Pricing recreation use of national parks for an efficient nature conservation : an application to the portuguese case

Current institutions, research, and legislation have not yet been sufficient to achieve the conservation level of Nature as required by the society. One of the reasons that explains this relative failure is the lack of incentives to motivate local individual and Nature users in general, to adopt behaviour compliant with Nature sustainable uses. Economists believe that, from the welfare point of view, pricing is the more efficient way to make economic actors to take more environmental friendly decisions. In this paper we will discuss how efficient can be the act of pricing the recreation use of a specific natural area, in terms of maximising welfare. The main conservation issues for pricing recreation use, as well as the conditions under which pricing will be an efficient and fair instrument for the natural area will be outlined. We will conclude two things. Firstly that, from the rational utilitarian economic behaviour point of view, economic efficiency can only be achieved if the natural area has positive and known recreation marginal costs under the relevant range of the marshallian demand recreation curve and if price system management is not costly. Secondly, in order to guarantee equity for the different type of visitors when charging the fee, it is necessary to discuss differential price systems. We shall see that even if marginal recreation costs exist but are unknown, pricing recreation is still an equity instrument and a useful one from the conservation perspective, as we shall demonstrate through an empirical application to the Portuguese National Park. An individual Travel Cost Method Approach will be used to estimate the recreation price that will be set equal to the visitor’s marginal willingness to pay for a day of visit in the national park. Although not efficient, under certain conditions this can be considered a fair pricing practice, because some of the negative recreation externalities will be internalised. We shall discuss the conditions that guarantee equity on charging for the Portuguese case.

Long-term Success of Family Firms: Investigating Specific Aspects of Firm-level Entrepreneurship and Individual-level Antecedents

Long-term success of family firms is of utmost social and economic importance. Three of its determinants are in the center of this Dissertation: firmlevel entrepreneurial orientation (EO), managers' entrepreneurial behavior, and value-creating attitudes of non-family employees. Each determinant and respective research gaps are addressed by one paper of this cumulative dissertation. Referring to firm-level EO, scholars claim that EO is a main antecedent to firms' both short- and long-term success. However, family firms seem to be successful across generations despite rather low levels of EO. The first paper addresses this paradox by investigating EO patterns of long-lived family firms in three Swiss case studies. The main finding is that the key to success is not to be as entrepreneurially as possible all the time, but to continuously adapt the EO profile depending on internal and external factors. Moreover, the paper suggest new subcategories to different EO dimensions. With regard to entrepreneurial behavior of managers, there is a lack of knowledge how individual-level and organizational level factors affect its evolvement. The second paper addresses this gap by investigating a sample of 403 middle-level managers from both family and non-family firms. It introduces psychological ownership of managers as individual-level antecedent and investigates the interaction with organizational factors. As a central insight, management support is found to strengthen the psychological ownership-entrepreneurial behavior relationship. The third paper is based on the fact that employees' justice perceptions are established antecedents of value-creating employee attitudes such as affective commitment and job satisfaction. Even though family firms are susceptible to nonfamily employees´ perceptions of injustice, corresponding research is scarce. Moreover, the mechanism connecting justice perceptions and positive outcomes is still unclear. Addressing these gaps, the analysis of a sample of 310 non-family employees reveals that psychological ownership is a mediator in the relationships between distributive justice perceptions and both affective commitment and job satisfaction. Altogether, the three papers offer valuable contributions to family business literature with respect to EO, entrepreneurial behavior, and value-creating employee attitudes. Thus, they increase current understanding about important determinants of family firms' long-term success, while opening up numerous ways of future research.

Information security value in e-entrepreneurship

This paper researches the information security value in e-entrepreneurship by revising the literature that establishes the entrepreneurial domain and by relating it with the development of technological resources that create value for the customer in an online business. It details multiple paradigms regarding consumer’s values of information security, while relating them with common practices and previous researches in technological entrepreneurship. This research presents and discusses the benefits of information security standards in e-entrepreneurship. It details and discusses the ISO 27001 and PCI-DSS information security standards that can be used to differentiate security initiatives to achieve competitive advantage, while preserving information leadership as a critical resource for online business success. Based on the literature review, a theoretical research model is presented and research hypotheses are discussed. This model believes that information security affects information leadership and that information leadership, as a unique resource in e-business, contributes to e-entrepreneurship success. The adoption of information security standards affects customer’s trust in e-business, which also benefits e-entrepreneurial strategy.

