The Bonenblust-Hille inequality for homogeneous polynomials is hypercontractive

The Bohnenblust-Hille inequality says that the $\ell^{\frac{2m}{m+1}}$ -norm of the coefficients of an $m$-homogeneous polynomial $P$ on $\Bbb{C}^n$ is bounded by $\| P \|_\infty$ times a constant independent of $n$, where $\|\cdot \|_\infty$ denotes the supremum norm on the polydisc $\mathbb{D}^n$. The main result of this paper is that this inequality is hypercontractive, i.e., the constant can be taken to be $C^m$ for some $C>1$. Combining this improved version of the Bohnenblust-Hille inequality with other results, we obtain the following: The Bohr radius for the polydisc $\mathbb{D}^n$ behaves asymptotically as $\sqrt{(\log n)/n}$ modulo a factor bounded away from 0 and infinity, and the Sidon constant for the set of frequencies $\bigl\{ \log n: n \text{a positive integer} \le N\bigr\}$ is $\sqrt{N}\exp\{(-1/\sqrt{2}+o(1))\sqrt{\log N\log\log N}\}$.

La formació permanent del professorat: la proposta del Ministeri d'Educació i Ciència

L'abril de 1989 el Ministeri d'Educació i Ciencia va presentar a la comunitat educativa un Pla de Formació del Professorat per sis anys que passo a descriure breument. El document pretén ser un marc d'actuació; alhora, descriu el context social i educatiu sobre el qual s'elabora el Pla, del qual deriva un nou perfil del professorat. Així mateix, estableix el que s'anomena «model de formació permanent', que comentaré més endavant. En aquest apartat s'enuncien les concepcions, principis basics i directrius que orienten I'execució del Pla, coherents amb el contingut i les característiques de I'actual reforma del sistema educatiu. Segueix en el document una definició de les estructures de formació, amb un desplegament especial de I'apartat corresponent als centres de professors. A I'apartat «Pla d'Actuació' s'estableixen les finalitats i objectius del PI a, i així mateix les línies d'actuació mitjanyant les quals es pretén atenyer els objectius proposats. Tot seguit s'estableixen els criteris d'avaluació previstos tant per als programes com per al conjunt del Pla. Finalment, es fa una valoració aproximada del cost económic que, tal com s'indica, s'haura d'anar concretant als diferents plans anuals. A continuació, en vint-i-nou annexos, es descriuen les línies generals dels programes que hauran de fer realitat els objectius i els fins que ens proposem.

Screening for cardiovascular disease risk and subsequent management in low and middle income countries : challenges and opportunities

Background: Cardiovascular disease (CVD), mainly heart attack and stroke, is the leading cause of premature mortality in low and middle income countries (LMICs). Identifying and managing individuals at high risk of CVD is an important strategy to prevent and control CVD, in addition to multisectoral population-based interventions to reduce CVD risk factors in the entire population. Methods: We describe key public health considerations in identifying and managing individuals at high risk of CVD in LMICs. Results: A main objective of any strategy to identify individuals at high CVD risk is to maximize the number of CVD events averted while minimizing the numbers of individuals needing treatment. Scores estimating the total risk of CVD (e.g. ten-year risk of fatal and non-fatal CVD) are available for LMICs, and are based on the main CVD risk factors (history of CVD, age, sex, tobacco use, blood pressure, blood cholesterol and diabetes status). Opportunistic screening of CVD risk factors enables identification of persons with high CVD risk, but this strategy can be widely applied in low resource settings only if cost effective interventions are used (e.g. the WHO Package of Essential NCD interventions for primary health care in low resource settings package) and if treatment (generally for years) can be sustained, including continued availability of affordable medications and funding mechanisms that allow people to purchase medications without impoverishing them (e.g. universal access to health care). This also emphasises the need to re-orient health systems in LMICs towards chronic diseases management.

