Combustion and Thermal Decomposition of Ammonium Perchlorate-Aluminium Composite Pellets: Mechanism for Aluminium Participation

Thermal behaviour of ammonium perchlorate-aluminium composites is studied using differential thermal analysis, thermogravimetry and differential scanning calorimetry. Electrical resistivity studies throw light on the mechanism of ammonium perchlorate decomposition at different aluminium contents. The differences observed in burning behaviour by earlier authors is explained in terms of porosity and thermal conductivity of the composite.

Thin-walled timber and FRP-timber veneer composite CEE-sections

This paper compares the structural performance between thin-walled timber and FRP-timber composite Cee-sections. While, thin-walled composite timber structures have been proven to be efficient and ultra-light structural elements, their manufacturing is difficult and labour intensive. Significant effort and time is required to prevent the cracking of the transverse timber veneers, bent in the grain direction, when forming the cross-sectional shape. FRP-timber structures overcome this disadvantage by replacing the transverse veneers with flexible, unidirectional FRP material and only keeping the timber veneers which are bent in their natural rolling direction. The Cee-sections investigated in this study were 210 mm deep × 90 mm wide × 500 mm high and manufactured from five plies. For both section types, the three internal plies were thin (1 mm thick) softwood Hoop pine (Araucaria cunninghamii) veneers, orientated along the section longitudinal axis. The two outer layers, providing bending stiffness to the walls, were Hoop pine veneers (1 mm thick) for the timber sections and glass fibre reinforced plastic (0.73 mm thick) for the FRP-timber sections orientated perpendicular to the inner layers. The manufacturing process is briefly introduced in this paper. The profiles were fitted with strain gauges and tested in compression. Linear Variable Displacement Transducers also recorded the buckling along one flange. The test results are presented and discussed in this paper in regards to their structural behaviour and performance. Results showed that the use of FRP in the sections increases both the elastic local buckling load and section capacity, the latter being increased by about 24 percent. The results indicate that thin-walled FRP-timber can ultimately be used as a sustainable alternative to cold-formed steel profiles.

Accounts of K. K. S. I.--Building maintenance and repair

Digital image

Thermal Decomposition Studies on Ammonium Perchlorate—Polybutadiene Composite Propellant

The thermal decomposition of ammonium perchlorate based solid composite propellant using carboxyl terminated polybutadiene as binder has been studied employing thermogravimetry and differential thermal analysis techniques. The thermal decomposition characteristics of the propellant have been found to be quite similar to those of pure ammonium perchlorate with activation energy, 32 Kcal/mole and 60 Kcal/mole respectively in the low and high temperature regions. The effect of the sample size and shape on the thermal decomposition has also been evaluated.

Factors influencing kinetic and equilibrium behaviour of sodium ion exchange with strong acid cation resin

This study reports an investigation of the ion exchange treatment of sodium chloride solutions in relation to use of resin technology for applications such as desalination of brackish water. In particular, a strong acid cation (SAC) resin (DOW Marathon C) was studied to determine its capacity for sodium uptake and to evaluate the fundamentals of the ion exchange process involved. Key questions to answer included: impact of resin identity; best models to simulate the kinetics and equilibrium exchange behaviour of sodium ions; difference between using linear least squares (LLS) and non-linear least squares (NLLS) methods for data interpretation; and, effect of changing the type of anion in solution which accompanied the sodium species. Kinetic studies suggested that the exchange process was best described by a pseudo first order rate expression based upon non-linear least squares analysis of the test data. Application of the Langmuir Vageler isotherm model was recommended as it allowed confirmation that experimental conditions were sufficient for maximum loading of sodium ions to occur. The Freundlich expression best fitted the equilibrium data when analysing the information by a NLLS approach. In contrast, LLS methods suggested that the Langmuir model was optimal for describing the equilibrium process. The Competitive Langmuir model which considered the stoichiometric nature of ion exchange process, estimated the maximum loading of sodium ions to be 64.7 g Na/kg resin. This latter value was comparable to sodium ion capacities for SAC resin published previously. Inherent discrepancies involved when using linearized versions of kinetic and isotherm equations were illustrated, and despite their widespread use, the value of this latter approach was questionable. The equilibrium behaviour of sodium ions form sodium fluoride solution revealed that the sodium ions were now more preferred by the resin compared to the situation with sodium chloride. The solution chemistry of hydrofluoric acid was suggested as promoting the affinity of the sodium ions to the resin.

A review on exploring the behavior of multi-layer composite structures under dynamic loading

This paper reviews the recent research progress on multi-layer composite structures composed of variety of materials. The utilization of multi-layer composite system is found to be common in metal structures and pavement systems. The layer of composite structure designed to encounter heavy dynamic energy should have sufficient ductility to counteract the intensity of energy. Therefore, the selection of materials and enhancement of interface bonding become crucial and both are discussed in this paper. The failure modes have also been explored in conjunction with stresses at failures and inferred solutions are also revealed. The paper attempts to reveal all technical facts on multi-layer composite structure in a broad field.

