Estrutura, ultraestrutura e morfometria da aorta de paca (Cuniculus paca, Linnaeus, 1766) criada em cativeiro

The aim of this study was to describe the morphology, morphometry and ultrastructure of segments of thoracic and abdominal aorta portions in four male and female paca (Cuniculus paca). Parts of the segments were examined by light microscopy and part by scanning electron microscopy. Thickness measurements of the tunica intima and media complex and tunica adventitia of the aorta were taken. In all animals the thickness values for the tunica intima and media complex of the cranial thoracic aorta were significantly higher (mean: 702.19 mu m) when compared to the values of other aortic segments analyzed (means: 354.18 mu m; 243.55 mu m). The layers of the vessel walls show variations in structure and thickness, presumably due to an adaptation to functionaldemand.

A metodologia de superfície de resposta como ferramenta para a avaliação da produção de alginato e poli-hidroxibutirato pela Azotobacter vinelandii

The response surface methodology as a tool for assessing the production of alginate and polyhydroxybutirate by Azotobacter vinelandii. Alginate is a polysaccharide extracted from cell walls of brown algae and used in the food, pharmaceuticals and biotech industries. Production is concentrated on the cultivation of brown seaweed, but several bacteria of the genus Pseudomonas and Azotobacter produce alginate. The chemical structure of alginates produced by algae is similar to those synthesized by A. vinelandii. The bacteria also produce intracellular polymers such as polyhydroxybutyrate (PHB), known as bioplastic. This work studied the simultaneous alginate and PHB production by A. vinelandii using sucrose and different parameters of fermentation in an orbital shaker. The optimal values for the production of these compounds were determined by the MSR. The first experiment was a 2(6-2) factorial design. The second was based on significant variables of the first, resulting in a full 3(3-0) factorial design. From the first to the second, an increase was observed in the PHB productivity from 12 to 45 mg g(-1) cell h(-1) and alginate from 100 to 1,600 mg g(-1) of cell h(-1). The productivity of both compounds was in the maximum incubation temperature of 62 degrees C, in the shortest time of incubation (18h) and the sucrose concentration, 11 g L(-1). In both experiments the PHB extracted presented purity of 94%.

Estrutura em quilha Brasil central, uma feicao fundamental na geologia de Goias e Tocantins

The older Precambrian geological setting of north Goias/south Tocantins includes three areas of granite-greenstone terrains formed of medium-grade gneisses with associated greenstone belts and nepheline syenitic gneisses, separated by two orogenic belts composing a crustal-scale pop-up structure. The movements were firstly oblique towards NW along the northwestern NNE-SSW-trending Porto Nacional suture, and afterwards of essentially frontal type towards ESE along the southeastern Ceres suture of curved geometry with N-S direction at north and WNW-ESE at the south. The Porangatu block, limited by these sutures, was upthrusted over the neighbouring underthrusted blocks. Three principal kinematic phases are recognized along the orogenic belts. -from English summary

Estrutura de guildas de polinizacao de Solanum aculeatissimum Jacq. e S. variabile Mart. (Solanaceae)

Some aspects of the reproductive biology of Solanum aculeatissimum and S. variabile (Solanaceae) were considered in this study with special reference to floral visitants and their behavior. The most frequent Solanum visitors are bees of the genus Centris, Epicharis, Bombus, Oxaea and Xylocopa that collect pollen from the anthers by means of body vibration. The behavior of those bees on the flowers and their flight distances makes them important pollinators mainly to Solanum aculeatissimum that bears cross-pollination. The guild of pollination of Solanum aculeatissimum and S. variable is composed by bees of the cited genus and by bees of the genus Thygather, Pseudaugochloropsis and Euglossa.

Ultra-estrutura de glândulas abdominais tegumentares em Oxaea flavescens (Hymenoptera, Andrenidae, Oxaeinae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adesão de protozoários ̀a superfície de dispositivos intra-uterinos

Intrauterine devices (IUD) have been used by approximately hundred million of women in the world. IUD are unprescribed to women who have pelvic inflammation disease predisposition which is caused in general by non-treated sexually transmitted diseases (STD). Trichomoniasis, one of the most important vaginal infections, is caused by a flagellated protozoan, Trichomonas vaginalis, transmitted by sexual contact and also asyntomatic women are able to transmit it. The objective of this work was verify by scanning microscopy the adhesion of this protozoan on plastic and metalic IUD surfaces. IUD fragments were added in Diamond medium containing T. vaginalis and after 3 days at 37°C incubation, they were taken out and treated as necessary for scanning microscopy. The analysis showed showed the adhesion of the protozoans on plastic and metalic IUD surfaces. Even though the IUD were not yet directly associated with high incidence of the inflammation pelvic disease, it would become an infection reservoir of potencial pathogenic organisms.

