Influence of thymol and silver nanoparticles on the degradation of poly(lactic acid) based nanocomposites: thermal and morphological properties

Biopolymers, such as poly(lactic acid) (PLA), have been proposed as environmentally-friendly alternatives in applications such as food packaging. In this work, silver nanoparticles and thymol were used as active additives in PLA matrices, combining the antibacterial activity of silver with the antioxidant performance of thymol. The combined action of both additives influenced PLA thermal degradation in ternary systems. DSC results showed that the addition of thymol resulted in a clear decrease of the glass transition temperature (Tg) of PLA, suggesting its plasticizing effect in PLA matrices. Slight modifications in mechanical properties of dog-bone bars were also observed after the addition of the active components, especially in the elastic modulus. FESEM analyses showed the good distribution of active additives through the PLA matrix, obtaining homogenous surfaces and highlighting the presence of silver nanoparticles successfully embedded into the bulk matrix. Degradation of these PLA-based nanocomposites with thymol and silver nanoparticles in composting conditions indicated that the inherent biodegradable character of this biopolymer was improved after this modification. The obtained nanocomposites showed suitable properties to be used as biodegradable active-food packaging systems with antioxidant and antimicrobial effects.

Characterization and ageing study of poly(lactic acid) films plasticized with oligomeric lactic acid

Poly(lactic acid) (PLA) was melt-blended with a bio-based oligomeric lactic acid (OLA) plasticizer at different concentrations between 15 wt% and 25 wt% in order to enhance PLA ductility and to get a fully biodegradable material with potential application in films manufacturing. OLA was an efficient plasticizer for PLA, as it caused a significant decrease on glass transition temperature (Tg) while improving considerably ductile properties. Only one Tg value was observed in all cases and no apparent phase separation was detected. Films obtained by compression moulding were stored during 3 months under ambient controlled conditions and thermal, mechanical, structural and oxygen barrier properties were studied in order to evaluate the stability of the PLA–OLA films over time. Blends with 20 and 25 wt% OLA remained stable and compatible with PLA within the ageing period. Besides, PLA–20 wt% OLA formulation was the only one which maintained its amorphous state with adequate thermal, mechanical and oxygen barrier properties for flexible films manufacturing.

Wind Shear, Gust, and Yaw-Induced Dynamic Stall on Wind-Turbine Blades

This study examined the effect of a spanwise angle of attack gradient on the growth and stability of a dynamic stall vortex in a rotating system. It was found that a spanwise angle of attack gradient induces a corresponding spanwise vorticity gradient, which, in combination with spanwise flow, results in a redistribution of circulation along the blade. Specifically, when modelling the angle of attack gradient experienced by a wind turbine at the 30% span position during a gust event, the spanwise vorticity gradient was aligned such that circulation was transported from areas of high circulation to areas of low circulation, increasing the local dynamic stall vortex growth rate, which corresponds to an increase in the lift coefficient, and a decrease in the local vortex stability at this point. Reversing the relative alignment of the spanwise vorticity gradient and spanwise flow results in circulation transport from areas of low circulation generation to areas of high circulation generation, acting to reduce local circulation and stabilise the vortex. This circulation redistribution behaviour describes a mechanism by which the fluctuating loads on a wind turbine are magnified, which is detrimental to turbine lifetime and performance. Therefore, an understanding of this phenomenon has the potential to facilitate optimised wind turbine design.

From Convergence to Diffusion: The EU's influence on national tax systems. ACES Cases No. 2011.2

In this article I investigate to what extent European Integration stimulates policy convergence and diffusion of various forms of tax policy. Using a mixed-methods design, I find that several causal mechanisms contribute to an EU-wide diffusion of tax policies: imposition, competition, harmonization and learning/communication. I show that these mechanisms have different effects on different forms of taxation. Even if the ultimate outcome of this influence only in few cases leads to unconditional convergence, the EU has markedly accelerated policy diffusion among its member states.

