Performance analysis of smart grid communication protocol DNP3 over TCP/IP in a heterogeneous traffic environment

This paper presents simulation results of the DNP3 communication protocol over a TCP/IP network, for Smart Grid applications. The simulation was performed using the NS-2 network simulator. This study aimed to use the simulation to verify the performance of the DNP3 protocol in a heterogeneous LAN. Analyzing the results it was possible to verify that the DNP3 over a heterogeneous traffic network, with communication channel capacity between 60 and 85 percent, it works well with low packet loss and low delay, however, with traffic values upper 85 percent, the DNP3 usage becomes unfeasible because the information lost, re-transmissions and latency are significantly increased. © 2013 IEEE.

Draft working paper on country codes for use in processing external trade statistics

Describe un sistema de codificación de países y regiones para ser usado en el procesamiento de estadísticas de comercio exterior; analiza las deficiencias de los códigos de países existentes en el área del CARICOM; y presenta en anexos dos esquemas de clasificación.

Escalonamento de tarefas em ambiente de simulação de grid computacional

Pós-graduação em Ciência da Computação - IBILCE

Proposta de arquiterura para o estabelecimento dinâmico de conexões determinísticas e busca de recursos multidomínio em redes grid OBS baseadas no GMPLS

A capacidade de processamento das instituições de pesquisa vem crescendo significativamente à medida que processadores e estações de trabalho cada vez mais poderosos vão surgindo no mercado. Considerando a melhoria de desempenho na área de redes de computadores e visando suprir a demanda por processamento cada vez maior, surgiu a ideia de utilizar computadores independentes conectados em rede como plataforma para execução de aplicações paralelas, originando assim a área de computação em grade. Em uma rede que se encontra sob um mesmo domínio administrativo, é comum que exista o compartilhamento de recursos como discos, impressoras, etc. Mas quando a rede ultrapassa um domínio administrativo, este compartilhamento se torna muito limitado. A finalidade das grades de computação é permitir compartilhamento de recursos mesmo que estes estejam espalhados por diversos domínios administrativos. Esta dissertação propõe uma arquitetura para o estabelecimento dinâmico de conexões multidomínio que faz uso da comutação de rajadas ópticas (OBS – Optical Burst Switching) utilizando um plano de controle GMPLS (Generalized Multiprotocol Label Switching). A arquitetura baseia-se no armazenamento de informações sobre recursos de grade de sistemas autônomos (AS -Autonomous Systems) distintos em um componente chamado Servidor GOBS Raiz (Grid OBS) e na utilização do roteamento explícito para reservar os recursos ao longo de uma rota que satisfaça as restrições de desempenho de uma aplicação. A validação da proposta é feita através de simulações que mostram que a arquitetura é capaz de garantir níveis de desempenho diferenciados de acordo com a classe da aplicação e proporciona uma melhor utilização dos recursos de rede e de computação.

Micro-inverter for integrated grid-tie photovoltaic module using resonant controller

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Delaunay Tetrahedralization of the Heart Based on Integration of Open Source Codes

The Finite Element Method (FEM) is a way of numerical solution applied in different areas, as simulations used in studies to improve cardiac ablation procedures. For this purpose, the meshes should have the same size and histological features of the focused structures. Some methods and tools used to generate tetrahedral meshes are limited mainly by the use conditions. In this paper, the integration of Open Source Softwares is presented as an alternative to solid modeling and automatic mesh generation. To demonstrate its efficiency, the cardiac structures were considered as a first application context: atriums, ventricles, valves, arteries and pericardium. The proposed method is feasible to obtain refined meshes in an acceptable time and with the required quality for simulations using FEM.

Determining spatial resolution in spatial load forecasting using a grid-based model

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Spectrum Distribution in Cognitive Radio: Error Correcting Codes Perspective

Cognitive radio is a growing zone in wireless communication which offers an opening in complete utilization of incompetently used frequency spectrum: deprived of crafting interference for the primary (authorized) user, the secondary user is indorsed to use the frequency band. Though, scheming a model with the least interference produced by the secondary user for primary user is a perplexing job. In this study we proposed a transmission model based on error correcting codes dealing with a countable number of pairs of primary and secondary users. However, we obtain an effective utilization of spectrum by the transmission of the pairs of primary and secondary users' data through the linear codes with different given lengths. Due to the techniques of error correcting codes we developed a number of schemes regarding an appropriate bandwidth distribution in cognitive radio.

