Collapsed isoparametric element as a singular element for a crack normal to the bi-material interface

It is shown that the variable power singularity of the strain field at the crack tip can be obtained by the simple technique of collapsing quadrilateral isoparametric elements into triangular elements around the crack tip and adequately shifting the side-nodes adjacent to this crack tip. The collapsed isoparametric elements have the desired singularity at crack tip along any ray. The strain expressions for a single element have been derived and in addition to the desired power singularity, additional singularities are revealed. Numerical examples have shown that triangular elements formed by collapsing one side lead to excellent results.

Singular behaviour near the tip of a sharp V-notch in a power law hardening material

This paper presents an asymptotic analysis of the near-tip stress and strain fields of a sharp V-notch in a power law hardening material. First, the asymptotic solutions of the HRR type are obtained for the plane stress problem under symmetric loading. It is found that the angular distribution function of the radial stress sigma(r) presents rapid variation with the polar angle if the notch angle beta is smaller than a critical notch angle; otherwise, there is no such phenomena. Secondly, the asymptotic solutions are developed for antisymmetric loading in the cases of plane strain and plane stress. The accurate calculation results and the detailed comparisons are given as well. All results show that the singular exponent s is changeable for various combinations of loading condition and plane problem.

Inhomogeneous behavior of antiplane shear crack in softening material with local unloading

Examined in this work is the anti-plane stress and strain near a crack in a material that softens beyond the elastic peak and unloads on a linear path through the initial state. The discontinuity in the constitutive relation is carried into the analysis such that one portion of the local solution is elliptic in character and the other hyperbolic. Material elements in one region may cross over to another as the loading is increased. Local unloading can thus prevail. Presented are the inhomogeneous character of the asymptotic stress and strain in the elliptic and hyperbolic region, in addition to the region in which the material elements had experienced unloading. No one single stress or strain coefficient would be adequate for describing crack instability.

Creep characterization of a fiber reinforced plastic material

Creep behavior of [±45°]_s composite material is characterized by using uniaxial creep and recovery tests. The well-known Schapery nonlinear viscoelastic consti tutive relation was modified to make it suitable for characterizing the creep behavior of this material. Then, using this modified Schapery constitutive equation, by which the vis coplastic and creep damage can be taken into consideration, the creep behavior of [±45°]. glass fiber reinforced epoxy laminate was studied. The constitutive parameters of the material were determined experimentally, and the procedure and method of determination of the material parameters are proved to be valid.

Influence of secondary void damage in the matrix material around voids

The mechanism of ductile damage caused by secondary void damage in the matrix around primary voids is studied by large strain, finite element analysis. A cylinder embedding an initially spherical void, a plane stress cell with a circular void and plane strain cell with a cylindrical or a flat void are analysed under different loading conditions. Secondary voids of smaller scale size nucleate in the strain hardening matrix, according to the requirements of some stress/strain criteria. Their growth and coalescence, handled by the empty element technique, demonstrate distinct mechanisms of damage as circumstances change. The macroscopic stress-strain curves are decomposed and illustrated in the form of the deviatoric and the volumetric parts. Concerning the stress response and the void growth prediction, comparisons are made between the present numerical results and those of previous authors. It is shown that loading condition, void growth history and void shape effect incorporated with the interaction between two generations of voids should be accounted for besides the void volume fraction.

Edital nº 01/86 : concurso público para Técnico em Material e Patrimônio

Torna pública a abertura de inscrição para concurso público destinado ao preenchimento de cargos de Técnico em Material e Patrimônio, do Grupo-Atividades de Apoio Legislativo da Câmara dos Deputados.

The effect of strain softening in the matrix material during void growth

Furthermore, the compressed flow driven by the piston is discussed. The consistent solution of gasdynamical equations including solar gravity is obtained for the unsteady and two-dimensional configuration, which is applied to the region between the piston and shock wave. This solution may satisfy the jump conditions of shock wave, which separates the region of compressed flow and quiet corona.

