Custo de produção e rentabilidade de abacaxizeiro cv. pérola em Cassilândia (MS), sob diferentes doses de potássio

The pineapple crop are high potential for economic expression and social, but problems with productivity and management of production costs can be solved in order to ensure the sustainability of the farming system. The objective of this study was determine the cost of production and profitability of the pineapple's cultivation Pearl in Cassilandia-MS, under application of potassium doses fertilizer. The treatments consisted of the following doses of potassium (K2O): 0, 200, 400, 600, 800 kg ha(-1), used as a commercial source of potassium chloride (60% K2O). Were determined by estimating the effective operational cost (EOC), total operating cost (TOC), gross (RB), operating profitability (LO), profitability index (%), productivity of balance and equilibrium price. It was found that all treatments had operating profitability and positive profitability index. Potassium fertilization with 200 kg ha(-1) gave an average productivity of 50416.58 kg ha(-1), and also promoted the highest operating profit of R$ 9,108.97, the profit margin of 36.13% and best benefit cost (R$ 1.57).

Controle vetorial para velocidade de um motor de indução trifásico utilizando estimador filtro de Kalman

This paper describes the study, computer simulation and feasibility of implementation of vector control speed of an induction motor using for this purpose the Extended Kalman Filter as an estimator of rotor flux. The motivation for such work is the use of a control system that requires no sensors on the machine shaft, thus providing a considerable cost reduction of drives and their maintenance, increased reliability, robustness and noise immunity as compared to control systems with conventional sensors

Síntese e caracterização de tungstatos de cério e estrôncio para fins catalíticos

The main goal of this work was to produce nanosized ceramic materials of the family of the tungstates (tungstates of cerium and strontium), and test them for their catalytic activity in processes involving the transformation of methane (CH4). The methodology used for the synthesis of the ceramic powders involved the complexation combining EDTA-citrate. The materials characterization was performed using simple and differential thermogravimetry, x-ray diffraction, transmission electron microscopy, and energy dispersive spectroscopy (EDS). The microstructure analysis was performed using the refinement by the Rietveld method, and the crystallite size and distribution of the materials was elucidate by the Scherrer and Williamson-Hall methods. The conditions of the synthesis process for the three envisaged materials (SrWO4, SrWO4 using tungsten oxide concentrate as raw material, and Ce2(WO4)3) were adjusted to obtain a single phase crystalline material. The catalytic tests were carried out in the presence of methane and synthetic air, which is composed of 21% O2 and 79% N2. The analysis of the conversion of the reaction was done with the aid of an fourier transform infrared device (FTIR). The analysis showed that, structurally, the SrWO4 produced using raw materials of high and poor purity (99% and 92%, respectively) are similar. The ideal parameters of calcination, in the tested range, are temperature of 1000 °C and time of calcination 5 hours. For the Ce2(WO4)3, the ideal calcination time and are temperature 15 hours and 1000°C, respectively. The Williamson-Hall method provided two different distributions for the crystallite size of each material, whose values ranged between the nanometer and micrometer scales. According to method of Scherrer, all materials produced were composed of nanometric crystallites. The analyses of transmission electron microscopy confirmed the results obtained from the Williamson- Hall method for the crystallite size. The EDS showed an atomic composition for the metals in the SrWO4 that was different of the theoretical composition. With respect to the catalytic tests, all materials were found to be catalytically active, but the reaction process should be further studied and optimized.

Modelagem e simulação da deposição de parafinas em escoamento turbulento

The flow assurance has become one of the topics of greatest interest in the oil industry, mainly due to production and transportation of oil in regions with extreme temperature and pressure. In these operations the wax deposition is a commonly problem in flow of paraffinic oils, causing the rising costs of the process, due to increased energy cost of pumping, decreased production, increased pressure on the line and risk of blockage of the pipeline. In order to describe the behavior of the wax deposition phenomena in turbulent flow of paraffinic oils, under different operations conditions, in this work we developed a simulator with easy interface. For that we divided de work in four steps: (i) properties estimation (physical, thermals, of transport and thermodynamics) of n-alkanes and paraffinic mixtures by using correlations; (ii) obtainment of the solubility curve and determination the wax appearance temperature, by calculating the solid-liquid equilibrium of parafinnic systems; (iii) modelling wax deposition process, comprising momentum, mass and heat transfer; (iv) development of graphic interface in MATLAB® environment for to allow the understanding of simulation in different flow conditions as well as understand the matter of the variables (inlet temperature, external temperature, wax appearance temperature, oil composition, and time) on the behavior of the deposition process. The results showed that the simulator developed, called DepoSim, is able to calculate the profile of temperature, thickness of the deposit, and the amount of wax deposited in a simple and fast way, and also with consistent results and applicable to the operation

