L'educació moral a través de la literatura. El punt de vista d'Iris Murdoch

L'egoisme és, en paraules de Murdoch, l'enemic més gran de la moralitat. L'art es presenta com una de les possibilitats de treure el jo de si mateix perquè prengui consciència del món. La finalitat d'aquest article és posar de manifest la importància i també l'interès de la literatura com a vehicle de reflexió i de presa de consciència de la realitat en la que es mou l'ésser humà tal com ens ho presenta Iris Murdoch. Sota aquest punt de vista la literatura posseeix una clara funció educativa moral.

Moral Disengagement in the Legitimation and Realization of Aggressive Behaviors in Soccer and Ice Hockey

The aim of the present study was to test the effect of moral disengagement on the tolerance and realization of aggressive acts in male soccer and ice hockey players in Switzerland. One hundred and four soccer and 98 ice hockey players evaluated the legitimacy of four videotaped aggressive behaviors and completed a questionnaire that included a moral disengagement scale and self-reported aggression. The level of moral disengagement, which mediates the effects of perceived coach and ego attitudes toward transgressions, largely explains the tolerance of hostile aggression within teams, as well as the level of high aggressive acts reported by the participants.

Dynamic range extension of SiPM detectors with the time-gated operation

The silicon photomultiplier (SiPM) is a novel detector technology that has undergone a fast development in the last few years, owing to its single-photon resolution and ultra-fast response time. However, the typical high dark count rates of the sensor may prevent the detection of low intensity radiation fluxes. In this article, the time-gated operation with short active periods in the nanosecond range is proposed as a solution to reduce the number of cells fired due to noise and thus increase the dynamic range. The technique is aimed at application fields that function under a trigger command, such as gated fluorescence lifetime imaging microscopy.

Cenozoic evolution of eastern Iberia: structural data and dynamic model.

Iberia underwent intraplate deformation during the Mesozoic and Cenozoic. In eastem Ibena, compression took place during the Palaeogene and early Miocene, giving rise to the Iberian Chain, and extension started during the early Miocene in the coastal areas and the Valencia trough; during early Miocene compression continued in the western Iberian Chain whereas extension had started in the eastern Iberian Chain. From the kinematic data obtained from the major compressional and extensional structures formed dunng the Cenozoic, a simple dynamic model using Bott's (1959) formula is presented. The results show that both extension and compression may have been produced assuming a main horizontal stress-axis approximately N-S, in a similar direction that the convergence between Europe, Ibena and Afnca dunng the Cenozoic.

Partnering in the Dynamic Environment: The Role of Trust in Asymmetric Technology Partnership Formation

The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given. The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given.

Premières évidences de la validité de l'échelle de désengagement moral pour des actes discriminatoires (Initial evidence of the validity of a scale on moral disengagement in discriminatory behavior)

De nombreuses études ont mis en évidence le fait que les individus étaient prêts à commettre des actes discriminatoires pour autant qu'ils puissent les justifier (Crandall & Eshleman, 2003). Nous proposons de contribuer à la compréhension de ce phénomène grâce au concept de désengagement moral pour des actes discriminatoires (DMD). Nous définissons le désengagement moral comme le fait de justifier ses propres actes immoraux de manière à les rendre acceptable. Ce concept trouve ses origines dans les travaux de Bandura et al. (1996) portant sur les comportements agressifs chez des enfants. Il se compose de huit mécanismes (p.ex. le déplacement de responsabilité). Notre recherche dépasse le cadre théorique développé par Bandura et al. pour inscrire le désengagement moral dans le champ de la discrimination intergroupe. De plus, en conceptualisant le désengagement moral comme une différence individuelle, nous proposons également de présenter les premières étapes du développement d'une échelle permettant de mesurer le DMD. L'échelle de DMD a été développée en trois étapes en suivant la procédure proposée par Hinkin (1998). Tout d'abord, une liste de 72 items a été générée suivant une méthode déductive. Puis, suite à une étude (n = 13) portant sur la cohérence des items vis-à-vis du concept et de ses mécanismes, cette liste a été réduite à 40 items (5 par mécanisme). Enfin, 118 étudiants universitaires ont participé à une étude dans le but de mener des analyses factorielles (exploratoire et confirmatoire), ainsi que de tester les validités convergente, divergente et prédictive de l'échelle. La première partie de cette étude se composait de différentes échelles (p.ex. mesure de personnalité, préjugés anti-immigrés, etc.). La seconde partie de l'étude était une expérience portant sur l'évaluation d'idées de méthodes de sélection (discriminatoire versus méritocratique) des étudiants suisses et étrangers à l'université, ayant pour but de réduire la surpopulation dans les salles de cours. Les résultats obtenus sont prometteurs pour le développement de l'échelle, autant du point de vue de sa structure (p.ex. α = .82) que de sa validité. Par exemple, plus le niveau de DMD des participants était élevé, plus ils étaient favorables à une méthode de sélection discriminatoire des étudiants à l'université. L'ensemble des résultats sera présenté durant la conférence. Nous discuterons également des potentielles contributions de cette échelle pour de futurs projets de recherche. Référence : Bandura, A., Barbaranelli, C., Caprara, G. V., & Pastorelli, C. (1996). Mechanisms of moral disengagement of the exercise of moral agency. Journal of Personality and Social Psychology, 71 (2), 364-374. Crandall, C. S., & Eshleman, A. (2003). The Justification-suppression model of the expression and experience of prejudice. Psychological Bulletin, 129 (3), 414-446. Hinkin, T. R. (1998). A brief tutorial on the development of measures for use un survey questionnaires. Organizational Research Methods, 1 (1), 104.121.

