Potencial de lixiviação de herbicidas utilizados na cana-de-açúcar em solos contrastantes

The increased use of herbicides, coupled with inadequate use of these molecules, also increased concerns about the risks of environmental contamination and its effects on humans and animals. The objective of this work evaluates the potential for leaching of herbicides in the crop of cane sugar, in contrasting soils. Used samples were used Psament (NR - sandy texture) and Oxisol Red (LR - clay texture). After application of herbicides ametryne (NR 1.60 kg ha(-1) and LR 2.40 kg ha(-1)), clomazone (NR 0.90 kg ha(-1) and LR 1.10 kg ha(-1)) and diuron (NR 1.60 kg ha(-1) and LR 3.20 kg ha(-1)), were irrigated blades of 0, 20, 40, 60, 80 and 100 mm of water in soil columns. Results indicate that ametryne in NR samples submitted to the handling layer of 5-10 cm when applied blades of 20 and 40 mm of water. It was evident that the clomazone, regardless of the soil, did not exceed 0-5 cm water depths of 0 to 20 mm of water and 5-10 cm deep in the blades above 40 mm of water. With blades up to 80 mm, the diuron leaching only in layers 0-5 cm deep in LR. Conclude that the potential of leaching of diuron and ametryne was influenced by soil texture together with the organic matter content, the same was not true for clomazone.

Efeito do jejum sobre o desempenho zootécnico, crescimento e degradação muscular e alterações hepáticas de juvenis de pacu Piaractus mesopotamicus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Eficácia de herbicidas aplicados em pré-plantio incorporado na cultura da cana-de-açúcar

Pós-graduação em Agronomia - FEIS

Degradação de geomembranas de polietileno de alta densidade (HDPE) após exposição à intempérie e lixívia

This paper presents some results of MFI and OIT tests performed on HDPE geomembranes of 0,8 and 2,5 mm that were exposed to weathering effects and leachate after 30 months (2,5 years). The aim of this work is the evaluation of the oxidative degradation process by comparison of fresh and exposed samples results. The expositing and tests were performed according the following standards recommendations: ASTM D1435 (weathering), ASTM D5747 e D5322 (leachate), ASTM D1238 (MFI) e D3895 (OIT). The results shows, for instance, that the MFI values presented high increases on the HDPE (2.5 mm) showing that polymeric chain break occurred for both exposures and, therefore, oxidative degradation. Concerning the OIT values all the geomembranes presented very low values even in the fresh samples. This demonstrates that there wasn’t an antioxidant package appropriate for these membranes.

Manejo de azevém (Lolium multiflorum Lam.) resistente ao glyphosate com o uso de diferentes herbicidas

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Seletividade dos herbicidas Bentazon e Nicosulfuron para Crotalaria juncea e Crotalaria spectabilis em consórcio com a cultura do milho

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Efeito de diferentes herbicidas, doses e volume de calda na dessecação de milheto [Pennisetum glaucum (L. Leek)]

The objective of this work was to evaluate the efficacy of different herbicides applied in post-emergence in the desiccation of pearl millet with different doses and spray volumes. For the desiccation, doses at 0, 25, 50 and 100% of the herbicide glyphosate (1,440 g ha-1) were used in 3 formulations (Original Round up, Round up Transorb and Round up WG), paraquat + diuron (500 + 250 g ha-1) and glufosinateammonium (800 g ha-1). In all treatments, 2 spray volumes (200 and 400 l ha-1) were used, and there was 1 treatment (control) without the application of herbicides. The treatment effects were evaluated visually at 3, 7, 14, 21 and 28 days after application (DAA). At the end of the evaluations, the dry mass of the plants was determined. The field trial was carried out in randomized block design. At the end of the study, at 28 DAA, all treatments presented total control of plant pearl millet, regardless of the dose and spray volume, except the treatments with paraquat + diuron and glufosinate-ammonium at the lower dose (25%), in 2 spray volumes, which nevertheless showed good and very good control, these two herbicides presenting an effect of volume, in which the control was higher with the use of smaller volume.

