El lavado de manos: ¿una recomendación atendida?

Objective: to determine the incidence of hand washing in parents as a preventive factor in the spread of viral respiratory infections in children under two years assigned to an urban pediatric basic health area affected by catarrhal symptoms during the influenza vaccination campaign. Material and methods: from 230 children under two years included in the basic health area attending the Well Child program, 51 consulted during the influenza vaccination campaign (October 2011) by catarrhal symptoms. Results: fifty-one children were included, 23 male and 28 female. From the clinical point of view, 33 cases were afebrile and only 18 had fever, runny nose 100%. The clinic diagnosis in 44 cases was nasopharyngitis, acute bronchitis in 5 cases and obstructive bronchiolitis in 2 cases. No family history in 19, however 32 cases had a family member with catarrhal symptoms. As for the performance of hand washing as a preventive measure, 34 cases said they did not comply with this measure, only 17 cases did, despite the recommendations. Conclusions: while recognizing the importance of hand washing as a preventive measure for respiratory infections and being included among the recommendations offered in the well child program, only 33% of the population of our study reported washing hands. This recommendation should also be included in consultations on demand during the influenza season to encourage compliance.

Assisted reproductive technology and obstetric outcome in couples when the male partner has a chronic viral disease.

BACKGROUND Assisted reproductive technology (ART) with washed semen can achieve pregnancy with minimal risk of horizontal and vertical transmission of chronic viral diseases (CVD) such as human immunodeficiency virus (HIV), hepati- tis C virus (HCV) and hepatitis B virus (HBV) among serodiscordant couples. How- ever, few studies have been made of the use made by these couples of ARTs or of the obstetric results achieved. MATERIALS AND METHODS In this retrospective study, 93 men who were seropositive for HIV, HCV or HBV and who underwent assisted reproduction treatment at our centre (Hospital Universitario Virgen de las Nieves, Granada, Spain) were included. Washed semen was tested to detect viral particles. Non-infected women were tested before and after each treatment, as were the neonates at birth and after three months. RESULTS A total of 62 sperm samples were washed, and none were positive for the detec- tion of viral molecules. Semen samples from 34 HBV positive males were not washed since the female partner had immunity to hepatitis B. In total, 38 clinical pregnancies were achieved (22% per cycle and 40.9% per couple) out of 173 cycles initiated, and 28 births were achieved (16.2% per cycle and 30.1% per couple), producing 34 live births. The rate of multiple pregnancies was 21.4%. Obstetric and neonatal results were similar in the groups of couples studied. At follow-up, no seroconversion was detected in the women or neonates. CONCLUSION Sperm washing and intracytoplasmic sperm injection are shown to be a safe and effective option for reducing the risk of transmission or super infection in serodiscordant or concordant couples who wish to have a child. Pregnancies ob- tained by ART in couples when the male is CVD infected achieve good obstetric and neonatal results.

Calbindin D-28k- and substance P-immunoreactive primary sensory neurons: peripheral projections in chick hindlimbs.

The peripheral projections of two distinct subpopulations of primary sensory neurons, expressing either calbindin D-28k or substance P, were studied in chick hindlimbs by immunodetecting calbindin D-28k with a rabbit antiserum and substance P with a mouse monoclonal antibody. Calbindin D-28k-immunoreactive axons provided an innervation restricted to specific mechanoreceptors such as muscle spindles, Herbst and Merkel corpuscles, or collars of feather follicles but were absent from Golgi tendon organs. In contrast, substance P-positive axons spread out diffusely in muscles and skin, formed loose plexuses, and extended free branches to the endomysium, arteries, superficial dermis, or dermal pulp of feather follicles. The present results show that calbindin D-28k- and substance P-immunoreactive primary sensory neurons provide distinct modes of innervation to selective targets in peripheral tissues. The results suggest a possible correlation between CaBP-expressing nerve endings and rapidly adapting mechanoreceptors.

