Análise de poliembrionia em Citrus, máxime em toranjas

1 - This paper is a joined publication of the Dept. of Genetics, Escola Superior de Agricultura "Luiz de Queiroz", University of São Paulo, and Secção de Citricultura e Frutas Tropicais, Instituto Agronômico, de Campinas, and deal with the number of seed per fruit and the polyembryony in Citrus, with special reference to the pummelos (C. grandis). 2 - For C. pectinifera, hibrid limon x acid lime, C. histrix and Citrus sp. the mean of seeds per fruit is 5,8 - 17,3 - 30,2 -94,6; for 14 pummelos the average was 100 and the range of variation 11 to 185 seeds per fruit. For the four above mentioned Citrus the cotyledons were classified into 3 types: big (near 8 mm.), medium (near 6 mm) and small (near 4 mm) and for the pummelos there was only one size of cotyledons, about 10 mm (table 1). 3 - The polyembryony was determined by two processes: a) counting of the embryos in the mature seed; b) counting after germination in flats or seed-beds. The rasults obtained are in table 2; the process a gave larger results than process b.The following pummelos are monoembryonics: melancia, inerme, Kaune Paune, sunshine, vermelha, Singapura, periforme, Zamboa, doce, Indochina, Lau-Tau, Shantenyau and Siamesa. Sometime it was found a branching of the main stem that gave a impression of polyembryonic seeds. 4 - It was shown by the x2 test that the distribution of embryo numbers fits the Poisson's series (table 2) in both processes. 5 - It is discussed in table 2 the variability of polyembryony for the following cases: a) between plants, within years. The teste for the differences of mean of polyembryony between 3 plants of C. pectinifera is statistically significant in 1948 and 1949; b) between yields of the same plant, within year. The same case of C. pectinifera may be used for this purpose; c) between process, within year. It is shown in table 3, for C. pectinifera and the hibrid "limon x acid lime" that there is a statistically signicicant between both process above mentioned.

Precipitation of barium sulfate in a semi-batch stirred tank reactor : influence of feeding policy on particle size and morphology

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2012

Size and scaling in the Indian frogs Nyctibatrachus and Nannobatrachus (Ranidae) : a contribution in celebration of the distinguished scholarship of Robert F. Inger on the occasion of his sixty-fifth birthday / H. Bradley Shaffer.

n.s. no.46(1988)

The distribution, size, and reproduction of the pedunculate barnacle, Octolasmis mülleri (Coker, 1902), on the blue crab, Callinectes sapidus (Rathburn, 1896) / William B. Jeffries, Harold K. Voris.

n.s. no.16(1983)

Mice of the Akodon boliviensis size class (Sigmodontinae, Cricetidae), with the description of two new species from Brazil / Philip Hershovitz.

n.s. no.57(1990)

The influence of shell species and size on the shell selection pattern of Paguristes tortugae (Decapoda, Diogenidae) from Anchieta Island (Ubatuba, Brazil)

Shell selection by the hermit crab Paguristes tortugae Schmitt, 1933 from Anchieta Island (Brazil) was analyzed using the six most frequently occupied shell species in the field and taking into account the sexual condition of the individuals, the shell size and the shell species. The experiments were conducted under laboratory conditions and the shell species preference was estimated on the basis of the frequency that each species was chosen by the individuals. The preferred shell species and size were determined by regression analysis. The highest correlation coefficients were obtained for the relations between the hermit dimensions and shell dry weight. The ovigerous females preferred shells with larger internal volume: Leucozonia nassa (Gmelin, 1791) and Cerithium atratum (Born, 1778). In the experiment of shell size, males preferred heavier shells whereas females selected the shape characteristics of the shell, such as the aperture and the internal volume, which are probably related to the growth and offspring guarantee, respectively. In general, and independent of sex condition, P. tortugae showed significant selection among all shells utilized. The results suggest that shell selection by P. tortugae involves sexual and reproductive condition preferences.