Avaliacao de dados de secagem de suspensoes de polpas de frutas em leito de jorro com alimentacao intermitente

The objective of this work was the development and improvement of the mathematical models based on mass and heat balances, representing the drying transient process fruit pulp in spouted bed dryer with intermittent feeding. Mass and energy balance for drying, represented by a system of differential equations, were developed in Fortran language and adapted to the condition of intermittent feeding and mass accumulation. Were used the DASSL routine (Differential Algebraic System Solver) for solving the differential equation system and used a heuristic optimization algorithm in parameter estimation, the Particle Swarm algorithm. From the experimental data food drying, the differential models were used to determine the quantity of water and the drying air temperature at the exit of a spouted bed and accumulated mass of powder in the dryer. The models were validated using the experimental data of drying whose operating conditions, air temperature, flow rate and time intermittency, varied within the limits studied. In reviewing the results predicted, it was found that these models represent the experimental data of the kinetics of production and accumulation of powder and humidity and air temperature at the outlet of the dryer

Modelagem e simulação de um separador bifásico com inversão de fases induzida

The present work has the main goal to study the modeling and simulation of a biphasic separator with induced phase inversion, the MDIF, with the utilization of the finite differences method for the resolution of the partial differencial equations which describe the transport of contaminant s mass fraction inside the equipment s settling chamber. With this aim, was developed the deterministic differential model AMADDA, wich was admensionalizated and then semidiscretizated with the method of lines. The integration of the resultant system of ordinary differential equations was realized by means of a modified algorithm of the Adam-Bashfort- Moulton method, and the sthocastic optimization routine of Basin-Hopping was used in the model s parameter estimation procedure . With the aim to establish a comparative referential for the results obtained with the model AMADDA, were used experimental data presented in previous works of the MDIF s research group. The experimental data and those obtained with the model was assessed regarding its normality by means of the Shapiro-Wilk s test, and validated against the experimental results with the Student s t test and the Kruskal-Wallis s test, depending on the result. The results showed satisfactory performance of the model AMADDA in the evaluation of the MDIF s separation efficiency, being possible to determinate that at 1% significance level the calculated results are equivalent to those determinated experimentally in the reference works

Avaliação cinética e potencial do Nb2O5 obtido a partir de um complexo de nióbio para formação do oleato de metila através da reação de esterificação do ácido oleico

Among the heterogeneous catalysts materials made from niobium show up as an alternative to meet the demand of catalysts for biodiesel production. This study aims to evaluate the potential of a heterogeneous catalyst derived from a complex of niobium in the reaction of methyl esterification of oleic acid. The catalyst was synthesized after calcination at different temperatures of a niobium complex ((NH4)3[NbO(C2O4)3].H2O) generating a niobium oxide nanostructure with a different commercial niobium oxide used to synthesize the complex. The commercial niobium oxide, the complex niobium and niobium catalyst were characterized by thermogravimetry (TG and DTA), surface area analysis (BET), scanning electron microscopy (SEM) and X-ray diffraction (XRD), showing the catalyst has researched morphological and crystallographic indicating a catalytic potential higher than that of commercial niobium oxide characteristics. Factorial with central composite design point, with three factors (calcination temperature, molar ratio of alcohol/oleic acid and mass percentage of catalyst) was performed. Noting that the optimal experimental point was given by the complex calcination temperature of 600°C, a molar ratio alcohol/oleic acid of 3.007/1 and the catalyst mass percentage of 7.998%, with a conversion of 22.44% oleic acid in methyl oleate to 60 min of reaction. We performed a composite linear and quadratic regression to determine an optimal statistical point of the reaction, the temperature of calcination of the complex at 450°C, the molar ratio of alcohol/oleic acid 3.3408/1 and mass percentage of catalyst of 7.6833% . Kinetic modeling to estimate parameters for heterogeneous catalysis it set well the experimental results with a final conversion of 85.01% with 42.38% of catalyst and without catalyst at 240 min reaction was performed. Allowing to evaluate the catalyst catalytic studied has the potential to be used in biodiesel production

