Changes on transmittance mode of different composite resins

The purpose of this study was to evaluate the transmittance of seven different composite resins. Ten specimens were prepared (10 mm diameter, 2 mm thickness) for each experimental group, as follows: G1- Charisma® A 2 (Heraeus-Kulzer); G2- Filtek™ Supreme A 2E (3M/ESPE); G3- Filtek™ Supreme A2B (3M/ESPE); G4-Filtek™ Supreme YT (3M/ESPE); G5- Esthet-X® A2 (Dentsply); G6- Esthet-X® YE (Dentsply); G7- Durafill® A 2 (Heraeus-Kulzer) and G8- Filtek™ Z-100 A2 (3M/ESPE). The transmittance mode was measured using a UV-visible spectrophotometer (Cary Instruments) at 400-760 nm. The specimens were evaluated at three different times: zero hour (initial), 24 hours and 10 days after immersion in artificial saliva. The differences in transmittance were determined by two-way analysis of variance (ANOVA) and Tukey's test. The various composite resins showed significant differences in the wavelength dependence of transmittance. The mean values of transmittance increased significantly, with wavelengths increasing from 400 to 760 nm. The performance of the experimental groups was similar in terms of immersion time, considering that at time zero and after 10 days, all the groups showed similar results, which were statistically higher than the values obtained after 24 hours of immersion. The Filtek™ Supreme YT composite resin presented the highest mean transmittance values along the wavelengths at the three measured times. Esthet-X® YE and Durafill® yielded similar mean transmittance values, which were higher than those of the other groups. This study shows that the transmittance values of composite resins are directly related with the type, size and amount of inorganic filler particles.

Serum proteinogram of Chinese goose (Anser cygnoides) vaccinated or not against Newcastle disease

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A síndrome do hiperestímulo ovariano não influencia os resultados clínicos após ciclos de descongelamento de embriões provenientes de ciclos de ICSI

Objective: The objective of this study was evaluate if the embryos cryopreservation from OHSS patients Intracytoplasmic Sperm Injection (ICSI) cycles could be influence the clinical outcomes when compared to patients who receive oocytes from donors but the endometrium was not prepared and the embryos were cryopreserved. Methods: Fifty eight couples submitted to ICSI cycles in which 26 with OHSS clinical manifestation (OHSS group) and 32 couples who have received oocytes from donors (control group). The embryos were frozen on day+2 or +3of development. All patients included in this study had embryos crypreserved before the transfer, and in the thawing cycle, only the endometrium preparation was performed. The embryo survival, implantation, pregnancy and miscarriage rates were evaluated in the embryo thawing cycle. Results: There was no difference among the groups in relation to fertilization rate (OHSS: 71.89% ± 15.45, Control: 79.75% ± 21.68, p= 0.234), survival embryos rate (OHSS: 68.85 ± 21.10, Control: 59.53 ± 36.79, p= 0.233), high quality embryos rate (OHSS: 25.20 ± 23.90, Control: 27.40 ± 30.30, p= 0.760), implantation rate (OHSS: 17.9 ± 26.9, Control: 12.5 ± 23.7, p= 0.435), pregnancy rate (OHSS: 38.50, Control: 28.60, p= 0.441) and miscarriage rate (OHSS: 40.00, Control: 25.00, p= 0.332). Conclusion: Our findings suggest that clinical outcomes in freeze and thawing cycles were not affected by the presence of ovarian hyperstimulation syndrome clinical manifestation after controlled ovarian stimulation.

Osteoconductivity of modified fluorcanasite glass-ceramics for bone tissue augmentation and repair

Modified fluorcanasite glasses were fabricated by either altering the molar ratios of Na 2O and CaO or by adding P 2O 5 to the parent stoichiometric glass compositions. Glasses were converted to glass-ceramics by a controlled two-stage heat treatment process. Rods (2 mm x 4 mm) were produced using the conventional lost-wax casting technique. Osteoconductive 45S5 bioglass was used as a reference material. Biocompatibility and osteoconductivity were investigated by implantation into healing defects (2 mm) in the midshaft of rabbit femora. Tissue response was investigated using conventional histology and scanning electron microscopy. Histological and histomorphometric evaluation of specimens after 12 weeks implantation showed significantly more bone contact with the surface of 45S5 bioglass implants when compared with other test materials. When the bone contact for each material was compared between experimental time points, the Glass-Ceramic 2 (CaO rich) group showed significant difference (p = 0.027) at 4 weeks, but no direct contact at 12 weeks. Histology and backscattered electron photomicrographs showed that modified fluorcanasite glass-ceramic implants had greater osteoconductivity than the parent stoichiometric composition. Of the new materials, fluorcanasite glass-ceramic implants modified by the addition of P 2O 5 showed the greatest stimulation of new mineralized bone tissue formation adjacent to the implants after 4 and 12 weeks implantation. © 2010 Wiley Periodicals, Inc.

