Surface roughness analysis of dental ceramics treated with hydrofl uoric acid and aluminum oxide jet

The aim of this study was to evaluate the surface roughness of 5 indirect restorative materials treated with hydrofluoric acid to 10%, with aluminum oxide jet and a combination of both. The specimens was prepared with 10 mm in diameter and 2 mm thickness, divided into fi ve groups: (1) Ceromer (CeseadII-Kuraray), (2) Leucite crystals ceramics (IPS EmpressIIIvoclarforcasket), (3) glass ceramic with fluorapatite (IPS D. Sign-Ivoclar), (4) lithium disilicate ceramic (IPS Empress II-Ivoclar restorations), (5) ceramics (Cergogold-Degussa). For all groups were performed the controls, and the surfaces with the 3 types of treatment. For testing roughness used the rugosimeter Taylor/Hobson-Precision, model form tracerSV-C525 high sensitivity. After confi rmation of variance analysis with a signifi cance level of 1% (p < 0.01), there was equality between the average roughness of materials from groups 1, 3 and 5, and the group 2 was different from the others. It was also found that the ceramics of the group 5 behaved similar to group 4. However the lowest average roughness was observed in group 2 ceramic. In the evaluation between the types of treatment, the aluminum oxide jet and associations and blasting with hydrofl uoric acid were similar, and different isolated hydrofl uoric acid, and 3 types of treatment signifi cantly higher than the control group. All treatments promoted superfi cial alterations in all tested materials.

In-Office dental bleaching efficacy assessment in function of the light exposure regime by digital colometric reflectance spectroscopy

In-office dental bleaching has been subject of several studies. Generally those studies quantify through visual analysis, the shade reduction of the teeth submitted to different bleaching protocols (light sources, bleaching agent concentrations and irradiation time). The objective of this work is the determination of the influence of four irradiation protocols on the obtainment of better aesthetic results using a colorimetric spectrophotometer that quantifies color changes in each situation imposed. Forty bovine incisors were selected in function of similar anatomic characteristics; a concentrated coffee solution was used to stain the teeth. A commercial spectrophotometer was used to measure the color changes during evolution of the experiment (stain and bleaching phases) and the obtained data was analyzed by the ANOVA test. The obtained data showed the evolution of teeth color during the staining period, as well as, the color reduction that each bleaching protocol achieved. Based on our findings it is possible to conclude that bleaching protocols with larger irradiation periods did not showed significant differences when compared with shorter irradiation protocols, in that way the use of protocols with 30 min or more of consecutive irradiation are not clinically justified and also can cause several side effects.

Thermal and structural properties of commercial dental resins light-cured with blue emitting diodes (LEDs)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of dental restorations: a comparative study between clinical and digital photographic assessments

The aim of this study was to compare the efficacy of a direct clinical evaluation method with an indirect digital photographic method in assessing the quality of dental restorations. Seven parameters (color, occlusal marginal adaptation, anatomy form, roughness, occlusal marginal stain, luster, and secondary caries) were assessed in 89 Class I and Class II restorations from 36 adults using the modified US Public Health Service/Ryge criteria. Standardized photographs of the same restorations were digitally processed by Adobe Photoshop software, separated into the following four groups and assessed by two calibrated examiners: Group A: The original photograph displayed at 100%, without modifications (IMG100); Group B: Formed by images enlarged at 150% (IMG150); Group C: Formed by digital photographs displayed at 100% (mIMG100), with digital modifications (levels adjustment, shadow and highlight correction, color balance, unsharp Mask); and Group D: Formed by enlarged photographs displayed at 150% with modifications (mIMG150), with the same adjustments made to Group C. Photographs were assessed on a calibrated screen (Macbook) by two calibrated clinicians, and the results were statistically analyzed using Wilcoxon tests (SSPS 11.5) at 95% CI. Results: The photographic method produced higher reliability levels than the direct clinical method in all parameters. The evaluation of digital images is more consistent with clinical assessment when restorations present some moderate defect (Bravo) and less consistent when restorations are clinically classified as either satisfactory (Alpha) or in cases of severe defects (Charlie). Conclusion: The digital photographic method is a useful tool for assessing the quality of dental restorations, providing information that goes unnoticed with the visual-tactile clinical examination method. Additionally, when analyzing restorations using the Ryge modified criteria, the digital photographic method reveals a significant increase of defects compared to those clinically observed with the naked eye. Photography by itself, without the need for enlargement or correction, provides more information than clinical examination and can lead to unnecessary overtreatment.