Social insurances system's shortcomings : the example of the low-income young retirees' access to healthcare [Imperfections du système d'assurances sociales : l'exemple de l'accès aux soins des jeunes retraité(e)s à revenu modeste]

This article presents the results of a study involving 2445 recently retired persons from the Canton of Vaud in Switzerland who choose to forego health care. These persons of modest means barely qualify for government assistance programs and do not benefit from the social safety net that is provided to the truly destitute. 17.9% of the respondents to the questionnaire said that they forego health care for financial reasons. Interviews reveal the complex reasons that lie behind such a choice, as well as the compensation strategies that are sometimes used to get medical treatment. These strategies show that the people are able to act when the circumstances require them to do so. Despite that, their situation remains insecure. Cet article analyse les résultats d'une étude sur le renoncement aux soins menée auprès de 2445 Vaudois∙e∙s récemment retraité∙e∙s. Ces personnes de situation modeste sont proches des limites d'accès aux aides étatiques et ne bénéficient pas du même filet de protection sociale que d'autres plus démunies. 17.9% des répondant∙e∙s au questionnaire déclarent renoncer à des soins pour raisons financières. Des entretiens mettent en évidence la complexité du renoncement, ainsi que les stratégies compensatoires que les personnes adoptent pour accéder à certains soins. Ces dernières démontrent une capacité d'agir en situation qui reste toutefois précaire.

Attitudes and burden in relatives of patients with schizophrenia in a middle income country

BACKGROUND: Most studies of family attitudes and burden have been conducted in developed countries. Thus it is important to test the generalizability of this research in other contexts where social conditions and extended family involvement may be different. The aim of this study was to assess the relationship between the attitudes of caregivers and the burden they experience in such a context, namely Arica, a town located in the northernmost region of Chile, close to the border with Peru and Bolivia. METHODS: We assessed attitudes towards schizophrenia (including affective, cognitive and behavioural components) and burden (including subjective distress, rejection and competence) in 41 main caregivers of patients with schizophrenia, all of whom were users of Public Mental Health Services in Arica. RESULTS: Attitude measures differed significantly according to socio-demographic variables, with parents (mainly mothers) exhibiting a more negative attitude towards the environment than the rest of the family (t = 4.04; p = 0.000).This was also the case for caregivers with a low educational level (t = 3.27; p < 0.003), for the oldest caregivers (r = 0.546; p = 0.000) and for those who had spent more time with the patient (r = 0.377; p = 0.015). Although attitudes had significant association with burden, their explanatory power was modest (R2 = .104, F = 4,55; p = .039). CONCLUSIONS: Similar to finding developed countries, the current study revealed a positive and significant relationship between the attitudes of caregivers and their burden. These findings emphasize the need to support the families of patients with schizophrenia in this social context.

Cost-effectiveness of Tenofovir / Emtricitabine / Efavirenz versus Zidovudine / Lamivudine / Efavirenz as fist-line regimens for the treatment of HIV-infected patients in low-income settings

The Highly Active Antiretroviral Therapy (HAART) is the combination of at least three antiretroviral compounds. The combination purpose is to reduce the likelihood of drug resistance. However in the long-term the resistance to the first-line combination occurs and leads to treatment failure. Thus, a second-line and even a third-line regimen are recommended in the long run. [...] [P. 5] The two treatment alternatives under comparison: Tenofovir (300 mg) CO-formulated with Emtricitabine (200 mg) and Efavirenz (600 mg) currently known under the brand name Atripla (R) was introduced in July 2006 in the United States market. The excellent safety profile and ease of use make this combination a perfect first-line regimen in low-income settings. Therefore, this treatment option was recommended in WHO 2006 reviewed guidelines. Unfortunately, Tenofovir and Emtricitabine compounds are still costly and not yet widely available. For a matter of simplification this regimen is referred in this report as "the recent" therapy. Initially, we had in mind to consider the most frequently used first-line regimen in low-income countries (Stavudine / Larnivudme / Nevirapine) as a comparator for this economic evaluation. Unfortunately, according to the literature review results (see Annex 3); there was no data available comparing head to head the effectiveness of this regimen with the recent one. Instead, we selected a less frequently but commonly used first-line regimen in low-income countries as a comparator: Zidovudine, Lamivudine, Efavirenz. This combination has extensive experience in durability, safety and toxicity and seems to be an optimal choice for a first-line regimen according to the clinical trial group 384 team. Furthermore, Zidovudine, one of the compounds of this combination is now recommended as one of the preferred NNRTI [Non Nucleoside Reverse Transcriptase Inhibitors] options to be considered by countries instead of Stavudine (the most used NNRTI in limited-income countries). As this combination has been included in the WHO guidelines as a first-line therapy since 2003 when WHO launched the "3 by 5" scaling-up initiative, this combination of drugs is referred in this report as the "old" therapy. Objectives: The primary objective of this economic evaluation is to compare the two first-line HAARTs introduced above, in a low-income setting context. Both of these combinations are recommended by the 2006 WHO guidelines as potential first-line regimens. The secondary objective is to provide a simplified and comprehensible cost-effectiveness modeling tool in order to help policy makers, in resource-limited settings, make decisions about which first-line HAART to fund using the scarce resources available. [P. 6-7]