Disseny i muntatge d'un sistema de depuració ciclònica per reciclatge de paper

El projecte s’emmarca dins de l’àmbit de la indústria paperera, i dins el procés defabricació del paper es centra concretament amb l’etapa de la depuració ciclònica, una etapa en la qual es pretenen eliminar aquelles partícules sòlides que acompanyen la pasta de paper i que no són desitjables ja que afecten les característiques del paper i el funcionament de la resta d’equips del procés de fabricació. Es presenta una demanda de projecte per part del grup LEPAMAP (Laboratori d’Enginyeria Paperera i Materials Polímers) sobre el disseny d’una instal•lació de depuració ciclònica, mitjançant un hidrocicló, per realitzar activitats de recerca. Un hidrocicló és un equip que separa gràcies a la força centrífuga del flux d’entrada i pel seu disseny amb forma de con invertit. Així doncs, els objectius bàsics d’aquest projecte són dissenyar una instal•lació de depuració adequada per depurar una pasta de paper de possibles contaminants sòlids, la qual cosa implica el disseny d’una bomba centrífuga per impulsar el flux cap a l’interior de l’hidrocicló, dipòsits per emmagatzemar i preparar la suspensió, un agitador per mantenir en tot moment la homogeneïtat de la suspensió i uns dispositius de mesura i control per mesurar i controlar variables com el cabal, la pressió o el volum.El segon objectiu tracta de posar en marxa la instal•lació i comprovar si aquest equip,l’hidrocicló, separa correctament les partícules sòlides del flux de pasta.Paral•lelament s’ha estudiat quins són els equips de depuració més importants a laindústria paperera així com les etapes més importants que formen part del procés de fabricació del paper

Materials nanocomposits a partir de whiskers de cel•lulosa i matriu polimèrica de cautxú

De acuerdo con los objetivos generales del proyecto y plan de trabajo previsto, para esta anualidad, se obtuvieron fibras y microfibras de celulosa a partir de dos fuentes: celulosa vegetal de pino y eucalipto y celulosa bacterial. Las microfibrillas han sido utilizadas como material de refuerzo para la fabricación de materiales compuestos a partir de caucho natural, policaprolactona y polivinil alcohol. Las muestras se fabricaron mediante la técnica de "casting" en medio acuoso y temperatura ambiente. Las muestras fueron caracterizados en sus propiedades mecánicas, físicas y térmicas. Se observó que, en general, la adición de las microfibrillas de celulosa en las matrices poliméricas provoca una mejora sustancial en las propiedades mecánicas del material en comparación con el polímero sin reforzar. Los resultados pueden resumirse de la siguiente manera: 1.Fabricación de materiales compuestos a base de caucho natural y fibras de celulosa. Se obtuvieron fibras y nanofibras de celulosa que fueron modificadas químicamente y usadas como refuerzo en matriz de caucho. Los resultados mostraron mejora de propiedades mecánicas del material, principalmente en los materiales compuestos reforzados con nanofibras. 2. Obtención de whiskers de celulosa y su utilización como material de refuerzo en una matriz de policaprolactona. Se obtuvieron whiskers de celulosa a partir de pasta blanqueada. La adición en una matriz de policaprolactona produjo materiales compuestos con propiedades mecánicas superiores a la matriz, con buena dispersión de los whiskers. 3. Obtención de fibras de celulosa bacterial y nanofibras de celulosa, aislamiento y utilización sobre una matriz de polivinil alcohol. Se obtuvo celulosa bacterial a partir de la bacteria Gluconacetobacter xylinum. Además se fabricaron nanofibras de celulosa a partir eucalipto blanqueado. La celulosa bacterial como material de refuerzo no produjo importantes mejoras en las propiedades mecánicas de la matriz; en cambio se observaron mejoras destacables con la nanofibra como refuerzo.

Acoustic properties of polypropylene composites reinforced with stone groundwood

Currently, acoustic isolation is one of the problems raised with building construction in Spain. The publication of the Basic Document for the protection against noise of the Technical Building Code has increased the demand of comfort for citizens. This has created the need to seek new composite materials that meet the new required acoustical building codes. In this paper we report the results of the newly developed composites that are able to improve the acoustic isolation of airborne noise. These composites were prepared from polypropylene (PP) reinforced with mechanical pulp fibers from softwood (Pinus radiata). Mechanical and acoustical properties of the composites from mechanical pulp (MP) and polypropylene (PP) have been investigated and compared to fiberglass (FG) composites. MP composites had lower tensile properties compared with FG composites, although these properties can be improved by incorporation of a coupling agent. The results of acoustical properties of MP composites were reported and compared with the conventional composites based on fiberglass and gypsum plasterboards. Finally, we suggest the application of MP composites as a light-weight building material to reduce acoustic transmitions