ScanWhite©: método objetivo para avaliação do nível de clareamento dental

A comparação visual com escalas de cor, universalmente empregada para avaliar o resultado das diferentes substâncias, técnicas e aparelhos utilizados no clareamento dental, tem se mostrado um método limitado, questionável, subjetivo e pouco confiável. Os métodos instrumentais, que utilizam espectroscópios ou imagens digitais, têm se mostrado mais adequados por oferecerem avaliações objetivas, maior reprodutibilidade e confiabilidade. Neste artigo, serão apresentados e discutidos os resultados obtidos com a utilização do ScanWhite© ? software para avaliação objetiva do nível de clareamento dental e apoio à decisão clínica, que baseia sua avaliação no processamento computacional de imagens digitais. Esse tem como principais diferenciais: (1) algoritmo calibrador para compensar as variações de luminosidade do ambiente, (2) apresentação dos resultados em valores numéricos e através do gráfico de evolução do clareamento dental, (3) interface intuitiva e facilidade de uso, (4) determinação dos índices de apoio à decisão (IPS ? índice de possibilidade de sucesso, e IRS ? índice de risco de sensibilidade antes do início do tratamento) e (5) emissão de relatório geral, autorizações e recomendações pós-clareamento.

Conhecimento de cárie dental e doença periodontal de professores do ensino fundamental segundo o tipo de instituição (pública ou privada)

Aim: observe the knowledge of dental caries and periodontal disease of primary schoolteachers, according to type of institution (public and private) from Araraquara city. methodology: for that participants were 113 teachers from public schools and 57 from private schools. The instrument of analysis was based on a questionnaire with closed and open questions concerning the etiology, prevention and development of dental caries and periodontal disease. Results: 97,3% of public ́s schoolteachers and 91,2% of private ́s schoolteachers answered that they knows what is dental caries, but they didn ́t answer correctly about the caries etiology as being multifactorial and about methods of prevention. Both of schoolteachers (public and private) had more sucessful when answered about bacterial plaque than periodontal disease and yours manifestation. Conclusion: the dental knowledge of schoolteachers in public and private school was evaluated and limited educational programs should be directed to both public and private schoolteachers, in order to increase the level of dental knowledge of them, so that they can act as educational agents with the children.

Musculoskeletal disorders in upper limbs in dental students: exposure level to risk factors

Aim: This study assessed the risk factors of undergraduate students to develop musculoskeletal disorders (MSD) in the upper limbs, regarding gender, type of dental clinical procedure, mouth region treated, and the four-handed dentistry practice. Methods: Dental students enrolled in the 8th semester in the Araraquara School of Dentistry, UNESP, Brazil, were photographed while practicing 283 dental procedures. The Rapid Upper Limb Assessment (RULA) method was used to evaluate the working postures of each student. The photographs were evaluated and a final risk score was attributed to each analyzed procedure. The prevalence of risk factors of developing MSD was estimated by point and by 95% confidence interval. The association between the risk factor of developing disorders and variables of interest were assessed by the chi-square test with a significance level of 5%. Results: The risk factors of developing MSD were high, regarding most dental procedures performed by the undergraduate students (score 5: 7.07%, CI95%: 4.08- 10.06%; score 6: 62.54%, CI95%: 56.90-68.18%). There was no significant association between the RULA final score and gender (p=0.559), and type of dental procedure (p=0.205), and mouth regions by arch (p=0.110) or hemi-arch (p=0.560), and the use of four-handed dentistry (p=0.366). Conclusions: It can be concluded that gender, type of dental clinical procedure, mouth region treated, and practice of four-handed dentistry did not influence the risk of developing MSD in the upper limbs among the dental students evaluated; however, they are at a high risk of developing such disorders.

