Neural representations of courtship song in the Drosophila brain.

Acoustic communication in drosophilid flies is based on the production and perception of courtship songs, which facilitate mating. Despite decades of research on courtship songs and behavior in Drosophila, central auditory responses have remained uncharacterized. In this study, we report on intracellular recordings from central neurons that innervate the Drosophila antennal mechanosensory and motor center (AMMC), the first relay for auditory information in the fly brain. These neurons produce graded-potential (nonspiking) responses to sound; we compare recordings from AMMC neurons to extracellular recordings of the receptor neuron population [Johnston's organ neurons (JONs)]. We discover that, while steady-state response profiles for tonal and broadband stimuli are significantly transformed between the JON population in the antenna and AMMC neurons in the brain, transient responses to pulses present in natural stimuli (courtship song) are not. For pulse stimuli in particular, AMMC neurons simply low-pass filter the receptor population response, thus preserving low-frequency temporal features (such as the spacing of song pulses) for analysis by postsynaptic neurons. We also compare responses in two closely related Drosophila species, Drosophila melanogaster and Drosophila simulans, and find that pulse song responses are largely similar, despite differences in the spectral content of their songs. Our recordings inform how downstream circuits may read out behaviorally relevant information from central neurons in the AMMC.

Facets of prior experience and the effectiveness of inclusive design

Research in inclusive design has shown the importance of prior experience for the usability of interactive products. Prior experience, however, is an ill-defined and inconsistently used construct. A number of different definitions and operationalisations of experience exist, but the differing power of these operationalisations to predict the usability of products for older users has rarely been investigated systematically. This study seeks to fill that gap. It is argued that the construct of experience has at least three components. It is proposed that two of these components, exposure and competence, are directly relevant for the current discussion about prior experience in inclusive design and that they can predict to different degrees the usability of a product for older users. In an empirical study, these facets of expertise are each operationalised on three levels of specificity and their impact on usability is assessed. The results show that measures of competence predict usability variables more strongly than measures of exposure and that levels of medium and high specificity are the best predictors. The application of inclusive design principles to a redesigned version of a ticket vending machine-although not resulting in a difference of overall usability-changed the impact of prior experience on usability measures implying an enhanced inclusiveness of the redesign with regard to prior experience. The implications of these findings for the effectiveness of inclusive design for older users are discussed. © 2013 Springer-Verlag Berlin Heidelberg.

Relating monolithic and granular leaching from contaminated soil treated with different cementitious binders.

This work employed a clayey, silty, sandy gravel contaminated with a mixture of metals (Cd, Cu, Pb, Ni and Zn) and diesel. The contaminated soil was treated with 5 and 10% dosages of different cementitious binders. The binders include Portland cement, cement-fly ash, cement-slag and lime-slag mixtures. Monolithic leaching from the treated soils was evaluated over a 64-day period alongside granular leachability of 49- and 84-day old samples. Surface wash-off was the predominant leaching mechanism for monolithic samples. In this condition, with data from different binders and curing ages combined, granular leachability as a function of monolithic leaching generally followed degrees 4 and 6 polynomial functions. The only exception was for Cu, which followed the multistage dose-response model. The relationship between both leaching tests varied with the type of metal, curing age/residence time of monolithic samples in the leachant, and binder formulation. The results provide useful design information on the relationship between leachability of metals from monolithic forms of S/S treated soils and the ultimate leachability in the eventual breakdown of the stabilized/solidified soil.

Durability indicators of SCC towards performance-based specifications for the durability of SCC

The fundamental principle behind the development of SCC has been the nanoscale tailoring of cementitious matrices. Although self-compacting concrete (SCC) is currently used in many countries, there is a fundamental lack of the intrinsic durability of the material itself. The scope of the current paper is to present the outcomes of a research study on some principal indicators (porosity and capillary absorption) that define the durability of SCC, and how these are compared with the corresponding parameters of conventional concrete. Furthermore, this paper investigates the addition of industrial by-products, such as fly-ash or lime powder, to SCC mixtures and their effect on the durability indicators.