Reproductive biology of the sesarmid crab Armases rubripes (Decapoda, Brachyura) from an estuarine area of the Sahy River, Sepetiba Bay, Rio de Janeiro, Brazil

The aim of this work was to gain knowledge about reproductive biology of the crab Armases rubripes (Rathbun, 1897) from an estuarine area of the Sepetiba Bay. Samples were taken monthly from February 2003 to January 2004 in the Sahy River estuary (22º56'S; 44º01'W), Rio de Janeiro, Brazil. The crabs were collected by hand during 15-minute catch-effort sessions conducted by two people. In the laboratory, the specimens were separated by sex, carapace width was measured and gonadal stage was checked macroscopically. A total of 830 individuals were caught - 304 males, 373 females (60 ovigerous females) and 153 juveniles. The ovigerous females were found almost year-round, except in November and April, showing a continuous reproductive period. They presented a size range from 8.2 to 15.0 mm carapace width (12.1 ± 1.7 mm). Color and macroscopical aspects determined five gonadal stages for males and females (immature, rudimentary, intermediary, developed and resting). First sexual maturity was estimated at 6.5 mm of carapace width for males and 8.1 mm for females. Individual fecundity varied from 200 to 11,460 eggs (4,458 ± 2,739 eggs). Mean egg size was 0.248 ± 0.026 mm, varying from 0.213 to 0.333 mm, while the volume ranged from 0.0051 to 0.0188 mm³ (0.0082 ± 0.0029 mm³).

Temperature-sex determination in Podocnemis expansa (Testudines, Podocnemididae)

This study has been carried out at the central region of the Araguaia river on the border between the states of Goiás and Mato Grosso in the Brazilian Amazon Basin from September to December 2000. We recorded temperature fluctuation, clutch-size, incubation period and hatching success rate and hatchlings' sex ratio of five nests of Podocnemis expansa (Schweigger, 1812). Despite the relatively small sample size we infer that: a) nests of P. expansa in the central Araguaia river have a lower incubation temperature than nests located further south; however, incubation period is shorter, hatching success rate is lower and clutch-size is larger; b) Podocnemis expansa may present a female-male-female (FMF) pattern of temperature sex-determination (TSD); c) thermosensitive period of sex determination apparently occur at the last third of the incubation period; and, d) future studies should prioritize the relationship between temperature variation (i.e., range and cycle) and embryos development, survivorship and sex determination.

Sexual dimorphism in Amphisbaena nigricauda (Reptilia, Squamata, Amphisbaenidae) from Southeastern Brazil

Amphisbaena nigricauda Gans, 1966 is a small, poorly known amphisbaenid endemic to the restinga of the states of Espírito Santo and Bahia, Brazil. We analyze 178 specimens collected in Vitória municipality, state of Espírito Santo, Brazil, to investigate whether this species show sexual dimorphism in pre-cloacal pores and in morphological characters. Sex was determined by a ventral incision and direct inspection of gonads. A PCA analysis was performed to generate a general body size measurement. A T test and the non-parametric Mann-Whitney test were used to assess whether this species show sexual dimorphism on five morphometric and five meristic characters, respectively. Sex could not be determined in 36 specimens because they were mutilated in the posterior portion of their bodies. The diagnosis of the species is redefined based on this sample size: the smallest number of body annuli changes from 222 to 192, the number of dorsal and ventral segments in an annulus in the middle of the body changes to 9-11/13-16 (instead of 10/16), and the autotomic tail annulus lies between annulus 7-10 (instead of 6-9). The number of tail annuli remained within the known range of variation of the species (19-24). None of the 80 females analyzed showed pre-cloacal pores, whereas within males 59 out of 62 specimens displayed four and two specimens displayed five pre-cloacal pores. A single male did not possess pre-cloacal pores, but showed irregular scales on its cloacal region. Sex-based difference based on presence or absence of pre-cloacal pores as well as males with wider head was seen in other Neotropical amphisbaenids. However, a pattern of body size differences between males and females has not been identified so far in the few amphisbaenid species studied in this regard. Further studies on this taxonomic group are still needed to elucidate the existence of general patterns of sexual dimorphism and to identify the selective pressures driving these patterns.

Shape and size variations of Aegla uruguayana (Anomura, Aeglidae) under laboratory conditions: A geometric morphometric approach to the growth

Crustacean growth studies typically use modal analysis rather than focusing on the growth of individuals. In the present work, we use geometric morphometrics to determine how organism shape and size varies during the life of the freshwater crab, Aegla uruguayana Schmitt, 1942. A total of 66 individuals from diverse life cycle stages were examined daily and each exuvia was recorded. Digital images of the dorsal region of the cephalothorax were obtained for each exuvia and were subsequently used to record landmark configurations. Moult increment and intermoult period were estimated for each crab. Differences in shape between crabs of different sizes (allometry) and sexes (sexual dimorphism; SD) were observed. Allometry was registered among specimens; however, SD was not statistically significant between crabs of a given size. The intermoult period increased as size increased, but the moult frequency was similar between the sexes. Regarding ontogeny, juveniles had short and blunt rostrum, robust forehead region, and narrow cephalothorax. Unlike juveniles crabs, adults presented a well-defined anterior and posterior cephalothorax region. The rostrum was long and stylised and the forehead narrow. Geometric morphometric methods were highly effective for the analysis of aeglid-individual- growth and avoided excessive handling of individuals through exuvia analysis.