A NS-2 simulation model for DNP3 protocol over IEEE 802.15.4 wireless protocol toward low cost simulation of Smart Grid applications

Faced with an imminent restructuring of the electric power system, over the past few years many countries have invested in a new paradigm known as Smart Grid. This paradigm targets optimization and automation of electric power network, using advanced information and communication technologies. Among the main communication protocols for Smart Grids we have the DNP3 protocol, which provides secure data transmission with moderate rates. The IEEE 802.15.4 is another communication protocol also widely used in Smart Grid, especially in the so-called Home Area Network (HAN). Thus, many applications of Smart Grid depends on the interaction of these two protocols. This paper proposes modeling, in the traditional network simulator NS-2, the integration of DNP3 protocol and the IEEE 802.15.4 wireless standard for low cost simulations of Smart Grid applications.

Smart Grid e Carros Elétricos - Influência da Carga de Carros Elétricos Sobre o Sistema Elétrico

The technologies are advancing at a pace so expressive that allow the increase of the power quality from generation until the distribution to end customers. This improvement has been made possible through the automation of the energy that follows to a better quality of the energy provided, a lower energy supply disruptions and a very short recovery time. The trend of today and the near future is the distributed energy generation. To keep the automated control of the chain, the presence of Smart Grids is needed and that will be the most efficient and economical way to manage the entire system. Within this theme, is going to be necessary analyze the electric cars that promise to promote a more sustainable transport because it doesn’t uses fossil fuels, and more healthy because it does not emit pollutants into the atmosphere. The popularization of this type of vehicle is estimated to happen in a few decades and the case study analyzing its influence on the demand of the electrical system is something that will be very important in the near future. This paper presents a study of the influence of the inclusion of charges refering to electric cars

A BCH code and a sequence of cyclic codes

This study establishes that for a given binary BCH code C0 n of length n generated by a polynomial g(x) ∈ F2[x] of degree r there exists a family of binary cyclic codes {Cm 2m−1(n+1)n}m≥1 such that for each m ≥ 1, the binary cyclic code Cm 2m−1(n+1)n has length 2m−1(n + 1)n and is generated by a generalized polynomial g(x 1 2m ) ∈ F2[x, 1 2m Z≥0] of degree 2mr. Furthermore, C0 n is embedded in Cm 2m−1(n+1)n and Cm 2m−1(n+1)n is embedded in Cm+1 2m(n+1)n for each m ≥ 1. By a newly proposed algorithm, codewords of the binary BCH code C0 n can be transmitted with high code rate and decoded by the decoder of any member of the family {Cm 2m−1(n+1)n}m≥1 of binary cyclic codes, having the same code rate.

Biblioteca de escalonamento de tarefas em grid computacional - LIBTS

The use of computational grid simulators is particularly important for studying the algorithms of task scheduling. Through the simulators it’s possible to assess and compare the performance of different algorithms in various scenarios. Despite the simulation tools provide basic features for simulation in distributed environments, they don’t offer internal policies of task scheduling, so that the implementation of the algorithms must be realized by the user himself. Therefore, this study aims to present the library of task scheduling LIBTS (LIBrary Tasks Scheduling) which is developed and adapted to the SimGrid simulator to provide the users with a tool to analyze the algorithms of task scheduling in the computational grid.

Construction and decoding of BCH codes over chain of commutative rings

In this paper, we present a new construction and decoding of BCH codes over certain rings. Thus, for a nonnegative integer t, let A0 ⊂ A1 ⊂···⊂ At−1 ⊂ At be a chain of unitary commutative rings, where each Ai is constructed by the direct product of appropriate Galois rings, and its projection to the fields is K0 ⊂ K1 ⊂···⊂ Kt−1 ⊂ Kt (another chain of unitary commutative rings), where each Ki is made by the direct product of corresponding residue fields of given Galois rings. Also, A∗ i and K∗ i are the groups of units of Ai and Ki, respectively. This correspondence presents a construction technique of generator polynomials of the sequence of Bose, Chaudhuri, and Hocquenghem (BCH) codes possessing entries from A∗ i and K∗ i for each i, where 0 ≤ i ≤ t. By the construction of BCH codes, we are confined to get the best code rate and error correction capability; however, the proposed contribution offers a choice to opt a worthy BCH code concerning code rate and error correction capability. In the second phase, we extend the modified Berlekamp-Massey algorithm for the above chains of unitary commutative local rings in such a way that the error will be corrected of the sequences of codewords from the sequences of BCH codes at once. This process is not much different than the original one, but it deals a sequence of codewords from the sequence of codes over the chain of Galois rings.