Combustion and thermal decomposition characteristics of composite solid propellants

The role of thermal decomposition of the binder and the oxidiser in the thermal decomposition, ageing and combustion of composite solid-propellants has been investigated. The present study shows that the burning rate and ageing of polystyrene and ammonium perchlorate propellant are related to the thermal decomposition of the propellant itself and ammonium perchlorate.

Decomposition technique for composite signals

A new method for decomposition of compo,.~itsei gnals is presented. It is shown that high freyuency portion of composite signal spectrum possesses information on echo structure. The proposed technique does not assume the shape of basic wavelet and does not place any restrictions on the amplitudes and arrival times of echoes inm the composite signal. In the absence of noise any desirrd resolution can he obtained The effect of sampling rate and jFequency window function on echo resolutio.~ are di.wussed. Voiced speech segment is considered as an example of conzpxite sigrnl to demonstrate the application of the decomposition technique.

Pathogenicity, functional significance and clinical phenotype of mismatch repair gene MSH2 variants found in cancer patients

DNA ja siinä sijaitsevat geenit ohjaavat kaikkea solujen toimintaa. DNA-molekyyleihin kuitenkin kertyy mutaatioita sekä ympäristön vaikutuksen, että solujen oman toiminnan tuloksena. Mikäli virheitä ei korjata, saattaa tuloksena olla solun muuttuminen syöpäsoluksi. Soluilla onkin käytössä useita DNA-virheiden korjausmekanismeja, joista yksi on ns. mismatch repair (MMR). MMR vastaa DNA:n kahdentumisessa syntyvien virheiden korjauksesta. Periytyvät mutaatiot geeneissä, jotka vastaavat MMR-proteiinien rakentamisesta, aiheuttavat ongelmia DNA:n korjauksessa ja altistavat kantajansa periytyvälle ei-polypoottiselle paksusuolisyöpäoireyhtymälle (hereditary nonpolyposis colorectal cancer, HNPCC). Yleisimmin mutatoituneet MMR-geenit ovat MLH1 ja MSH2. HNPCC periytyy vallitsevasti, eli jo toiselta vanhemmalta peritty geenivirhe altistaa syövälle. MMR-geenivirheen kantaja sairastuu syöpään elämänsä aikana suurella todennäköisyydellä, ja sairastumisikä on vain noin 40 vuotta. Syövälle altistavan geenivirheen löytäminen mutaation kantajilta on hyvin tärkeää, sillä säännöllinen seuranta mahdollistaa kehittymässä olevan kasvaimen havaitsemisen ja poistamisen jo aikaisessa vaiheessa. Tämän on osoitettu alentavan syöpäkuolleisuutta merkittävästi. Varma tieto altistuksen alkuperästä on tärkeä myös niille syöpäsuvun jäsenille, jotka eivät kanna kyseistä mutaatiota. Syövälle altistavien mutaatioiden ohella MMR-geeneistä löydetään säännöllisesti muutoksia, jotka ovat normaalia henkilöiden välistä geneettistä vaihtelua, eikä niiden oleteta lisäävän syöpäaltistusta. Altistavien mutaatioiden erottaminen näistä neutraaleista variaatioista on vaikeaa, mutta välttämätöntä altistuneiden tehokkaan seurannan varmistamiseksi. Tässä väitöskirjassa tutkittiin 18:a MSH2 -geenin mutaatiota. Mutaatiot oli löydetty perheistä, joissa esiintyi paljon syöpiä, mutta niiden vaikutus DNA:n korjaustehoon ja syöpäaltistukseen oli epäselvä. Työssä tutkittiin kunkin mutaation vaikutusta MSH2-proteiinin normaaliin toimintaan, ja tuloksia verrattiin potilaiden ja sukujen kliinisiin tietoihin. Tutkituista mutaatiosta 12 aiheutti puutteita MMR-korjauksessa. Nämä mutaatiot tulkittiin syövälle altistaviksi. Analyyseissä normaalisti toimineet 4 mutaatiota eivät todennäköisesti ole syynä syövän syntyyn kyseisillä perheillä. Tulkinta jätettiin avoimeksi 2 mutaation kohdalla. Tutkimuksesta hyötyivät suoraan kuvattujen mutaatioiden kantajaperheet, joiden geenivirheen syöpäaltistuksesta saatiin tietoa, mahdollistaen perinnöllisyysneuvonnan ja seurannan kohdentamisen sitä tarvitseville. Työ selvensi myös mekanismeja, joilla mutatoitunut MSH2-proteiini voi menettää toimintakykynsä.

Mechanistic Studies on Composite-Solid Propellants

Abstract is not available.

Cooling of a composite slab

A mixed boundary value problem associated with the diffusion equation, that involves the physical problem of cooling of an infinite parallel-sided composite slab, is solved completely by using the Wiener-Hopf technique. An analytical expression is derived for the sputtering temperature at the quench front being created by a cold fluid moving on the upper surface of the slab at a constant speed v. The dependence of the various configurational parameters of the problem under consideration, on the sputtering temperature, is rather complicated and representative tables of numerical values of this important physical quantity are prepared for certain typical values of these parameters. Asymptotic results in their most simplified forms are also obtained when (i) the ratio of the thicknesses of the two materials comprising the slab is very much smaller than unity, and (ii) the quench-front speed v is very large, keeping the other parameters fixed, in both the cases.