Avaliacao de dados de secagem de suspensoes de polpas de frutas em leito de jorro com alimentacao intermitente

The objective of this work was the development and improvement of the mathematical models based on mass and heat balances, representing the drying transient process fruit pulp in spouted bed dryer with intermittent feeding. Mass and energy balance for drying, represented by a system of differential equations, were developed in Fortran language and adapted to the condition of intermittent feeding and mass accumulation. Were used the DASSL routine (Differential Algebraic System Solver) for solving the differential equation system and used a heuristic optimization algorithm in parameter estimation, the Particle Swarm algorithm. From the experimental data food drying, the differential models were used to determine the quantity of water and the drying air temperature at the exit of a spouted bed and accumulated mass of powder in the dryer. The models were validated using the experimental data of drying whose operating conditions, air temperature, flow rate and time intermittency, varied within the limits studied. In reviewing the results predicted, it was found that these models represent the experimental data of the kinetics of production and accumulation of powder and humidity and air temperature at the outlet of the dryer

Determinação de dados de equilíbrio de fases para sistemas aquosos com eletrólitos

In the present work are established initially the fundamental relationships of thermodynamics that govern the equilibrium between phases, the models used for the description of the behavior non ideal of the liquid and vapor phases in conditions of low pressures. This work seeks the determination of vapor-liquid equilibrium (VLE) data for a series of multicomponents mixtures of saturated aliphatic hydrocarbons, prepared synthetically starting from substances with analytical degree and the development of a new dynamic cell with circulation of the vapor phase. The apparatus and experimental procedures developed are described and applied for the determination of VLE data. VLE isobarics data were obtained through a Fischer s ebulliometer of circulation of both phases, for the systems pentane + dodecane, heptane + dodecane and decane + dodecane. Using the two new dynamic cells especially projected, of easy operation and low cost, with circulation of the vapor phase, data for the systems heptane + decane + dodecane, acetone + water, tween 20 + dodecane, phenol + water and distillation curves of a gasoline without addictive were measured. Compositions of the equilibrium phases were found by densimetry, chromatography, and total organic carbon analyzer. Calibration curves of density versus composition were prepared from synthetic mixtures and the behavior excess volumes were evaluated. The VLE data obtained experimentally for the hydrocarbon and aqueous systems were submitted to the test of thermodynamic consistency, as well as the obtained from the literature data for another binary systems, mainly in the bank DDB (Dortmund Data Bank), where the Gibbs-Duhem equation is used obtaining a satisfactory data base. The results of the thermodynamic consistency tests for the binary and ternary systems were evaluated in terms of deviations for applications such as model development. Later, those groups of data (tested and approved) were used in the KijPoly program for the determination of the binary kij parameters of the cubic equations of state original Peng-Robinson and with the expanded alpha function. These obtained parameters can be applied for simulation of the reservoirs petroleum conditions and of the several distillation processes found in the petrochemistry industry, through simulators. The two designed dynamic cells used equipments of national technology for the determination of VLE data were well succeed, demonstrating efficiency and low cost. Multicomponents systems, mixtures of components of different molecular weights and also diluted solutions may be studied in these developed VLE cells

Estudo da viabilidade da destilação solar para polimento de águas produzidas de petróleo