Dental anxiety: prevalence and evaluation of psychometric properties of a scale

Aim: To estimate the reliability and validity of the Dental Anxiety Scale (DAS) and identify the prevalence and the effect of the socio-demographic characteristics of dental anxiety, in a sample of 212 adults. Methods: The psychometric sensitivity of the scale was assessed. A confirmatory factor analysis was performed, and the convergent validity and internal consistency were determined. The prevalence of anxiety was estimated, and the effect of socio-demographic variables on anxiety was assessed using structural equation modelling. Results: The participants’ mean age was 33.5 (SD = 15.6) years, and 62.3% were female. There was an adequate factorial adjustment of the scale in this sample. The convergent validity and internal consistency were adequate in the one-factor model. Regarding two-factor model, there was a high correlation (r) among the factors, which jeopardized the discriminant validity. A total of 47.6% of the participants (IC95% = 40.9 - 54.4) presented low levels of anxiety, 32.5% (IC95% = 26.2 - 38.9) moderate levels, and 12.3% (IC95% = 7.8 - 16.7) exacerbated levels. There was a non-significant effect of gender, age and education on the anxiety levels of this sample. Conclusion: We concluded that the one-factor model presented better psychometric qualities, that anxiety was highly prevalent and there was no significant effect of the demographic variables on anxiety, in this sample

Risk muskuloskeletal disorders in upper limbs in dental students: concordance of different methods for estimation of body angle

The purpose of this paper was to evaluate the agreement among different methods used to estimate angular deviation of the body to determine the risk for development of upper limb musculoskeletal disorders in dentistry undergraduates. Materials and Methods: Students (n = 79) enrolled in the final year undergraduate course of the Araraquara School of Dentistry-Sγo Paulo State University-UNESP were evaluated. Photographs were taken of students performing clinical procedures. The work postures adopted by each student were evaluated by means of rapid upper limb assessment (RULA). The basis used to obtain the individual's final risk score is the measurement of the angular deviations in the neutral positions of the regions evaluated. Two methods were used to estimate the angular deviation of the body: Visual exam and Image Tool software. A RULA final risk score was attributed to each procedure the student performed (n = 333). Study of the agreement between the methods about risk of musculoskeletal disorders was conducted by means of Kappa (κ) statistics. The level of significance adopted was 5%. Results: Fair agreement (κ = 0.32) between the evaluated methods was verified. Conclusion: The risk for development of upper limb musculoskeletal disorders by dentistry undergraduates evaluated by using RULA was not in agreement with the results obtained by use of visual exam and Image Tool.

Risk of musculoskeletal disorders in upper limbs in dental students: concordance of different methods for estimation of body angle

The purpose of this paper was to evaluate the agreement among different methods used to estimate angular deviation of the body to determine the risk for development of upper limb musculoskeletal disorders in dentistry undergraduates. Materials and Methods: Students (n = 79) enrolled in the final year undergraduate course of the Araraquara School of Dentistry-Sγo Paulo State University-UNESP were evaluated. Photographs were taken of students performing clinical procedures. The work postures adopted by each student were evaluated by means of rapid upper limb assessment (RULA). The basis used to obtain the individual's final risk score is the measurement of the angular deviations in the neutral positions of the regions evaluated. Two methods were used to estimate the angular deviation of the body: Visual exam and Image Tool software. A RULA final risk score was attributed to each procedure the student performed (n = 333). Study of the agreement between the methods about risk of musculoskeletal disorders was conducted by means of Kappa (κ) statistics. The level of significance adopted was 5%. Results: Fair agreement (κ = 0.32) between the evaluated methods was verified. Conclusion: The risk for development of upper limb musculoskeletal disorders by dentistry undergraduates evaluated by using RULA was not in agreement with the results obtained by use of visual exam and Image Tool.