Firm Size and Geographical Aggregation: An Empirical Appraisal in Industrial Location

This paper assesses empirically the importance of size discrimination and disaggregate data for deciding where to locate a start-up concern. We compare three econometric specifications using Catalan data: a multinomial logit with 4 and 41 alternatives (provinces and comarques, respectively) in which firm size is the main covariate; a conditional logit with 4 and 41 alternatives including attributes of the sites as well as size-site interactions; and a Poisson model on the comarques and the full spatial choice set (942 municipalities) with site-specific variables. Our results suggest that if these two issues are ignored, conclusions may be misleading. We provide evidence that large and small firms behave differently and conclude that Catalan firms tend to choose between comarques rather than between municipalities. Moreover, labour-intensive firms seem more likely to be located in the city of Barcelona. Keywords: Catalonia, industrial location, multinomial response model. JEL: C250, E30, R00, R12

A territorial approach to firm entry: The effect of city size

This paper concerns the effects of territorial factors on the processes involved in the creation of manufacturing firms in Spanish cities. Most contributions have focused on regional factors rather than urban ones. Here we assume that it is possible to identify certain urban factors that attract new firms. We use data for the entry of firms in Spanish manufacturing industries between 1994 and 2002. This paper contributes to the existing literature on market entry. Key words: cities, regions, firm entry and Spanish economy. JEL: R0, R12, L60

Firm Size and Short-Term Dynamics in Aggregate Entry and Exit

Much of the research on industry dynamics focuses on the interdependence between the sectorial rates of entry and exit. This paper argues that the size of firms and the reaction-adjustment period are important conditions missed in this literature. I illustrate the effects of this omission using data from the Spanish manufacturing industries between 1994 and 2001. Estimates from systems of equations models provide evidence of a conical revolving door phenomenon and of partial adjustments in the replacement-displacement of large firms. KEYWORDS: aggregation, industry dynamics, panel data, symmetry, simultaneity. JEL CLASSIFICATION: C33, C52, L60, L11

Production and carcass quality of ten beef cattle breeds of the southwest of Europe

A sample of about 70 young bulls of each of ten beef cattle breeds reared in their typical production systems has been studied regarding growth and carcass quality traits. Breeds included were Asturiana de los Valles (AV), Asturiana de la Montaña (AM), Avileña-Negra Ibérica (A-NI), Bruna dels Pirineus (BP), Morucha (Mo), Pirenaica (Pi) and Retinta (Re) from Spain, and Aubrac (Au), Gasconne (Ga) and Salers (Sal) from France. There existed large differences between breeds and also within breeds. AV and Pi were the breeds with more muscle and less fat, whereas A-NI, Mo and Re were in the opposite side. BP and AM occupied an intermediate position. This allows to classify the Spanish breeds in three groups: AV and Pi would belong to the group of late maturity, A-NI, Mo and Re, would be early maturing breeds, whereas BP and AM, despite the small size of the last, will be of intermediate maturity. In the French populations, Au was the breed with the highest carcass weight and Ga exhibited the lowest. Sal occupied an intermediate position, showing the longer and thinner thigh. In a wide range of carcass weight, the general relationships among carcass traits have been confirmed. Animals with the better conformation were also the leaner and longer carcasses tended to be lowly associated with a poorer conformation and fatter carcasses. Bone content was clearly opposed to carcass conformation and muscle content and was associated with longer carcasses

Why are offspring born larger when it is colder? Phenotypic plasticity for offspring size in the cladoceran Simocephalus vetulus (Müller)

It has been predicted on theorerical grounds (Sibly & Calow, 1983; Taylor & Williams, 1984) that optimal offspring size should be highly sensitive to juvenile growth and survival rates. To test such models, genetically-identical individuals of Simicephalus vetulus were reared at different temperatures and monitored for offspring size and juvenile growth rate. As adult size correlates negatively with temperature, an analysis of covariance was performed to separate the effects of temperature and maternal size. The result is that offspring size indeed correlates negatively with juvenile growth rate. Comparisons are made with field observation of several authors on seasonal variation of offspring size and alternative explanations are discussed. It is concluded that present experiments support the prediction of the theoretical models.