Cutting forces and wear analysis of Si3N4 diamond coated tools in high speed machining

Si3N4 tools were coated with a thin diamond film using a Hot-Filament Chemical Vapour Deposition (HFCVD) reactor, in order to machining a grey cast iron. Wear behaviour of these tools in high speed machining was the main subject of this work. Turning tests were performed with a combination of cutting speeds of 500, 700 and 900 m min−1, and feed rates of 0.1, 0.25 and 0.4 mm rot−1, remaining constant the depth of cut of 1 mm. In order to evaluate the tool behaviour during the turning tests, cutting forces were analyzed being verified a significant increase with feed rate. Diamond film removal occurred for the most severe set of cutting parameters. It was also observed the adhesion of iron and manganese from the workpiece to the tool. Tests were performed on a CNC lathe provided with a 3-axis dynamometer. Results were collected and registered by homemade software. Tool wear analysis was achieved by a Scanning Electron Microscope (SEM) provided with an X-ray Energy Dispersive Spectroscopy (EDS) system. Surface analysis was performed by a profilometer.

Chiroptical and emissive properties of a calix[4]arene-containing chiral poly (P-phenylene ethynylene) with enantioselective recognition ability

Supramolecular chirality was achieved in solutions and thin films of a calixarene-containing chiral aryleneethynylene copolymer. The observed chiroptical activity, which is primarily allied with the formation of aggregates of high molecular weight polymer chains, is the result of a combination of intrachain and interchain effects. The former arises by the adoption of an induced helix-sense by the polymer main-chain while the latter comes from the exciton coupling of aromatic backbone transitions. The co-existence of bulky bis-calixKlarene units and chiral side-chains on the polymer skeleton prevents efficient pi-stacking of neighbouring chains, keeping the chiral assembly highly emissive. In contrast, for a model polymer lacking calixarene moieties, the chiroptical activity is dominated by strong interchain exciton couplings as a result of more favourable packing of polymer chains, leading to a marked decrease of photoluminescence in the aggregate state. The enantiomeric recognition abilities of both polymers towards (R)- and (S)-alpha-methylbenzylamine were examined. It was found that a significant enantiodiscrimination is exhibited by the calixarene-based polymer in the aggregate state.

Replication in distributed systems using IEC 61499 standard

The international Electrotechnical Commission (IEC) 61499 architecture incorporated several function block with which distributed control application may be developed, and how these are interpreted and executed. However, due the distributed nature of the control applications, many issues also need to be taken into account. Most of these are due to the new error model and failure modes of the distributed hardware on which the distributed application is executed and also due the incomplete standards definition of the execution models. IEC 61499 frameworks does not clarify how to handle with replication of software and hardware components. In this paper we propose a replication model for IEC 61499 applications and which mechanisms and protocols may be used for their support.

Drilling process of composite laminates – a tool based analysis

“Drilling of polymeric matrix composites structures”

A remote engineering solution for automating a roller hearth kiln

Remote engineering (also known as online engineering) may be defined as a combination of control engineering and telematics. In this area, specific activities require computacional skills in order to develop projects where electrical devives are monitored and / or controlled, in an intercative way, through a distributed network (e.g. Intranet or Internet). In our specific case, we will be dealing with an industrial plant. Within the last few years, there has been an increase in the number of activities related to remote engineering, which may be connected to the phenomenon of the large extension experienced by the Internet (e.g. bandwith, number of users, development tools, etc.). This increase opens new and future possibilities to the implementation of advance teleworking (or e-working) positions. In this paper we present the architecture for a remote application, accessible through the Internet, able to monitor and control a roller hearth kiln, used in a ceramics industry for firing materials. The proposed architecture is based on a micro web server, whose main function is to monitor and control the firing process, by reading the data from a series of temperature sensors and by controlling a series of electronic valves and servo motors. This solution is also intended to be a low-cost alternative to other potential solutions. The temperature readings are obtained through K-type thermopairs and the gas flow is controlled through electrovalves. As the firing process should not be stopped before its complete end, the system is equipped with a safety device for that specific purpose. For better understanding the system to be automated and its operation we decided to develop a scale model (100:1) and experiment on it the devised solution, based on a Micro Web Server.

Micro – and nanofibers and liquid crystals for ligth-scattering shutters: Simulation of electrp-optical properties

This work demonstrates the feasibility of using polymeric micro- and nanofiber-composed films and liquid crystals as electrically switchable scattering light shutters. We present a concept of electro-optic device based on an innovative combination of two mature technologies: optics of nematic liquid crystals and electrospinning of nanofibers. These devices have electric and optical characteristics far superior to other comparable methods. The simulation presented shows results that are highly consistent with those of experiments and that explain the working mechanism of the devices.