Morphology, biometry and distribution of Difflugia biwae Kawamura, 1918 (Protozoa : Rhizopoda)

The freshwater testate amoeba Difflugia biwae Kawamura, 1918, isolated from Mulan Lake, Hubei Province, China is investigated using light microscopy and scanning electron microscopy. The morphology, biometry and distribution of this little known species are supplied. After careful comparison with three other similar species, including D. delicatula Gauthier-Livre et Thomas, D. elegans Penard and D. oblonga caudata Stepanek, we believe that the characteristics of smooth fusiform shell, conspicuous great collar flare (always larger than body-width) around the aperture, constriction behind the aperture and a somewhat curved aboral horn set D. biwae apart from all other Difflugia species. This species shows a great diversity in total length, collar height and aboral horn length which have high variability (CV between 11.76 and 24.52). However, body width, collar diameter, neck width, body length and aperture diameter are fairly constant with low variability (CV between 5.34 and 8.79) which shows a remarkable uniformity of D. biwae. Also, the size frequency distributions of both body width and body length yield bell-shaped (normally distributed) curves and indicate that D. biwae is a size-monomorphic species, characterized by a main-size class and a small size range. D. biwae is probably endemic to East Asia (China and Japan) because it has such a large size (165-306 mu m) that it would have been easily found in Europe and North America, if it were there. Consequently, D. biwae must have a restricted geographical distribution, disproving the old hypothesis that microscopic organisms are cosmopolitan.

In situ thermoplastic thread formation for robot built structures

We demonstrate autonomous construction of structures using a robot arm that can fabricate threads of TPA (Thermoplastic Adhesive) in free space on the fly. TPA has many important material properties that help to greatly simplify the otherwise complex task of building structures in complex environments. We present a model for the formation of TPA strings based on plastic deformation which also includes the temperature dependent material properties which change significantly as the thread is formed and cools. Experiments of drawing TPA show that drawing forces due to the viscosity of the TPA are more dominated by the speed of drawing than the changes in viscosity due to temperature. The load bearing capacity of individual strings is also modelled and measured and structures are built using the TPA strings which due to the adhesiveness can be anchored to a wide range surfaces as well as to other strings. © 2013 IEEE.

Scaling of velocity fluctuations in off-wall boundary conditions for turbulent flows

A model for off-wall boundary conditions for turbulent flow is investigated. The objective of such a model is to circumvent the need to resolve the buffer layer near the wall, by providing conditions in the logarithmic layer for the overlying flow. The model is based on the self-similarity of the flow at different heights in the logarithmic layer. It was first proposed by Mizuno and Jiménez (2013), imposing at the boundary plane a velocity field obtained on-the-fly from an overlying region. The key feature of the model was that the lengthscales of the field were rescaled to account for the self-similarity law. The model was successful at sustaining a turbulent logarithmic layer, but resulted in some disagreements in the flow statistics, compared to fully-resolved flows. These disagreements needed to be addressed for the model to be of practical application. In the present paper, a more refined, wavelength-dependent rescaling law is proposed, based on the wavelength-dependent dynamics in fully-resolved flows. Results for channel flow show that the new model eliminates the large artificial pressure fluctuations found in the previous one, and a better agreement is obtained in the bulk properties, the flow fluctuations, and their spectral distribution across the whole domain. © Published under licence by IOP Publishing Ltd.

Comparative extraction of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F-s) from a variety of solid samples

Extraction experiments with spiking of C-13(12)-PCDD/Fs were performed with a variety of PCDD/Fs contaminated samples. The extraction recovery of PCDD/Fs was mainly influenced by PCDD/Fs concentration and the sample matrix. Generally, the first soxhlet extraction with toluene has suitable recovery. From the selected samples, only FAMS4 and 5 which are fly ashes with high concentration, the recovery of the first soxhlet extraction with 24 hr. is low, but PCDD/Fs were almost completely removed after 72 hr. Copyright (C) 1996 Elsevier Science Ltd

时间自动机关于LTL性质的符号化模型检测工具及其改进

许多系统需要在规定时间内响应外部发生的事件，并迅速完成对事件的处理，这样的系统称之为实时系统。实时系统经常出现在与生命财产安全息息相关的领域，如果无法及时响应外部事件，可能会造成十分严重的后果。如何保证实时系统的正确性、可靠性受到越来越广泛的关注。 模型检测是一种对系统进行形式化验证的算法，它可以自动的在模型状态空间中搜索不满足规范的路径或状态，设计者可以根据找到的反例修改系统设计，进而提高系统的可靠性。模型检测方法的主要瓶颈是状态爆炸，符号化方法和抽象是延缓状态爆炸发生的重要手段。 时间自动机是一种使用广泛的描述实时系统的数学模型， 时序逻辑LTL是是一种常用的针对实时和并发系统的规范语言，本文主要研究了时间自动机关于LTL性质的符号化模型检测方法，并实现了相应的模型检测工具CTAV。 CTAV以DBM作为表示符号化状态的数据结构，使用DBM的操作和运算完成符号化状态的生成、存储及比较等，它通过on-the-fly的方法在生成系统符号化状态空间的同时进行性质的检测。 本文还研究了最大上下界抽象等在模型检测中的使用，比较了不同的抽象在LTL模型检测中的效果。此外还针对符号化状态的特点，对模型检测过程进行了改进，避免了不必要的状态展开。 为了方便建模，CTAV对UPPAAL模型描述语言进行了支持，并针对检测过程中变量存储的各种情况，设计了一次索引和二次索引的方法提高读写变量的速度。

