987 resultados para process interface
Resumo:
We present the study of the geochemical processes associated with the first successful remediation of a marine shore tailings deposit in a coastal desert environment (Bahia de Ite, in the Atacama Desert of Peru). The remediation approach implemented a wetland on top of the oxidized tailings. The site is characterized by a high hydrauliz gradient produced by agricultural irrigation on upstream gravel terraces that pushed river water (similar to 500 mg/L SO(4)) toward the sea and through the tailings deposit. The geochemical and isotopic (delta(2)H(water) and delta(18)O(water), delta(34)S(sulfate) , delta(18)O(sulfate)) approach applied here revealed that evaporite horizons (anhydrite and halite) in the gravel terraces are the source of increased concentrations of SO(4), Cl, and Na up to similar to 1500 mg/L in the springs at the base of the gravel terraces. Deeper groundwater interacting with underlying marine sequences increased the concentrations of SO(4), Cl, and Na up to 6000 mg/L and increased the alkalinity up to 923 mg/L CaCO(3) eq. in the coastal aquifer. These waters infiltrated into the tailings deposit at the shelf-tailings interface. Nonremediated tailings had a low-pH oxidation zone (pH 1-4) with significant accumulations of efflorescent salts (10-20 cm thick) at the surface because of upward capillary transport of metal cations in the arid climate. Remediated tailings were characterized by neutral pH and reducing conditions (pH similar to 7, Eh similar to 100 mV). As a result, most bivalent metals such as Cu, Zn, and Ni had very low concentrations (around 0.01 mg/L or below detection limit) because of reduction and sorption processes. In contrast, these reducing conditions increased the mobility of iron from two sources in this system: (1) The originally Fe(III)-rich oxidation zone, where Fe(II) was reduced during the remediation process and formed an Fe(II) plume, and (2) reductive dissolution of Fe(III) oxides present in the original shelf lithology formed an Fe-Mn plume at 10-m depth. These two Fe-rich plumes were pushed toward the shoreline where more oxidizing and higher pH conditions triggered the precipitation of Fe(HI)hydroxide coatings on silicates. These coatings acted as a filter for the arsenic, which naturally infiltrated with the river water (similar to 500 mu g/L As natural background) into the tailings deposit.
Resumo:
This research was based on a study of social enterprises in Brazil, to find out if and how these organizations plan and manage the succession process for their senior positions. The study investigated the subset of the associations dedicated to collectively producing goods and services, because they are formally set up and aimed at speeding up the dynamism of local development. The empirical research consisted of two stages. The first was a survey covering a sample of 378 organizations, to find out which of those had already undergone or were undergoing a succession process. The second interviewed the main manager of 32 organizations, to obtain a description of their succession experience. In this stage, the research aimed to analyze how the Individual, Organization and Environment dimensions interact to configure the succession process, identifying which factors of each of these dimensions can facilitate or limit this process. The following guiding elements were taken as the analytical basis: Individual dimension - leadership roles, skill and styles; Organization dimension - structure, planning, advisory boards, communication (transparency), control and evaluation; and Environment dimension - influence of the stakeholders (community, suppliers, clients, and business partners) on the succession process. The results indicated that succession in the researched associations is in the construction stage: it adapts to the requirements of current circumstances but is evidently in need of improvement in order for more effective planning and shared management of the process to be achieved.
Resumo:
Based on the variables relationship and knowledge, this article aimed at analyzing how a multinational enterprise selects an entry mode to operate in a particular international market and how this initial choice evolves over time. We devised a rather new theoretical framework to address it by combining three theoretical approaches that have dealt with the firm internationalization: the Uppsala model, the relational approach, and the subsidiary development literature. We constructed a qualitative backward-looking longitudinal case study of the internationalization process of a North-American multinational enterprise in the Brazilian market. Results show that four types of relationships and three types of knowledge played the role in the events that characterized the internationalization of this firm. Based on these results, five new hypotheses concerning the interplay between relationships and knowledge in the internationalization process of the firm are suggested for future empirical tests.
Resumo:
ABSTRACT A phenomenon closely linked to changes in social, economic, and cultural context is growing and growing as the years go by and attracting the attention of researchers for the development of studies involving both the individual and the organizational field. Named as "dual career family", this phenomenon emphasizes a joint move from a husband and wife (a couple) in the family sphere and in the development of both careers. Thus, in order to know how these relationships are being established, this study set out to investigate what are the determining factors that compose the dual career phenomenon in the Brazilian context. The research involved 340 participants, all former students of a public university, married or living in a marital status. The results allowed to feature, through descriptive statistics, the profile of dual career couples in the Brazilian scene and check what are the types of dual career in the country. We obtained five types of dual career: coordinated familistic, conventional familistic, coordinated careerist, conventional careerist and acrobat.
Resumo:
Stone groundwood (SGW) is a fibrous matter commonly prepared in a high yield process, and mainly used for papermaking applications. In this work, the use of SGW fibers is explored as reinforcing element of polypropylene (PP) composites. Due to its chemical and superficial features, the use of coupling agents is needed for a good adhesion and stress transfer across the fiber-matrix interface. The intrinsic strength of the reinforcement is a key parameter to predict the mechanical properties of the composite and to perform an interface analysis. The main objective of the present work was the determination of the intrinsic tensile strength of stone groundwood fibers. Coupled and non-coupled PP composites from stone groundwood fibers were prepared. The influence of the surface morphology and the quality at interface on the final properties of the composite was analyzed and compared to that of fiberglass PP composites. The intrinsic tensile properties of stone groundwood fibers, as well as the fiber orientation factor and the interfacial shear strength of the current composites were determined
The quality of the diagnostic process of urinary tract infections: from the indication to the result
Resumo:
Trata-se de estudo de intenção epistemológica acerca da teoria do alcance de metas de King e suas contribuições para o conhecimento e prática de enfermeiros que atuam no Programa "Saúde da Família" (PSF), Brasil. Aplicou-se o componente Análise, do Método de Análise de Teorias de Meleis na reflexão crítica sobre a teoria, e tomou-se de leituras e reflexões quanto às diretrizes e propostas do PSF para perceber a interface entre os dois paradigmas em estudo. Identificou-se haver coerência entre as duas propostas de abordagem, o que leva as autoras a recomendarem a adoção dos ensinamentos de King na prática do PSF, no sentido da enfermagem obter maiores e melhores resultados de suas ações.
Resumo:
This paper introduces how artificial intelligence technologies can be integrated into a known computer aided control system design (CACSD) framework, Matlab/Simulink, using an object oriented approach. The aim is to build a framework to aid supervisory systems analysis, design and implementation. The idea is to take advantage of an existing CACSD framework, Matlab/Simulink, so that engineers can proceed: first to design a control system, and then to design a straightforward supervisory system of the control system in the same framework. Thus, expert systems and qualitative reasoning tools are incorporated into this popular CACSD framework to develop a computer aided supervisory system design (CASSD) framework. Object-variables an introduced into Matlab/Simulink for sharing information between tools