Aplicação de subdoses dos herbicidas glyphosate, 2,4-d e paraquat em algodoeiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Degradação urbana decorrente da atividade de mineração para a construção civil em Teresina - PI

Pós-graduação em Geografia - IGCE

Recurso natural, organização espacial e ordenamento territorial: mineração e degradação de terras na depressão interplanáltica semiárida do Alto Coreaú (CE)

Pós-graduação em Geografia - IGCE

Estudo da cinética de degradação da resina benzoxazina e seus compósitos nanoestruturados

The benzoxaxine resin is a new class of thermoset phenolic resin, which is presenting, in the lasts decades, a great application in the aircraft industry due mainly to its excellent mechanical and thermal properties. This resin associates the mechanical properties of epoxy resin with the thermal and flame retardant properties of phenolic resin. In this context, they are considered polymers of high performance and they are excellent candidates to replace the current thermoset matrices used in the processing of high performance composites. Thus, in this study nanostructured composites Benzoxazine/CNT were produced at different concentrations of functionalized and non-functionalized CNT (0,1%; 0,5% and 1,0% w/w). The thermal stability of the benzoxazine resin and its nanostructured composites was studied using thermogravimetry (TGA) and degradation kinetic model Ozawa-Wall-Flynn (O-W-F). The thermal characterization also included differential scanning calorimetry (DSC) and dynamic-mechanical analysis, infrared spectroscopy with Fourier transform (FTIR) and scanning electron microscopy (SEM).The introduction of non-functionalized CNT at low concentrations resulted in nanostructured composites with better thermal properties in relation to the neat resin. For all cases, however, the dispersion of CNT in the matrix was ineffective

Efeito de compostos inorgânicos, herbicidas e extratos foliares no desenvolvimento de microcystis aeruginosa e produção de microcistina

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Estudo da cinética de degradação da resina benzoxazina e seus compósitos nanoestruturados

The benzoxaxine resin is a new class of thermoset phenolic resin, which is presenting, in the lasts decades, a great application in the aircraft industry due mainly to its excellent mechanical and thermal properties. This resin associates the mechanical properties of epoxy resin with the thermal and flame retardant properties of phenolic resin. In this context, they are considered polymers of high performance and they are excellent candidates to replace the current thermoset matrices used in the processing of high performance composites. Thus, in this study nanostructured composites Benzoxazine/CNT were produced at different concentrations of functionalized and non-functionalized CNT (0,1%; 0,5% and 1,0% w/w). The thermal stability of the benzoxazine resin and its nanostructured composites was studied using thermogravimetry (TGA) and degradation kinetic model Ozawa-Wall-Flynn (O-W-F). The thermal characterization also included differential scanning calorimetry (DSC) and dynamic-mechanical analysis, infrared spectroscopy with Fourier transform (FTIR) and scanning electron microscopy (SEM).The introduction of non-functionalized CNT at low concentrations resulted in nanostructured composites with better thermal properties in relation to the neat resin. For all cases, however, the dispersion of CNT in the matrix was ineffective

Efeito de compostos inorgânicos, herbicidas e extratos foliares no desenvolvimento de microcystis aeruginosa e produção de microcistina

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

DESENVOLVIMENTO E AVALIAÇÃO DE ELETRODOS DE DIFUSÃO GASOSA (EDG) PARA GERAÇÃO DE H2O2 IN SITU E SUA APLICAÇÃO NA DEGRADAÇÃO DO CORANTE REATIVO AZUL 19

DEVELOPMENT AND EVALUATION OF GAS DIFFUSION ELECTRODES (GDE) FOR GENERATION OF H2O2 IN SITU AND THEIR APPLICATION IN THE DEGRADATION OF REACTIVE BLUE 19 DYE. This work reports the development of GDE for electrogeneration of H2O2 and their application in the degradation process of Reactive Blue 19 dye. GDE produced by carbon black with 20% polytetrafluoroethylene generated up to 500 mg L-1 of H2O2 through the electrolysis of acidic medium at -0.8 V vs Ag/AgCl. Reactive Blue 19 dye was degraded most efficiently with H2O2 electrogenerated in the presence of Fe(II) ions, leading to removal of 95% of the original color and 39% of TOC at -0.8 V vs Ag/AgCl.