Obstacle courses… nature, recreation, and health abstract

Obstacle courses are an activity that brings a group of people together, in which teams are organized to navigate an established route during a set period of time, completing tasks (clues, riddles, or challenges) to meet a defined goal.  Rules and safety norms are explained to all participants; however, they are not informed of the location of the clues, riddles, or challenges.  The following should be considered when organizing an obstacle course: objective, topic to be developed, location, materials needed, clues, riddles or challenges that may be included, and how to supervise that all teams pass the checkpoints.  Like any other activity with a touch of competitiveness, fair play and respect should be above any interest.  If, for any reason, any of the teams has an emergency, solidarity should prevail, and the activity can be used to teach values.  An adventurous spirit is also essential in this activity.  The desire for the unknown and the new challenges individuals and groups.  This activity helps groups of friends, children, adults, families, etc. share a nice and healthy day together in contact with nature, rescuing concepts such as cooperation, cleverness and, particularly, team work.

REALIZATION OF A DC MICROGRID USING A HAMILTONIAN BASED CONTROLS SOLUTION

Future power grids are envisioned to be serviced by heterogeneous arrangements of renewable energy sources. Due to their stochastic nature, energy storage distribution and management are pivotal in realizing microgrids serviced heavily by renewable energy assets. Identifying the required response characteristics to meet the operational requirements of a power grid are of great importance and must be illuminated in order to discern optimal hardware topologies. Hamiltonian Surface Shaping and Power Flow Control (HSSPFC) presents the tools to identify such characteristics. By using energy storage as actuation within the closed loop controller, the response requirements may be identified while providing a decoupled controller solution. A DC microgrid servicing a fixed RC load through source and bus level storage managed by HSSPFC was realized in hardware. A procedure was developed to calibrate the DC microgrid architecture of this work to the reduced order model used by the HSSPFC law. Storage requirements were examined through simulation and experimental testing. Bandwidth contributions between feed forward and PI components of the HSSPFC law are illuminated and suggest the need for well-known system losses to prevent the need for additional overhead in storage allocations. The following work outlines the steps taken in realizing a DC microgrid and presents design considerations for system calibration and storage requirements per the closed loop controls for future DC microgrids.

The Nature of Microvariability in Blazar 0716+714

We organized an international campaign to observe the blazar 0716+714 in the optical band. The observations took place from February 24, 2009 to February 26, 2009. The global campaign was carried out by observers from more that sixteen countries and resulted in an extended light curve nearly seventy-eight hours long. The analysis and the modeling of this light curve form the main work of this dissertation project. In the first part of this work, we present the time series and noise analyses of the data. The time series analysis utilizes discrete Fourier transform and wavelet analysis routines to search for periods in the light curve. We then present results of the noise analysis which is based on the idea that each microvariability curve is the realization of the same underlying stochastic noise processes in the blazar jet. Neither reoccuring periods nor random noise can successfully explain the observed optical fluctuations. Hence in the second part, we propose and develop a new model to account for the microvariability we see in blazar 0716+714. We propose that the microvariability is due to the emission from turbulent regions in the jet that are energized by the passage of relativistic shocks. Emission from each turbulent cell forms a pulse of emission, and when convolved with other pulses, yields the observed light curve. We use the model to obtain estimates of the physical parameters of the emission regions in the jet.

Tin Oxide Based Composites Derived Using Electrostatic Spray Deposition Technique as Anodes for Li-Ion Batteries