语义Web规则标记语言OWLRule+的设计与实现

语义Web是对未来Web体系结构的一个伟大设想 ,其研究分层次进行 目前足够成熟的最高层是以OWL语言为代表的ontology层 但它的语义仅限于描述逻辑 ,该逻辑主要表示对象和类的层次结构 ,而规则的表达能力弱 因此在其之上需要一种表达力更丰富的逻辑语言 设计了一种新的语义Web规则标记语言OWLRule+:其语法扩展了OWL ;语义基于CARIN ,一种结合描述逻辑和Horn规则的表示语言 ;实现基于Jess规则推理机 实例学习展示了它对目前的Webontology语言在规则表示和推理能力上的扩展

Picosecond ultra-wideband short pulse radiated by antenna arrays

This report presents the experiments to study the characteristics of the picosecond ultra-wideband pulses coherent radiation. The testing involves bow-tie horn antennas for both the transninting and receiving antenna. Sixteen channels of electrical pulses with 290 ps duration and jitter < 30 ps have been used. The antenna arrays with various frames of 4 x 1, 4 x 2, 4 x 3, 4 x 4 are employed to radiate the pulses. The receiving antenna measures the electrical field in different distance front the transmitting antennas arrant The results show that if the pulses are in coherent condition, the peak power pulse of output by antennas array with N elements are N-2 of that of the single element antenna. (c) 2007 Wiley Periodicals, Inc.