Funções psicofísicas para área percebida, inferida e relembrada: o efeito da idade

O objetivo deste trabalho foi verificar o efeito da idade no expoente da função-potência nas Condições experimentais Perceptiva, Memória e Inferência. Para cada Condição, as faixas etárias dos sujeitos variaram de 17 a 34 anos (I), 38 a 57 anos (II) e 58 a 77 anos de idade (III). Os sujeitos estimaram áreas dos Estados do Brasil, utilizando o método psicofísico de estimação de magnitude. Os resultados obtidos pelas três Faixas etárias não diferiram para cada Condição experimental, com exceção da Condição Memória (24 horas). A análise entre as Condições experimentais e Faixas etárias evidenciou uma diferença da Condição Perceptiva em relação às demais, não havendo diferenças entre as Condições Memória e Inferência. Os dados apresentados sugerem que no processo de relembrar, não há perda da informação em função da idade.

Capacidade cardiorrespiratória e distribuição de gordura corporal de mulheres com 50 anos ou mais

Verificar a relação entre capacidade cardiorrespiratória e gordura corporal em mulheres. Foram analisadas 229 mulheres com idade entre 50 e 84 anos. Foi realizada avaliação antropométrica e calculada a razão cintura/quadril, bem como o índice de conicidade. A capacidade cardiorrespiratória foi avaliada pelo teste de caminhada de seis minutos. Com o pedômetro foi possível avaliar: velocidade, comprimento da passada e total de passos. Os resultados foram distribuídos em quartil, e a comparação feita pela análise de variância com post-hoc. A relação entre teste de caminhada de seis minutos e a antropometria foi feita pela correlação de Pearson. Os resultados revelaram que mulheres com capacidade cardiorrespiratória no quartil4 apresentaram idade estatisticamente menor (p<0,05) que as do quartil1. As medidas antropométricas apresentaram valores menores (p<0,05), quando comparados os resultados dos quartis3 e 4 com os quartis1 e 2. Conclui-se que mulheres com maior tecido adiposo e acúmulo de gordura central apresentam menor capacidade cardiorrespiratória.

Migração e seletividade na região nordeste: um estudo a partir dos dados do censo demográfico de 2010

The aim of this study is to analyze the effect of migration on the income differential between northeastern migrants and nonmigrants and there by verify that the immigrants make up a group or not positively selected. The assumption that will be tested is that the presence of these immigrants affects income inequality in the region receptor, which may explain part of the high-stopping inequality in the Brazilian Northeast. The study is based on the literature selectivity migration introduced by Roy (1951), Borjas (1987) and Chiswick (1999). Does the estimated wage equation Mincer (1974) through the method of OLS, using information from the microdata sample of the 2010 Census, the Brazilian Institute of Geography and Statistics (IBGE). The results which correspond to the comparison of socioeconomic profile, showed that immigrants are more qualified and, on average, better paid than non-migrants. With the estimation of the model, it was found that, keeping all other variables constant, the income that immigrants earn is 14.43% higher than that of non-migrants. Thus, there was existence of positive selectivity in migration directed to the Northeast

Classic and molecular study of Giardia duodenalis in children from a daycare center in the region of Presidente Prudente, São Paulo, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Exercícios respiratórios para asma: revisão sistemática com metanálise

