Outbreak of neonatal infection by an endemic clone of Serratia marcescens

INTRODUCTION: The outbreak occurred between February and June 2006 and included identification of the cases, analysis of medical records, cultures from environmental sources, resistance analyses and genotyping profile of Serratia marcescens. METHODS: The cultures were composed of 13 blood isolates, 17 rectal and hand swabs and air sampling. RESULTS: The data obtained by pulsed-field gel electrophoresis exhibited three strains that contaminated 24 patients. Systemic infection was the most common in neonates with lower weight, long periods of hospitalization, premature delivery and the use of mechanical ventilation. CONCLUSIONS: This investigation revealed the multifactorial nature of the outbreak. An endemic clone of S. marcescens was detected.

Eco-efficient earthen plasters: The influence of the addition of natural fibers.

Clayish earth-based mortars are been recognized, all over the world, as eco-efficient products for plastering. Apart from being a product with low embodied energy when compared to other types of plasters, their application on the interior surface of walls may give a strong contribution for the health and comfort of inhabitants. As part of an ongoing research regarding earth-based plasters this work assesses the influence of the addition of two types of natural fibres – oat straw and typha fiber-wool – on the characteristics of plastering mortars made with a clayish earth. Mechanical and physical characteristics were tested, showing that addition of these fibers contribute to decrease linear drying shrinkage and thermal conductivity, as well as promoting the adhesion strength of plaster to the substrate. The improvement of mechanical resistance reveal to be dependent on the type of fiber added while the hygroscopic capacity of the plaster is maintained regardless of the fiber additions.

Implementation of a zebrafish health program in a research facility : A 4-year retrospective study

In the past two decades, zebrafish (Danio rerio)-based research has contributed to significant scientific advances. Still, husbandry and health programs did not evolve at the same pace, as evidenced by the absence of general guidelines. Health monitoring is essential to animal welfare, to permit animal exchanges across facilities, to contribute to robust experimental results, and for data reproducibility. In this study, we report a health program implemented in a zebrafish research facility to prevent, monitor, and control pathogen, and disease dissemination. This program includes quarantine, routine health screening of sentinels, and nonroutine screenings of retired animals and sick/moribund individuals. An extensive list of clinical signs, lesions, and pathogens was monitored based on: daily observation of fish, necropsy, histology, and bacterial culture. The results indicate that the combined analysis of sentinels with the evaluation of sick/moribund animals enables a comprehensive description not only of pathogen prevalence but also of clinical and histopathologic lesions of resident animals. The establishment of a quarantine program revealed to be effective in the reduction of Pseudoloma neurophilia frequency in the main aquaria room. Finally, characterization of the colony health status based on this multiapproach program shows a low prevalence of lesions and pathogens in the facility.

Theranostic applications of phage display to control leishmaniasis: selection of biomarkers for serodiagnostics, vaccination, and immunotherapy

AbstractPhage display is a high-throughput subtractive proteomic technology used for the generation and screening of large peptide and antibody libraries. It is based on the selection of phage-fused surface-exposed peptides that recognize specific ligands and demonstrate desired functionality for diagnostic and therapeutic purposes. Phage display has provided unmatched tools for controlling viral, bacterial, fungal, and parasitic infections, and allowed identification of new therapeutic targets to treat cancer, metabolic diseases, and other chronic conditions. This review presents recent advancements in serodiagnostics and prevention of leishmaniasis -an important tropical parasitic disease- achieved using phage display for the identification of novel antigens with improved sensitivity and specificity. Our focus is on theranostics of visceral leishmaniasis with the aim to develop biomarker candidates exhibiting both diagnostic and therapeutic potential to fight this important, yet neglected, tropical disease.