Ideal Body Size as a Mediator for the Gender-Specific Association Between Socioeconomic Status and Body Mass Index: Evidence From an Upper-Middle-Income Country in the African Region.

While obesity continues to rise globally, the associations between body size, gender, and socioeconomic status (SES) seem to vary in different populations, and little is known on the contribution of perceived ideal body size in the social disparity of obesity in African countries. We examined the gender and socioeconomic patterns of body mass index (BMI) and perceived ideal body size in the Seychelles, a middle-income small island state in the African region. We also assessed the potential role of perceived ideal body size as a mediator for the gender-specific association between SES and BMI. A population-based survey of 1,240 adults aged 25 to 64 years conducted in December 2013. Participants' BMI was calculated based on measured weight and height; ideal body size was assessed using a nine-silhouette instrument. Three SES indicators were considered: income, education, and occupation. BMI and perceived ideal body size were both higher among men of higher versus lower SES (p< .001) but lower among women of higher versus lower SES (p< .001), irrespective of the SES indicator used. Multivariate analysis showed a strong and direct association between perceived ideal body size and BMI in both men and women (p< .001) and was consistent with a potential mediating role of perceived ideal body size in the gender-specific associations between SES and BMI. Our study emphasizes the importance of gender and socioeconomic differences in BMI and ideal body size and suggests that public health interventions that promote perception of healthy weight could help mitigate SES-related disparities in BMI.

La formació permanent del professorat d'educació infantil. Elements de reflexió

Las características específicas del colectivo de profesionales de la etapa de Educación infantil proyectan una dinámica muy activa que genera nuevas metodologías, estrategias y recursos para una intervención educativa de calidad, en una etapa de vital importancia para el correcto desarrollo infantil. Estas características han de tenerse en cuenta en la formación de formadores del profesorado de esta etapa educativa, para favorecer su desarrollo profesional. Son necesarios proyectos de formación alternativos que conecten los «ámbitos de educación» a partir de propuestas integradas: escuela, familia, instituciones locales y asociaciones. Conjuntamente han de elaborar modelos desinteresados y democráticos, capaces de canalizar la interacción y la reciprocidad entre la cultura de la escuela y la cultura externa a ella.

Literature review on permanent magnet generators design and dynamic behavior

This paper is a literature review which describes the construction of state of the art of permanent magnet generators and motors constructing and discusses the current and possible application of these machines in industry. Permanent magnet machines are a well-know class of rotating and linear electric machines used for many years in industrial applications. A particular interest for permanent magnet generators is connected with wind mills, which seem to be becoming increasingly popular nowadays. Geared and direct-driven permanent magnet generators are described. A classification of direct-driven permanent magnet generators is given. Design aspects of permanent magnet generators are presented. Permanent magnet generators for wind turbines designs are highlighted. Dynamics and vibration problems of permanent magnet generators covered in literature are presented. The application of the Finite Element Method for mechanical problems solution in the field of permanent magnet generators is discussed.

Eddy-current losses in rotor surface mounted permanent magnets

The aim of the work is to study the existing analytical calculation procedures found in literature to calculate the eddy-current losses in surface mounted permanent magnets within PMSM application. The most promising algorithms are implemented with MATLAB software under the dimensional data of LUT prototype machine. In addition finite elements analyze, utilized with help of Flux 2D software from Cedrat Ltd, is applied to calculate the eddy-current losses in permanent magnets. The results obtained from analytical methods are compared with numerical results.

Control of permanent magnet linear synchronous motor in motion control applications

The aim of the thesis is to study the principles of the permanent magnet linear synchronous motor (PMLSM) and to develop a simulator model of direct force controlled PMLSM. The basic motor model is described by the traditional two-axis equations. The end effects, cogging force and friction model are also included into the final motor model. Direct thrust force control of PMLSM is described and modelled. The full system model is proven by comparison with the data provided by the motor manufacturer.