Introdução: A asma se tornou um problema de saúde pública devido aos seus grandes custos em cuidados de saúde. Os exercícios respiratórios constituem uma intervenção não farmacológica de baixo custo e baixo risco que vem sendo utilizada por fisioterapeutas em diferentes países no tratamento de pacientes asmáticos. Objetivo: Avaliar a eficácia dos exercícios respiratórios no tratamento de pacientes adultos com asma nos seguintes desfechos: qualidade de vida, sintomas da asma, número de exacerbações agudas, episódios de hospitalização, mensurações fisiológicas (função pulmonar e capacidade funcional), número de consultas médicas, número de faltas no trabalho devido a exacerbações da doença, avaliação subjetiva do paciente em relação à intervenção. Método: Revisão sistemática de estudos controlados randomizados com metanálise realizada em parceria com a Colaboração Cochrane. As seguintes bases de dados foram consultadas: the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, CINAHL, AMED, e PsycINFO, além de busca manual em revistas da área e em resumos de congressos. Os seguintes termos foram utilizados: (breath*) and (exercise* or retrain* or train* or re-educat* or educat* or physiotherap* or "physical therap*" or "respiratory therapy" or buteyko ). As listas de referências dos estudos selecionados e registros de ensaios clínicos também foram consultados. A seleção dos estudos e a avaliação do risco de viés dos estudos incluídos foram realizadas de maneira independente por dois revisores. O software Review Manager foi utilizado para análise dos dados, no qual o modelo de efeito fixo foi utilizado. As variáveis contínuas foram expressas como diferença de média ponderada com um intervalo de confiança de 95%. A heterogeneidade dos resultados dos estudos incluídos foi realizada por meio da análise dos Forest plots. O teste qui-quadrado (Chi2) com um P valor de 0.10 foi utilizado para indicar significância estatística. O Índice de heterogeneidade (I2) foi implementado com um valor acima de 50% como um nível substancial de heterogeneidade. Resultados: 13 estudos envolvendo 906 pacientes estão atualmente incluídos na revisão. Os seguintes desfechos foram mensurados pelos estudos incluídos: qualidade de vida, sintomas da asma, número de exacerbações agudas e função pulmonar. Os estudos relataram uma melhora na qualidade de vida, sintomas da asma e número de exacerbações agudas. Seis dos onze estudos que avaliaram função pulmonar mostraram uma diferença significativa favorável aos exercícios respiratórios. Não houve relato de efeitos adversos. Devido à heterogeneidade substancial encontrada entre os estudos, metanálise foi possível apenas para sintomas da asma, a qual incluiu dois estudos e mostrou uma diferença significativa favorável aos exercícios respiratórios. A avaliação do risco de viés foi prejudicada devido ao relato incompleto de aspectos metodológicos pela maioria dos estudos incluídos. Conclusão: Embora os resultados encontrados pelos estudos incluídos demonstraram individualmente que os exercícios respiratórios podem ser importantes no tratamento da asma, não há evidência conclusiva nesta revisão para suportar ou refutar a eficácia desta intervenção no tratamento de pacientes asmáticos. Este fato foi devido às diferenças metodológicas entre os estudos incluídos e à ausência de relato de aspectos metodológicos por parte da maioria dos estudos incluídos. Não há dados disponíveis em relação aos efeitos dos exercícios respiratórios nos seguintes desfechos: episódios de hospitalização, número de consultas médicas, número de faltas no trabalho devido a exacerbações da doença, e avaliação subjetiva do paciente em relação à intervenção

Caracterização estatística de processos sísmicos via Distribuição Generalizada de Pareto. Estudo de caso: João Câmara-RN

The work is to make a brief discussion of methods to estimate the parameters of the Generalized Pareto distribution (GPD). Being addressed the following techniques: Moments (moments), Maximum Likelihood (MLE), Biased Probability Weighted Moments (PWMB), Unbiased Probability Weighted Moments (PWMU), Mean Power Density Divergence (MDPD), Median (MED), Pickands (PICKANDS), Maximum Penalized Likelihood (MPLE), Maximum Goodness-of-fit (MGF) and the Maximum Entropy (POME) technique, the focus of this manuscript. By way of illustration adjustments were made for the Generalized Pareto distribution, for a sequence of earthquakes intraplacas which occurred in the city of João Câmara in the northeastern region of Brazil, which was monitored continuously for two years (1987 and 1988). It was found that the MLE and POME were the most efficient methods, giving them basically mean squared errors. Based on the threshold of 1.5 degrees was estimated the seismic risk for the city, and estimated the level of return to earthquakes of intensity 1.5°, 2.0°, 2.5°, 3.0° and the most intense earthquake never registered in the city, which occurred in November 1986 with magnitude of about 5.2º

Não vício assintótico, consistência forte e uniformemente forte de estimadores do tipo núcleo para dados direcionais sobre uma esfera unitária k-dimensional

In this work we studied the asymptotic unbiasedness, the strong and the uniform strong consistencies of a class of kernel estimators fn as an estimator of the density function f taking values on a k-dimensional sphere

Estimadores do tipo núcleo para Variávei s I.I.D. com espaço de estados geral

In this work, the paper of Campos and Dorea [3] was detailed. In that article a Kernel Estimator was applied to a sequence of random variables with general state space, which were independent and identicaly distributed. In chapter 2, the estimator´s properties such as asymptotic unbiasedness, consistency in quadratic mean, strong consistency and asymptotic normality were verified. In chapter 3, using R software, numerical experiments were developed in order to give a visual idea of the estimate process