Morfologia da micrópila e da superfície dos ovócitos de piracanjuba, Brycon orbignyanus (Osteichthyes, Characidae), sob microscopia eletrônica de varredura

This paper studied the morphology of oocytes of Brycon orbignyanus, (Osteichthyes, Characidae), through observation in Scanning Electron Microscopy (SEM). Fragments of the ovaries from adult females were collected. During the reproductive period, a hormonal induction in females was carried out to collect the oocytes after extrusion. The samples were fixed and processed for observation in SEM. Results showed that the oocytes of B. orbignyanus had a follicular epithelium formed by a single layer of cells with compressed shape, covering the whole radiatta zone that showed a smooth and regular surface with innumerable pores. The micropyle had a funnel-shaped, containing several furrows. The oocyte surface around the micropyle presented pores closer of each other than the other surface areas of radiatta zone.

Microemulsões: Estrutura e aplicações como sistema de liberação de fármacos

Depending on formula composition, microemulsions may be used as a vehicle for drug administration. In this work the main applicable parameters used in the development of pharmaceutical microemulsions (ME) are analyzed. The conceptual description of the system, theoretical parameters related to formation of internal phases and some aspects of ME stability are described. The pseudo ternary phase diagram is used to characterize ME boundaries and to describe different structures in several regions of the diagram. Some applications of ME as drug delivery systems for different administration routes are also analyzed. ME offer advantages as drug delivery systems, because they favor drug absorption, being in most cases faster and more efficient than other methods in delivering the same amount of drug.

Estrutura genética de populações de Trichilia pallida Swartz (Meliaceae) por marcadores RAPD

Trichilia pallida Swartz is an Atlantic Forest shady climax tree of Meliaceae family that presents insecticide properties against chewing insects like as some family trees, making it interesting for forestry uses. Forty plants of Oito Pontas Farm population were collected in Bofete County, Santa Genebra Ecological Station in Campinas County, and Caetetus Ecological Station in Gélia County, all in the Sao Paulo State, Brazil. Leaf DNA analysis was used by RAPD method, that showed 10 highly polymorphic primers, with 72 dominant markers, used to estimate genetic diversity within and among populations. The polymorphism within populations varied from 90.3 to 97.2%, and the effective allele number varied from 1.46 ± 0.33 to 1.57 ± 0.33, while the average of genetic differentiation of populations varied from 0.27 ± 0.18 to 0, 33 ± 0.15. The gene diversity in the total population (H T) was 0.334 ± 0.02, while the average gene diversity within populations (H s) was 0.292 ± 0.017, and the coefficient of gene differentiation (G ST) was 0.125, Bofete and Campinas populations had the smallest Nei's genetic distance (0.049) and the distances of both with Gália were 0.117 and 0.107, respectively.

Avaliação da formação do biofilme de Candida albicans sobre superfície de titânio revestida com hidroxiapatita por meio de microscopia eletrônica de varredura

In this study Candida albicans biofilm formation on the surface of commercially pure titanium (cp-Ti) coated with hydroxyapatite was observed by means of scanning electron microscope. The biofilm was formed after 45 days of incubation of the samples in liquid culture medium inoculated with fungus cells in a tube of polystyrene with screw cap and sterilized. After the biofilm removal with 10% EDTA solution was observed pitting on the surface of cp-Ti coated.

Efeitos do parasitismo sobre a estrutura branquial de Leporinus macrocephalus Garavello e Britsk, 1988 (Anastomidae) e Piaractus mesopotamicus Holmberg, 1887 (Osteichthyes:Characidae).

