in both areas. Our results indicate that the frequency of occurrence of these arthropods was positively associated with carcass size (mouse or rat); no marked insect succession on the carcasses occurred; and the diversity of Calliphoridae and Sarcophagidae was high, irrespective of season.

Allometry of the secondary sexual characters of the shore crab Pachygrapsus transversus (Gibbes, 1850) (Brachyura, Grapsidae)

The allometric growth of secondary sexual characters in Pachygrapsus transversus is investigated from the 2(nd) crab stage onward. Clear sexual dimorphism is restricted to abdominal morphology, but ANCOVA analyses showed that chelae become larger in males and the carapace becomes wider in females. Size at the puberty moult in both sexes was estimated using Somerton's computer techniques. Mature II analyses applied to bi-log gonopod length vs, carapace length relationships indicated a puberty moult at 5.0 mm in males.In females, Mature I analyses detected the overlapping growth phase lines in bi-log carapace length vs. abdomen width scatterplots. Fitting the logistic equation provided an estimate of 50% maturity at 5.5 mm. The regression lines separate young and resting individuals from the potentially reproductive females, but they do not separate young from adult crabs. Year-round monthly samples showed that the proportion of small adult-like females is higher during the breeding season. After breeding, females may moult to a young-like morphotype, as observed in controlled laboratory conditions. Moulting to a resting condition splits smaller mature females into different growth phase lines. Therefore, estimates of female size at sexual maturity by means of abdomen allometric growth analyses are inadequate in this species.

Rotifer abundance, biomass, and secondary production after the recovery of hydrologic connectivity between a river and two marginal lakes (São Paulo, Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigating the effect of different positioning of lysine residues along the peptide chain of mastoparans for their secondary structures and biological activities

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluating methods for the isolation of marine-derived fungal strains and production of bioactive secondary metabolites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Crab-eating Fox (Cerdocyon thous) as a secondary seed disperser of Eugenia umbelliflora (Myrtaceae) in a Restinga forest of southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microbiological or Chemical Models of Enamel Secondary Caries Compared by Polarized-Light Microscopy and Energy Dispersive X-ray Spectroscopy

Different secondary caries models may present different results. The purpose of this study was to compare different in vitro secondary caries models, evaluating the obtained results by polarized-light microscopy (PLM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Standardized human enamel specimens (n = 12) restored with different materials (Z250 conventional composite resin-CRZ, Freedom polyacid-modified composite resin-CRF, Vitremer resin-modified glass-ionomer-GIV, and Fuji IX conventional glass-ionomer cement-GIF) were submitted to microbiological (MM) or chemical caries models (CM). The control group was not submitted to any caries model. For MM, specimens were immersed firstly in sucrose broth inoculated with Streptococcus mutans ATCC 35688, incubated at 37 degrees C/5% CO(2) for 14 days and then in remineralizing solution for 14 days. For CM, specimens were submitted to chemical pH-cycling. Specimens were ground, submitted to PLM and then were dehydrated, gold-sputtered and submitted to SEM and EDS. Results were statistically analyzed by Kruskall-Wallis and Student-Newman-Keuls tests (alpha = 0.05). No differences between in vitro caries models were found. Morphological differences in enamel demineralization were found between composite resin and polyacid-modified composite resin (CRZ and CRF) and between the resin-modified glass-ionomer and the glass-ionomer cement (GIF and GIV). GIF showed higher calcium concentration and less demineralization, differing from the other materials. In conclusion, the glass-ionomer cement showed less caries formation under both in vitro caries models evaluated. (C) 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 90B: 635-640, 2009

Ability of different restorative materials to prevent in situ secondary caries: analysis by polarized light-microscopy and energy-dispersive X-ray

Secondary caries is the main cause of direct restoration replacement. The purpose of this study was to analyze enamel adjacent to different restorative materials after in situ cariogenic challenge using polarized-light microscopy (PLM), scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDS). Twelve volunteers, with a low level of dental plaque, a low level of mutans streptococci, and normal salivary flow, wore removable palatal acrylic appliances containing enamel specimens restored with Z250 composite, Freedom composite, Fuji IX glass-ionomer cement, or Vitremer resin-modified glass-ionomer for 14 days. Volunteers dripped one drop of 20% sucrose solution (n = 10) or distilled water (control group) onto each specimen 8 times per day. Specimens were removed from the appliances and submitted to PLM for examination of the lesion area (in mm(2)), followed by dehydration, gold-sputtering, and submission to SEM and EDS. The calcium (Ca) and phosphorus (P) contents were evaluated in weight per cent (%wt). Differences were found between Z250 and Vitremer, and between Z250 and FujiIX, when analyzed using PLM. Energy-dispersive X-ray analysis results showed differences between the studied materials regarding Ca %wt. In conclusion, enamel adjacent to glass-ionomer cement presented a higher Ca %wt, but this material did not completely prevent enamel secondary caries under in situ cariogenic challenge.