Phenotypic and molecular characterization of CTX-M extended-spectrum beta-lactamase-producing Escherichia coli isolates in Shiraz, Iran

AbstractINTRODUCTIONThe aim of this study was to detect the prevalence of the extended-spectrum beta-lactamase (ESBL)-encoding CTX-M gene in Escherichia coliisolates.METHODS:Phenotypic screening of 376 E. coli isolates for ESBL was conducted using disk diffusion. ESBL-producing isolates were tested using PCR and specific primers. The blaCTX-M cluster was identified using the RFLP method, and its genotype was sequenced.RESULTS:From 202 ESBL-producing E. coli , 185 (91.5%) possessed CTX-M genes. CTX-M-1 subtypes were found in 98% of the isolates. The blaCTX-M gene was identical to CTX-M-15.CONCLUSIONS:A high prevalence of CTX-M-1-producing E. coli apparently exists in Shiraz, Iran.

Factors associated with seropositivity for APGL-Iamong household contacts of leprosy patients

Abstract: INTRODUCTION: Leprosy is mainly transmitted among family members who share genetic and ambient factors. The clinical form of leprosy in the index case and kinship could be risk factors for leprosy transmission. High antibody levels in household contacts (HC) in the absence of neural or skin lesions may characterize latent infection. This study aimed to evaluate the association between seropositivity for anti-phenolic glycolipid-I immunoglobulin M antibodies (APGL-I) in HC and the clinical classification of the index case and to analyze the association between APGL-I positivity with other factors such as age, kinship, and gender. METHODS: We performed a survey among 320 HC of 120 leprosy patients who were evaluated and followed-up in a leprosy outpatient clinic of a university hospital. All HC underwent complete skin examination, peripheral nerve palpation, skin sensory tests, and serologic tests for the detection and quantification of APGL-I. RESULTS: The overall seropositivity rate was 20%, and was greatly affected by kinship. APGL-I seropositivity was higher in siblings (41%), followed by parents (28%), spouses (26%), other (19%), and offspring (14%). Independent risk factors for seropositivity were being siblings (OR 3.3) and being a HC of an index case with indeterminate leprosy (OR 5.3). APGL-I seropositivity was associated with index cases with a bacillary index of 4 (88%; p<.001). Seropositivity among HC was not significantly associated with their gender and age. There was no statistical difference in the seropositivity rates of HC of index patients with paucibacillary and multibacillary leprosy. CONCLUSIONS: Strict evaluation and follow-up of HC with positive results for APGL-I is recommended. Special attention should be paid during the screening of siblings of the index cases, HC of patients with a high bacillary index, and HC of patients with indeterminate leprosy.

Production and characterization of Chitin-Glucan Complex by Komagataella pastoris

This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)

Use of corticosteroids and the outcome of infants with bronchopulmonary dysplasia

Ventilator-dependent premature infants are often treated with dexamethasone. Several trials showed that steroids while improve pulmonary compliance and facilitate extubation, some treated infants may have adverse effects, such as alterations of growth curves. We conducted this retrospective study to evaluate the effects of steroids on mechanical ventilation, oxygen therapy, hospital length stay and mortality, in ventilator-dependent infants with bronchopulmonary dysplasia (BPD) (defined as the need of oxygen supplementation at 28 days of life). Twenty-six newborns with BPD were evaluated during 9 -- 42 days postpartum (mean = 31 days) and were divided into two groups: Group I - 14 newborns that did not receive dexamethasone, and Group II - 12 newborns that received dexamethasone at 14 --21 days of life. Dexamethasone was given at a dose of 0.25 mg per kilogram of body weight twice daily intravenously for 3 days, after which the dose was tapered. RESULTS: There were no statistically significant differences in the mean length of mechanical ventilation (Group I - 37 days, Group II - 35 days); oxygen supplementation (Group I - 16 days, Group II - 29 days); hospital stay (Group I - 72 days, Group II - 113 days); mortality (Group I - 35.7%, Group II - 41.6%). At birth, Group II was lighter (BW: Group I - 1154 grams ± 302, Group II - 791 grams ± 165; p < 0.05) and smaller (height: Group I - 37.22 cm ± 3.3, Group II - 33.5 ± 2.4; p< 0.05) than Group I. At 40 weeks, there were no statistically significant differences between groups in relation to anthropometric measurements. CONCLUSIONS: The use of corticosteroids in bronchopulmonary dysplasic infants may influence the somatic growth during its use. However, after its suspension, a recovery seems to occur, suggesting that its influence could be transitory.