转座子Minos介导的果蝇转基因平台构建及水稻高表达启动子的克隆 任娟 指

本实验室果蝇研究工作，主要集中在黑腹果蝇的新基因起源的研究。新基因起源的分子机制主要包括：外显子重排、基因复制、基因逆转座、移动元件介导、基因水平转移、基因从头起源、基因的断裂融合。为了阐述这些新基因的产生和它们所带来的物种适应性，我们对这些新近起源的基因进行了功能研究。但是，仅仅限于新基因所在物种的功能研究并不能完全解释新基因产生的进化原因，我们需要了解它是否能够给没有该基因的果蝇物种带来一定的适应性。例如一些生殖相关新基因，如果我们将它们转入没有该基因的果蝇，那是否能够给该果蝇带来生殖能力的提高？无论结果如何，这都为我们研究新基因的起源提供一个重要线索。由此，黑腹果蝇以外的其它果蝇物种中实现转基因成为该研究的重要技术环节。但是，实验室目前的转基因系统仅限于P转座子介导的黑腹果蝇转基因系统，因而我们需要建立一种新的转基因平台。而转座子Minos打破物种范围的转基因特性，以及它的转座特点为我们提供了选择。转座子Minos是从果蝇D. hydei中克隆出来长约1.8kb的Ⅱ型转座子，Tc1家族转座元件成员。Minos的转座机制与大部分转座子一样，在宿主基因组里面实行着剪切和粘贴的运作机制。Minos在转座时，偏向插入TA位点并且主要集中于内含子区域，这样可以减少对插入位置基因的影响。此外，Minos在黑腹果蝇中的转座效率约30%，并且拥有一套成熟的选择标记。因此，Minos成为我们解决非黑腹果蝇转基因技术难题的首选。 在本文的工作中，我们采用由希腊Savakis教授（希腊分子生物学与生物技术研究所）提供的Minos转基因系统，完成果蝇的转基因实验。在这套转基因系统中，非自主的转座子Minos和转座酶基因被克隆到了不同载体当中。其中Minos转座子序列中插入了由3xP3眼睛特异表达的启动子介导表达的eGFP报告基因，而转座酶基因则由热激蛋白hsp70启动子调控表达。实验过程中，我们在果蝇D. melanogaster 和D. yakuba的胚胎中分别同时显微注射入含有转座子和转座酶本实验室果蝇研究工作，主要集中在黑腹果蝇的新基因起源的研究。新基因起源的分子机制主要包括：外显子重排、基因复制、基因逆转座、移动元件介导、基因水平转移、基因从头起源、基因的断裂融合。为了阐述这些新基因的产生和它们所带来的物种适应性，我们对这些新近起源的基因进行了功能研究。但是，仅仅限于新基因所在物种的功能研究并不能完全解释新基因产生的进化原因，我们需要了解它是否能够给没有该基因的果蝇物种带来一定的适应性。例如一些生殖相关新基因，如果我们将它们转入没有该基因的果蝇，那是否能够给该果蝇带来生殖能力的提高？无论结果如何，这都为我们研究新基因的起源提供一个重要线索。由此，黑腹果蝇以外的其它果蝇物种中实现转基因成为该研究的重要技术环节。但是，实验室目前的转基因系统仅限于P转座子介导的黑腹果蝇转基因系统，因而我们需要建立一种新的转基因平台。而转座子Minos打破物种范围的转基因特性，以及它的转座特点为我们提供了选择。转座子Minos是从果蝇D. hydei中克隆出来长约1.8kb的Ⅱ型转座子，Tc1家族转座元件成员。Minos的转座机制与大部分转座子一样，在宿主基因组里面实行着剪切和粘贴的运作机制。Minos在转座时，偏向插入TA位点并且主要集中于内含子区域，这样可以减少对插入位置基因的影响。此外，Minos在黑腹果蝇中的转座效率约30%，并且拥有一套成熟的选择标记。因此，Minos成为我们解决非黑腹果蝇转基因技术难题的首选。 在本文的工作中，我们采用由希腊Savakis教授（希腊分子生物学与生物技术研究所）提供的Minos转基因系统，完成果蝇的转基因实验。在这套转基因系统中，非自主的转座子Minos和转座酶基因被克隆到了不同载体当中。其中Minos转座子序列中插入了由3xP3眼睛特异表达的启动子介导表达的eGFP报告基因，而转座酶基因则由热激蛋白hsp70启动子调控表达。实验过程中，我们在果蝇D. melanogaster 和D. yakuba的胚胎中分别同时显微注射入含有转座子和转座酶所在的质粒。转座酶在37度条件诱导下进行表达，协助Minos完成转座过程。在转基因果蝇的阳性筛选中，我们利用眼睛特异表达的绿色荧光蛋作为选择标记。并且，我们通过PCR实验进一步验证了转基因果蝇的真实性。本研究中，我们对转基因实验条件进行了初步优化。我们通过对黑腹果蝇白眼突变品系W1118和D. yakuba注射后胚胎进行保湿，对D. yakuba注射胚胎进行非退壳处理。在改进条件下W1118和D. yakuba的存活率分别为10%和3%左右。通过筛选转基因阳性果蝇，我们得出Minos在W1118和D. yakuba中的转座效率分别在32%和20%左右。我们的实验结果再一次证实了Minos在果蝇D. melanogaster中可行性。同时，该工作也初步完成了在果蝇D. yakuba 中的第一次Minos介导的转基因实验，为新基因的跨物种功能研究奠定了实验基础。在未来的工作计划中，我们将采用Minos转基因系统，把实验室目前研究的黑腹果蝇新基因导入其它物种果蝇进行功能研究。 水稻是一种重要的世界粮食作物，世界上过半的人口以水稻为主食。水稻相对别的粮食作物来讲具有较小的基因组，并且拥有较好的基因组注释，是一种理想的单子叶模式生物。植物转基因技术的发展推动着水稻功能基因组学的研究，目前水稻的转基因技术主要依赖于土壤细菌农杆菌（Agrobacterium tumefaciens）T-DNA介导的外源基因染色体插入。在自然状态下，农杆菌的T-DNA位于Ti致瘤质粒当中。它包括了一些转座元件和一些帮助T-DNA转座的毒性蛋白基因和调节基因。由于Ti质粒上的T-DNA太长，并且没有太多的酶切位点，因此自然状态的T-DNA不适合进行转基因实验。为了方便T-DNA的实际应用，研究人员创立了双载体转基因系统。T-DNA转座区被分离到出Ti载体，并且装载到另外一个适合实验操作的质粒当中，而毒性蛋白表达基因等则保留在Ti质粒上。因此，在进行T-DNA介导的转基因实验时，需要同时存在T-DNA载体和Ti质粒。 本文以“水稻注释计划数据库RAP-DB”的表达数据为参考，选择了60个高表达基因的启动子区域进行克隆。通过对T-DNA载体pCAMBIA1301 进行改造，去掉其原来的35S启动子，将预测的基因启动子克隆到该载体中并与报告基 摘要 因GUS 基因融合。通过分子克隆实验，我们得到了45个高表达基因的启动子载体。最终，为了测试这45个启动子的启动效率，我们会将它们转化到水稻愈伤组织中通过启动子融合的GUS基于表达情况来判断我们启动子的启动效率。