This work described the lesions caused in different species of fish by gill parasites from fee-fishing at Guariba, State of São Paulo. The research was developed from april, 1997 to march to 1999, seeking to verified the kind tissues lesions from fish. Of these, forty and seven were Leporinus macrocephalus and fifty and five Piaractus mesopotamicus. About 87.2% of the L. macrocephalus, and 58.1% of the P. mesopotamicus were sponged by several species of parasites. The parasite most abundant in L. macrocephalus was Piscinoodinium pillulare, while monogenean, Trichodina sp and myxosporidian infected P. mesopotamicus. Severe gill lesions have been observed in L. macrocephalus and P. mesopotamicus caused by monogenean, P. pillulare e Trichodina sp. parasitism, such as intersticial hemorrhage, sub-epithelium edema, inflammation, epitelial hiperplasy in filaments and lamina, proliferation of mucosal cells and laminar fusion.

Modelagem numérica da superfície na geração da planialtimetra segundo dados de quatro equipamentos topogríficos

The aim of this present work was to compare planialtimetric charts obtained from different risings using two different theodolite types, a total station, and a precision level, used as control. Using a total station, an area was marked with clear variations of relief, following a grid, with a distance of 20 meters among stakes. After that, the stakes were read by the total station and two theodolites of different precisions. The geometric leveling was done by a precision level. The data were input in the DataGeosis software and the numerical modelling of the land was made with mesh of maximum rigidity, generating planialtimetric representation for each rising. It was verified, through comparison of the four representations that little variations occur in relation to the control. The closest representation of the control was the planialtimetry based on the data from the total station, in which the representations obtained from the theodolites were identical among themselves. It was concluded that in the process of obtaining detailed planialtimetry of small areas, submitted to the grid, it was not necessary to use composed geometric leveling, reducing work to the exclusive use of a total station or conventional theodolite.

Análise de superfície de tendência aplicada à chuva, medida por radar meteorológico, nas regiões de Assis e Piracicaba, SP

This paper presents the results from lineal trend surface analysis technique application. The purpose was to detect positive and negative anomalies in the rain measure distribution obtained by the meteorological radar Doppler, band S, located in Bauru, during the period of 21 of October/2004 to 29 of April/2005 in the areas of Assis and Piracicaba. Using three Z-R radar relations for rain quantification was chosen the specific equation Z = 32R1,65, as the best one. The results showed that the applied methodology was able to indicate the space distribution of the rain accumulated, identifying and locating the regions where there was rainy excess and rainy lack during each analyzed period. Such results indicate areas with larger pluvial impact and consequently more favorable for environmental damages.

Estrutura térmica identificada por transectos móveis e canal termal do Landsat 7 em cidade tropical

This study aims to examine the thermal structure of the urban climate based on the interpretation of the satellite Landsat 7 (thermal channel) and measures for the area. It identifies how the production of urban climate develops based on an analysis of the structure of space forms and characteristics of land use and constructive materials in the generation of heat islands and their implications in environmental comfort in a tropical climate medium size city at Brazil. To check intra-urban air temperature, measures were carried out in mobile transects in the North-South and East-West routes. Thermal Channel data of Landsat-7, were converted to surface values. The results showed that the pattern of urbanization and characteristics of land use are responsible for the distribution of temperature generating heat islands in downtown and popular densely built neighborhoods. In those cases the highest indexes of social segregation added to higher temperature also provokes elevation in the number of illnesses and morbidity cases, mostly of respiratory diseases.

Aplicação da metodologia de superfície de resposta na remediação de um solo arenoso contaminado artificialmente com cobre

Soil flushing is an alternative remediation technology for soils contaminated with heavy metals, which the main contaminant removing process consists in percolating an extraction solution. This work aimed to use the response surface methodology to point out combinations among the parameters of the extraction solution (Na2EDTA concentration, volume e pH) in order to reduce the concentration of copper in a sandy soil to risk levels lower than the intervention levels for exposure scenarios adopted by the Environmental Company of Sao Paulo State. Thus, a series of tests in leaching columns were carried out using a Fluvisol artificially contaminated (1257,3 mg kg-1). The tests were conducted in triplicate and setup a central composite rotatable design with 15 different parameters combinations of the extraction solution and one replicate in the center point. Using 5% significance level, the adjusted model (R2 = 0,98) indicated combinations of Na2EDTA concentration, pH and volume of the extraction solution which allow reduction of copper concentration below levels reported by environmental agency of Sao Paulo State for industrial, residential, agricultural or maximum exposure scenarios.