Estudi de reactius químics alternatius per al blanqueig de pastes termomecàniques : efecte en les propietats òptiques de les pastes i en la qualitat dels efluents del procés

Aquest estudi s’emmarca en un projecte titulat “Noves possibilitats en el blanqueig en lespastes destintades: Alternatives al blanqueig amb sosa càustica i peròxid d’hidrogen” i estàsubvencionat per diverses empreses europees del sector. La seva realització s’ha dut a termeen el Centre Technique du Papier, a Grenoble, França. L’estudi contempla la realitzaciód’una part del projecte, i té per objecte analitzar els Na2SiO3 modificats, el hidròxid demagnesi (Mg(OH)2) i el hidròxid de calci (Ca(OH)2) per veure si poden actuar com asubstituts del NaOH. Cal intentar aconseguir valors de blancor similars als assolits amb elblanqueig estàndard i millorar substancialment la qualitat de les aigües. Segons el centre derecerca es pot considerar una millora projectable a nivell industrial una reducció de la DQO ide la demanda catiònica a partir d’un 10% a nivell experimental.La pasta que es blanqueja és TMP verge. Els resultats obtinguts a nivell de blancor tambépoden ser considerats aplicables en paper recuperat, prèviament destintat, provenintd’aquest tipus de pasta

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Bitumens in the late Variscan hydrothermal vein-type uranium deposit of Pribram, Czech Republic: Sources, radiation-induced alteration, and relation to mineralization

The late Variscan (275-278 Ma) Pribram uranium deposit is one of the largest known accumulations of uraniferous bitumens in hydrothermal veins. The deposit extends along the northwestern boundary of the Central Bohemian pluton (345-335 Ma) with low-grade metamorphosed Late Proterozoic and unmetamorphosed Cambrian rocks. From a net uranium production of 41,742 metric tons (t), more than 6,000 t were extracted from bitumen-uraninite ores during 43 years of exploration and mining. Three morphological varieties of solid bitumen are recognized: globular, asphaltlike, and cokelike. While the globular bitumen is uranium free, the other two types are uraniferous. The amount of bitumen in ore veins gradually decreases toward the contact with the plutonic body and increases with depth. Two types of bitumen microtextures are recognized using high-resolution transmission electron microscopy: amorphous and microporous, the former being less common in uraniferous samples. A lower Raman peak area ratio (1,360/1,575 cm(-1)) in mineralized bitumens (0.9) compared with uranium-free samples (2.0) indicates a lower degree of microtextural organization in the latter The H/C and O/C atomic ratios in uranium-free bitumens (0.9-1.1 and 0.09, respectively) are higher than those in mineralized samples (H/C = 0.3-0.8, O/C = 0.03-0.09). The chloroform extractable matter yield is Very low in uranium-free bitumens (0.30-0.35% of the total organic carbon,TOC) and decreases with uranium content increase. The extracted solid uraniferous bitumen infrared spectra show depletion in aliphatic CH2 and CH3 groups compared to uranium-free samples. The concentration of oxygen-bearing functional groups relative to aromatic bonds in the IR spectra of uranium-free and mineralized bitumen, however, do not differ significantly. C-13 NMR confirmed than the aromaticity of a uraniferous sample is higher (F-ar = 0.61) than in the uranium-free bitumen (F-ar = 0.51). Pyrolysates from uraniferous and nonuraniferous bitumens do not differ significantly, being predominantly cresol, alkylphenols, alkylbenzenes, and alkylnaphthalenes. The liquid pyrolysate yield decreases significantly with increasing uranium content. The delta(13)C Values of bulk uranium-free bitumens and low-grade uraniferous, asphaltlike bitumens range from -43.6 to 52.3 per mil. High-grade, cokelike, uraniferous bitumens are more C-13 depleted (54.5 to -58.4 parts per thousand). In contrast to the very light isotopic ratios of the high-grade uraniferous cokelike bitumen bulk carbon, the individual n-alkanes and isoprenoids (pristane and phytane) extracted from the same sample are significantly C-13 enriched. The isotopic composition of the C13-24 n-alkanes extracted from the high-grade uraniferous sample (delta(13)C = -28.0 to 32.6 parts per thousand) are heavier compared with the same compounds in a uranium-free sample (delta(13)C = 31.9 to 33.8 parts per thousand). It is proposed that the bitumen source was the isotopically light (delta(13)C = 35.8 to 30.2 parts per thousand) organic matter of the Upper Proterozoic host rocks that were pyrolyzed during intrusion of the Central Bohemian pluton. The C-13- depleted pyrolysates were mobilized from the innermost part of the contact-metamorphic aureole, accumulated in structural traps in less thermally influenced parts of the sedimentary complex and were later extracted by hydrothermal fluids. Bitumens at the Pribram deposit are younger than the main part of the uranium mineralization and were formed through water-washing and radiation-induced polymerization of both the gaseous and liquid pyrolysates. Direct evidence for pyrolysate reduction of uranium in the hydrothermal system is difficult to obtain as the chemical composition of the original organic fluid phase was modified during water-washing and radiolytic alteration. However, indirect evidence-e.g., higher O/C atomic ratios in uranium-free bitumens (0.1) relative to the Upper Proterozoic source rocks (0.02-0.05), isotopically very light carbon in associated whewellite (delta(13)C = 31.7 to -28.4 parts per thousand), and the striking absence of bitumens in the pre-uranium, hematite stage of the mineralization-indicates that oxidation of organic fluids may have contributed to lowering of aO(2) and uraninite precipitation.