Moral disengagement: Towards a context-general category-based measure of the concept

Bandura (1986) developed the concept of moral disengagement to explain how individuals can engage in detrimental behavior while experiencing low levels of negative feelings such as guilt-feelings. Most of the research conducted on moral disengagement investigated this concept as a global concept (e.g., Bandura, Barbaranelli, Caprara, & Pastorelli, 1996; Moore, Detert, Klebe Treviño, Baker, & Mayer, 2012) while Bandura (1986, 1990) initially developed eight distinct mechanisms of moral disengagement grouped into four categories representing the various means through which moral disengagement can operate. In our work, we propose to develop measures of this concept based on its categories, namely rightness of actions, rejection of personal responsibility, distortion of negative consequences, and negative perception of the victims, and which is not specific a particular area of research. Through our measures, we aim at better understanding the cognitive process leading individuals to behave unethically by investigating which category plays a role in explaining unethical behavior depending on the situations in which individuals are. To this purpose, we conducted five studies to develop the measures and to test its predictive validity. Particularly, we assessed the ability of the newly developed measures to predict two types of unethical behaviors, i.e. discriminatory behavior and cheating behavior. Confirmatory Factor analyses demonstrated a good fit of the model and findings generally supported our predictions.

Causality and contagion in peripheral EMU public debt markets: a dynamic approach

Our research aims to analyze the causal relationships in the behavior of public debt issued by peripheral member countries of the European Economic and Monetary Union -EMU-, with special emphasis on the recent episodes of crisis triggered in the eurozone sovereign debt markets since 2009. With this goal in mind, we make use of a database of daily frequency of yields on 10-year government bonds issued by five EMU countries -Greece, Ireland, Italy, Portugal and Spain-, covering the entire history of the EMU from its inception on 1 January 1999 until 31 December 2010. In the first step, we explore the pair-wise causal relationship between yields, both for the whole sample and for changing subsamples of the data, in order to capture the possible time-varying causal relationship. This approach allows us to detect episodes of contagion between yields on bonds issued by different countries. In the second step, we study the determinants of these contagion episodes, analyzing the role played by different factors, paying special attention to instruments that capture the total national debt -domestic and foreign- in each country.

Engineering Geology for Society and Territory: volume 2: landslide processes

This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, runout and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches.

Flexible Multibody Simulation Approach in the Dynamic Analysis of Bone Strains Activity

The objective of this study is to show that bone strains due to dynamic mechanical loading during physical activity can be analysed using the flexible multibody simulation approach. Strains within the bone tissue play a major role in bone (re)modeling. Based on previous studies, it has been shown that dynamic loading seems to be more important for bone (re)modeling than static loading. The finite element method has been used previously to assess bone strains. However, the finite element method may be limited to static analysis of bone strains due to the expensive computation required for dynamic analysis, especially for a biomechanical system consisting of several bodies. Further, in vivo implementation of strain gauges on the surfaces of bone has been used previously in order to quantify the mechanical loading environment of the skeleton. However, in vivo strain measurement requires invasive methodology, which is challenging and limited to certain regions of superficial bones only, such as the anterior surface of the tibia. In this study, an alternative numerical approach to analyzing in vivo strains, based on the flexible multibody simulation approach, is proposed. In order to investigate the reliability of the proposed approach, three 3-dimensional musculoskeletal models where the right tibia is assumed to be flexible, are used as demonstration examples. The models are employed in a forward dynamics simulation in order to predict the tibial strains during walking on a level exercise. The flexible tibial model is developed using the actual geometry of the subject’s tibia, which is obtained from 3 dimensional reconstruction of Magnetic Resonance Images. Inverse dynamics simulation based on motion capture data obtained from walking at a constant velocity is used to calculate the desired contraction trajectory for each muscle. In the forward dynamics simulation, a proportional derivative servo controller is used to calculate each muscle force required to reproduce the motion, based on the desired muscle contraction trajectory obtained from the inverse dynamics simulation. Experimental measurements are used to verify the models and check the accuracy of the models in replicating the realistic mechanical loading environment measured from the walking test. The predicted strain results by the models show consistency with literature-based in vivo strain measurements. In conclusion, the non-invasive flexible multibody simulation approach may be used as a surrogate for experimental bone strain measurement, and thus be of use in detailed strain estimation of bones in different applications. Consequently, the information obtained from the present approach might be useful in clinical applications, including optimizing implant design and devising exercises to prevent bone fragility, accelerate fracture healing and reduce osteoporotic bone loss.