Earthen plasters based on illitic soils from Barrocal region of Algarve: contributions for building performance and sustainability

Clayish earth-based mortars can be considered eco-efficient products for indoor plastering since they can contribute to improve important aspects of building performance and sustainability. Apart from being products with low embodied energy when compared to other types of mortars used for interior plastering, mainly due to the use raw clay as natural binder, earth-based plasters may give a significant contribution for health and comfort of inhabitants. Due to high hygroscopicity of clay minerals, earth-based mortars present a high adsorption and desorption capacity, particularly when compared to other type of mortars for interior plastering. This capacity allows earth-based plasters to act as a moisture buffer, balancing the relative humidity of the indoor environment and, simultaneously, acting as a passive removal material, improving air quality. Therefore, earth-based plasters may also passively promote the energy efficiency of buildings, since they may contribute to decreasing the needs of mechanical ventilation and air conditioning. This study is part of an ongoing research regarding earth-based plasters and focuses on mortars specifically formulated with soils extracted from Portuguese ‘Barrocal’ region, in Algarve sedimentary basin. This region presents high potential for interior plastering due to regional geomorphology, that promote the occurrence of illitic soils characterized by a high adsorption capacity and low expansibility. More specifically, this study aims to assess how clayish earth and sand ratio of mortars formulation can influence the physical and mechanical properties of plasters. For this assessment four mortars were formulated with different volumetric proportions of clayish earth and siliceous sand. The results from the physical and mechanical characterization confirmed the significantly low linear shrinkage of all the four mortars, as well as their extraordinary adsorption-desorption capacity. These results presented a positive correlation with mortars´ clayish earth content and are consistent with the mineralogical analysis, that confirmed illite as the prevalent clay mineral in the clayish earth used for this study. Regarding mechanical resistance, although the promising results of the adhesion test, the flexural and compressive strength results suggest that the mechanical resistance of these mortars should be slightly improved. Considering the present results the mortars mechanical resistance improvement may be achieved through the formulation of mortars with higher clayish earth content, or alternatively, through the addition of natural fibers to mortars formulation, very common in this type of mortars. Both those options will be investigated in future research.

Hemolytic disease of the newborn due to anti-U

Anti-U is a rare red blood cell alloantibody that has been found exclusively in blacks. It can cause hemolytic disease of the newborn and hemolytic transfusion reactions. We describe the case of a female newborn presenting a strongly positive direct antiglobulin test due to an IgG antibody in cord blood. Anti-U was recovered from cord blood using acid eluate technique. Her mother presented positive screening of antibodies with anti-U identified at delivery. It was of IgG1 and IgG3 subclasses and showed a titer of 32. Monocyte monolayer assay showed moderate interaction of Fc receptors with maternal serum with a positive result (3.1%). The newborn was treated only with 48 hours of phototherapy for mild hemolytic disease. She recovered well and was discharged on the 4th day of life. We conclude that whenever an antibody against a high frequency erythrocyte antigen is identified in brown and black pregnant women, anti-U must be investigated.

Field oriented control of an axial flux permanent magnet synchronous motor for traction solutions

Electric Vehicles (EVs) are increasingly used nowadays, and different powertrain solutions can be adopted. This paper describes the control system of an axial flux Permanent Magnet Synchronous Motor (PMSM) for EVs powertrain. It is described the implemented Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique. Also, the mathematical model of the PMSM is presented. Both, simulation and experimental, results with different types of mechanical load are presented. The experimental results were obtained using a laboratory test bench. The obtained results are discussed.