Broughton Archipelago Clam Terrace Survey : final report

During a 1995 aerial video survey of the coastline of Johnstone Strait, an unusual shoreline feature was noted and termed “clam terraces” (inset) because of the terrace-type morphology and the apparent association with high clam productivity on the sandflats. Typical alongshore lengths of the terrace ridges are 20-50m, and across-shore widths are typically 20-40m. An area with an especially high density of clam terraces was noted in the Broughton Archipelago, between Broughton and Gilford Islands of southeastern Queen Charlotte Strait. Clam terraces in this area were inventoried from the aerial video imagery to quantify their distribution. The terraces accounted for over 14 km of shoreline and 365 clam terraces were documented. A three-day field survey by a coastal geomorphologist, archeologist and marine biologist was conducted to document the features and determine their origin. Nine clam terraces were surveyed. The field observations confirmed that: the ridges are comprised of boulder/cobblesized material, ridge crests are typically in the range of 1-1.5m above chart datum, sandflats are comprised almost entirely of shell fragments (barnacles and clams) and sandflats have very high shellfish production. There are an abundance of shell middens in the area (over 175) suggesting that the shellfish associated with the terraces were an important food source of aboriginal peoples. The origin of the ridges is unknown; they appear to be a relict feature in that they are not actively being modified by present-day processes. The ridges may be a relict sea-ice feature, although the mechanics of ridge formation is uncertain. Sand accumulates behind the ridge because the supply rate of the shell fragments exceeds the dispersal rate in these low energy environments. The high density areas of clam terraces correspond to high density areas of shell middens, and it is probable that the clam terraces were subjected to some degree of modification by aboriginal shellfish gatherers over the thousands of years of occupation in the region. (Document contains 39 pages)

Preliminary studies on food and feeding habits of Polypterus endlicheri and Polypterus senegalus in Lake Chad

The food and feeding habits of Polyprerus cncllicheri and Polypterus senegalus was carried out in the months of September to October. The food of 33 Polypierus endlicheri as observed include Tilapia species (89.3%), Eutropius niloticus (28.6%), Mayfly nymph (39.3%), Dragon fly larva (56.6%) fish remains (21.4%) and detritus (7.1%). The food of27 Polypterus senegalus as observed include Tilapia sp (88.4%), Eutropius niloticus (27.9%), may fly nymph (23.3%), Dragonfly nymph (34.9%) remains (21.1%) detritus (23.3%). (9 page document) The percentage occurrence of food item found in the stomach of Polypterus endlieheri is 93.3% while that of Polyprerus senegalus is 67.4%. The dominance of Tilapia sp was establish in the study, and there is no significant difference between the feeding habit of Polypterus endlicheri and Polyprerus senegalus.

Serviço de intercâmbio de material bibliográfico da Biblioteca da Câmara dos Deputados : uma proposta de melhoria que contemple a arquitetura da informação

Proposta de melhoria do Serviço de Intercâmbio da Biblioteca da Câmara dos Deputados a partir da adoção de um novo modelo balizado pela Arquitetura da Informação e que contemple os recursos tecnológicos atualmente disponíveis. Dentre as justificativas para esta proposta estão a necessidade de modernização para manutenção do serviço, um dos pilares do desenvolvimento de coleções; e o alinhamento deste serviço ao comportamento do usuário pela busca de informação, que vem mudando após o advento da internet. A pesquisa é do tipo exploratória que apresenta a revisão de literatura como base para a fundamentação teórica, na qual são discutidos os aspectos teóricos do desenvolvimento de coleções na modalidade de aquisição por doação, realizada por meio do serviço de intercâmbio entre as bibliotecas. No procedimento metodológico foi feito um estudo no Serviço de Intercâmbio da Biblioteca da Câmara dos Deputados para obter os dados estatísticos que quantificam essa atividade. Foi elaborado um questionário, e enviado as 14 bibliotecas da Rede RVBI para conhecer o funcionamento do serviço de intercâmbio em cada uma delas. Com base nas respostas advindas do questionário foi sugerida a criação de um catálogo coletivo de acesso público via web, nos moldes do Portal Estante Virtual, para centralizar e gerenciar as atividades de intercâmbio de publicações. Os objetivos do catálogo são centralizar as informações e substituir um serviço pouco automatizado nas bibliotecas, outros objetivos do catálogo são agilizar a troca de publicações entre bibliotecas, propiciar economia de espaço, de recursos humanos e financeiros ao otimizar as rotinas e promover a democratização das listas de doações para um número maior de bibliotecas.