Nanomotors: new strategies of (bio)sensing based on motion

Nanomotors are nanoscale devices capable of converting energy into movement and forces. Among them, self-propelled nanomotors offer considerable promise for developing new and novel bioanalytical and biosensing strategies based on the direct isolation of target biomolecules or changes in their movement in the presence of target analytes. The mainachievements of this project consists on the development of receptor-functionalized nanomotors that offer direct and rapid target detection, isolation and transport from raw biological samples without preparatory and washing steps. For example, microtube engines functionalized with aptamer, antibody, lectin and enzymes receptors were used for the direct isolation of analytes of biomedical interest, including proteins and whole cells, among others. A target protein was also isolated from a complex sample by using an antigen-functionalized microengine navigating into the reservoirs of a lab-on-a-chip device. The new nanomotorbased target biomarkers detection strategy not only offers highly sensitive, rapid, simple and low cost alternative for the isolation and transport of target molecules, but also represents a new dimension of analytical information based on motion. The recognition events can be easily visualized by optical microscope (without any sophisticated analytical instrument) to reveal the target presence and concentration. The use of artificial nanomachines has shown not only to be useful for (bio)recognition and (bio)transport but also for detection of environmental contamination and remediation. In this context, micromotors modified with superhydrophobic layer demonstrated that effectively interacted, captured, transported and removed oil droplets from oil contaminated samples. Finally, a unique micromotor-based strategy for water-quality testing, that mimics live-fish water-quality testing, based on changes in the propulsion behavior of artificial biocatalytic microswimmers in the presence of aquatic pollutants was also developed. The attractive features of the new micromachine-based target isolation and signal transduction protocols developed in this project offer numerous potential applications in biomedical diagnostics, environmental monitoring, and forensic analysis.

Advantages of a modified gastroscope for video-assisted internal mammary artery harvesting.

Instead of standard rigid thoracoscopes, we used a modified gastroscope for video assistance during 12 minimally invasive left internal mammary harvesting. Flexibility and remote control of its last centimeters give to the gastroscope a total freedom of movements, and perfect positioning in every direction. The scope is equipped with cold light, a suction canal and an irrigation canal, which allow for in situ washing without needing to remove it from the thoracic cavity. Thanks to these advantages, vision and lighting are always perfect.

Characterization of olive oil by carbon isotope analysis of individual fatty acids: Implications for authentication

The fatty acids of olive oils of distinct quality grade from the most important European Union (EU) producer countries were chemically and isotopically characterized. The analytical approach utilized combined capillary column gas chromatography-mass spectrometry (GC/MS) and the novel technique of compound-specific isotope analysis (CSIA) through gas chromatography coupled to a stable isotope ratio mass spectrometer (IRMS) via a combustion (C) interface (GC/C/IRMS). This approach provides further insights into the control of the purity and geographical origin of oils sold as cold-pressed extra virgin olive oil with certified origin appellation. The results indicate that substantial enrichment in heavy carbon isotope (C-13) of the bulk oil and of individual fatty acids are related to (1) a thermally induced degradation due to deodorization or steam washing of the olive oils and (2) the potential blend with refined olive oil or other vegetable oils. The interpretation of the data is based on principal component analysis of the fatty acids concentrations and isotopic data (delta(13)C(oil), delta(13)C(16:0), delta(13)C(18:1)) and on the delta(13)C(16:0) vs delta(13)C(18:1) covariations. The differences in the delta(13)C values of palmitic and oleic acids are discussed in terms of biosynthesis of these acids in the plant tissue and admixture of distinct oils.