The Fate of Greece in a ‘Genuine Economic and Monetary Union’: Lessons from a small island state. CEPS Hi-Level Brief, 19 June 2015 Friday, 19 June 2015

As the Greek debt drama reaches another supposedly decision point, Daniel Gros urges creditors (and indeed all policy-makers) to think about the long term and poses one key question in this CEPS High-Level Brief: What can be gained by keeping Greece inside the euro area at “whatever it takes”? As he points out, the US, with its unified politics and its federal fiscal transfer system, is often taken as a model for the Eurozone, and it is thus instructive to consider the longer-term performance of an area of the US which has for years been kept afloat by massive transfers, and which is now experiencing a public debt crisis. The entity in question is Puerto Rico, which is an integral part of the US in all relevant economic dimensions (currency, economic policy, etc.). The dismal fiscal and economic performance of Puerto Rico carries two lessons: 1) Keeping Greece in the eurozone by increasing implicit subsidies in the form of debt forgiveness might create a low-growth equilibrium with increasing aid dependency. 2) It is wrong to assume that, further integration, including a fiscal and political union, would be sufficient to foster convergence, and prevent further problems of the type the EU is experiencing with Greece.

Detrital zircon geochronology data, petrographic point count data and paleocurrent indicator data of Triassic turbidites in the Nanpanjiang Basin, South China

Triassic turbidites of the Nanpanjiang basin of south China represent the most expansive and voluminous siliciclastic turbidite accumulation in south China. The Nanpanjiang basin occurs at a critical junction between the southern margin of the south China plate and the Indochina, Siamo and Sibumasu plates to the south and southwest. The Triassic Yangtze carbonate shelf and isolated carbonated platforms in the basin have been extensively studied, but silicilastic turbidites in the basin have received relatively little attention. Deciphering the facies, paleocurrent indicators and provenance of the Triassic turbidites is important for several reasons: it promises to help resolve the timing of plate collisions along suture zones bordering the basin to the south and southwest, it will enable evaluation of which suture zones and Precambrian massifs were source areas, and it will allow an evaluation of the impact of the siliciclastic flux on carbonate platform evolution within the basin. Turbidites in the basin include the Early Triassic Shipao Formation and the Middle-Late Triassic Baifeng, Xinyuan, Lanmu Bianyang and Laishike formations. Each ranges upward of 700 m and the thickest is nearly 3 km. The turbidites contain very-fine sand in the northern part of the basin whereas the central and southern parts of the basin also commonly contain fine and rarely medium sand size. Coarser sand sizes occur where paleocurrents are from the south, and in this area some turbidites exhibit complete bouma sequences with graded A divisions. Successions contain numerous alternations between mud-rich and sand-rich intervals with thickness trends corresponding to proximal/ distal fan components. Spectacularly preserved sedimentary structures enable robust evaluation of turbidite systems and paleocurrent analyses. Analysis of paleocurrent measurements indicates two major directions of sediment fill. The northern part of the basin was sourced primarily by the Jiangnan massif in the northeast, and the central and southern parts of the basin were sourced primarily from suture zones and the Yunkai massif to the south and southeast respectively. Sandstones of the Lower Triassic Shipao Fm. have volcaniclastic composition including embayed quartz and glass shards. Middle Triassic sandstones are moderately mature, matrix-rich, lithic wackes. The average QFL ratio from all point count samples is 54.1/18.1/27.8% and the QmFLt ratio is 37.8/ 18.1/ 44.1%. Lithic fragments are dominantly claystone and siltstone clasts and metasedimentary clasts such as quartz mica tectonite. Volcanic lithics are rare. Most samples fall in the recycled orogen field of QmFLt plots, indicating a relatively quartz and lithic rich composition consistent with derivation from Precambrian massifs such as the Jiangnan, and Yunkai. A few samples from the southwest part of the basin fall into the dissected arc field, indicating a somewhat more lithic and feldspar-rich composition consistent with derivation from a suture zone Analysis of detrial zircon populations from 17 samples collected across the basin indicate: (1) Several samples contain zircons with concordant ages greater than 3000 Ma, (2) there are widespread peaks across the basin at 1800 Ma and 2500, (3) a widespread 900 Ma population, (3) a widespread population of zircons at 440 Ma, and (5) a larger population of younger zircons about 250 Ma in the southwestern part which is replaced to the north and northwest by a somewhat older population around 260-290 Ma. The 900 Ma provenance fits derivation from the Jiangnan Massif, the 2500, 1800, and 440 Ma provenance fits the Yunkai massif, and the 250 Ma is consistent with convergence and arc development in suture zones bordering the basin on the south or southwest. Early siliciclastic turbidite flux, proximal to source areas impacted carbonate platform evolution by infilling the basin, reducing accommodation space, stabilizing carbonate platform margins and promoting margin progradation. Late arrival, in areas far from source areas caused margin aggradation over a starved basin, development of high relief aggradational escarpments and unstable scalloped margins.