Chemical and morphological features of dental composite resin: influence of light curing units and immersion media

Aims: The study evaluated the influence of light curing units and immersionmedia on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M)through the EDX analysis and SEM evaluation. Light curing units with different power densitiesand mode of application used were XL 3000 (480 mW/cm2), Jet Lite 4000 Plus (1230mW/cm2), andUltralume Led 5 (790 mW/cm2) and immersion media were artificial saliva, Coke1, tea and coffee,totaling 12 experimental groups. Specimens (10 mm 3 2 mm) were immersed in each respectivesolution for 5 min, three times a day, during 60 days and stored in artificial saliva at 378C 6 18Cbetween immersion periods. Topography and chemical analysis was qualitative. Findings: Groupsimmersed in artificial saliva, showed homogeneous degradation of matrix and deposition of calciumat the material surface. Regarding coffee, there was a reasonable chemical degradation with loss ofload particles and deposition of ions. For tea, superficial degradation occurred in specific areaswith deposition of calcium, carbon, potassium and phosphorus. For Coke1, excessive matrix degra-dation and loss of load particles with deposition of calcium, sodium, and potassium. Conclusion:Light curing units did not influence the superficial morphology of composite resin tested, but theimmersion beverages did. Coke1affected material’s surface more than did the other tested drinks.Microsc. Res. Tech. 73:176–181, 2010.

Perception of Risk of Musculoskeletal Disorders Among Brazilian Dental Students

The aim of this study was to compare the mean scores of perceived risk factors for the development of musculoskeletal disorders in dental students presently pursuing work/study, according to gender, course series, and the presence of pain/discomfort. The participants were 348 students from the undergraduate course in dentistry at a Brazilian public university. The instrument on work-related factors that could contribute to osteomuscular symptoms and part of the Nordic questionnaire were used. The psychometric properties of the first instrument were estimated. A multivariate analysis of variance (MANOVA) revealed that the instrument had a tri-factorial structure (s2 retained: 62.72 percent). The retained factors were repetitiveness, work posture, and external factors. The internal consistency and reproducibility were adequate (α=0.746 to 0.873; p=0.729 to 0.940). Lower mean scores of perceived external factors were observed for the male participants, as well as lower scores in the three dimensions of the instrument for first-year students of the course and for those who did not report pain/discomfort in the neck, feet, and ankles. The authors concluded that the perception of risk factors for musculoskeletal disorders reported in the work/study environment of dental students was significantly related to gender, the course series, and the presence of pain/discomfort.

Individual and contextual factors related to dental caries in underprivileged Brazilian adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quality of life and socio-dental impact among underprivileged brazilian adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Portland cement use in dental root perforations: a long term followup

Root canal and furcal perforations are causes of endodontic therapy failure and different materials that stimulate tissue mineralization have been proposed for perforation treatment. In the first case, a patient presented tooth 46 with unsatisfactory endodontic treatment and a periapical radiographic lesion. A radiolucent area compatible with a perforating internal resorption cavity was found in the mesial root. The granulation tissue was removed, and root canals were prepared. The intracanal medication was composed of calcium hydroxide and the perforation cavity was filled with Portland cement. The 11-year followup showed radiographic repair of the tissue adjacent to the perforation and absence of clinical signs and symptoms or periapical lesion. In the second case, a patient presented with edema on the buccal surface of tooth 46. The examination showed a radiolucent area in the furcation region compatible with an iatrogenic perforation cavity. The mesial root canals were calcified, and only the distal root canal was prepared. The cavity was filled with a calcium hydroxide-based paste and the distal root canal was obturated. In sequence, the perforation cavity was filled with Portland cement. The 9-year followup showed the tooth in masticatory function with radiographic and clinical aspects compatible with normality.