Recent advances in the electric & hybrid electric vehicles and rapid developments in the electronic devices have increased the demand for high power and high energy density lithium ion batteries. Graphite (theoretical specific capacity: 372 mAh/g) used in commercial anodes cannot meet these demands. Amorphous SnO2 anodes (theoretical specific capacity: 781 mAh/g) have been proposed as alternative anode materials. But these materials have poor conductivity, undergo a large volume change during charging and discharging, large irreversible capacity loss leading to poor cycle performances. To solve the issues related to SnO2 anodes, we propose to synthesize porous SnO2 composites using electrostatic spray deposition technique. First, porous SnO2/CNT composites were fabricated and the effects of the deposition temperature (200,250, 300 oC) & CNT content (10, 20, 30, 40 wt %) on the electrochemical performance of the anodes were studied. Compared to pure SnO2 and pure CNT, the composite materials as anodes showed better discharge capacity and cyclability. 30 wt% CNT content and 250 oC deposition temperature were found to be the optimal conditions with regard to energy capacity whereas the sample with 20% CNT deposited at 250 oC exhibited good capacity retention. This can be ascribed to the porous nature of the anodes and the improvement in the conductivity by the addition of CNT. Electrochemical impedance spectroscopy studies were carried out to study in detail the change in the surface film resistance with cycling. By fitting EIS data to an equivalent circuit model, the values of the circuit components, which represent surface film resistance, were obtained. The higher the CNT content in the composite, lower the change in surface film resistance at certain voltage upon cycling. The surface resistance increased with the depth of discharge and decreased slightly at fully lithiated state. Graphene was also added to improve the performance of pure SnO2 anodes. The composites heated at 280 oC showed better energy capacity and energy density. The specific capacities of as deposited and post heat-treated samples were 534 and 737 mAh/g after 70 cycles. At the 70th cycle, the energy density of the composites at 195 °C and 280 °C were 1240 and 1760 Wh/kg, respectively, which are much higher than the commercially used graphite electrodes (37.2-74.4 Wh/kg). Both SnO2/CNTand SnO2/grapheme based composites with improved energy densities and capacities than pure SnO2 can make a significant impact on the development of new batteries for electric vehicles and portable electronics applications.

Fuel level sensor based on polymer optical fiber Bragg gratings for aircraft applications

Safety in civil aviation is increasingly important due to the increase in flight routes and their more challenging nature. Like other important systems in aircraft, fuel level monitoring is always a technical challenge. The most frequently used level sensors in aircraft fuel systems are based on capacitive, ultrasonic and electric techniques, however they suffer from intrinsic safety concerns in explosive environments combined with issues relating to reliability and maintainability. In the last few years, optical fiber liquid level sensors (OFLLSs) have been reported to be safe and reliable and present many advantages for aircraft fuel measurement. Different OFLLSs have been developed, such as the pressure type, float type, optical radar type, TIR type and side-leaking type. Amongst these, many types of OFLLSs based on fiber gratings have been demonstrated. However, these sensors have not been commercialized because they exhibit some drawbacks: low sensitivity, limited range, long-term instability, or limited resolution. In addition, any sensors that involve direct interaction of the optical field with the fuel (either by launching light into the fuel tank or via the evanescent field of a fiber-guided mode) must be able to cope with the potential build up of contamination-often bacterial-on the optical surface. In this paper, a fuel level sensor based on microstructured polymer optical fiber Bragg gratings (mPOFBGs), including poly (methyl methacrylate) (PMMA) and TOPAS fibers, embedded in diaphragms is investigated in detail. The mPOFBGs are embedded in two different types of diaphragms and their performance is investigated with aviation fuel for the first time, in contrast to our previous works, where water was used. Our new system exhibits a high performance when compared with other previously published in the literature, making it a potentially useful tool for aircraft fuel monitoring.

Prospect theory and the effects of bankruptcy laws on entrepreneurial aspirations

We apply prospect theory to explain how personal and corporate bankruptcy laws affect risk perceptions of entrepreneurs at time of entry and therefore their growth ambitions. Previous theories have reached ambiguous conclusions as to whether countries with more debtor-friendly bankruptcy laws (i.e. laws that are more forgiving towards debtors in bankruptcy proceedings) are likely to have more entrepreneurs, or whether, creditorfriendly regimes have positive effects on new ventures via enhanced incentives for the supply of credit to entrepreneurs. Responding to this ambiguity, we apply prospect theory to propose that entrepreneurs do not attach the same significance to different elements of bankruptcy codes—and to explain which aspects of debtor-friendly bankruptcy laws matter more to entrepreneurs. Based on this, we derive and confirm hypotheses about the impact of aspects of bankruptcy codes on entrepreneurial activity using the Global Entrepreneurship Monitor combined with data on both personal and corporate bankruptcyregulations for 15 developed OECD countries. We use multilevel random coefficient logistic regressions to take account of the hierarchical nature of the data (country and individual levels). Because entrepreneurs and creditors are sensitive to different elements of the codes, there is scope for optimisation of the legal design of bankruptcy law to achieve both an adequate supply of credit and to encourage high-ambition entrepreneurship.