Hadronic form factors and the J/psi secondary production cross section: An update

Improving previous calculations, we compute the D + (D) over bar J/psi + pi cross section using the most complete effective Lagrangians available. The new crucial ingredients are the form factors on the charm meson vertices, which are determined from QCD sum rules calculations. Some of them became available only very recently, and the last one, needed for our present purpose, is calculated in this work.

Measurement of the t(t)over-bar production cross section in p(p)over-bar collisions at root s=1.96 TeV using secondary vertex b tagging

We report a new measurement of the t (t) over bar production cross section in p (beta) over bar collisions at a center-of-mass energy of 1.96 TeV using events with one charged lepton (electron or muon), missing transverse energy, and jets. Using 425 pb(-1) of data collected using the D0 detector at the Fermilab Tevatron Collider, and enhancing the t (t) over bar content of the sample by tagging b jets with a secondary vertex tagging algorithm, the t (t) over bar production cross section is measured to be sigma(p (t) over bar -> t (t) over bar +X)=6.6 +/- 0.9(stat+syst) +/- 0.4(lum) pb. This cross section is the most precise D0 measurement to date for t (t) over bar production and is in good agreement with standard model expectations.

Measurement of B(B)over-bar angular correlations based on secondary vertex reconstruction at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analytical study of the nonlinear behavior of a shape memory oscillator: Part II-resonance secondary

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of N-Terminus Modifications on the Biological Activity, Membrane Interaction, and Secondary Structure of the Antimicrobial Peptide Hylin-a1

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn for foliar diagnosis using high-resolution continuum source flame atomic absorption spectrometry: Feasibility of secondary lines, side pixel registration and least-squares background correction

The fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn in plant tissues by high-resolution continuum source flame atomic absorption spectrometry is proposed. For this, the main lines for Cu (324.754 nm), Fe (248.327 nm), Mn (279.482 nm) and Zn (213.857 nm) were selected, and the secondary lines for Ca (239.856 nm), Mg (202.582 nm) and K (404.414 nm) were evaluated. The side pixel registration approach was studied to reduce sensitivity and extend the linear working range for Mg by measuring at wings (202.576 nm; 202.577 nm; 202.578 nm; 202.580 nm: 202.585 nm; 202.586 nm: 202.587 nm; 202.588 nm) of the secondary line. The interference caused by NO bands on Zn at 213.857 nm was removed using the least-squares background correction. Using the main lines for Cu, Fe, Mn and Zn, secondary lines for Ca and K, and line wing at 202.588 nm for Mg, and 5 mL min(-1) sample flow-rate, calibration curves in the 0.1-0.5 mg L-1 Cu, 0.5-4.0 mg L-1 Fe, 0.5-4.0 mg L-1 Mn, 0.2-1.0 mg L-1 Zn, 10.0-100.0 mg L-1 Ca, 5.0-40.0 mg L-1 Mg and 50.0-250.0 mg L-1 K ranges were consistently obtained. Accuracy and precision were evaluated after analysis of five plant standard reference materials. Results were in agreement at a 95% confidence level (paired t-test) with certified values. The proposed method was applied to digests of sugar-cane leaves and results were close to those obtained by line-source flame atomic absorption spectrometry. Recoveries of Ca, Mg, K, Cu, Fe, Mn and Zn in the 89-103%, 84-107%, 87-103%, 85-105%, 92-106%, 91-114%, 96-114% intervals, respectively, were obtained. The limits of detection were 0.6 mg L-1 Ca, 0.4 mg L-1 Mg, 0.4 mg L-1 K, 7.7 mu g L-1 Cu, 7.7 mu g L-1 Fe, 1.5 mu g L-1 Mn and 5.9 mu g L-1 Zn. (C) 2009 Elsevier B.V. All rights reserved.

Electrochemical genosensors for the detection of Bonamia parasite. Selection of single strand-DNA (ssDNA) probes by simulation of the secondary structure folding

A post-PCR nucleic acid work by comparing experimental data, from electrochemical genosensors, and bioinformatics data, derived from the simulation of the secondary structure folding and prediction of hybridisation reaction, was carried out in order to rationalize the selection of ssDNA probes for the detection of two Bonamia species, B. exitiosa and B. ostreae, parasites of Ostrea edulis.Six ssDNA probes (from 11 to 25 bases in length, 2 thiolated and 4 biotinylated) were selected within different regions of B. ostreae and B. exitiosa PCR amplicons (300 and 304 bases, respectively) with the aim to discriminate between these parasite species. ssDNA amplicons and probes were analyzed separately using the "Mfold Web Server" simulating the secondary structure folding behaviour. The hybridisation of amplicon-probe was predicted by means of "Dinamelt Web Server". The results were evaluated considering the number of hydrogen bonds broken and formed in the simulated folding and hybridisation process, variance in gaps for each sequence and number of available bases. In the experimental part, thermally denatured PCR products were captured at the sensor interface via sandwich hybridisation with surface-tethered probes (thiolated probes) and biotinylated signalling probes. A convergence between analytical signals and simulated results was observed, indicating the possibility to use bioinformatic data for ssDNA probes selection to be incorporated in genosensors. (C) 2011 Elsevier B.V. All rights reserved.