Costs of reusable and disposable aprons in a public teaching hospital

Objective To analyze the direct cost of reusable and disposable aprons in a public teaching hospital. Method Cross-sectional study of quantitative approach, focusing on the direct cost of reusable and disposable aprons at a teaching hospital in northern Paraná. The study population consisted of secondary data collected in reports of the cost of services, laundry, materials and supplies division of the institution for the year 2012 Results We identified a lower average cost of using disposable apron when compared to the reusable apron. The direct cost of reusable apron was R$ 3.06, and the steps of preparation and washing were mainly responsible for the high cost, and disposable apron cost was R$ 0.94. Conclusion The results presented are important for hospital managers properly allocate resources and manage costs in hospitals
.

Artrópodos associados à copa de Attalea phalerata Mart. (Arecaceae), na região do Pantanal de Poconé, Mato Grosso, Brasil

Six individuals of the palm A. phalerata, in Poconé floodplains of Mato Grosso, were sprayed with a synthetic pyrethroid (0.25% concentration) in order to study the biomass, diversity, and richness of the canopy arthropods. A total of 17,188 (238.7±80.6 ind./m²) arthropods belonging to 22 Orders, was collected in a 72 m² funnel area. Two hours after spraying, 58.9% of the total number fell into the funnels, 37.6% was obtained by shaking the trees, and finally, 3.5% after cutting and washing all the palm leaves. The Coleoptera (27.4%), Hymenoptera-Formicidae (19.0%), Collembola (13.6%), Psocoptera (10.7%), Diptera (9.0%) and Araneae (6.4%) were the predominant. The total biomass was 15.1 g dry weight (0.4mg/m²; 0.13+0.04/tree). A total of 4,715 beetles representing 48 families and 326 morphospecies were obtained. Tenebrionidae (22.9%), Curculionidae (22.0%), Carabidae (10.9%) and Staphylinidae (7.9%) were the most abundant, while Curculionidae (44 spp.), Staphylinidae (40 spp.) and Chrysomelidae (34 spp.) presented the largest number of morphospecies. Herbivores (37.5%) were the dominant in the trophic guilds of adult Coleoptera, followed by predators (35.4%), fungivores (14.6%), and saprophages (12.5%). Although most arthropod Orders were represented in all the palms sampled, analysis of variance showed no significant differences in their composition, however there was a significant difference in their frequency of occurrence.

Isolating DNA from sexual assault cases: a comparison of standard methods with a nuclease-based approach.

AbstractText BACKGROUND: Profiling sperm DNA present on vaginal swabs taken from rape victims often contributes to identifying and incarcerating rapists. Large amounts of the victim's epithelial cells contaminate the sperm present on swabs, however, and complicate this process. The standard method for obtaining relatively pure sperm DNA from a vaginal swab is to digest the epithelial cells with Proteinase K in order to solubilize the victim's DNA, and to then physically separate the soluble DNA from the intact sperm by pelleting the sperm, removing the victim's fraction, and repeatedly washing the sperm pellet. An alternative approach that does not require washing steps is to digest with Proteinase K, pellet the sperm, remove the victim's fraction, and then digest the residual victim's DNA with a nuclease. METHODS: The nuclease approach has been commercialized in a product, the Erase Sperm Isolation Kit (PTC Labs, Columbia, MO, USA), and five crime laboratories have tested it on semen-spiked female buccal swabs in a direct comparison with their standard methods. Comparisons have also been performed on timed post-coital vaginal swabs and evidence collected from sexual assault cases. RESULTS: For the semen-spiked buccal swabs, Erase outperformed the standard methods in all five laboratories and in most cases was able to provide a clean male profile from buccal swabs spiked with only 1,500 sperm. The vaginal swabs taken after consensual sex and the evidence collected from rape victims showed a similar pattern of Erase providing superior profiles. CONCLUSIONS: In all samples tested, STR profiles of the male DNA fractions obtained with Erase were as good as or better than those obtained using the standard methods.