Agreement and clinical comparison between a new swept-source optical coherence tomography-based optical biometer and an optical low-coherence reflectometry biometer

Purpose To compare measurements taken using a swept-source optical coherence tomography-based optical biometer (IOLmaster 700) and an optical low-coherence reflectometry biometer (Lenstar 900), and to determine the clinical impacts of differences in their measurements on intraocular lens (IOL) power predictions. Methods Eighty eyes of 80 patients scheduled to undergo cataract surgery were examined with both biometers. The measurements made using each device were axial length (AL), central corneal thickness (CCT), aqueous depth (AQD), lens thickness (LT), mean keratometry (MK), white-to-white distance (WTW), and pupil diameter (PD). Holladay 2 and SRK/T formulas were used to calculate IOL power. Differences in measurement between the two biometers were determined using the paired t-test. Agreement was assessed through intraclass correlation coefficients (ICC) and Bland–Altman plots. Results Mean patient age was 76.3±6.8 years (range 59–89). Using the Lenstar, AL and PD could not be measured in 12.5 and 5.25% of eyes, respectively, while IOLMaster 700 took all measurements in all eyes. The variables CCT, AQD, LT, and MK varied significantly between the two biometers. According to ICCs, correlation between measurements made with both devices was excellent except for WTW and PD. Using the SRK/T formula, IOL power prediction based on the data from the two devices were statistically different, but differences were not clinically significant. Conclusions No clinically relevant differences were detected between the biometers in terms of their measurements and IOL power predictions. Using the IOLMaster 700, it was easier to obtain biometric measurements in eyes with less transparent ocular media or longer AL.

PROLINE-BASED CHIRAL STATIONARY PHASES: INSIGHTS INTO THE MECHANISM OF CHIRAL SELECTIVITY

Proline (Pro) is a unique amino acid that has been examined previously as a potential chiral selector for high-performance liquid chromatography. In recent years, a new class of promising Pro based enantioselective stationary phases has been studied and the longer peptides were found to be competitive with commercial chiral stationary phases (CSPs). Here, we aim to perform a comprehensive examination of a t-butoxycarbonyl- (t-Boc-) terminated monoproline selector. This selector was grafted through an amide linkage to an aminopropyl siloxane-terminated Si (111) wafer and to a silicon atomic force microscopy tip. To ensure a flat, homogeneous overlayer of selectors suitable for force spectrometric measurements, the prepared surfaces were characterized using XPS, AFM and contact angle measurements. Chemical force spectrometry (CFS) has been used to examine the chiral discrimination in our monoproline CSP by measuring the interaction forces between two D- or L-monoproline monolayers in water and in the presence of a series of amino acids in solution to explore the degree to which binding of amino acids impacts self-selectivity. Chemical force titration (CFT) has been used to observe the influence of variations in pH on the binding interaction of proline modified chiral surfaces. Here we aim to explore the connection between side-chain hydrophobicity and differences in the nature of the binding between different ionic forms of amino acids and the t-Boc-Pro interface, and thereby to gain insight into the mechanism of chiral selectivity. The CFS results show several trends for different proline selector/amino acid combinations and indicate that the binding characteristics of amino acid to the proline surface is strongly dependent on the amino acid side chain where hydrophilic side chain amino acids exhibit a selectivity opposite to that seen for those with hydrophobic side chains. The CFT studies also provide valuable insights into interactions between the proline selector and the amino acids under a wide range of pH conditions, indicating that protonated amine groups of alanine and serine are closely involved in the binding mechanism to proline surfaces. On the other hand, the presence of the second carboxylic group in aspartic acid plays an important role while interacting with proline.