This work study of solar distillation feasibility in effluent of petroleum industry: produced water, making possible your reuse for irrigation of oleaginous cultures or fodder crops or in steam generation, as well the transport phenomena involved. The methodology for development of this project was to characterize the effluent to be treated and to accomplish physical and chemical analysis in the distilled, to build distillation equipment, concomitant operation of both equipments and implementation of data processing and economical evaluation. The methodology used for all parameters is outlined in APHA (1998) and sampling of the type compound. The feeding of distillation equipment was performed with treated effluent from UTPF of Guamaré. The temperature was monitored throughout the distillers and during the time of operation. The distillers feed occur, as a rule, for sifon. The distillers were operated by a period of 17 months between July 2007 and February 2009, in which 40 experiments were performed. The radiation and temperature datas were acquired in the INPE s site and the temperature inside of the distillers was registered by DATALOGGER Novus. The rates of condensation (mL / min) were determined by measuring of the flow in a graduate test tube of 10 mL and a chronometer. We used two simple solar effect distillers of passive type with different angles in coverage: 20 ° and 45 °. The results obtained in this study and the relevant discussions are divided into six topics: sample characterization and quality of distilled; construction of distillers; operation (data, temperature profile), climatic aspects, treatment of data and economical analysis. Results obtained can be inferred that: the energy loss by the adoption of vessel glass was not significant, however, complicates the logistics of maintenance the equipment on a large scale. In the other hand, the surface of the tub with a glass shield on the equipment deterioration, both devices showed similar performance, so there is not justified for use of equipment 450. With regard to the climatological study it was verified that the Natal city presents monthly medium radiation varying in a range between 350 and 600 W/m2, and medium of wind speed of 5 m / s. The medium humidity is around 70% and rainfall is very small. The regime of the system is transient and although it has been treated as a stationary system shows that the model accurately represents the distillers system's 20 degrees. The quality of the distilled with regard to the parameters evaluated in this study is consistent with the Class 3 waters of CONAMA (Resolution 357). Therefore we can conclude that solar distillation has viability for treat oilfield produced water when considered the technical and environmental aspects, although it is not economically viable

Equilíbrio líquido-líquido de sistemas aquosos com tensoativos polietoxilados: dados experimentais e modelagem

The nonionic surfactants when in aqueous solution, have the property of separating into two phases, one called diluted phase, with low concentration of surfactant, and the other one rich in surfactants called coacervate. The application of this kind of surfactant in extraction processes from aqueous solutions has been increasing over time, which implies the need for knowledge of the thermodynamic properties of these surfactants. In this study were determined the cloud point of polyethoxylated surfactants from nonilphenolpolietoxylated family (9,5 , 10 , 11, 12 and 13), the family from octilphenolpolietoxylated (10 e 11) and polyethoxylated lauryl alcohol (6 , 7, 8 and 9) varying the degree of ethoxylation. The method used to determine the cloud point was the observation of the turbidity of the solution heating to a ramp of 0.1 ° C / minute and for the pressure studies was used a cell high-pressure maximum ( 300 bar). Through the experimental data of the studied surfactants were used to the Flory - Huggins models, UNIQUAC and NRTL to describe the curves of cloud point, and it was studied the influence of NaCl concentration and pressure of the systems in the cloud point. This last parameter is important for the processes of oil recovery in which surfactant in solution are used in high pressures. While the effect of NaCl allows obtaining cloud points for temperatures closer to the room temperature, it is possible to use in processes without temperature control. The numerical method used to adjust the parameters was the Levenberg - Marquardt. For the model Flory- Huggins parameter settings were determined as enthalpy of the mixing, mixing entropy and the number of aggregations. For the UNIQUAC and NRTL models were adjusted interaction parameters aij using a quadratic dependence with temperature. The parameters obtained had good adjust to the experimental data RSMD < 0.3 %. The results showed that both, ethoxylation degree and pressure increase the cloudy points, whereas the NaCl decrease

Professores da habilitação de magistério de 2º grau: dados pessoais e relações com o processo educativo

O artigo relata parte de estudo desenvolvido junto ao Núcleo de Ensino de Araraquara para caracterizar o professorado que atua em cursos de Magistério (antigo Normal). Por meio de questionários foram obtidas e analisadas informações relativas a sexo, idade, estado civil, experiências anteriores e responsabilidade pelo sustento da família. A análise focaliza relações com o processo educativo, com outros estudos e com aspectos extra-escolares.