(Table 1) Magnetic properties and Curie temperatures of basalts from DSDP Leg 65 holes

During DSDP Leg 65, we achieved significant basement penetration at three sites (482, 483, and 485) in the mouth of the Gulf of California (Lewis and Robinson, 1983, doi:10.2973/dsdp.proc.65.1983). Since these holes were all drilled into extremely young crust near the crest of the East Pacific Rise, the rocks we recovered present an unusual opportunity to study the magnetic properties of submarine basalts before alteration has become pervasive. To take advantage of this opportunity and to complement the paleomagnetic studies conducted on these basalts by Day (1983, doi:10.2973/dsdp.proc.65.138.1983), we have studied, in the same samples, the following properties: saturation magnetization (Js); intensity and stability of isothermal remanent magnetization (IRM); hysteresis parameters, such as the coercive force (Hc), the remanent coercive force (HRC), and the ratio of saturation remanence (JRS) to saturation magnetization; susceptibility (x); and Curie temperature (Tc). In this chapter we will discuss the results of these studies in conjunction with the opaque mineralogy of the samples.

Age dating and isotopic analyses of sediment core RC11-120

Using the concept of 'orbital tuning', a continuous, high-resolution deep-sea chronostratigraphy has been developed spanning the last 300,000 yr. The chronology is developed using a stacked oxygen-isotope stratigraphy and four different orbital tuning approaches, each of which is based upon a different assumption concerning the response of the orbital signal recorded in the data. Each approach yields a separate chronology. The error measured by the standard deviation about the average of these four results (which represents the 'best' chronology) has an average magnitude of only 2500 yr. This small value indicates that the chronology produced is insensitive to the specific orbital tuning technique used. Excellent convergence between chronologies developed using each of five different paleoclimatological indicators (from a single core) is also obtained. The resultant chronology is also insensitive to the specific indicator used. The error associated with each tuning approach is estimated independently and propagated through to the average result. The resulting error estimate is independent of that associated with the degree of convergence and has an average magnitude of 3500 yr, in excellent agreement with the 2500-yr estimate. Transfer of the final chronology to the stacked record leads to an estimated error of +/-1500 yr. Thus the final chronology has an average error of +/-5000 yr.

Democratic governance and the rule of law : lessons from Colombia /

"Colombia has experienced conflict for decades. In the 1990s it was a paradigm of the failing state, beset with all manner of troubles: terrorism, kidnapping, murder, drug trafficking, corruption, an economic downturn of major scope, general lawlessness, and brain drain. Today the country is much safer, and the agents of violence are clearly on the defensive. Nonetheless, much work lies ahead to secure the democratic system. Security and the rule of law are fundamental to the task. As the monopoly over the legitimate use of force is established, democratic governance also needs the architecture of law: ministry of justice, courts, legislative scrutiny, law enforcement agencies, regulatory bodies, public defenders, police, correctional system, legal statutes, contracts, university level academic education to train lawyers, judges, and investigators, along with engagement with civil society to promote a culture of lawfulness. Security without the rule of law puts a society at risk of falling into a Hobbesian hell."--P. v.