Regional integration and public policy. Evaluation of the European experience and possible implications for Latin American integration

Includes bibliography

Integración regional y políticas públicas: evaluación de la experiencia europea y posibles implicaciones para la integración latinoamericana

Incluye Bibliografía

Representaciones imaginarias de la interacción y violencia en la escuela

School violence research (sociopaedagogical and psychosocial perspectives) has not appropiately taken into account interpersonal and imaginary elements that may be extremely relevant for the understanding of this phenomena. This article analizes the imaginaries that articulates the violence of youth groups in a context of interpersonal relationships in the institutional space of a Rio Claro (Brazil) secondary school. The results are based on the analysis of four youth groups discourses, gathered in succesive group interviews, as well as the drawings made and pictures taken on their respective schools. They show a strong imaginary of generalized violence, in and out the school, with a representation of the school as unfair and aggressor and the students, aggressors themselves, as humiliated and undervalued.

Effect of dexmedetomidine on the minimum alveolar concentration of isoflurane in cats

This study reports the effects of dexmedetomidine on the minimum alveolar concentration of isoflurane (MAC iso) in cats. Six healthy adult female cats were used. MAC iso and dexmedetomidine pharmacokinetics had previously been determined in each individual. Cats were anesthetized with isoflurane in oxygen. Dexmedetomidine was administered intravenously using target-controlled infusions to maintain plasma concentrations of 0.16, 0.31, 0.63, 1.25, 2.5, 5, 10, and 20ng/mL. MAC iso was determined in triplicate at each target plasma dexmedetomidine concentration. Blood samples were collected and analyzed for dexmedetomidine concentration. The following model was fitted to the concentration-effect data: where MAC iso.c is MAC iso at plasma dexmedetomidine concentration C, MAC iso.0 is MAC iso in the absence of dexmedetomidine, I max is the maximum possible reduction in MAC iso, and IC 50 is the plasma dexmedetomidine concentration producing 50% of I max. Mean±SE MAC iso.0, determined in a previous study conducted under conditions identical to those in this study, was 2.07±0.04. Weighted mean±SE I max, and IC 50 estimated by the model were 1.76±0.07%, and 1.05±0.08ng/mL, respectively. Dexmedetomidine decreased MAC iso in a concentration-dependent manner. The lowest MAC iso predicted by the model was 0.38±0.08%, illustrating that dexmedetomidine alone is not expected to result in immobility in response to noxious stimulation in cats at any plasma concentration. © 2011 Blackwell Publishing Ltd.

Seleção de agentes alternativos ao ágar para propagação de plântulas de Cattleya loddigesii Lindley (Orchidaceae)

The aim of this study was to evaluate the in vitro growth of Cattleya loddigesii in alternative agents to agar with starch and physical matrix with acclimatization of regenerated plants. Protocorms with 90 days after sowing (0.5 cm of length) were subcultured in 1/2 MS culture medium among the treatments consisting of: agar 7 g L-1 (T1, which corresponds the control), agar 3,5 g L-1 with cassava starch 30 g L-1 (T2), cassava starch 60 g L-1 (T3), cotton fiber (T4) and chopped polyurethane foam (T5). Plantlets were retained in these treatments for over 150 days, and at the end of in vitro culture, were analyzed by their biometric data and acclimatized in a greenhouse during 120 days and evaluated the survival and relative growth rate (RGR). The substrate comprising of chopped polyurethane foam (T5) showed greater efficiency for growth in vitro and also increased survival rate, while substrate cassava starch (T3) provided delay for plantlet growth. Therefore, chopped polyurethane foam is recommended because of low cost and suitable characteristics for the propagation of Cattleya loddigesii.

Search for pair production of third-generation leptoquarks and top squarks in pp collisions at √s=7 TeV

Results are presented from a search for the pair production of third-generation scalar and vector leptoquarks, as well as for top squarks in R-parity-violating supersymmetric models. In either scenario, the new, heavy particle decays into a τ lepton and a b quark. The search is based on a data sample of pp collisions at √s=7 TeV, which is collected by the CMS detector at the LHC and corresponds to an integrated luminosity of 4.8 fb -1. The number of observed events is found to be in agreement with the standard model prediction, and exclusion limits on mass parameters are obtained at the 95% confidence level. Vector leptoquarks with masses below 760 GeV are excluded and, if the branching fraction of the scalar leptoquark decay to a τ lepton and a b quark is assumed to be unity, third-generation scalar leptoquarks with masses below 525 GeV are ruled out. Top squarks with masses below 453 GeV are excluded for a typical benchmark scenario, and limits on the coupling between the top squark, τ lepton, and b quark, λ333′ are obtained. These results are the most stringent for these scenarios to date. © 2013 CERN.

Una producción que produce otras: .... las artesanas del proyecto Timbi de Brasil

Relata las experiencias de un grupo informal de mujeres artesanas, especialistas en tapicería, que se transformaron en una Asociación Jurídica.

Marcha de absorção de macronutrientes e de micronutrientes em mudas de goiabeira Paluma e Século XXI

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Calagem na superfície para a cultura da soja, em semeadura direta sobre Brachiaria brizantha

Pós-graduação em Agronomia (Energia na Agricultura) - FCA