Assembly Methods of Permanent Magnets for Synchronous Generators

This thesis examines and explains the procedure used to redesign the attachment of permanent magnets to the surface of the rotor of a synchronous generator. The methodology followed to go from the actual assembly to converge to the final purposed innovation was based on the systematic approach design. This meant that first a series of steps had to be predefined as a frame of reference later to be used to compare and select proposals, and finally to obtain the innovation that was sought. Firstly, a series of patents was used as the background for the upcoming ideas. To this end, several different patented assemblies had been found and categorized according the main element onto which this thesis if focused, meaning the attachment element or method. After establishing the technological frame of reference, a brainstorm was performed to obtain as many ideas as possible. Then these ideas were classified, regardless of their degree of complexity or usability, since at this time the quantity of the ideas was the important issue. Subsequently, they were compared and evaluated from different points of view. The comparison and evaluation in this case was based on the use of a requirement list, which established the main needs that the design had to fulfill. Then the selection could be done by grading each idea in accordance with these requirements. In this way, one was able to obtain the idea or ideas that best fulfilled these requirements. Once all of the ideas were compared and evaluated, the best or most suitable idea or ideas were separated. Finally, the selected idea or ideas was/were analyzed in extension and a number of improvements were made. Consequently, a final idea was refined and made more suitable at its performance, manufacture, and life cycle assessment. Therefore, in the end, the design process gave a solution to the problem pointed out at the beginning.

New design of the frame for a permanent magnet generator

This thesis introduces a search for a new design of the frame for a permanent magnet generator mounted at a windmill. The objective of this work is to offer new design ideas for the stator frame - new concepts for connecting stator core to stator frame in a generator. Desired aims of new design concepts are: simplification of the structure production; decrease of material use; use of standard components; light weight of construction and etc. Thesis contains several new possible designs for the stator frame structure. Also, it has a list of possible connection concepts, which can be used to join the stator to the frame. All new ideas are described and compared according to its match to the desired purposes of the work. New design concepts are modeled using modern software. The main part of the Thesis contains several approximate computer models of the current and new offered constructions, description of loads and stress in the current stator frame. It has evaluation of the most important stress and load characteristics. The final design is a result of all previous research. It has a description of a new frame structure and joining concept for it. This structure matched main aims of work, but it does not have detailed design with dimensions and check calculations of the frame and welds. Thesis gives representation about design search, evaluation and comparison of new concepts of generator structure. Also, it gives general representation of renewable energy technology, knowledge about windmill turbines and its contents.

Empirics of the international inequality in CO2 emissions intensity: explanatory factors according to complementary decomposition methodologies

This paper analyses the international inequalities in CO2 emissions intensity for the period 1971- 2009 and assesses explanatory factors. Multiplicative, group and additive methodologies of inequality decomposition are employed. The first allows us to clarify the separated role of the carbonisation index and the energy intensity in the pattern observed for inequalities in CO2 intensities; the second allows us to understand the role of regional groups; and the third allows us to investigate the role of different fossil energy sources (coal, oil and gas). The results show that, first, the reduction in global emissions intensity has coincided with a significant reduction in international inequality. Second, the bulk of this inequality and its reduction are attributed to differences between the groups of countries considered. Third, coal is the main energy source explaining these inequalities, although the growth in the relative contribution of gas is also remarkable. Fourth, the bulk of inequalities between countries and its decline are explained by differences in energy intensities, although there are significant differences in the patterns demonstrated by different groups of countries.

The causal factors of international inequality in CO2 emissions per capita: a regression-based inequality decomposition analysis

This paper uses the possibilities provided by the regression-based inequality decomposition (Fields, 2003) to explore the contribution of different explanatory factors to international inequality in CO2 emissions per capita. In contrast to previous emissions inequality decompositions, which were based on identity relationships (Duro and Padilla, 2006), this methodology does not impose any a priori specific relationship. Thus, it allows an assessment of the contribution to inequality of different relevant variables. In short, the paper appraises the relative contributions of affluence, sectoral composition, demographic factors and climate. The analysis is applied to selected years of the period 1993–2007. The results show the important (though decreasing) share of the contribution of demographic factors, as well as a significant contribution of affluence and sectoral composition.