Moisture-induced degradation of interfacial bond in FRP-strengthened masonry

Externally bonded strengthening of masonry structures using Fiber Reinforced Polymers (FRPs) has been accepted as a promising technique. Although the effectiveness of FRPs in improving the performance of masonry components has been extensively investigated, their long-term performance and durability remain poorly addressed. This paper, tackling one of the aspects related to durability of these systems, presents an experimental investigation on the effect of long-term (one year) water immersion on the performance of GFRP-strengthened bricks. The tests include materials' mechanical tests, as well as pull-off and single-lap shear bond tests, to investigate the changes in material properties and bond behavior with immersion time, respectively. The effect of mechanical surface treatment on the durability of the strengthened system as well as the reversibility of the degradation upon partial drying are also investigated. The experimental results are presented and critically discussed.

Antibacterial activity of textiles for wound treatment

Major advances in the development and use of antimicrobial textiles to control bacterial proliferation on wound beds continue. However, wound dressings are, in general, not included in standardized regimens for measuring and monitoring their antimicrobial effectiveness. This work adapts these methods to assess the antibacterial activity of textiles designed for wound healing purposes. Environmental conditions representative of those present at the wound site (i.e., moisture levels, infection, and available nutrients) were evaluated. This work shows that moisture levels were the environmental factor that had the greatest influence on the antimicrobial agent activities tested. These results suggest that it is possible to use the more representative environmental conditions present on the wound bed for in vitro screening of textile antimicrobial activity.

Development of ductile cementitiuos composites using carbon nanotubes

Concrete is the primary construction material for civil infrastructures and generally consists of cement, coarse aggregates, sand, admixtures and water. Cementitious materials are characterized by quasi-brittle behaviour and susceptible to cracking [1]. The cracking process within concrete begins with isolated nano-cracks, which then conjoin to form micro-cracks and in turn macro-cracks. Formation and growth of cracks lead to loss of mechanical performance with time and also make concrete accessible to water and other degrading agents such as CO2, chlorides, sulfates, etc. leading to strength loss and corrosion of steel rebars. To improve brittleness of concrete, reinforcements such as polymeric as well as glass and carbon fibers have been used and microfibers improved the mechanical properties significantly by delaying (but could not stop) the transformation of micro-cracks into macro forms [2]. This fact encouraged the use of nano-sized fillers in concrete to prevent the growth of nano-cracks transforming in to micro and macro forms. Nanoparticles like SiO2, Fe2O3, and TiO2 led to considerable improvement in mechanical performance and moreover, nano-TiO2 helped to remove organic pollutants from concrete surfaces [3].

Prediction of drug targets in human pathogens

The identification of new and druggable targets in bacteria is a critical endeavour in pharmaceutical research of novel antibiotics to fight infectious agents. The rapid emergence of resistant bacteria makes today's antibiotics more and more ineffective, consequently increasing the need for new pharmacological targets and novel classes of antibacterial drugs. A new model that combines the singular value decomposition technique with biological filters comprised of a set of protein properties associated with bacterial drug targets and similarity to protein-coding essential genes of E. coli has been developed to predict potential drug targets in the Enterobacteriaceae family [1]. This model identified 99 potential target proteins amongst the studied bacterial family, exhibiting eight different functions that suggest that the disruption of the activities of these proteins is critical for cells. Out of these candidates, one was selected for target confirmation. To find target modulators, receptor-based pharmacophore hypotheses were built and used in the screening of a virtual library of compounds. Postscreening filters were based on physicochemical and topological similarity to known Gram-negative antibiotics and applied to the retrieved compounds. Screening hits passing all filters were docked into the proteins catalytic groove and 15 of the most promising compounds were purchased from their chemical vendors to be experimentally tested in vitro. To the best of our knowledge, this is the first attempt to rationalize the search of compounds to probe the relevance of this candidate as a new pharmacological target.