Un aporte a la comprensión de las estrategias emergentes en las organizaciones a través del concepto de improvisación y la metáfora musical

Este trabajo se inscribe en uno de los grandes campos de los estudios organizacionales: la estrategia. La perspectiva clásica en este campo promovió la idea de que proyectarse hacia el futuro implica diseñar un plan (una serie de acciones deliberadas). Avances posteriores mostraron que la estrategia podía ser comprendida de otras formas. Sin embargo, la evolución del campo privilegió en alguna medida la mirada clásica estableciendo, por ejemplo, múltiples modelos para ‘formular’ una estrategia, pero dejando en segundo lugar la manera en la que esta puede ‘emerger’. El propósito de esta investigación es, entonces, aportar al actual nivel de comprensión respecto a las estrategias emergentes en las organizaciones. Para hacerlo, se consideró un concepto opuesto —aunque complementario— al de ‘planeación’ y, de hecho, muy cercano en su naturaleza a ese tipo de estrategias: la improvisación. Dado que este se ha nutrido de valiosos aportes del mundo de la música, se acudió al saber propio de este dominio, recurriendo al uso de ‘la metáfora’ como recurso teórico para entenderlo y alcanzar el objetivo propuesto. Los resultados muestran que 1) las estrategias deliberadas y las emergentes coexisten y se complementan, 2) la improvisación está siempre presente en el contexto organizacional, 3) existe una mayor intensidad de la improvisación en el ‘como’ de la estrategia que en el ‘qué’ y, en oposición a la idea convencional al respecto, 4) se requiere cierta preparación para poder improvisar de manera adecuada.

Healing wounds institutional strength, peacebuilding, and productive entrepreneurship – exploratory analysis on 23 departments of Colombia

Este estudio presenta un análisis exploratorio sobre la correlación entre la fortaleza institucional, las condiciones de paz, y el emprendimiento en una muestra de 23 departamentos en Colombia usando datos de 2014. Para llevar a cabo este objetivo se propusieron y construyeron tres índices siguiendo definiciones conceptuales seminales o estándares de evaluación internacional, a saber: 1) El Índice de Fortaleza Institucional, 2) El Índice de Construcción de Paz (construido a partir del índice de paz negativa y el índice de paz positiva) y 3) El Índice de Emprendimiento Productivo. Los resultados no muestran una correlación significativa entre todos los tres índices. Por un lado, existe una correlación significativa (p<0.05) entre los índices de fortaleza institucional y emprendimiento productivo. Por otro lado, existen correlaciones negativas no significativas entre los índices de paz positiva y fortaleza institucional, emprendimiento productivo y paz positiva y emprendimiento productivo y construcción de paz. En un segundo acercamiento, la población de los departamentos fue la variable con mayor número de correlaciones significativas (p<0.01) entre variables relacionadas con emprendimiento productivo, empleo, producto interno bruto, sofisticación industrial, innovación (patentes) y crimen. Finalmente, se discuten las conclusiones y las futuras investigaciones.

Entrepreneurship rates the fuzzy-set approach

A fuzzy-set qualitative comparative analysis is applied to determine the necessary and sufficient conditions for higher entrepreneur rates. Based on Global Entrepreneurship Monitor data, it is shown that the most relevant conditions are Media Attention to Entrepreneurship, as well as Perceived Capabilities and Perceived Opportunities. The non-existence of Fear of Failure is also an important factor in determining higher entrepreneurship rates. When the sample is split, this condition is more important for most developed countries. This can be viewed as relevant information for policymakers to better define their policies to promote entrepreneurship, which is a key to more sustainable growth in countries.

Using modeling tools for implementing feasible land use and nature conservation governance systems in small islands e The Pico Island (Azores) case-study

The present study deals with the development of systematic conservation planning as management instrument in small oceanic islands, ensuring open systems of governance, and able to integrate an informed and involved participation of the stakeholders. Marxan software was used to define management areas according a set of alternative land use scenarios considering different conservation and management paradigms. Modeled conservation zones were interpreted and compared with the existing protected areas allowing more fused information for future trade-outs and stakeholder's involvement. The results, allowing the identification of Target Management Units (TMU) based on the consideration of different development scenarios proved to be consistent with a feasible development of evaluation approaches able to support sound governance systems. Moreover, the detailed geographic identification of TMU seems to be able to support participated policies towards a more sustainable management of the entire island