Determinação de Dados de Equilíbrio Líquido-Vapor para Sistemas Hidrocarbonetos e Desenvolvimento de uma Nova Célula Dinâmica

In the present work are established initially the fundamental relationships of thermodynamics that govern the equilibrium between phases, the models used for the description of the behavior non ideal of the liquid and vapor phases in conditions of low pressures. This work seeks the determination of vapor-liquid equilibrium (VLE) data for a series of multicomponents mixtures of saturated aliphatic hydrocarbons, prepared synthetically starting from substances with analytical degree and the development of a new dynamic cell with circulation of the vapor phase. The apparatus and experimental procedures developed are described and applied for the determination of VLE data. VLE isobarics data were obtained through a Fischer's ebulliometer of circulation of both phases, for the systems pentane + dodecane, heptane + dodecane and decane + dodecane. Using the two new dynamic cells especially projected, of easy operation and low cost, with circulation of the vapor phase, data for the systems heptane + decane + dodecane, acetone + water, tween 20 + dodecane, phenol + water and distillation curves of a gasoline without addictive were measured. Compositions of the equilibrium phases were found by densimetry, chromatography, and total organic carbon analyzer. Calibration curves of density versus composition were prepared from synthetic mixtures and the behavior excess volumes were evaluated. The VLE data obtained experimentally for the hydrocarbon and aqueous systems were submitted to the test of thermodynamic consistency, as well as the obtained from the literature data for another binary systems, mainly in the bank DDB (Dortmund Data Bank), where the Gibbs-Duhem equation is used obtaining a satisfactory data base. The results of the thermodynamic consistency tests for the binary and ternary systems were evaluated in terms of deviations for applications such as model development. Later, those groups of data (tested and approved) were used in the KijPoly program for the determination of the binary kij parameters of the cubic equations of state original Peng-Robinson and with the expanded alpha function. These obtained parameters can be applied for simulation of the reservoirs petroleum conditions and of the several distillation processes found in the petrochemistry industry, through simulators. The two designed dynamic cells used equipments of national technology for the determination Humberto Neves Maia de Oliveira Tese de Doutorado PPGEQ/PRH-ANP 14/UFRN of VLE data were well succeed, demonstrating efficiency and low cost. Multicomponents systems, mixtures of components of different molecular weights and also diluted solutions may be studied in these developed VLE cells

Opiniões sobre estágio curricular e prática de ensino na licenciatura em química: o caso do CEFET-PB

The Brazilian legal documents are directing the reformulation of the courses that prepare students to be teachers. Through out the country many institutions look for to fit themselves in such documents. On the other hand, other IES (Superior Education Institutions), when they are setting up such courses they looked for to be adequate to the new public politics. Based on the National Curricular Norms to form teachers for Basic Education, in tertiary level, in 2004 it was created at the CEFET-PB,the Chemistry Course (Licenciatura) to prepare people to be teachers, whose organization. This work presents the results of a research of phenomenological nature that aimed to comprehend the teachers opinions, in the range of discussions about the current politics of formation, particularly related to the CNE/CP 1 and CNE/CP 2/2002 resolutions. This work based on the curricular proposal for the Chemistry Course (Licenciatura), presents the relationship between the probationary period and the teaching practice at the CEFET-PB, in order to contribute for a reflection about these categories to clarify the teachers of the course. It started from the consideration of all changes operated in contemporary society implies changes on teacher's pedagogical practices. It was used tow instruments for the data collection: a questionnaire with open and closed questions and recordable interviews. Nine teachers form the CEFET-PB took apart and four licensed teachers. It was based in a theoretic frame as a support for discussions about the different models of teachers formation. We concluded that the representations of teachers about probationary period the practice on the activity for the teachers formation was strongly anchored in characteristic elements of the formative tendency of a institution that historically acted on a technician formation, and the results pointed to strong signs of attitudes based on a model of the technical rationality

Orientação de imagens CBERS-2B usando o modelo rigoroso de colinearidade com dados orbitais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapeamento do biovolume de plantas aquáticas submersas a partir de dados hidroacústicos e imagem multiespectral de alta resolução