Mousetrapping: the ordeals of interpretation

Tese de doutoramento, Estudos Literários (Teoria da Literatura), Universidade de Lisboa, Faculdade de Letras, 2012

Response rate in the Study of Cardiovascular Risks in Adolescents – ERICA

ABSTRACT OBJECTIVE To describe the response rate and characteristics of people who either took part or not in from the Study of Cardiovascular Risks in Adolescents (ERICA) , according to information subsets. METHODS ERICA is a school-based, nation-wide investigation with a representative sample of 12 to 17-year-old adolescents attending public or private schools in municipalities with over 100,000 inhabitants in Brazil. Response rate of eligible subjects were calculated according to macro-regions, sex, age, and type of school (public or private). We also calculated the percentages of replacement schools in comparison with the ones originally selected as per the sample design, according to the types of schools in the macro-regions. The subjects and non-subjects were compared according to sex, age, and average body mass indices (kg/m2). RESULTS We had 102,327 eligible adolescents enrolled in the groups drawn. The highest percentage of complete information was obtained for the subset of the questionnaire (72.9%). Complete information regarding anthropometric measurements and the ones from the questionnaire were obtained for 72.0% of the adolescents, and the combination of these data with the 24-hour dietary recall were obtained for 70.3% of the adolescents. Complete information from the questionnaire plus biochemical blood evaluation data were obtained for 52.5% of the morning session adolescents (selected for blood tests). The response percentage in private schools was higher than the one in public schools for most of the combination of information. The ratio of older and male adolescents non-participants was higher than the ratio among participants. CONCLUSIONS The response rate for non-invasive procedures was high. The response rate for blood collection – an invasive procedure that requires a 12-hour fasting period and the informed consent form from legal guardians – was lower. The response rate observed in public schools was lower than in the private ones, and that may reflect lower school frequency of registered students.

Modifications of MCM-22 zeolite through sequential post-synthesis treatments. Implications on the acidic and catalytic behaviour

Desilication and a combination of alkaline followed by acid treatment were applied to MCM-22 zeolite using two different base concentrations. The samples were characterised by powder X-ray diffraction, Al-27 and Si-29 MAS-NMR spectroscopy, SEM, TEM and low temperature N-2 adsorption. The acidity of the samples was study through pyridine adsorption followed by FTIR spectroscopy and by the analyses of the hydroxyl region. The catalytic behaviour, anticipated by the effect of post-synthesis treatments on the acidity and space available inside the two internal pore systems was evaluated by using the model reaction of m-xylene transformation. The generation of mesoporosity was achieved upon alkaline treatment with 0.05 M NaOH solution and practically no additional gain was obtained when the more concentrate solution, 0.1 M, was used. Instead, Al extraction takes place along with Si, as shown by Si-29 and Al-27 MAS-NMR data, followed by Al deposition as extraframework species. Samples submitted to alkaline plus acid treatments present distinct behaviour. When the lowest NaOH solution was used no relevant effect was observed on the textural characteristics. Additionally, when the acid treatment was performed on an already fragilized MCM-22 structure, due to previous desilication with 0.1 M NaOH solution, the extraction of Al from both internal pore systems promotes their interconnection, evolving from a 2-D to a 3-D porous structure. This transformation has a marked effect in the catalytic behaviour, allowing an increase of m-xylene conversion as a consequence of an easier and faster molecular traffic in the 3-D structure. On the other hand, the continuous deposition of extraframework Al species inside the pores leads to a shape selective effect that privileges the formation of the more valuable isomer p-xylene.

In vitro susceptibility of Paracoccidioides brasiliensis yeast form to antifungal agents

A study was conducted to determine the susceptibility of P. brasiliensis yeast form to amphotericin B (A), ketoconazole (K), 5-fluorocytosine (5-FC) and rifampin (R). The three isolates tested produced minimal inhibitory concentrations (MICs) (mcg/ml) in the following range: A: 0.09-0.18; K: 0.001-0.007; 5-FC: 62.5-250 and R: 40-80. The minimal fungicidal concentrations (MFC) were several times higher than the corresponding MICs. Precise MFC for 5-FC were not obtained (> 500 mcg/ml). Combination of K plus A proved synergic, with the fractional inhibitory concentration (FIC) indices revealing synergy when the drugs were combined at the 1 to 1 and 1 to 5 MIC ratios. R (40 mcg/ml) appeared to antagonize K. These results indicate promise for the combined use of K plus A as a therapeutical regimen.