Guide to rebuilding public sector services in stability operations : a role for the military /

This guide examines the role of restoration of public services within the broader context of stability operations. The extent to which public service reconstruction takes place depends on the mission, the level of resources, and the host country context. This paper provides guidance helpful to U.S. peacekeeping personnel in planning and executing stability operations tasks related to restoration of public sector services and infrastructure. It is designed to supplement existing and emerging guidance, and is specifically relevant to addressing the needs of public sector rebuilding in a post-conflict situation by peacekeeping forces. The material presented here draws both from theory and analytic frameworks and from on-the-ground experience of practitioners.

The value and destiny of the individual : the Gifford lectures for 1912 delivered in Edinburgh university /

"The present course of lectures is a continuation ... of the ... previous course, which was published under the title 'The principle of individuality and value.'"--Pref.

Atomic power and energy resource planning /

Previously "published by the Joint Economic Committee in Federal Expenditure Policy for Economic Growth and Stability, Papers Submitted by Panelists Appearing before the Subcommittee on Fiscal Policy (Government Printing Office, Washington, D.C., November 5, 1957)."

Preparation and catalytic properties of ZrO2-Al2O3 composite oxide supported nickel catalysts for methane reforming with carbon dioxide

ZrO2-Al2O3 composite oxides and supported Ni catalysts were prepared, and characterized by N-2 adsorption/desorption, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques. The catalytic performance and carbon deposition was also investigated. This mesoporous composite oxide is shown to be a promising catalyst support. An increase in the catalytic activity and stability of methane and carbon dioxide reforming reaction was resulted from the zirconia addition, especially at 5wt% ZrO2 content. The Ni catalyst supported ZrO2-Al2O3 has a strong resistance to sintering and the carbon deposition in a relatively long-term reaction.

Core stability exercise in chronic low back pain

Exercise is commonly used in the management of chronic musculoskeletal conditions, including chronic low back pain (CLBP). The focus of exercise is varied and may include parameters ranging from strength and endurance training, to specific training of muscle coordination and control. The assumption underpinning these approaches is that improved neuromuscular function will restore or augment the control and support of the spine and pelvis. In a biomechanical model of CLBP, which assumes that pain recurrence is caused by repeated mechanical irritation of pain sensitive structures [1], it is proposed that this improved control and stability would reduce mechanical irritation and lead to pain relief [1]. Although this model provides explanation for the chronicity of LBP, perpetuation of pain is more complex, and contemporary neuroscience holds the view that chronic pain is mediated by a range of changes including both peripheral (eg, peripheral sensitization) and central neuroplastic changes [2]. Although this does not exclude the role of improved control of the lumbar spine and pelvis in management of CLBP, particularly when there is peripheral sensitization, it highlights the need to look beyond outdated simplistic models. One factor that this information highlights is that the refinement of control and coordination may be more important than simple strength and endurance training for the trunk muscles. The objective of this article is to discuss the rationale for core stability exercise in the management of CLBP, to consider critical factors for its implementation, and to review evidence for efficacy of the approach.

Numerical methods for strong solutions of stochastic differential equations: an overview

This paper gives a review of recent progress in the design of numerical methods for computing the trajectories (sample paths) of solutions to stochastic differential equations. We give a brief survey of the area focusing on a number of application areas where approximations to strong solutions are important, with a particular focus on computational biology applications, and give the necessary analytical tools for understanding some of the important concepts associated with stochastic processes. We present the stochastic Taylor series expansion as the fundamental mechanism for constructing effective numerical methods, give general results that relate local and global order of convergence and mention the Magnus expansion as a mechanism for designing methods that preserve the underlying structure of the problem. We also present various classes of explicit and implicit methods for strong solutions, based on the underlying structure of the problem. Finally, we discuss implementation issues relating to maintaining the Brownian path, efficient simulation of stochastic integrals and variable-step-size implementations based on various types of control.