As plantas aquáticas têm papel fundamental no equilíbrio dos ecossistemas, porém seu crescimento desequilibrado pode obstruir canais, represas e reservatórios e afetar múltiplos usos da água. em relação a plantas aquáticas submersas, a utilização de medidas de controle torna-se mais complexa, em face da dificuldade em mapear e quantificar volumetricamente as áreas colonizadas. Nessas situações, considera-se que o uso de dados hidroacústicos possibilite o mapeamento e a mensuração dessas áreas, auxiliando na elaboração de propostas de manejo sustentáveis desse tipo de vegetação aquática. Assim, o presente trabalho utilizou dados acústicos e a técnica de krigagem para realizar a inferência espacial do biovolume de plantas aquáticas submersas. Os dados foram obtidos em três levantamentos ecobatimétricos realizados em uma área de estudos localizada no rio Paraná, caracterizada por condições favoráveis para proliferação de vegetação aquática submersa e dificuldade de navegação. Para delimitar as áreas caracterizadas pela presença de plantas aquáticas submersas, utilizou-se uma imagem multiespectral de alta resolução espacial World View-2. O mapeamento do biovolume das plantas aquáticas submersas nas áreas de ocorrência do fenômeno foi realizado a partir da inferência do biovolume por krigagem e do fatiamento dos valores inferidos em intervalos de 15%. A partir do mapa gerado, foi possível identificar os locais de maior concentração de macrófitas submersas, com predominância de valores de biovolume entre 15-30% e 30-45%, confirmando a viabilidade da utilização da krigagem na inferência espacial do biovolume, a partir de medidas ecobatimétricas georreferenciadas e com o suporte de imagem de alta resolução espacial.

Integração de imagem aérea de alta resolução e dados de varredura a laser na classificação de cenas urbanas para detectar regiões de via

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Extração automática de contornos de telhados usando dados de varredura a laser e campos randômicos de Markov

This paper proposes a methodology for automatic extraction of building roof contours from a Digital Elevation Model (DEM), which is generated through the regularization of an available laser point cloud. The methodology is based on two steps. First, in order to detect high objects (buildings, trees etc.), the DEM is segmented through a recursive splitting technique and a Bayesian merging technique. The recursive splitting technique uses the quadtree structure for subdividing the DEM into homogeneous regions. In order to minimize the fragmentation, which is commonly observed in the results of the recursive splitting segmentation, a region merging technique based on the Bayesian framework is applied to the previously segmented data. The high object polygons are extracted by using vectorization and polygonization techniques. Second, the building roof contours are identified among all high objects extracted previously. Taking into account some roof properties and some feature measurements (e. g., area, rectangularity, and angles between principal axes of the roofs), an energy function was developed based on the Markov Random Field (MRF) model. The solution of this function is a polygon set corresponding to building roof contours and is found by using a minimization technique, like the Simulated Annealing (SA) algorithm. Experiments carried out with laser scanning DEM's showed that the methodology works properly, as it delivered roof contours with approximately 90% shape accuracy and no false positive was verified.

Predição de sombras de edifícios sobre vias urbanas com base em modelos digitais de elevações e dados de imagens aéreas de alta resolução

This research presents a methodology for prediction of building shadows cast on urban roads existing on high-resolution aerial imagery. Shadow elements can be used in the modeling of contextual information, whose use has become more and more common in image analysis complex processes. The proposed methodology consists in three sequential steps. First, the building roof contours are manually extracted from an intensity image generated by the transformation of a digital elevation model (DEM) obtained from airborne laser scanning data. In similarly, the roadside contours are extracted, now from the radiometric information of the laser scanning data. Second, the roof contour polygons are projected onto the adjacent roads by using the parallel projection straight lines, whose directions are computed from the solar ephemeris, which depends on the aerial image acquisition time. Finally, parts of shadow polygons that are free from building perspective obstructions are determined, given rise to new shadow polygons. The results obtained in the experimental evaluation of the methodology showed that the method works properly, since it allowed the prediction of shadow in high-resolution imagery with high accuracy and reliability.