Wetland Habitat Studies using various Classification Techniques on Multi-Spectral Landsat Imagery: Case study: Tram chim National Park, Dong Thap Vietnam

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies

Influence of constraining and confinement in the molecular mobility of low molecular weight materials

Dissertation presented to obtain a Ph.D. Degree in Chemical Physics

Radiometric studies on the oxidation of (1-14c) fatty acids by drug-susceptible and drug-resistant mycobacteria

A radiometric assay system has been used to study oxidation patterns of (1-14C) fatty acids by drug-susceptible and drug-resistant organisms of the genus Mycobacterium. Two strains of M. tuberculosis susceptible to all drugs, H37Rv and Erdman, were used. Drug-resistant organisms included in this investigation were M. tuberculosis H37Rv resistant to 5 ug/ml isoniazid, M. bovis, M. avium, M. intracellular, M. kansasii and M. chelonei. The organisms were inoculated in sterile reaction vials containing liquid 7H9 medium, 10% ADC enrichment and 1.0 uCi of one of the (1-14C) fatty acids (butyric, hexánoic, octanoic, decanoic, lauric, myristic, palmitic, stearic, oleic, linoleic, linolenic). Vials were incubated at 37°C and the 14CO2 envolved was measured daily for 3 days with a Bactec R-301 instrument. Although each individual organism displayed a different pattern of fatty oxidation, these patterns were not distinctive enough for identification of the organism. No combination of fatty acids nor preferential oxidation of long chain or of short chain fatty acids were able to separate susceptible from resistant organisms. Further investigation with a larger number of drug susceptible mycobacteria including assimilation studies and oxidation of other substrates may be required to achieve a distinction between drug-susceptible and drug-resistant mycobacteria.

Radiometric studies on the oxidation of (U-14C) L-amino acids by drug-susceptible and drug-resistant mycobacteria

A radiometric assay system has been used to study oxidation patterns of (U-14C) L-amino acids by drug-susceptible and drug-resistant mycobacteria. Drug-susceptible M. tuberculosis (H37Rv TMC 102 and Erdman) along with the drug-resistant organism M. tuberculosis (H37 Rv TMC 303), M. bovis, M. avium, M. intracellulare, M. kansasii and M. chelonei were used. The organisms were inoculated into a sterile reaction system with liquid 7H9 medium and one of the (U-14C) L-amino acids. Each organism displayed a different pattern of amino acid oxidation, but these patterns were not distinctive enough for identification of the organism. Complex amino acids such as proline, phenylalanine and tyrosine were of no use in identification of mycobacteria, since virtually all organisms failed to oxidize them. There was no combination of substrates able to separate susceptible from resistant organisms.

Geography of the Information Society

All every day activities take place in space. And it is upon this that all information and knowledge revolve. The latter are the key elements in the organisation of territories. Their creation, use and distribution should therefore occur in a balanced way throughout the whole territory in order to allow all individuals to participate in an egalitarian society, in which the flow of knowledge can take precedence over the flow of interests. The information society depends, to a large extent, on the technological capacity to disseminate information and, consequently, the knowledge throughout territory, thereby creating conditions which allow a more balanced development, from the both the social and economic points of view thus avoiding the existence of info-exclusion territories. Internet should therefore be considered more than a mere technology, given that its importance goes well beyond the frontiers of culture and society. It is already a part of daily life and of the new forms of thinking and transmitting information, thus making it a basic necessity essential, for a full socio-economic development. Its role as a platform of creation and distribution of content is regarded as an indispensable element for education in today’s society, since it makes information a much more easily acquired benefit.”…in the same way that the new technologies of generation and distribution of energy allowed factories and large companies to establish themselves as the organisational bases of industrial society, so the internet today constitutes the technological base of the organisational form that characterises the Information Era: the network” (CASTELLS, 2004:15). The changes taking place today in regional and urban structures are increasingly more evident due to a combination of factors such as faster means of transport, more efficient telecommunications and other cheaper and more advanced technologies of information and knowledge. Although their impact on society is obvious, society itself also has a strong influence on the evolution of these technologies. And although physical distance has lost much of the responsibility it had towards explaining particular phenomena of the economy and of society, other aspects such as telecommunications, new forms of mobility, the networks of innovation, the internet, cyberspace, etc., have become more important, and are the subject of study and profound analysis. The science of geographical information, allows, in a much more rigorous way, the analysis of problems thus integrating in a much more balanced way, the concepts of place, of space and of time. Among the traditional disciplines that have already found their place in this process of research and analysis, we can give special attention to a geography of new spaces, which, while not being a geography of ‘innovation’, nor of the ‘Internet’, nor even ‘virtual’, which can be defined as one of the ‘Information Society’, encompassing not only the technological aspects but also including a socio-economic approach. According to the last European statistical data, Portugal shows a deficit in terms of information and knowledge dissemination among its European partners. Some of the causes are very well identified - low levels of scholarship, weak investments on innovation and R&D (both private and public sector) - but others seem to be hidden behind socio-economical and technological factors. So, the justification of Portugal as the case study appeared naturally, on a difficult quest to find the major causes to territorial asymmetries. The substantial amount of data needed for this work was very difficult to obtain and for the islands of Madeira and Azores was insufficient, so only Continental Portugal was considered for this study. In an effort to understand the various aspects of the Geography of the Information Society and bearing in mind the increasing generalised use of information technologies together with the range of technologies available for the dissemination of information, it is important to: (i) Reflect on the geography of the new socio-technological spaces. (ii) Evaluate the potential for the dissemination of information and knowledge through the selection of variables that allow us to determine the dynamic of a given territory or region; (iii) Define a Geography of the Information Society in Continental Portugal.