Uso de dados fotogramétricos no refinamento geométrico de contornos de telhados de edifícios extraídos de dados laser

In this paper, a methodology is proposed for the geometric refinement of laser scanning building roof contours using high-resolution aerial images and Markov Random Field (MRF) models. The proposed methodology takes for granted that the 3D description of each building roof reconstructed from the laser scanning data (i.e., a polyhedron) is topologically correct and that it is only necessary to improve its accuracy. Since roof ridges are accurately extracted from laser scanning data, our main objective is to use high-resolution aerial images to improve the accuracy of roof outlines. In order to meet this goal, the available roof contours are first projected onto the image-space. After that, the projected polygons and the straight lines extracted from the image are used to establish an MRF description, which is based on relations ( relative length, proximity, and orientation) between the two sets of straight lines. The energy function associated with the MRF is minimized by using a modified version of the brute force algorithm, resulting in the grouping of straight lines for each roof object. Finally, each grouping of straight lines is topologically reconstructed based on the topology of the corresponding laser scanning polygon projected onto the image-space. The preliminary results showed that the proposed methodology is promising, since most sides of the refined polygons are geometrically better than corresponding projected laser scanning straight lines.

Orientação indireta de imagens com uso de apoio fotogramétrico extraído a partir da integração de dados derivados do sistema lidar e fotogrametria

In this work a method is proposed to allow the indirect orientation of images using photogrammetric control extracted through integration of data derived from Photogrammetry and Light Detection and Ranging (LiDAR) system. The photogrammetric control is obtained by using an inverse photogrammetric model, which allows the projection of image space straight lines onto the object space. This mathematical model is developed based on the intersection between the collinearity-based straight line and a DSM of region, derived from LiDAR data. The mathematical model used in the indirect orientation of the image is known as the model of equivalent t planes. This mathematical model is based on the equivalence between the vector normal to the projection plane in the image space and to the vector normal to the rotated projection plane in the object space. The goal of this work is to verify the quality, efficiency and potential of photogrammetric control straight lines obtained with proposed method applied to the indirect orientation of images. The quality of generated photogrammetric control was statistically available and the results showed that proposed method is promising and it has potential for the indirect orientation of images.

A argumentação como elemento discursivo na mídia digital: um estudo sobre o blog fatos e dados

This thesis studies the use of argumentation as a discursive element in digital media, particularly blogs. We analyzed the Blog "Fatos e Dados" [Facts and Data], created by Petrobras in the context of allegations of corruption that culminated in the installation of a Parliamentary Commission of Inquiry to investigate the company within the Congress. We intend to understand the influence that the discursive elements triggered by argumentation exercise in blogs and about themes scheduling. To this end, we work with notions of argumentation in dialogue with questions of language and discourse from the work of Charaudeau (2006), Citelli (2007), Perelman & Olbrechts-Tyteca (2005), Foucault (2007, 2008a), Bakhtin (2006) and Breton (2003). We also observe our subject from the perspective of social representations, where we seek to clarify concepts such as public image and the use of representations as argumentative elements, considering the work of Moscovici (2007). We also consider reflections about hypertext and the context of cyberculture, with authors such as Levy (1993, 1999, 2003), Castells (2003) and Chartier (1999 and 2002), and issues of discourse analysis, especially in Orlandi (1988, 1989, 1996 and 2001), as well as Foucault (2008b). We analyzed 118 posts published in the first 30 days of existence of the blog "Fatos e Dados" (between 2 June and 1 July 2009), and analyzed in detail the top ten. A corporate blog aims to defend the points of view and public image of the organization, and, therefore, uses elements of social representations to build their arguments. It goes beyond the blog, as the main news criteria, including the posts we reviewed, the credibility of Petrobras as the source of information. In the posts analyzed, the news values of innovation and relevance also arise. The controversy between the Blog and the press resulted from an inadequacy and lack of preparation of media to deal with a corporate blog that was able to explore the characteristics of liberation of the emission pole in cyberculture. The Blog is a discursive manifestation in a concrete historical situation, whose understanding and attribution of meaning takes place from the social relations between subjects that, most of the time, place themselves in discursive and ideological dispute between each other - this dispute also affects the movements of reading and reading production. We conclude that intersubjective relationships that occur in blogs change, in the form of argumentative techniques used, the notions of news criteria, interfering with scheduling of news and organization of information in digital media outlets. It is also clear the influence that the discursive elements triggered by argumentation exercise in digital media, trying to resize and reframe frames of reality conveyed by it in relation to the subject-readers. Blogs have become part of the scenario information with the emergence of the Internet and are able to interfere in a more effective way to organize the scheduling of media from the conscious utilization of argumentative elements in their posts